Design and simulation of digital channelized receivers in fractional Fourier domain

An approach is proposed to realize a digital channelized receiver in the fractional Fourier domain （FRFD） for signal intercept applications. The presented architecture can be considered as a generalization of that in the traditional Fourier domain. Since the linear frequency modulation （LFM） signal has a good energy concentration in the FRFD, by choosing an appropriate fractional Fourier transform （FRFT） order, the presented architecture can concentrate the broadband LFM signal into only one sub-channel and that will prevent it from crossing several sub-channels. Thus the performance of the signal detection and parameter estimation after the sub-channel output will be improved significantly. The computational complexity is reduced enormously due to the implementation of the polyphase filter bank decomposition, thus the proposed architecture can be realized as efficiently as in the Fourier domain. The related simulation results are presented to verify the validity of the theories and methods involved in this paper.

Capacity Maximization Based Power Loading Analysis for Digital Channelized Satcom Systems

For digital channelized frequency division multiple access based satellite communication(SATCOM) systems,it is a challenging but critical issue to improve the transponder power and spectrum efficiency simultaneously under limited and non-linear high-power amplifier conditions.In this paper,different from the traditional link supportability designs aiming at minimizing the total transponder output power,a maximal sum Shannon capacity optimization objective is firstly raised subject to link supportability constraints.Furthermore,an efficient multilevel optimization(MO) algorithm is proposed to solve the considered optimization problem in the case of single link for each terminal.Moreover,in the case of multiple links for one terminal,an improved MO algorithm involving Golden section and discrete gradient searching procedures is proposed to optimize power allocation over all links.Finally,several numerical results are provided to demonstrate the effectiveness of our proposals.Comparison results show that,by the MO algorithm,not only all links' supportability can be guaranteed but also a larger sum capacity can be achieved with lower complexity.

Design and Implementation of Partial Shared Digital Channelized Receiver

A novel efficient partial sharing channelization structure with odd and even stacking is designed and implemented. There are two special designs in the proposed structure. Firstly, by the intensive channel overlap design, for non-cooperative wideband signals, the proposed structure can achieve good parameter estimation accuracy and high probability of complete interception.Secondly, based on the partial sharing design developed in this paper, the computation burden of the proposed structure can be greatly reduced compared with the traditional directly implemented structures. Experiments and numerical simulations are conducted to evaluate the proposed structure, which shows its improvements over traditional methods in terms of field programmable gate arrays(FPGA) resource consumption and parameter estimation accuracy.

The digital anatomic study of the changing regularity of thoracic pedicle screw channels in different transverse screw angle

Objective To investigate the changing regularity of thoracic pedicle screw channel (PSC) in different transverse screw angle(TSA).Methods CT scan images of thoracic vertebrae of a healthy adult ware digitally analyzed by Mimics 10.01

Estimating Digital Inter-Symbol Interference Channel Blindly Based on the One-Step Branch Transition Rules in Trellises

A novel discrete-time digital inter-symbol interference (ISI) channel blind estimation sub-optimal algorithm is proposed. This algorithm reduces the complexity of the optimal maximum likelihood sequence estimation (MLSE) considerably based on the one-step branch transition rules in trellises, and is suitable for the estimation of the channels with small lengths of ISI.

PERFORMANCE ANALYSIS AND SIMULATION OF VARIOUS BURST TIME PLAN GENERATION METHODS IN BROADBAND SATELLITE MULTIMEDIA SYSTEM

The Burst Time Plan(BTP) generation is the key for resource allocation in Broadband Satellite Multimedia(BSM) system.The main purpose of this paper is to minimize the system response time to users' request caused by BTP generation as well as maintain the Quality of Service(QoS) and improve the channel utilization efficiency.Traditionally the BTP is generated periodically in order to simplify the implementation of the resource allocation algorithm.Based on the analysis we find that Periodical BTP Generation(P-BTPG) method cannot guarantee the delay performance,channel utilization efficiency and QoS simultaneously,especially when the capacity requests arrived randomly.The Optimized BTP Generation(O-BTPG) method is given based on the optimal scheduling period and scheduling latency without considering the signaling overhead.Finally,a novel Asynchronous BTP Generation(A-BTPG) method is proposed which is invoked according to users' requests.A BSM system application scenario is simulated.Simulation results show that A-BTPG is a trade-off between the performance and signaling overhead which can improve the system performance insensitive to the traffic pattern.This method can be used in the ATM onboard switching satellite system and further more can be expended to Digital Video Broadcasting-Return Channel Satellite(DVB-RCS) system or IP onboard routing BSM system in the future.

Time Modulated Array Antennas: A Review

Time-modulated array(TMA)antennas,introduce the dimension of time into antenna design to control the radiation patterns and frequency spectral characteristics,thus improve the reconfigurability of array antennas and provide multiple functional-ities.They have great application potential in military and civilian fields,such as precision guidance and mobile communication,and are currently a hot spot of academic research.This article provides a review on the fundamentals and applications of TMAs.First,the basic theory and mathematical formulations of TMAs are introduced.Second,the most important applications of TMAs,namely time-modulated phased arrays(TMPA),are discussed from the perspectives of harmonic suppression and harmonic utiliza-tion,which are used for single-beam and multibeam radiation.Then,we survey the combination of TMA with various types of novel antenna arrays,such as single-channel digital beamforming(DBF)arrays,frequency diverse arrays(FDAs),and retrodirective arrays,to create new hardware implementation methods and enhance their performance.Next,recent advances in dedicated integrated chips for TMA,which have played a significant role in driving the progress of TMAs from academic research to practical applications,are presented.Finally,the challenges and prospects for TMAs are discussed,including new research directions and emerging applica-tion scenarios.