Construction Method of Civil Aircraft Airborne⁃system Supplier Development Process System

Based on the analysis of the development process system status of domestic and foreign civil aircraft airborne system suppliers,this paper proposes the overall construction idea of"a set of civil aircraft process system"based on IPD(Integrated product development)in the organization.The development stage,process,activity and task are the logical framework elements of the system construction."Based on process decomposition,vertical stratification,horizontal segmentation,combination of special and common,process customized to tools,role and process integration,giving full consideration to the interface between supplier management and process modules"etc.are the concrete ideas.Moreover,formulate top⁃level system construction standards,implemented by process system management tool platform,so that the process system and development work can be effectively integrated to effectively guide the development work of airborne system suppliers,and meet the quality and airworthiness requirements of civil aircraft development.Through the development application of a certain type of flight control system,the process system and tool platform were verified and optimized in practice.

Dynamic propagation velocity of a positive streamer in a 3 m air gap under lightning impulse voltage

Streamers represent an important stage in the initiation of gap discharge. In this work, we used an eight-frame intensified charge-coupled device camera to capture the streamer development process when a lightning impulse voltage of 95%–100% U50% was applied in a 3 m rod–plate gap and the streamer velocity was analyzed. Analysis of the observations shows that streamer velocity can be defined by three stages: rapid velocity decline(stage 1), rapid velocity rise(stage 2)and slow velocity decline(stage 3). The effects of electrode shape, applied voltage and gap breakdown or withstanding on streamer velocity were analyzed. The electrode with a larger radius of curvature will result in a higher initial velocity, and a higher voltage amplitude will cause the streamer to propagate faster at stage 3. Gap withstanding or breakdown has no obvious effect on streamer velocity. In addition, the experimental results are compared with previous results and the statistical characteristics of the primary streamer discharge are discussed.

Research on MBSE Application for Radio Navigation System

The rapid development of concepts and technologies for civil aircraft navigation systems has put forward higher requirements for agile iteration and integrated design verification in the research and development(R&D)process.Traditional document based system engineering(DBSE)methods have gradually become inadequate.Model based system engineering(MBSE)is fully based on user′s needs and is carried out from top to bottom,in line with the concept of forward design.It is gradually being applied in the development of civil aircraft systems.This article focuses on the civil aircraft radio navigation system and proposes a complete system engineering solution based on models,from system design and development to validation.Guided by the Arcadia methodology,with Capella modeling tool,Simulink simulation tool,and system validation tool,the complete R&D process from design and development to testing and validation was achieved through model construction,code generation,and testing validation.A radio navigation station selection optimization method based on machine learning was proposed,and results had good signal quality and persistence.The verification result of Beijing⁃Shanghai flight route shows MBSE method practiced in this article can ensure the feasibility of the entire process of radio navigation system development,as well as the rationality of tuning and positioning result.By automatically generating code to form a universal functional module,an optimization method that integrates different radio navigation station selection strategies is achieved,providing new ideas for the development and design of radio navigation systems.

A Historical Review of the Development of Women’s Higher Education in China (1908-2020): Stages, Explanations, and Trends

The development of women’s higher education in China can be divided into four stages:emergence(1908-1948);foundation(1949-1976);accelerating development(1977-2008);and the qualitative leap(2009-2020).This work considers the principal institutional mechanisms that contributed to this development.First,flexibly planned parenthood gradually promoted gender equality and openness in society facilitated by systematic“awards,grants,and loans”initiatives to support women’s higher education economically.Second,compulsory education ensured that left-out and migrant children had access to higher education.Third,effective connectivity across different education types bridged education gaps between those with different levels of education.Fourth,China made great efforts to invite and integrate international experiences that promoted the development of women’s higher education.Looking beyond these achievements,we also discuss the future trends of women’s higher education in China.

Trend and Development of Semi-Solid Metal Processing

This paper reviewed the trend and development of semi-solid metal technique. The processes and mechanisms for producing slurry of SSM and its industrial applications have been summarized and discussed. Discussions on the basic rheological theory are presented for more applications. Further consideration of the development and application of SSM technique is also proposed.

Use of the AHP Methodology in Vehicle Design Process Dynamics: Determination of the Most Effective Concept Phases for the New Automotive Product

The function of decision-making in the management of new product development and vehicle design activities is achieved by defining, constructing or evaluating the outcome-oriented, and most effective steps from the sub-steps that form this basic process. The choice of the sub-stages of the basic process or the decision of how to do a job gains importance in terms of the efficiency of the firm’s activities. Therefore, the decision making function is one of the basic elements involved in the formation and development of the basic processes that can comply with the market dynamics of firms. With the new product being developed, the selection, the current editing or the evaluation of the steps that make up the vehicle design activities for the automotive industry companies that exist and compete in the market, bring about significant gains. In the manufacturing industry, the design of the vehicle determines the market spread, while the competitive conditions are driven by the new or improved product decision. In both cases, the automotive industry firms must know the stages of the most appropriate vehicle design in their own right, and the steps of forming new project dynamics must be devised in this direction. In this study, the result oriented activity of the current vehicle design phases used in the automotive industry companies is determined and the order of importance of the stages is listed. For this purpose, under the same conditions of competition (the same market, the same class vehicles develops and manufactures), 4 in the automotive firm administration, a total of 40 employees (4 × 10 process manager) with the vehicle design was evaluated by determining the effectiveness of the use of the stage. At this stage, analytic hierarchy methods applied to each of the phases are explored in practice instead of the use of the significance level automotive company. Study of the vehicle design phase of the automotive industry: structure, process modifications or new project reveals the important values to be configured according to the size.

Research on Networked Rapid Product Development Process

Today the cycle time of the product develop is requ ir ed to be shortened. At the same time the requirement of the customers becomes mo re and more diverse and complex. The capability of the develop unit is limited b ecause of the existence of heterogeneous systems and distributed environments. I n this paper, we bring forward a new approach to solve the problem in product de velopment process. We also settle part key technologies in it. A great deal of information from all kinds of sources in the distributed develop ment process is interweaved. The solution to organize the workflow and manage th e information in the process is called for anxiously. We use a new approach that is asynchronous and synchronous coupling product development approach based on the network. The approach extends the develop process from the time axis. Then t he activities in the process are organized from the asynchronous and synchronous aspects. The state of every activity projects at the ASN (active semantic netwo rk). The ASN includes decision system, intelligent agent, user interface and net work. The ASN decides the types and states of the activities and deals with the couple relationship among them. The knowledge stored in ASN is open to all users through the relative interfaces. Every specialist keeps contact with their user s relying on collaborative platform implements CSCW (computer support collaborat ive work) that integrated product/process design and development. The lack of gl obal communication in product development process can be prevented in the most d egree. The key technologies that exist in the asynchronous and synchronous coupling pro duct develop approach include: integrated development structure, orderly organiz ation of information, transparent management of process, agile transfer of infor mation and rapid prototype. The development process can be completed quickly by these technologies. The technologies involve wide content. In this paper, we dis cuss some key technologies. We validate the approach by the projectrapid response manufacturing a pplication in the distributed environment. The expensive device, high technology and low using lead to RE (Rapid engineering) and RP (Rapid prototype) service a pplication by the network. RE and RP develop rapidly due to the accelerated prod uct development process. RE and RP application service platform is built in the project.

A CORBA-Based Integration Platform of Product Development Process Management for Concurrent Engineering

Product development process management plays an important role in concurrent engineering (CE). The integration platform is a useful tool for effectively supporting the software development and integration. Based on the analysis of practical requirements for product development process management for CE, a CORBA-based integration platform of product development process management (IP-PDPM) is designed and developed. The design principles for IP-PDPM are described. The system architecture and functions of the platform are given, the key technologies for the implementation of IP-PDPM are presented, the application integration mechanism and its implementation techniques are also detailed.

Classification and exploration potential of sedimentary basins based on the superposition and evolution process of prototype basins

Classification,superimposed evolution and sedimentary filling of prototype basins are analyzed based on the Wilson cycle principle of plate theory,by dissecting the evolution history of 483 sedimentary basins around the world since the Pre-cambrian,combined with the three stress environments of tension,compression and shear.It is found that plate tectonic evo-lution controls the superimposed development process and petroleum-bearing conditions of the prototype basins in three as-pects:first,more than 85%of the sedimentary basins in the world are developed from the superimposed development of two or more prototype basins;second,the superposition evolution process of the prototype basin takes Wilson cycle as the cycle and cycles in a fixed trajectory repeatedly.In each stage of a cycle,a specific type of prototype basin can be formed;third,each prototype basin can form a unique tectonic-sedimentary system,which determines its unique source,reservoir,cap conditions etc.For hydrocarbon accumulation,the later superimposed prototype basin can change the oil and gas accumulation conditions of the earlier prototype basin,and may form new petroleum systems.Based on this,by defining the type of a current basin as its prototype basin formed by the latest plate tectonic movement,14 types of prototype basins can be classified in the world,namely,intracontinental growth rift,intr acontinental aborted rift,intercontinental rift,passive continental margin,interior craton,trench,fore-arc rift,ba ck-arc rift,back-arc de pression,back-arc small ocean,peri pheral foreland,back-arc foreland,strike-slip pull-apart,and strike-slip flexural basins.The classification scheme can ensure the uniqueness of the types of in di-vidual sedimentary basin,and make it possible to predict their oil and gas potential scientifically through analogy.

The process development and product application of Tisco DSS

DSS have high strength,high corrosion resistance and good welding properties.Comparing with the same corrosion resistance level austenitic stainless steel,DSS decrease largely Ni content and realize the thinning of thickness design to perfectly optimize properties and decrease costs.Now DSS have been widely used in many fields such as petroleum,chemical industry,paper production,shipbuilding,nuclear power, seawater desalting,vacuum salt production and architecture.Tisco have began the process development and product application research of DSS products from last century and gradually solved a lot of technical problems such as AOD nitrogen alloying control of various content DSS,high temperature deformation mechanism of thermal process,large deformation hot rolling process of coils,the effect of bad phase precipitated during hot treatment process on properties and high efficiency pickling of high Cr/Mo content DSS plates.The various alloy content DSS plates and wide cold rolling coils(3Re60,S32101,S32304, S31803,S32205,S32750 and SUS329J4L) were successfully developed and used in national important constructions,key industries and abroad projects.

Suggestions on Process Technology Development of Iron and Steel Making in China

1 Introduction The 21st century is coming and the world iron and steel making technology is facing an important technical evolution at this century turnover,which is reflected in two aspects:①Rapid development of traditional iron&steel making technology with continuous regeneration;②Three major frontier techniques of metallurgy(smelting reduction;near-net-shape continuous

China's Processing Trade Development for Mechanical and Electrical Products

Since the launch of the economic reform and opening to the outside world, China has seen rapid growth in its export of mechanical and electrical products, with its export

Tsinghua University Tsinghua-TOYO Research and Development Center of Magnesium and Aluminum Alloys Processing Technology

Tsinghua-TOYO Research and Development Center of Magnesium and Aluminum Alloys Processing Technology was officially established between Tsinghua University and TOYO Machinery & Metal Co. on Feb. 26, 2002, which is a non-independent legal research organization located in Department of Mechanical Engineering of Tsinghua University. The center was equipped with one set of 650t automatic magnesium and aluminum alloys diecasting machine and necessary accessories including the melting furnaces for magnesium alloys and aluminum alloys, an accurate magnesium pump to transfer the magnesium alloys to the shot sleeve of the die casting machine, a die temperature controller, and data logging systems for cavity pressure and die temperature distributions, etc. The center is aimed to the research and development of magnesium and aluminum die casting process and their related technologies, and the main research contents include:

Research and Implementation of Task Management Model in Product Development Process Management

The implementation of product development process management (PDPM) is an effective means of developing products with higher quality in shorter lead time. It is argued in this paper that product, data, person and activity are basic factors in PDPM With detailed analysis of these basic factors and their relations in product developmed process, all product development activities are considered as tasks and the management of product development process is regarded as the management of task execution A task decomposition based product development model is proposed with methods of constructing task relation matrix from layer model and constraint model resulted from task decomposition. An algorithm for constructing directed task graph is given and is used in the management of tasks. Finally, the usage and limitation of the proposed PDPM model is given with further work proposed.

Research on Concurrent Engineering Oriented Integrated Product Development Process Management System

In concurrent engineering, effective process management is the key to improve the efficiency and quality of product development. Although in project management system, workflow management system and PDM system, process management functions are provided, they can not meet the needs of product development. In this paper, we integrate the project management, workflow management and product management technique together and a concurrent engineering oriented integrated product development process management system is proposed. The system structure, integrated product development model and running method are introduced. The practice proves this system is powerful in supporting product development process.

Development and application of magnesium alloy parts for automotive OEMs:A review

China is currently vigorously implementing the“energy conservation and emission reduction”and“dual carbon”strategies.As the most resource-advantaged light metal material in China,Magnesium(Mg)alloy is progressively expanding its application in automobile,rail transportation,aerospace,medical,and electronic products.Chongqing University,Shanghai Jiaotong University,and Australian National University have conducted extensive research on the preparation,properties,and processes of Mg alloys.In the past 20 years,the proportion of Mg alloy in the automotive industry has gradually expanded,whereas currently the design and development of Mg alloy parts for automobiles has rarely been reported.Thus,the application models and typical parts cases of Mg alloy are summarized mainly from the four systems of the whole vehicle(body system,chassis system,powertrain system,interior,and exterior system).Subsequently,two actual original equipment manufacturers(OEM)cases are used to introduce the development logic of reliable die-cast Mg alloy,including forward design,formability analysis,process design analysis,structural redesign,manufacturing,and testing,aiming to share the methods,processes,and focus of attention of automotive OEMs for developing Mg alloy parts to enhance the confidence and motivation of applying Mg alloy in automotive field.Eventually,the multiple challenges faced by Mg alloy materials are sorted out and how to face these challenges are discussed.National policies and regulations,environmental protection and energy saving,and consumer demand will continue to promote the application of Mg.

VvAGAMOUS Affect Development of Four Different Grape Species Ovary

Grape pistil has an important influence on fruit size and quality.However,there were few studies on grape ovary,and the development process of the ovary is still unclear.Therefore,in this paper,four different grape varieties with different lengths of small inflorescences,namely‘Musct Hambourg’grape(Vitis vinifera),‘Concord’grape(Vitis labrusca),‘ShanPuTao’grape(Vitis amurensis)and‘GongNiang2Hao’grape(Vitis amurensis×Vitis vinifera)were used as test materials.Four varieties ovary were significant differences by means of stereomicroscope,paraffin section.The expression of ovary determining gene VvAGAMOUS(VvAG)and its development related genes VvCRABS CLAW(VvCRC)and VvAGAMOUS-LIKE 11(VvAGL11)with similar functions during the development of different grape varieties were preliminarily explored using fluorescence quantitative test.The relationship between VvAG and VvCRC,VvAG and VvAGL11 were analyzed using Y1H assay.Our results showed that there were obvious abdominal sutures on the surface of expect for‘Musct Hambourg’grape,and existing poly carpels.The ovary development of‘ShanPuTao’and‘GongNiang2Hao’grape was completed when the inflorescence length was less than 1 cm,while the‘Concord’and‘Musct Hambourg’grape were fully developed when the length of inflorescence was 3–4 and 4–5 cm,respectively.VvAG and VvCRC began to express in large quantities after the formation of stamen primordia,while VvAGL11 during the forming of ovule primordia.Therefore,VvAG and VvCRC mainly regulated the development of stamens and carpels and also promote the development of ovules,while VvAGL11 major regulated the development of ovules.The promoters of VvCRC and VvAGL11 were bound by VvAG.This study provides an important theoretical basis for further research on the molecular mechanism of grape ovary development.

Configuring topologically optimum vapor recompressed dividing-wall distillation columns to maximize operating efficiency

For dividing-wall distillation columns(DWDCs) separating a heavy-component dominated and wide boiling-point ternary(HCDWBT) mixture, a significant amount of excessive heat exists inevitably in stripping the heavy-component from the intermediate-component and it can be employed to initiate the development of vapor recompression heat pump(VRHP) assisted DWDC(VRHP-DWDC). Despite dividing wall may locate in the top, middle, and bottom, the optimum VRHP-DWDC is found to involve uniformlytwo VRHP circles. While the first one serves to compress and transform the excessive heat resulted from the separation of the heavy-component from the intermediate-component, the second one to compress and transform the overhead vapor stream of the light-component pre-heated sequentially with the condensate from the first one and the bottom product stream of the heavy-component, both releasing the temperature-elevated latent heat to the pre-fractionator's or common stripping section. The processing of two HCDWBT mixtures of benzene/toluene/o-xylene and n-pentane/n-hexane/n-heptane are selected to assess the derived optimum topological configurations of the VRHP-DWDC and their optimality is confirmed through detailed comparisons with the DWDC and two VRHP-DWDCs involving only one VRHP circle. The proposed strategy helps to tap the full potential of the VRHP-DWDC with considerably alleviated complication in process development.