Application Analysis of Digital Signal Processor DSP in Logging Instrument

In today’s world, the development ofeconomy has led to the continuous developmentand evolution of science and technology. Computertechnology and large-scale integration technologyhave been well developed and applied, followed by thetechnology of digital signal processing DSP productionand application. In the field of logging, the applicationfunction of this technology plays a key role. It not onlyallows the imaging logging technology to be furtherdeveloped, but also enables fast and accurate processingof downhole signals. Therefore, among many loggingtools today, digital signal processing DSPs have beenwidely used, and their functions have been fullyutilized. This paper analyzes the application of signalprocessor DSP in logging instruments. It is hoped thatit can play a reference role in the good application anddevelopment of logging instruments.

Controller Design for Induction and Brushless Motors Using Matlab with Digital Signal Processor (DSP)

The automation process is a very important pillar for Industry 4.0.One of the first steps is the control of motors to improve production efficiency and generate energy savings.In mass production industries,techniques such as digital signal processing(DSP)systems are implemented to control motors.These systems are efficient but very expensive for certain applications.From this arises the need for a controller capable of handling AC and DC motors that improves efficiency and maintains low energy consumption.This project presents the design of an adaptive control system for brushless AC induction and DC motors,which is functional to any type of plant in the industry.The design was possible by implementing Matlab software and tools such as digital signal processor(DSP)and Simulink.Through an extensive investigation of the state of the art,three models needed to represent the control system have been specified.The first model for the AC motor,the second for the DC motor and the third for the DSP control;this is done in this way so that the probability of failure is lower.Subsequently,these models have been programmed in Simulink,integrating the three main models into one.In this way,the design of a controller for use in AC induction motors,specifically squirrel cage and brushless DC motors,has been achieved.The final model represents a response time of 0.25 seconds,which is optimal for this type of application,where response times of 2e-3 to 3 seconds are expected.

Measuring Absolute Delay of RNSS Signal Channel Using Digital Envelope Detection

The absolute delay caused by equipment of radio navigation satellite service (RNSS) signal channel must be calibrated in the application of positioning. The measurement accuracy of absolute delay will affect the positioning precision of RNSS user. An absolute delay measurement technique using digital envelope detection was developed for RNSS signal transmission channel. The RNSS transmission signal of navigation satellite and the one pulse per second (1PPS)generated by satellite time keeping system were sampled synchronously. With sampling data of 1PPS,the reference point of the absolute delay can be decided at first,and then sampling data of RNSS transmission signal were truncated. The truncated data were processed using digital envelop detection algorithm to search the phase converting points of RNSS signal. Finally,the absolute delay of RNSS signal transmitting channel was calculated. Uncertainty of measurement with proposed technique is lower than 0. 2 ns as the sampling frequency is 10 GHz.

Kravchenko atomic transforms in digital signal processing

The modified atomic transformations are constructed and proved. On their basis the new complex analytic wavelets are obtained. The proof of the Fourier transforms existence in L~ and L2 on the basis of the theory of atomic functions （AF） are presented. The numerical experiments of digital time series processing and physical analysis of the results confirm the efficiency of the proposed transforms.

DATA BYPASSING ARCHITECTURE AND CIRCUIT DESIGN FOR 32-BIT DIGITAL SIGNAL PROCESSOR

This paper presents a design method of ByPassing Unit(BPU) in 32-bit Digital Signal Processor(DSP)-MD32. MD32 is realized in 0,18μm technology, 1.8V and 200 MHz working clock. It focuses on the Reduced Instruction Set Computer(RISC) architecture and DSP computation capability thoroughly, extends DSP with various addressing modes in a customized DSP pipeline stage architecture. The paper also discusses the architecture and circuit design of bypassing logic to fit MD32 architecture. The parallel execution of BPU with instruction decode in architecture level is applied to reduce time delay. The optimization of circuit that serial select with priority is analyzed in detail, and the result shows that about half of time delay is reduced after this optimization. Examples show that BPU is useful for improving the DSP's performance.The forwarding logic in MD32 realizes 8 data channels feedback and meets the working clock limit.

New WA-system of kravchenko functions in digital signal processing

On the basis of modified atomic transformations the new WA-systems of Kravchenko functions are constructed.As an example the digital processing of time series of the various physical nature processing is considered.The numerical experiments and physical analysis of the results confirm the efficiency of the proposed WA-systems of Kravchenko functions.

INTELLIGENT CONTROL SYSTEM OF PULSED MAG WELDING INVERTER BASED ON DIGITAL SIGNAL PROCESSOR

A fuzzy logic intelligent control system of pulsed MAG welding inverter based on digital signal processor （DSP） is proposed to obtain the consistency of arc length in pulsed MAG welding. The proposed control system combines the merits of intelligent control with DSP digital control. The fuzzy logic intelligent control system designed is a typical two-input-single-output structure, and regards the error and the change in error of peak arc voltage as two inputs and the background time as single output. The fuzzy logic intelligent control system is realized in a look-up table （LUT） method by using MATLAB based fuzzy logic toolbox, and the implement of LUT method based on DSP is also discussed. The pulsed MAG welding experimental results demonstrate that the developed fuzzy logic intelligent control system based on DSP has strong arc length controlling ability to accomplish the stable pulsed MAG welding process and controls pulsed MAG welding inverter digitally and intelligently.

Analyzing and Seeking Minimum Test Instruction Set of Digital Signal Processor for Motor Control

The relativity of instructions of motor control digital signal processor (MCDSP) in the design is analyzed. A method for obtaining a minimum instruction set in plac e of the complete instruction set during generation of testing procedures is giv en in terms of the processor presentation matrix between micro-operators and in structions of MCDSP.

Real-Time Discrete Adaptive Control of Robot Arm Based on Digital Signal Processing

A discrete model reference adaptive controller of robot arm is obtained by integrating the reduced dynamic model of robot, model reference adaptive control （MRAC） and digital signal processing （DSP） computer system into an electromechanical system. With the DSP computer system, the control signal of each joint of the robot arm can be processed in real time and independently. The simulation and experiment results show that with the control strategy, the robot achieved a good trajectory following precision, a good decoupling performance and a high real-time adaptivity.

面向飞腾迈创DSP的自主软件栈设计

飞腾迈创DSP是国防科技大学计算机学院为了突破卡脖子技术,解决我国相关重点领域内芯片长久受制于人的现实问题而自主设计的高性能数字信号处理器。由于该系列芯片采用全自主设计的指令集,无法兼容已有的软件,一套自主完备且高效的软件栈是决定飞腾迈创DSP生命力的关键。基于团队长期以来的持续工作,系统阐述了飞腾迈创DSP软件栈的设计原则与层次化架构,重点介绍了包括支持层、编译层以及工具层在内的相关软件工具的创新功能、实现方法以及性能。同时,结合用户的反馈与团队的思考,还讨论了飞腾迈创DSP软件栈未来需要探索的相关问题。

面向HKSEDSPC6713系列DSP的主动噪声控制系统设计

微处理器芯片的生态建设是高端装备与智能微系统自主、可控的关键,尽管国产数字信号处理(digital signal processing, DSP)器件及其相关开发应用技术近年来得到了一定的发展,但与需求仍存在较大差距。在主动噪声控制领域,前馈型多通道控制方案比单通道有较大的控制范围和较好的性能,但对系统的运算能力有较高的要求。文章以多通道FxLMS算法为基础,对多通道降噪系统的运算量进行了分析,依据国产DSP开发板的电路结构,设计了控制系统方案,并进行了实验研究。实验表明,所设计的噪声控制系统运算效率较ARM作为运算器提高了80%,对100~1 000 Hz内的周期性噪声信号衰减达到15~20 dB,证明了该方案的正确性。

Signal processing circuit of laser gyro based on FPGA and DSP

This is a paper about laser gyro sign a l processing circuit which is designed based on field-programmable gate array(FPGA) and digital signal processor(DSP).Through a pre-amplifier circuit,FPGA and DSP,a weak current signal is converted and transferred,then sent to the computer to display the final results.Through the laser gyro performance te sting,the obtained results coincide with those of the existing methods.Thus th e d esigned circuit realizes the function of laser gyro signal processing.

基于DSP算法的广播电视发射基站信号实时信道均衡系统设计

设计一种应用于广播电视发射基站的信号实时信道均衡系统,该系统基于数字信号处理(Digital Signal Processing,DSP)算法,旨在提高信号传输质量并降低误码率。系统由信号预处理、信道估计、自适应均衡3个关键模块组成。信号预处理模块采用自适应滤波技术去除噪声和干扰;信道估计模块利用频域分析技术精确估计信道参数;自适应均衡模块则通过最小均方误差(Least Mean Square,LMS)算法动态调整均衡器系数,以补偿信道失真。实验结果表明,该系统在城市、郊区、山区环境下均能显著提高信号质量,降低误码率,并提供足够的信道容量,满足广播电视信号的高质量实时传输需求。

DSP在线无缝升级方法研究

数字信号处理(DSP)在线升级需要多次断电重启,面对突发情况可能造成升级失败无法回退原版本的情况,为此对DSP在线升级方法进行了优化。通过加入外部看门狗实现整个升级过程无需断电重启。在FLASH分区中引入了AB区方式,实现DSP在线无缝升级并提高了在线升级的容错性。通过实验充分验证了上述优化方法,证明了该在线无缝升级方法的易操作性和容错性,可广泛应用于嵌入式系统在线升级过程。

基于DSP模式的计算机图像处理算法研究

基于DSP架构模式,提出了一种CNN卷积神经网络算法,并将其运用到计算机图像处理中。研究过程中,采用DSP技术进行计算机图像获取、算法处理、算例分析和结果优化,大大提高了计算机图像算法处理质量和效率。经过算法测试验证,结果表明,基于DSP数字信号处理器搭建多DSP并行处理架构模式,采用CNN卷积神经网络算法进行计算机图像处理,能够提高图像处理精度。该算法运行时的性能较高,功能低,CPU占用率不高,且DSP计算机处理系统在多DSP并行处理架构模式下进行算法分析,系统的稳健性和可靠性高,能够适应不同规模级别下的计算机图像处理数据集的处理速度、精度、资源消耗和功率要求,可为计算机图像算法处理提供准确、高效、经济的解决方案,对于计算机图像处理算法设计和优化以及应用具有较好的实用参考价值。

基于DSP与FPGA的变流器通用控制平台研究

提出一种基于DSP和现场可编程门阵列(FPGA)双CPU结构的新型变流器控制系统方案,其中DSP完成变流器控制策略的实现,主要包括:最大功率点跟踪、电压电流双闭环控制、低电压穿越控制、通信功能;FPGA完成三相锁相环控制、AD芯片采样控制、SVPWM波形控制、逻辑输出控制以及各类故障信号检测与停机保护功能,并采用了基于WIFI模块的风电故障信息传输系统。以双馈风电变流器为模型,设计了双馈风力发电变流器系统,完成了两电平与三电平SVPWM控制算法的FPGA实现。最后在自主研发的1.5 MW,2 MW双馈式变流器样机与光伏逆变器样机上进行了大量实验和长期的现场试运行,验证了控制系统平台的可行性与实用性。

基于DSP的数字图像处理实验的探究

近年来,随着电子科学与计算机科学的快速发展,基于DSP(digital signal processor)的数字图像处理的研究已经成为热点。该文利用以DM642为核心的DSP平台进行了一系列数字图像处理,并为以后的数字图像处理实验课程进行了探索。

基于DSP的管道焊接机器人微机控制系统的研究

对管道焊接机器人结构组成进行说明,从硬件电路设计及软件组成两方面对所研制的基于DSP的微机控制系统进行分析。试验结果表明,所研制的微机控制系统功能完善、工作稳定可靠,机器人跟踪精度高、焊缝质量好,可以用于实际焊接生产。

基于DSP的电动汽车电池管理系统的设计

在大量充放电模拟试验和随车试验数据采集的基础上,构建了基于数据信号处理器(DSP)芯片TMS320C2812的电池管理系统,实现了数据监测、荷电状态(SOC)估计、控制局域网(CAN)通信及USB存储等功能.在SOC估计算法上,根据电池所处状态进行了分类分析,并对估算难度最大的电池动态放电状态的算法进行了仿真实验.实验结果表明,该算法对镍氢电池的SOC能进行准确预测,并具有较高的精度.

基于DSP和FPGA的通用数字信号处理系统设计

随着电子设备结构和功能的日益复杂,对其内部使用的数字信号处理系统在体积和功耗方面提出了更高的要求。结合以上背景,设计了一种体积小、功耗低的通用数字信号处理系统。该系统利用DSP配合FPGA为硬件架构,以TMS320VC5509A DSP为数据处理核心,通过FPGA对USB、ADC和DAC等外围设备进行控制,并可实现频谱分析、数字滤波器等数字信号处理算法。硬件调试结果表明,该系统满足设计要求,可应用于实际工程和课堂教学等多个领域。