Physicochemical properties and biological activities of polysaccharides from the peel of Dioscorea opposita Thunb.extracted by four different methods

Polysaccharides are the important biologically active components found in the peel of Dioscorea opposita Thunb.(DTTP).The influences of 4 extraction methods,namely hot water extraction(W),acidic extraction(HA),hot-compressed water extraction(HCW)and enzyme-assisted extraction(EAE),on the yields,physicochemical properties,hypoglycemic and antioxidant activities of polysaccharides from DTTP were studied and compared.Among these DTTP polysaccharides,DTTP-HA was outstanding in several respects.DTTP-HA was the most water soluble;it had the highest total carbohydrate content(85.08%),the highest uronic acid(13.20%)and the highest thermal stability.DTTP-HA and DTTP-W possessed a triple-helix structure.These 4 kinds of polysaccharides have the same types of monosaccharides,but in different molar percentages.Extraction method had a significant impact on the microstructures of the extracted polysaccharides.DTT-HA exhibited irregular structure with many holes.Among the 4 extracted methods,the DTTP-HA and DTTP-W initially exhibited higher hypoglycemic and antioxidant activities.The better bioactivities of DTTP-HA may be related to the above factors.The findings indicated that acid extraction is an effective method to extract polysaccharides with high biological activities from DTTP.

An Introduction to Numerical Methods for the Solutions of Partial Differential Equations

Partial differential equations arise in formulations of problems involving functions of several variables such as the propagation of sound or heat, electrostatics, electrodynamics, fluid flow, and elasticity, etc. The present paper deals with a general introduction and classification of partial differential equations and the numerical methods available in the literature for the solution of partial differential equations.

Plastic Deformation of Nano-TiO_2 Ceramics Prepared by Different Methods

The comparative study of the tensile plastic deformation of nano(n)-TiO2 ceramic prepared byphysical gas condensation (P) and chemical hydrolysis precipitation (C) methods was conductedby a gas pressure forming technique at 750~800℃. The results show that n-TiO2 (P) possessesexcellent property of tensile pIastic deformation comparing with n-TiO2(C). The reason for thisis attributed to the surface cleanness and soft agglomeration of n-TiO2 (P) particfe prepared inreIatively cIean vacuum condition.

Extraction of LUCC with different methods and threshold value

The research of land use and land cover (LUCC) is an important aspect in the global change research. The goal of this study is to find methods of extraction of LUCC’s change outlined and change type from remotely sensed data. Take the country of Fengxian in Shanghai as an example, it was supposed two steps to finish extraction of LUCC information: the first step was to use different methods, which is used to outline change areas; the second step include methods of false composing of two-temporal and threshold value. Through combining two methods, a model rule is built and the LUCC product is obtained, four kinds of change type within the study area are given, and the results are obvious. Finally, the results support the application of the high resolution image and tasseled cap composition (greenness and wetness) in the specific regional too.

Influence of different inoculation methods on the evaluation of the resistance to rice sheath blight(Rhizoctonia solani Kuhn)

To establish a standard system for geneticstudies on sheath blight resistance, a field testwas conducted at the experimental farm ofYangzhou University to compare several pro-cedures for inoculating rice plants with R.solani Kuhn (RH9). The varieties used wereJasmine 85, Teqing (resistant or moderatelyresistant), and Lemont (susceptible). They

A Computational Study with Finite Difference Methods for Second Order Quasilinear Hyperbolic Partial Differential Equations in Two Independent Variables

In this paper we consider the numerical method of characteristics for the numerical solution of initial value problems (IVPs) for quasilinear hyperbolic Partial Differential Equations, as well as the difference scheme Central Time Central Space (CTCS), Crank-Nicolson scheme, ω scheme and the method of characteristics for the numerical solution of initial and boundary value prob-lems for the one-dimension homogeneous wave equation. The initial deriva-tive condition is approximated by different second order difference quotients in order to examine which gives more accurate numerical results. The local truncation error, consistency and stability of the difference schemes CTCS, Crank-Nicolson and ω are also considered.

Effects of Different Drying Methods on Physiological Activities of Kiwifruit

[Objectives] This paper was to clarify the effects of different drying methods on the physiological activities of kiwifruit,so as to provide theoretical bases for the drying processing of kiwifruit.[Methods]With kiwifruit as the research object,the effects of hot air drying,microwave drying,and vacuum freeze drying on the active ingredients in dried kiwifruit were studied,and antioxidant activity of the ingredients were determined through the scavenging capacity of 1,1-phenyl-2-picrylhydrazyl free radicals( DPPH),hydroxyl radical scavenging capacity and the antioxidant capacity of ferrous ions.[Results] Vacuum freeze drying greatly reduced the physiological activities of kiwifruit,followed by microwave drying.Hot air drying was the best choice for dehydration of kiwifruit.Under the same conditions,the total flavonoid content of kiwifruit from hot air drying was 70.12 mg/ml,and the DPPH· free radicals scavenging ability of the treatment solution was the strongest,with the scavenging rate reaching 9.42%.The OH radicals scavenging rate was the highest at the concentration of 0.015 mg/ml,reaching69.92%.The absorbance reached the maximum at the concentration of 0.025 mg/ml,and the ferrous ion reduction capacity was also the greatest with the absorbance of 2.542.[Conclusions] Hot air drying could well maintain the shape and nutrients of kiwifruit,making it a proper drying method for kiwifruit processing.

Urrets-Zavalia syndrome in different methods of keratoplasty

INTRODUCTIONUrrets-Zavalia was first described as a syndrome consisting of a fixed,dilated pupil with iris atrophy following penetrating keratoplasty（PKP）in 1963 and back then it was thought that this syndrome was only related to keratoconus patients.Other findings that were not essential for the diagnosis were posterior synechiae,ectropion uvea,pigment dispersion,anterior subcapsular lens opacities and secondary glaucoma syndrome.

Prevention and Control Effects of New Biological Formulations Sprayed by Different Methods on Proceras venosatus (Walker) and Tryporyza intacta Snellen in Middle and Late Stages

To screen new biological formulations, accurate and efficient application technology, field test was conducted with 72% Bacillus thuringiensis(Bt)·monosultap WP, 8% lambda-cyhalothrin·emamectin benzoate SA and 3.6% lambda-cyhalothrin·Bt SA through manual spraying and unmanned aerial vehicle spraying. Test results and comprehensive evaluation analysis demonstrated that 72% Bt·monosultap WP and 8%lambda-cyhalothrin·emamectin benzoate SA by manual spraying and unmanned aerial vehicle spraying had good prevention and control effect on strains and internodes damaged by Tryporyza intacta Snellen in middle and late stage, which were ideal new biological formulations with high effi-ciency and low risk for prevention and control of T. intacta in middle and late stage, and could be popularized in sugarcane area. 72% Bt·monosultap WP at the dose of 3 000 g/hectare and 8% lambda-cyhalothrin·emamectin benzoate SA at the dose of 750 mL/hectare could be sprayed in mid September at the peak occurrence period of the forth and fifth generations of T. intacta and Proceras venosatus. Agents were diluted with 900 kg water per hectare, and manually sprayed with electric knapsack sprayer; or agents were diluted with 15 kg of Haoyang aerial control special addi-tives and water per hectare, and sprayed with unmanned aerial vehicle. The control effect against borer-damaged strain rate was above 81.3% and that against borer-damaged internode rate was above 88.6%.

Different Methods of Analysis for the Identification of Materials Dated to Different Periods in Egypt

Different questions may be raised during the course of analysis concerning in particular the characterization of materials used, their preparation and application techniques. The different methods used to identify the materials of mud brick, limestone, plaster, mortar and pigments, collected from different sites and periods from Egypt, in order to identify and characterize the materials, their structure, composition and their mineralogical compounds were： （Op） optical microscopy, which was used to examine and to identify the materials structures. Methods used in initial examination were： （1） （MCA）： Micro-chemical analysis, to identify the nature of the materials and for water-soluble salts, to identify sulphates, chlorides, carbonates, nitrites and nitrates; （2） （SM）： Standard methods of wet chemical analysis were used to identify the quantitative and qualitative nature of the, mud building, mortars and their mixtures; （3） （SEM ＆ EDS）： Analytical scanning electron microscope with energy dispersive X-ray analysis system was used to examine the micro-morphology and determine the chemical composition of the different materials; （4） （XRD ＆ XRPD）： X-ray diffraction to identify the mineralogical compound of the plaster, limestone, mortars and pigments used. From all the results obtained, it was possible to establish the nature of the mortars and their binders as well as some other inclusion. In addition to the identification of the stratigraphy of the layers applied in some samples, the examination and analysis gave details of the materials and the approximate ratio of the amount of additives used. Furthermore, the mineralogical analysis provided information on the main mineralogical phases present in the materials analyzed from the different periods.

CFD-Based Method of Determining Form Factor k for Different Ship Types and Different Drafts

The value of form factor k at different drafts is important in predicting full-scale total resistance and speed for different types of ships. In the ITTC community, most organizations predict form factor k using a low-speed model test. However, this method is problematic for ships with bulbous bows and transom. In this article, a Computational Fluid Dynamics(CFD)-based method is introduced to obtain k for different type of ships at different drafts, and a comparison is made between the CFD method and the model test. The results show that the CFD method produces reasonable k values. A grid generating method and turbulence model are briefly discussed in the context of obtaining a consistent k using CFD.

Synthesis of Hierarchically Porous FAU/γ-Al2O3 Composites with Different Morphologies via Directing Agent Induced Method

Zeolite FAU composites with a macro/meso-microporous hierarchical structure were hydrothermally synthesized using macro-mesoporous γ-Al_2O_3 monolith as the substrate by means of the liquid crystallization directing agent(LCDA) induced method. No template was needed throughout the synthesis processes. The structure and porosity of zeolite composites were analyzed by means of X-ray powder diffraction(XRD), scanning electron microscopy(SEM) and N_2adsorption-desorption isotherms. The results showed that the supported zeolite composites with varied zeolitic crystalline phases and different morphologies can be obtained by adjusting the crystallization parameters, such as the crystallization temperature, the composition and the alkalinity of the precursor solution. The presence of LCDA was defined as a determinant for synthesizing the zeolite composites. The mechanisms for formation of the hierarchically porous FAU zeolite composites in the LCDA induced synthesis process were discussed. The resulting monolithic zeolite with a trimodal-porous hierarchical structure shows potential applicability where facile diffusion is required.

Comparison of fish communities using environmental DNA metabarcoding and capture methods in a plateau Erhai Lake,China

Environmental DNA(eDNA)has been used as an important tool for fish diversity analysis,which can greatly solve the problems in traditional survey methodology.However,little work has been done on the actual monitoring accuracy of eDNA.In this study,we analyzed the current status of fish resources in Erhai Lake in Yunnan,SW China,by dividing the lake into three sectors according to habitat differences,and compared the results of eDNA and traditional capture methods to investigate the shortcomings of the current analysis of eDNA results.A total of 27 fish species were detected by eDNA and traditional capture methods,including 20 and 19 fish species,respectively,and additional differences in fish composition between the two methods.The alpha diversity showed higher fish abundance and lower fish diversity by eDNA method compared to the traditional capture method,demonstrating that eDNA was not superior for use in fish diversity analysis.Fish community similarity analysis showed that community differences were generally significant for eDNA(P<0.05).RDA analysis indicated that environmental factors did not significantly affect fish communities monitored by the eDNA method.However,water temperature,aquatic plants,and water depth had significant(P<0.05)effects on fish communities in the traditional capture method,suggesting that eDNA results are insensitive to the effects of environmental factors.Our results illustrate the effectiveness of eDNA in fish identification and the issues in quantification compared to traditional capture methods.Therefore,combining eDNA with traditional methods is a more effective method for analyzing eDNA metabarcoding,following which the protocols of both quantitative methods can be designed to explore the regularity of eDNA quantification.

A Computational Study with Finite Element Method and Finite Difference Method for 2D Elliptic Partial Differential Equations

In this paper, we consider two methods, the Second order Central Difference Method (SCDM) and the Finite Element Method (FEM) with P1 triangular elements, for solving two dimensional general linear Elliptic Partial Differential Equations (PDE) with mixed derivatives along with Dirichlet and Neumann boundary conditions. These two methods have almost the same accuracy from theoretical aspect with regular boundaries, but generally Finite Element Method produces better approximations when the boundaries are irregular. In order to investigate which method produces better results from numerical aspect, we apply these methods into specific examples with regular boundaries with constant step-size for both of them. The results which obtained confirm, in most of the cases, the theoretical results.

Analysis of Extended Fisher-Kolmogorov Equation in 2D Utilizing the Generalized Finite Difference Method with Supplementary Nodes

In this study,we propose an efficient numerical framework to attain the solution of the extended Fisher-Kolmogorov(EFK)problem.The temporal derivative in the EFK equation is approximated by utilizing the Crank-Nicolson scheme.Following temporal discretization,the generalized finite difference method(GFDM)with supplementary nodes is utilized to address the nonlinear boundary value problems at each time node.These supplementary nodes are distributed along the boundary to match the number of boundary nodes.By incorporating supplementary nodes,the resulting nonlinear algebraic equations can effectively satisfy the governing equation and boundary conditions of the EFK equation.To demonstrate the efficacy of our approach,we present three numerical examples showcasing its performance in solving this nonlinear problem.

Application of Mixed Differential Quadrature Method for Solving the Coupled Two-Dimensional Incompressible Navier-Stokes Equation and Heat Equation

The traditional differential quadrature method was improved by using theupwind difference scheme for the convective terms to solve the coupled two-dimensionalincompressible Navier-stokes equations and heat equation. The new method was compared with theconventional differential quadrature method in the aspects of convergence and accuracy. The resultsshow that the new method is more accurate, and has better convergence than the conventionaldifferential quadrature method for numerically computing the steady-state solution.

Finite Difference-Peridynamic Differential Operator for Solving Transient Heat Conduction Problems

Transient heat conduction problems widely exist in engineering.In previous work on the peridynamic differential operator(PDDO)method for solving such problems,both time and spatial derivatives were discretized using the PDDO method,resulting in increased complexity and programming difficulty.In this work,the forward difference formula,the backward difference formula,and the centered difference formula are used to discretize the time derivative,while the PDDO method is used to discretize the spatial derivative.Three new schemes for solving transient heat conduction equations have been developed,namely,the forward-in-time and PDDO in space(FT-PDDO)scheme,the backward-in-time and PDDO in space(BT-PDDO)scheme,and the central-in-time and PDDO in space(CT-PDDO)scheme.The stability and convergence of these schemes are analyzed using the Fourier method and Taylor’s theorem.Results show that the FT-PDDO scheme is conditionally stable,whereas the BT-PDDO and CT-PDDO schemes are unconditionally stable.The stability conditions for the FT-PDDO scheme are less stringent than those of the explicit finite element method and explicit finite difference method.The convergence rate in space for these three methods is two.These constructed schemes are applied to solve one-dimensional and two-dimensional transient heat conduction problems.The accuracy and validity of the schemes are verified by comparison with analytical solutions.

Stability and accuracy of central difference method for real-time dynamic substructure testing considering mass participation coefficient

For real-time dynamic substructure testing(RTDST),the influence of the inertia force of fluid specimens on the stability and accuracy of the integration algorithms has never been investigated.Therefore,this study proposes to investigate the stability and accuracy of the central difference method(CDM)for RTDST considering the specimen mass participation coefficient.First,the theory of the CDM for RTDST is presented.Next,the stability and accuracy of the CDM for RTDST considering the specimen mass participation coefficient are investigated.Finally,numerical simulations and experimental tests are conducted for verifying the effectiveness of the method.The study indicates that the stability of the algorithm is affected by the mass participation coefficient of the specimen,and the stability limit first increases and then decreases as the mass participation coefficient increases.In most cases,the mass participation coefficient will increase the stability limit of the algorithm,but in specific circumstances,the algorithm may lose its stability.The stability and accuracy of the CDM considering the mass participation coefficient are verified by numerical simulations and experimental tests on a three-story frame structure with a tuned liquid damper.

Buckling analysis of nanobeams with exponentially varying stiffness by differential quadrature method

We present the application of differential quadrature（DQ） method for the buckling analysis of nanobeams with exponentially varying stiffness based on four different beam theories of Euler-Bernoulli, Timoshenko, Reddy, and Levison.The formulation is based on the nonlocal elasticity theory of Eringen. New results are presented for the guided and simply supported guided boundary conditions. Numerical results are obtained to investigate the effects of the nonlocal parameter,length-to-height ratio, boundary condition, and nonuniform parameter on the critical buckling load parameter. It is observed that the critical buckling load decreases with increase in the nonlocal parameter while the critical buckling load parameter increases with increase in the length-to-height ratio.