Silver(Ag) nanostructures demonstrate outstanding optical, electrical, magnetic, and catalytic properties and are utilized in photonic, energy, sensors, and biomedical devices.The target application and the performanc...Silver(Ag) nanostructures demonstrate outstanding optical, electrical, magnetic, and catalytic properties and are utilized in photonic, energy, sensors, and biomedical devices.The target application and the performance can be inherently tuned by control of configuration, shape, and size of Ag nanostructures. In this work, we demonstrate the systematical fabrication of various configurations of Ag nanostructures on sapphire(0001) by controlling the Ag deposition thickness at different annealing environments in a plasma ion coater. In particular, the evolution of Ag particles(between 2 and 20 nm),irregular nanoclusters(between 30 and 60 nm), and nanocluster networks(between 80 and 200 nm) are found be depended on the thickness of Ag thin film. The results were systematically analyzed and explained based on the solid-state dewetting,surface diffusion, Volmer–Weber growth model, coalescence,and surface energy minimization mechanism. The growth behavior of Ag nanostructures is remarkably differentiated at higher annealing temperature(750 ℃) due to the sublimation and temperature-dependent characteristic of dewetting process.In addition, Raman and reflectance spectra analyses reveal that optical properties of Ag nanostructures depend on their morphology.展开更多
Coarse-grained molecular dynamics simulations were carried out to investigate the dewetting behavior of a polymer thin film on partial wetting solid surface at the early stage of the dewetting process. Spontaneous dew...Coarse-grained molecular dynamics simulations were carried out to investigate the dewetting behavior of a polymer thin film on partial wetting solid surface at the early stage of the dewetting process. Spontaneous dewetting is initiated by removing a band of strip from both the ends of the liquid polymer film which has achieved equilibrium. The solid-liquid interaction and temperature were varied to show their influence on the dewetting dynamics during dewetting as well as the shape evolution of the liquid polymer film. As is consistent with the results obtained in previous researches, the liquid film recedes at a constant speed initially with different solid-liquid couplings and tempe- ratures. Furthermore, smaller coupling parameters or higher temperatures tend to accelerate the recession speed of the liquid film and shorten the constant-speed recession duration. Obvious rims were not always observed. Both coupling parameter and temperature can influence the emergence of the rims.展开更多
To study the influence of ethanol molecules on the melittin tetramer folding,we investigated the dewetting transition of the melittin tetramer immersed in pure water and 8%aqueous ethanol solution(mass fraction) by th...To study the influence of ethanol molecules on the melittin tetramer folding,we investigated the dewetting transition of the melittin tetramer immersed in pure water and 8%aqueous ethanol solution(mass fraction) by the molecular dynamics simulations.We found that the marked dewetting transitions occurred inside a nanoscale channel of the melittin tetramer both in pure water and in aqueous ethanol solution.Also,ethanol molecules promoted this dewetting transition.We attributed this promoting effect to ethanol molecules which prefer to locate at the liquidvapor interface and decrease the liquid-vapor surface energy.The results provide insight into the effect of ethanol on the water dewetting phenomena.展开更多
Molecular dynamics simulation is applied to study the instability and rupture process of ultra-thin water films on a solid substrate. Results show the small disturbance of the film will develop linearly due to the spi...Molecular dynamics simulation is applied to study the instability and rupture process of ultra-thin water films on a solid substrate. Results show the small disturbance of the film will develop linearly due to the spinodal instability, whereas the interaction between solid and liquid has less influences on the initial growth. Then the rupture occurs and the rim recedes with a dynamic contact angle. The radius of the rim. varies with time as the square root of t, which is consistent with the macroscopic theory available. Stronger interaction between solid and liquid will postpone rupture time decline the dynamic contact angle and raise the density of water near the interface between solid and liquid.展开更多
We investigate the influence of an external electric field on the dewetting behavior of nitrogen-water systems between two hydrophobic plates using molecular dynamics simulations. It is found that the critical distanc...We investigate the influence of an external electric field on the dewetting behavior of nitrogen-water systems between two hydrophobic plates using molecular dynamics simulations. It is found that the critical distance of dewetting increases obviously with the electric field strength, indicating that the effective range of hydrophobic attraction is extended. The mechanism behind this interesting phenomenon is related to the rearrangement of hydrogen bond networks between water molecules induced by the external electric field. Changes in the hydrogen bond networks and in the dipole orientation of the water molecules result in the redistribution of the neutral nitrogen molecules, especially in the region close to the hydrophobic plates. Our findings may be helpful for understanding the effects of the electric field on the long-range hydrophobic interactions.展开更多
To understand the influences of nanoparticles on dewetting in ultra-thin films, both linear stability the- ory and numerical simulations are performed in the present study, with the consideration of oscillatory struct...To understand the influences of nanoparticles on dewetting in ultra-thin films, both linear stability the- ory and numerical simulations are performed in the present study, with the consideration of oscillatory structural （OS） forces. Long scale approximation is utilized to simplify the hydrodynamic and diffusion equations to a nonlinear system for film thickness and nanoparticle concentration. Results show that the presence of nanoparticles generally suppresses the dewetting process. Two physical mechanisms responsi- ble for this phenomenon are addressed in the present study. When the oscillatory structural forces are relatively smaller, the essential feature of film evolution is similar to the case of particle-free flow. The reduction of the linear growth rate and the postponement of film rupturing can be attributed to the increment of the viscosity due to the presence of nanoparti- cles. On the other hand, when the intensity of the OS forces becomes stronger, the stepwise thinning of film can be ob- served which prevents the film from rupture. Numerical sim- ulations indicate that this phenomenon is caused by the ex- istence of a stable zone due to the oscillatory nature of the structural forces. Another interesting finding is that the non- uniformity of the distribution of nanoparticle concentration might destabilize a spinodally stable film, and trigger the oc- currence of film dewetting.展开更多
Photodetectors with long detection distances and fast response are important media in constructing a non-contact human-machine interface for the Masterly Internet of Things(MIT).All-inorganic perovskites have excellen...Photodetectors with long detection distances and fast response are important media in constructing a non-contact human-machine interface for the Masterly Internet of Things(MIT).All-inorganic perovskites have excellent optoelectronic performance with high moisture and oxygen resistance,making them one of the promising candidates for high-performance photodetectors,but a simple,low-cost and reliable fabrication technology is urgently needed.Here,a dual-function laser etching method is developed to complete both the lyophilic split-ring structure and electrode patterning.This novel split-ring structure can capture the perovskite precursor droplet efficiently and achieve the uniform and compact deposition of CsPbBr3 films.Furthermore,our devices based on laterally conducting split-ring structured photodetectors possess outstanding performance,including the maximum responsivity of 1.44×105 mA W^(−1),a response time of 150μs in 1.5 kHz and one-unit area<4×10-2 mm2.Based on these split-ring photodetector arrays,we realized three-dimensional gesture detection with up to 100 mm distance detection and up to 600 mm s^(−1) speed detection,for low-cost,integrative,and non-contact human-machine interfaces.Finally,we applied this MIT to wearable and flexible digital gesture recognition watch panel,safe and comfortable central controller integrated on the car screen,and remote control of the robot,demonstrating the broad potential applications.展开更多
The melts of a series of low molecular weight poly（ethylene oxide）（PEO） fractions on mica surfaces were studied by atomic force microscopy（AFM） and X-ray reflectivity（XRR） measurement.The PEO ultrathin films w...The melts of a series of low molecular weight poly（ethylene oxide）（PEO） fractions on mica surfaces were studied by atomic force microscopy（AFM） and X-ray reflectivity（XRR） measurement.The PEO ultrathin films were obtained via static dilute solution casting.Different from the melts of the PEO with both methoxyl（（—OCH3）） end groups that are dewetted on the mica surface,a pseudo-dewetting phenomenon of the PEO melts was observed when either one end group of the PEOs becomes hydroxyl（—OH） or both are hydroxyl groups.The wetting layer thicknesses of the pseudo-dewetted melts were measured to be 4.5～4.7 nm,independent on the molecular weight and the end groups of PEOs.However,the PEO melt droplets on the wetting layer varied from spherical caps with relatively high contact angle to irregular shapes with relatively low contact angle when increasing the molecular weight and the hydrophobicity of end groups of PEOs.展开更多
基金the National Research Foundation of Korea(no.2011-0030079 and 2016R1A1A1A05005009)the research grant of Kwangwoon University in 2016
文摘Silver(Ag) nanostructures demonstrate outstanding optical, electrical, magnetic, and catalytic properties and are utilized in photonic, energy, sensors, and biomedical devices.The target application and the performance can be inherently tuned by control of configuration, shape, and size of Ag nanostructures. In this work, we demonstrate the systematical fabrication of various configurations of Ag nanostructures on sapphire(0001) by controlling the Ag deposition thickness at different annealing environments in a plasma ion coater. In particular, the evolution of Ag particles(between 2 and 20 nm),irregular nanoclusters(between 30 and 60 nm), and nanocluster networks(between 80 and 200 nm) are found be depended on the thickness of Ag thin film. The results were systematically analyzed and explained based on the solid-state dewetting,surface diffusion, Volmer–Weber growth model, coalescence,and surface energy minimization mechanism. The growth behavior of Ag nanostructures is remarkably differentiated at higher annealing temperature(750 ℃) due to the sublimation and temperature-dependent characteristic of dewetting process.In addition, Raman and reflectance spectra analyses reveal that optical properties of Ag nanostructures depend on their morphology.
基金Supported by the National Natural Science Foundation of China(Nos.20774036 50930001+1 种基金 20933001)the Program for New Century Excellent Talents in University of China and Fok Ying Tung Education Foundation(No.114018)
文摘Coarse-grained molecular dynamics simulations were carried out to investigate the dewetting behavior of a polymer thin film on partial wetting solid surface at the early stage of the dewetting process. Spontaneous dewetting is initiated by removing a band of strip from both the ends of the liquid polymer film which has achieved equilibrium. The solid-liquid interaction and temperature were varied to show their influence on the dewetting dynamics during dewetting as well as the shape evolution of the liquid polymer film. As is consistent with the results obtained in previous researches, the liquid film recedes at a constant speed initially with different solid-liquid couplings and tempe- ratures. Furthermore, smaller coupling parameters or higher temperatures tend to accelerate the recession speed of the liquid film and shorten the constant-speed recession duration. Obvious rims were not always observed. Both coupling parameter and temperature can influence the emergence of the rims.
基金supported by the National Science Foundation of China(No.10975175,90923002,21073222)Chinese Academy of Sciences(No.KJCX2-EW-N03)
文摘To study the influence of ethanol molecules on the melittin tetramer folding,we investigated the dewetting transition of the melittin tetramer immersed in pure water and 8%aqueous ethanol solution(mass fraction) by the molecular dynamics simulations.We found that the marked dewetting transitions occurred inside a nanoscale channel of the melittin tetramer both in pure water and in aqueous ethanol solution.Also,ethanol molecules promoted this dewetting transition.We attributed this promoting effect to ethanol molecules which prefer to locate at the liquidvapor interface and decrease the liquid-vapor surface energy.The results provide insight into the effect of ethanol on the water dewetting phenomena.
基金the National Natural Science Foundation of China(Nos.10472062 and 10772107)Shanghai Leading Academic Discipline Project(No.Y0103)
文摘Molecular dynamics simulation is applied to study the instability and rupture process of ultra-thin water films on a solid substrate. Results show the small disturbance of the film will develop linearly due to the spinodal instability, whereas the interaction between solid and liquid has less influences on the initial growth. Then the rupture occurs and the rim recedes with a dynamic contact angle. The radius of the rim. varies with time as the square root of t, which is consistent with the macroscopic theory available. Stronger interaction between solid and liquid will postpone rupture time decline the dynamic contact angle and raise the density of water near the interface between solid and liquid.
基金Project supported by the National Natural Science Foundation of China (Grant No. 11875237)。
文摘We investigate the influence of an external electric field on the dewetting behavior of nitrogen-water systems between two hydrophobic plates using molecular dynamics simulations. It is found that the critical distance of dewetting increases obviously with the electric field strength, indicating that the effective range of hydrophobic attraction is extended. The mechanism behind this interesting phenomenon is related to the rearrangement of hydrogen bond networks between water molecules induced by the external electric field. Changes in the hydrogen bond networks and in the dipole orientation of the water molecules result in the redistribution of the neutral nitrogen molecules, especially in the region close to the hydrophobic plates. Our findings may be helpful for understanding the effects of the electric field on the long-range hydrophobic interactions.
基金supported by the National Natural Science Foundation of China (10872122)Doctoral Fund of Ministry of Education of China (20103108110004)+1 种基金Program for Changjiang Scholars and Innovative Research Team in University (IRT0844)Shanghai Program for Innovative Research Team in Universities
文摘To understand the influences of nanoparticles on dewetting in ultra-thin films, both linear stability the- ory and numerical simulations are performed in the present study, with the consideration of oscillatory structural （OS） forces. Long scale approximation is utilized to simplify the hydrodynamic and diffusion equations to a nonlinear system for film thickness and nanoparticle concentration. Results show that the presence of nanoparticles generally suppresses the dewetting process. Two physical mechanisms responsi- ble for this phenomenon are addressed in the present study. When the oscillatory structural forces are relatively smaller, the essential feature of film evolution is similar to the case of particle-free flow. The reduction of the linear growth rate and the postponement of film rupturing can be attributed to the increment of the viscosity due to the presence of nanoparti- cles. On the other hand, when the intensity of the OS forces becomes stronger, the stepwise thinning of film can be ob- served which prevents the film from rupture. Numerical sim- ulations indicate that this phenomenon is caused by the ex- istence of a stable zone due to the oscillatory nature of the structural forces. Another interesting finding is that the non- uniformity of the distribution of nanoparticle concentration might destabilize a spinodally stable film, and trigger the oc- currence of film dewetting.
基金support by the Key Research Project of Zhejiang Laboratory(N.O.2021PE0AC02)the National Natural Science Foundation of China(N.O.11674210)the Project of Hetao Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone(HZQB-KCZYB-2020083).
文摘Photodetectors with long detection distances and fast response are important media in constructing a non-contact human-machine interface for the Masterly Internet of Things(MIT).All-inorganic perovskites have excellent optoelectronic performance with high moisture and oxygen resistance,making them one of the promising candidates for high-performance photodetectors,but a simple,low-cost and reliable fabrication technology is urgently needed.Here,a dual-function laser etching method is developed to complete both the lyophilic split-ring structure and electrode patterning.This novel split-ring structure can capture the perovskite precursor droplet efficiently and achieve the uniform and compact deposition of CsPbBr3 films.Furthermore,our devices based on laterally conducting split-ring structured photodetectors possess outstanding performance,including the maximum responsivity of 1.44×105 mA W^(−1),a response time of 150μs in 1.5 kHz and one-unit area<4×10-2 mm2.Based on these split-ring photodetector arrays,we realized three-dimensional gesture detection with up to 100 mm distance detection and up to 600 mm s^(−1) speed detection,for low-cost,integrative,and non-contact human-machine interfaces.Finally,we applied this MIT to wearable and flexible digital gesture recognition watch panel,safe and comfortable central controller integrated on the car screen,and remote control of the robot,demonstrating the broad potential applications.
文摘The melts of a series of low molecular weight poly（ethylene oxide）（PEO） fractions on mica surfaces were studied by atomic force microscopy（AFM） and X-ray reflectivity（XRR） measurement.The PEO ultrathin films were obtained via static dilute solution casting.Different from the melts of the PEO with both methoxyl（（—OCH3）） end groups that are dewetted on the mica surface,a pseudo-dewetting phenomenon of the PEO melts was observed when either one end group of the PEOs becomes hydroxyl（—OH） or both are hydroxyl groups.The wetting layer thicknesses of the pseudo-dewetted melts were measured to be 4.5～4.7 nm,independent on the molecular weight and the end groups of PEOs.However,the PEO melt droplets on the wetting layer varied from spherical caps with relatively high contact angle to irregular shapes with relatively low contact angle when increasing the molecular weight and the hydrophobicity of end groups of PEOs.
