Regional Differences and Characteristics of Soil Organic Carbon Density Between Dry Land and Paddy Field in China

Study on the regional characteristics of soil organic carbon （SOC） density in farmland will not only contribute greatly to the technique of soil productivity enhancement, but also give evidences of technique selection and policy making for carbon sequestration in soils. Based on the second national soil survey of China, the situation of SOC density in the plow layer of farmland was analyzed under different land use patterns. Results showed that SOC density in the plow layer was about 3.15 kg m^-2 in average ranging from 0.81 to 12.68 kg m^-2. The highest density was found in the southeastern region with an average of 3.63 kg ma, while the lowest occurring in the northwestern region with an average of 3.00 kg m^-2. The variation coefficient of SOC density in the plow layer of farmland was 57%, which was 35% lower than that of non-farmland soils. Compared to SOC density in the dry land, SOC density in paddy soils was 13% higher with a lower variation coefficient between different regions. In addition, the relationships between the climatic factors （annual average temperature and precipitation） and SOC density were lower in farmland than those in non-farmland soils, as well as lower in paddy soils than those in dry land of farmland. These results suggest that anthropogenic disturbances have great impacts on SOC density in farmland soils, especially in paddy soils, indicating that Chinese rice cropping may contribute greatly to the SOC stability and sequestration in paddy field.

Comparison of Fungicidal Difference of Two Arylpyrazoles Based on the Crystal Structures, Density Functional Theory Calculation and Molecular Docking

Two arylpyrazoles I andⅡwere synthesized and characterized by NMR and single-crystal X-ray diffraction.Compound I displayed 71.4%fungicidal inhibition rate against Rhizoctonia solani at 0.1 ppm,better than the control pyraclostrobin,whereasⅡhad little activity.Their fungicidal difference was discussed from theoretic level based on the crystal structure,density functional theory(DFT)calculation and molecular docking.The B3 LYP/6-31G^**level was employed to explore the HOMO-LUMO energy gap and charge distribution.Molecular docking was performed on the probable target protein bc1-enzyme complex.DFT calculation and docking studies supported the in vitro findings.

Difference Sets of Null Density Subsets of N

Let , and for any , . If is positive, then B is considered as a large set with . Its difference set has both high density and rich structure. The set with is also relatively large and it is a long standing conjecture that like sets with positive upper density they have arithmetic progression of arbitrary length. Here we show their difference set may not be substantial;for any there exists such that and .

Formal Difference Analysis and Unification on p-Norm Distribution Density Functions

The cause of the formal difference of p-norm distribution density functions is analyzed, two problems in the deduction of p-norm formulating are improved, and it is proved that two different forms of p-norm distribution density functions are equivalent. This work is useful for popularization and application of the p-norm theory to surveying and mapping.

Analysis of Regional Differences in Bone Mineral Density Acquisition Factors in Young Women

Purpose: Obtaining high peak bone mass (PBM) and maintaining bone mass is important for the prevention of osteoporosis. This study aimed to examine the regional differences in bone mineral density and factors associated with its acquisition from exercise. Design: The study population included 75 women of 18 - 22 years of age in East Japan and 104 women of 18 - 27 years of age in West Japan. The speed of sound (SOS) of the calcaneus was measured, and the young adult mean (%YAM) was calculated from the SOS. The subjects’ medical history, family history of osteoporosis, and exercise habits were examined using a self-administered questionnaire. Results: There were a significantly greater number of subjects with low %YAM in West Japan. The exercise history and exercise time were significantly higher in West Japan, and the exercise intensity score tended to be higher in East Japan during junior high and high school. A multiple regression analysis by region revealed that the following factors had a significant positive association with the SOS: exercise intensity at elementary school and outdoor sports at junior high school in East Japan;and exercise time at elementary school, muscle mass, and outdoor sports at junior high school in West Japan. On the other hand, exercise time in junior high school in West Japan showed a negative association with the SOS. Conclusions: Regional differences in bone mineral density existed, suggesting a trend toward lower bone mineral density in West Japan. Exercise history and time tended to be higher in West Japan, and exercise intensity scores tended to be higher in East Japan, suggesting that exercise intensity may be more important than exercise time for obtaining bone mineral density.

A nuclear density probe:isobaric yield ratio difference

We report our recent progress on the nuclear symmetry energy probe,which is called the isobaric yield ratio difference(IBD),and its application in neutron density determination in experiments.The results obtained by the IBD,from which the isobaric yields in the measured 140 A MeV ^(40.48)Ca + ~9Be and ^(58.64)Ni + ~9Be reactions,and the calculated 80 A MeV ^(38-52)Ca +^(12)C reactions by using a modified statistical abrasion-ablation model,show the sensitivity of the IBD to the density differences between reactions.

Simulation of random mixed packing of different density particles

This paper presents the effects of density difference on the three-dimensional （3D） distribution of random mixed packing. The random mixed packing dynamics of particles of two different densities are simulated. The initial state is homogeneous, but the final packing state is inhomogeneous. The segregation phenomenon （inhomogeneous distribution） is also observed. In the final state, the top layers are composed of mostly light particles. The several layers beneath the top contain more heavy particles than light particles. At the bottom, they also contain more heavy particles than light particles. Furthermore, at both the top and the bottom, particle clustering is observed. The current study also analyses the cause of this inhomogeneity in detail. The main cause of this phenomenon is the velocity difference after collision of these two types of particles induced by the density difference. The present study reveals that even if particles were perfectly mixed, the packing process would lead to the final inhomogeneous mixture. It suggests that special treatment may be required to get the true homogeneous packing.

A mass-conserved multiphase lattice Boltzmann method based on high-order difference

The Z–S–C multiphase lattice Boltzmann model [Zheng, Shu, and Chew(ZSC), J. Comput. Phys. 218, 353(2006)]is favored due to its good stability, high efficiency, and large density ratio. However, in terms of mass conservation, this model is not satisfactory during the simulation computations. In this paper, a mass correction is introduced into the ZSC model to make up the mass leakage, while a high-order difference is used to calculate the gradient of the order parameter to improve the accuracy. To verify the improved model, several three-dimensional multiphase flow simulations are carried out,including a bubble in a stationary flow, the merging of two bubbles, and the bubble rising under buoyancy. The numerical simulations show that the results from the present model are in good agreement with those from previous experiments and simulations. The present model not only retains the good properties of the original ZSC model, but also achieves the mass conservation and higher accuracy.

Porosity Evaluation and the Power Spectral Densities Analyses of Carbon-Nickel Composite Films Annealed at Different Temperatures

The densification and the fractal dimensions of carbon-nickel films annealed at different temperatures 300, 500, 800, and 1000℃ with emphasis on porosity evaluation are investigated. For this purpose, the refractive index of films is determined from transmittance spectra. Three different regimes are identified, T 〈 500℃, 500℃ 〈 T 〈 800℃ and T 〉 800℃. The Rutherford baekscattering spectra show that with increasing the annealing temperature, the concentration of nickel atoms into films decreases. It is shown that the effect of annealing temperatures for increasing films densification at T 〈 500℃ and T 〉 800℃ is greater than the effect of nickel concentrations. It is observed that the effect of decreasing nickel atoms into films at 500℃ 〈 T 〈 800℃ strongly causes improving porosity and decreasing densification. The fractal dimensions of carbon-nickel films annealed from 300 to 500℃ are increased, while from 500 to 1000℃ these characteristics are decreased. It can be seen that at 800℃, films have maximum values of porosity and roughness.

Regional difference and dynamic evolution of development quality of power industry in China

To achieve the goals of carbon peaking and carbon neutrality and maintain high-quality economic growth,China is currently striving to improve the quality of development of its power sector.In this regard,revealing the regional differences and evolutionary trends in the development quality of China’power sector has a high value to inspire the next improvement direction toward how to integrate regional power recourses to an overall optimization level.Motived by this purpose,this paper uses the entropy method to evaluate the com‐prehensive and subsystem indices of the development quality of the power industry,and reveals their re‐gional differences and evolutionary trends with the help of the Dagum Gini coefficient and Kernel density es‐timation methods.The findings show that:There are obvious regional differences in the development quality of China’s power industry,and the differences are steadily declining in all regions except the West.Regional differences are mainly derived from inter-regional differences,with the largest inter-regional differences in the East-Northeast region.Intra-regional differences show a distribution pattern of East>West>North‐east>Center.

Effects on the Behavior and Neuroimmunity of Pulsed Microwaves with Different Peak Densities

Pulsed microwaves are widely used inradar,navigation, and communication. The average power density is low at narrow pulse widths or large pulse intervals,but pulsed microwaves at certain peak densities exert numerous biological effects, including

组织蛋白酶与骨密度的因果关系:双向孟德尔随机化分析

背景:既往研究表明,中老年人体内组织蛋白酶K水平可通过影响骨密度来干预骨质疏松的发生和发展,但组织蛋白酶家族与其他人群骨密度之间是否存在因果关系仍未知。目的:探讨组织蛋白酶与骨密度的因果关系。方法:从IEU Open GWAS数据库提取与8种组织蛋白酶相关的遗传位点作为工具变量,以5个年龄段人群的骨密度作为结局。通过双向孟德尔随机化分析,评估组织蛋白酶与骨密度的因果关系。使用Cochran’s Q检验评估遗传工具变量的异质性,使用MR-Egger截距检验评估多效性,使用留一法评估作为工具变量的单核苷酸多态性对暴露和结局因果关系影响的敏感性。结果与结论:①正向孟德尔随机化的逆方差加权法结果显示,组织蛋白酶H与>45岁且≤60岁人群的骨密度呈负相关[OR(95%CI)=0.965(0.94-0.99),P=0.04],组织蛋白酶Z与>30岁且≤45岁人群的骨密度呈负相关[OR(95%CI)=1.06(1.00-1.11),P=0.03];②敏感性分析结果显示因果关系稳定,MR-Egger截距分析未检测到潜在的水平多效性;③反向孟德尔随机化结果显示,骨密度对组织蛋白酶无显著反向作用;④上述结果证实,组织蛋白酶对部分年龄段人群骨密度会造成影响,可能会增加骨质疏松症的发病风险,应给予更多关注。

Studies on the Root Characteristics of Maize Varieties of Different Eras

Experiment was conducted at the Gongzhuling Experimental Station of Institute of Crop Sciences, Chinese Academy of Agricultural Sciences, Jilin Province, China, during 2009-2010. Six representative varieties of maize （Baihe in the 1950s, Jidan 101 in the 1960s, Zhongdan 2 in the 1970s, Yedan 13 in the 1980s, Zhengdan 958 in the 1990s, and Xianyu 335 in the 2000s） were each planted under two different densities （52 500 and 82 500 plants ha-~） and two different nitrogen application levels （150 and 300 kg ha-l）. Root characteristics and distribution among soil layers were studied by the field root digging method. The results showed that root mass increased with the process of the growth and development of the plant, and it peaked at kernel filling stage, and decreased at maturity due to the root senesces. Root mass of different maize varieties from the 1950s to 1980s had a trend of increase, while it decreased for the modern varieties. Root length and root surface areas had the similar changing trend. The study suggested that early maize varieties may have root redundancy, and reducing root redundancy may be a direction for variety improvement for high yield. Root characteristics were affected by nitrogen application level and density; modern varieties were more suitable for higher fertilizer application level and density conditions. Root characteristics distribution among soil layers decreased by an exponent equation, but the regression coefficients of different varieties were different. Though the root length density （RLD） of every soil layer of different varieties also decreased by an exponent equation, there were large variations of RLD in every part of a layer.

Three-D numerical simulation of wind-driven current and density current in the Beibu Gulf

The Casulli's difference scheme was introduced into the three-dimensional ocean model in the present paper, and the wind-driven current and thermohaline current were simulated. The results show that, southwesterly monsoon in summer induces a clockwise circulation in the Beibu Gulf, and the density gradient induces a counter-clockwise one; but the density current is more intense than the wind- driven one in summer, espeially in surface layer. In addition, the northeasterly monsoon in winter in- duces a counter-clockwise circulation. The simulated results don't support the traditional condusion that there is a clockwise circulation in the Beibu Gulf in summer and a counter-clockwise one in winter, but support the statement that a counterclockwise circulation exists in the Beibu Gulf all year round.

Density and temperature reconstruction of a flame-induced distorted flow field based on background-oriented schlieren(BOS) technique

An experimental system based on the background-oriented schlieren（BOS） technique is built to reconstruct the density and temperature distribution of a flame-induced distorted flow field which has a density gradient. The cross-correlation algorithm with sub-pixel accuracy is introduced and used to calculate the background-element displacement of a disturbed image and a fourth-order difference scheme is also developed to solve the Poisson equation. An experiment for a disturbed flow field caused by a burning candle is performed to validate the built BOS system and the results indicate that density and temperature distribution of the disturbed flow field can be reconstructed accurately. A notable conclusion is that in order to make the reconstructed results have a satisfactory accuracy, the inquiry step length should be less than the size of the interrogation window.

Increasing photosynthetic performance and post-silking N uptake by moderate decreasing leaf source of maize under high planting density

To date,little attention has been paid to the effects of leaf source reduction on photosynthetic matter production,root function and post-silking N uptake characteristics at different planting densities.In a 2-year field experiment,Xianyu 335,a widely released hybrid in China,was planted at 60 000 plants ha^(–1 )(conventional planting density,CD) and 90 000 plants ha^(–1) (high planting density,HD),respectively.Until all the filaments protruded from the ear,at which point the plants were subjected to the removal of 1/2 (T1),1/3 (T2) and 1/4 (T3) each leaf length per plant,no leaf removal served as the control(CK).We evaluated the leaf source reduction on canopy photosynthetic matter production and N accumulation of different planting densities.Under CD,decreasing leaf source markedly decreased photosynthetic rate (P_(n)),effective quantum yield of photosystem II (ΦPSII) and the maximal efficiency of photosystem II photochemistry (F_(v)/F_(m)) at grain filling stage,reduced post-silking dry matter accumulation,harvest index (HI),and the yield.Compared with the CK,the 2-year average yields of T1,T2 and T3 treatments decreased by 35.4,23.8 and 8.3%,respectively.Meanwhile,decreasing leaf source reduced the root bleeding sap intensity,the content of soluble sugar in the bleeding sap,post-silking N uptake,and N accumulation in grain.The grain N accumulation in T1,T2 and T3 decreased by 26.7,16.5 and 12.8% compared with CK,respectively.Under HD,compared to other treatments,excising T3 markedly improved the leaf P_(n),ΦPSII and F_(v)/F_(m) at late-grain filling stage,increased the post-silking dry matter accumulation,HI and the grain yield.The yield of T3 was 9.2,35.7 and 20.1% higher than that of CK,T1 and T2 on average,respectively.The T3 treatment also increased the root bleeding sap intensity,the content of soluble sugar in the bleeding sap and post-silking N uptake and N accumulation in grain.Compared with CK,T1 and T2 treatments,the grain N accumulation in T3 increased by 13.1,40.9 and 25.2% on average,respectively.In addition,under the same source reduction treatment,the maize yield of HD was significantly higher than that of CD.Therefore,planting density should be increased in maize production for higher grain yield.Under HD,moderate decreasing leaf source improved photosynthetic performance and increased the post-silking dry matter accumulation and HI,and thus the grain yield.In addition,the improvement of photosynthetic performance improved the root function and promoted postsilking N uptake,which led to the increase of N accumulation in grain.

Joint probability density function of the stochastic responses of nonlinear structures

The joint probability density fimction （PDF） of different structural responses is a very important topic in the stochastic response analysis of nonlinear structures. In this paper, the probability density evolution method, which is successfully developed to capture the instantaneous PDF of an arbitrary single response of interest, is extended to evaluate the joint PDF of any two responses. A two-dimensional partial differential equation in terms of the joint PDF is established. The strategy of selecting representative points via the number theoretical method and sieved by a hyper-ellipsoid is outlined. A two-dimensional difference scheme is developed. The free vibration of an SDOF system is examined to verify the proposed method, and a flame structure exhibiting hysteresis subjected to stochastic ground motion is investigated. It is pointed out that the correlation of different responses results from the fact that randomness of different responses comes from the same set of basic random parameters involved. In other words, the essence of the probabilistic correlation is a physical correlation.

Plasma Electron Density Measuring and Processing on the J-TEXT Tokamak

Plasma electron density is one of the most fundamental parameters in the study of tokamak plasma physics.The method of plasma electron density measuring and processing on the Joint Texas Experimental Tokamak(J-TEXT) was presented in this paper.The principle of the plasma electron density measuring by hydrogen cyanide(HCN) laser interferometer was introduced.Room temperature triglycine sulface(TGS) detector was used to obtain the beat signal of HCN,and phase difference was measured by high-speed acquisition card DAQ2010.Based on the signal characteristics,a specific HCN processing algorithm was designed to eliminate the baseline offset accurately and process overturns of HCN signals effectively.As a result,plasma electron density with high accuracy and low noise has been obtained during the J-TEXT tokamak experiment.

Study on Multi-density Contrast Agent Fillers of Duct Casting Based on CT Three-Dimensional Reconstruction

The three-dimensional visualization model of human body duct is based on virtual anatomical structure reconstruction with duct angiography,which realizes virtual model transferred from two-dimensional,planar and static images into three-dimensional,stereoscopic and dynamic ones repectively.In recent years,the multi-duct segmentation and division of the same specimen（or organ） is the focus of attention shared by surgeons and clinical anatomists.On the basis of 4.22 g/cm3 body bone density,this study has screened out metal oxide contract agent with different density for infusion and modeling,as well as compared and analyzed the effects of three-dimensional image of CT virtual bronchoscopy（CTVB）,three-dimensional image of CT maximum intensity projection and three-dimensional model.This experiment result showed synchronously infusing multi-duct of same specimen（or organ） with contrast agent in different densities could reconstruct three-dimensional models of all ducts once only and adjust threshold to develop single or multiple ducts.It was easier to segment and observe the duct structure,anastomosis,directions and crossing in different parts,which was beyond comparison with three-dimensional image of CTVB.Although the existing three-dimensional duct reconstruction techniques still cannot be applied in living bodies temporarily,this study focused on a creative design of ducts segmentation in different density,which proposed a new experimental idea for developing multi-duct three-dimensional model in living body in the future.It will play a significant role in disease diagnosis and individual design in surgical treatment program.Therefore,this study observes the three-dimensional status of human duct with the application of contrast agent fillers in different density,combined with three-dimensional reconstruction technology.It provides an innovative idea and method for constructing three-dimensional model of digital multi-duct specimen,and the ultimate goal is to develop the digitized virtual human and precise medical treatment better and faster.

Determining absolute value of thermal neutron flux density based on monocrystalline silicon in nuclear reactors

A new type of neutron detector based on monocrystalline Si is developed to measure the fluence and flux density of thermal and fast neutrons.The principle of this detector is based on the relationship between changes in electrical conductivity and neutron fluence during irradiation.Therefore,the absolute values of thermal neutron fluence and flux density are measured in a facile manner with high reliability.Compared with activation methods,our method not only possesses a similar accuracy,but also demonstrates superior application potential for the investigation of neutron fields in nuclear reactors owing to its suitable half-life.