Quantifying the Euphrates Electric Conductivity Depending on Parameters by Dimensional Analysis Method

The searching about methods to connect the variables with each other to reach equations including multi variables. The dimensional analysis is a method to facilitate the solution of difficult mathematic equations and experimental formulas;therefore methods of simplifying the difficult equations and obtaining a new equation with different variables is needed. In this study will use 2 methods (statically with dimensionally analysis) to obtain electric conductivity of water of Euphrates river by multi parameters that are time (t), temperature (Te), density, viscosity, discharge and water depth in upstream of Alhindya barrage which located in Babylon governorate, Iraq during winter 2019. The equations were obtained for EC with Te and t by data were collected from Alhindya barrage office with R2 = 0.999 and R2 = 0.995 by statically ways. Dimension analysis was utilized via 2 stages. In first stage was obtained on equation of EC with respect to Te, water density (ρ) and dynamic viscosity (μ) with constant time, depth of water and discharge and we obtain on R2 was 0.994 and R2 = 0.986. In second stage was obtained formula of EC with respect to Te, water density (ρ), dynamic viscosity (μ), with variable time, depth of water and discharge with we obtain on R2 = 0.945 and R2 = 0.94. The result of research indicates that applying the dimension analysis to connect more than one variable with each other to find best solutions and best methods to facilitate the solving the equations. From dimension analysis gave a clear visualization of the association of several variables to give a result that helps measure the electrical conductivity of water in the absence of a water test device.

Parametric Dimensional Analysis on the Structural Response of An Innovative Subsurface Tension Leg Platform in Ultra-Deep Water

The innovative Subsurface Tension Leg Platform(STLP), which is designed to be located below Mean Water Level(M.W.L) to minimize direct wave loading and mitigate the effect of strong surface currents, is considered as a competitive alternative system to support shallow-water rated well completion equipment and rigid risers for large ultra-deep water oil field development. A detailed description of the design philosophy of STLP has been published in the series of papers and patents. Nonetheless, design uncertainties arise as limited understanding of various parameters effects on the structural response of STLP, pertaining to the environmental loading, structural properties and hydrodynamic characteristics. This paper focuses on providing quantitative methodology on how each parameter affects the structural response of STLP, which will facilitate establishing the unique design criteria as regards to STLP. Firstly, the entire list of dimensionless groups of input and output parameters is proposed based on VaschyBuckingham theory. Then, numerical models are built and a series of numerical tests are carried out for validating the obtained dimensionless groups. On this basis, the calculation results of a great quantity of parametric studies on the structural response of STLP are presented and discussed in detail. Further, empirical formulae for predicting STLP response are derived through nonlinear regression analysis. Finally, conclusions and discussions are made. It has been demonstrated that the study provides a methodology for better control of key parameters and lays the foundation for optimal design of STLP. The obtained conclusions also have wide ranging applicability in reference to the engineering design and design analysis aspects of deepwater buoy supporting installations, such as Grouped SLOR or TLR system.

Dimensional analysis and extended hydrodynamic theory applied to long-rod penetration of ceramics

Principles of dimensional analysis are applied in a new interpretation of penetration of ceramic targets subjected to hypervelocity impact. The analysis results in a power series representation – in terms of inverse velocity – of normalized depth of penetration that reduces to the hydrodynamic solution at high impact velocities. Specifically considered are test data from four literature sources involving penetration of confined thick ceramic targets by tungsten long rod projectiles. The ceramics are AD-995 alumina, aluminum nitride, silicon carbide, and boron carbide.Test data can be accurately represented by the linear form of the power series, whereby the same value of a single fitting parameter applies remarkably well for all four ceramics. Comparison of the present model with others in the literature(e.g., Tate's theory) demonstrates a target resistance stress that depends on impact velocity, linearly in the limiting case. Comparison of the present analysis with recent research involving penetration of thin ceramic tiles at lower typical impact velocities confirms the importance of target properties related to fracture and shear strength at the Hugoniot Elastic Limit(HEL) only in the latter. In contrast, in the former(i.e., hypervelocity and thick target) experiments, the current analysis demonstrates dominant dependence of penetration depth only by target mass density. Such comparisons suggest transitions from microstructure-controlled to density-controlled penetration resistance with increasing impact velocity and ceramic target thickness.Production and hosting by Elsevier B.V. on behalf of China Ordnance Society.

Dimensional analysis of earthquake-induced pounding between adjacent inelastic MDOF buildings

In this study the seismic pounding response of adjacent multi-degree-of-freedom(MDOF) buildings with bilinear inter-story resistance characteristics is investigated through dimensional analysis. The application of dimensional analysis leads to a condensed presentation of the response, and the remarkable self-similarity property for bilinear MDOF buildings with inelastic collision is uncovered. It is shown that when the response is expressed in the appropriate dimensionless form, response spectra for any intensity of the excitation collapse to a single master curve. The reduced Π set explicitly describes the interaction between the colliding structures. The effect of pounding on the MDOF building’s response is illustrated using three well-divided spectral regions(amplifi ed, de-amplifi ed and unaffected regions). Parametric studies are conducted to investigate the effects of the story stiffness of structures, the story stiffness ratio and mass ratio of adjacent buildings, the structural inelastic characteristics and the gap size values. Results show that(i) the infl uence of system stiffness ratio to the lighter and more fl exible building is more signifi cant in the fi rst spectral region, where the maximum response of the building is amplifi ed because of pounding; and(ii) the velocity and pounding force of the heavier and stiffer building is unexpectedly sensitive to the mass ratio of adjacent buildings.

Numerical and Dimensional Analysis for Prediction of Line Heating Residual Deformations

Line heating process is a very complex phenomenon as a variety of factors affects the amount of residual deformations. Numerical thermal and mechanical analysis of line heating for prediction of residual deformation is time consuming. In the present work dimensional analysis has been presented to obtain a new relationship between input parameters and resulting residual deformations during line heating process. The temperature distribution and residual deformations for 6 mm, 8 mm, 10 mm and 12 mm thick steel plates were numerically estimated and compared with experimental and published results. Extensive data generated through a validated FE model were used to find co-relationship between the input parameters and the resulting residual deformation by multiple regression analysis. The results obtained from the deformation equations developed in this work compared well with those of the FE analysis with a drop in the computation time in the order of 100 (computational time required for FE analysis is around 7 200 second to 9 000 seconds and where the time required for getting the residual deformation by developed equations is only 60 to 90 seconds).

Material Equivalent Test Based on Dimensional Analysis for Fragment Penetrating Antenna Target

Phased array radar is the main sensor in a battlefield.Phased array antenna is the main execution unit of the phased array radar,and it greatly affects the reliability of the phased array radar. As a result,the fragment damaged antenna test is important.As the materials of phased array antenna are not easy to get,the fragment damaged antenna test is difficult to carry out. Then we present a study on this problem and introduce the principles of dimensional analysis to solve it. Firstly, the fragments damage antenna target dimensionless model is constructed. Secondly,the finite element analysis software ANSYS / LS-DYNA are used to carry out a large number of different materials simulation test for dimensional analysis. Finally,based on dimensional test analysis,the materials equivalent empirical model between different antennas target is presented in the same damage. The results of this study provide a feasible and valuable solution for different materials' target damaged test.

Discriminated Dimensional Analysis Versus Classical Dimensional Analysis and Applications to Heat Transfer and Fluid Dynamics

In contrast to classical dimensional analysis, discriminated dimensional analysis assumes that spatial coordinates are dimensionally independent of each other and allows other types of geometrical quantity to be used in the dimensional basis, such as surfaces and angles. As a consequence, discriminated dimensional analysis leads to a lower number of dimensional groups, which makes the solution more precise. Besides, these discriminated groups have a clear physical meaning in terms of force and energy balances. The paper introduces this technique and provides dimensional equations for the main quantities and physical parameters of the heat transfer and fluid flow fields. Two applications are presented to demonstrate the efficiency of this method.

Quantifying.Associations among Dimensions of Ears and Their Form Factors in Maize(Zea Mays)Using Dimensional Analysis

Ear morphological traits such as volume and shape are important features of maize and the quantitative associations among them can help understand kernel yield determination. 150 mature ears each of 4 maize cultivars were collected from field experiments, and ear length(L), diameter(D), area(S) and volume(V) were recorded for individual ears, kernel weight per ear also recorded for a portion of the examined ears. Following principles of dimensional analysis, 8 theoretical equations of 3 sets,which relate ear higher dimensions to its length and diameter, were developed and parameterized and validated with the field observations. The 3 optimized equations showed that the shape of ears in maize can be featured with 3 dimensionless form factors, namely diameter-to-length ratio(c=D/L), areal form factor(b=S/L/D), and volumetric form factor(a=V/L/D/D). Statistically,all of them were significantly different among cultivars, and a's values varied from 0.582 to 0.612, and b's 0.839-0.868, and c's 0.242-0.308. Volumetric form factor and areal form factor could estimate precisely ear volume and area respectively, but diameter-to-length ratio was not suitable to estimate ear diameter by its length. Ear volume explained almost all variation of ear kernel weight and product L*D*D did the same substantially. Dimensional analysis proved to be promising in understanding relationship among morphological traits of ears in maize. Its application in crop researches should improve our knowledge of the physical properties of crop plants.

Dimensional analysis of the impact toughness test for synthetic diamond grits

The method,in which a few carats of diamond grits are placed inside a capsule together with a steel ball,shaken for a number of times,and the unbroken ratio of the grits is then used to evaluate the quality of the diamond,has been well established for many years.However,the unbroken percentage,in an equivalent view,represents the impact toughness of the grits and cannot reflect the value of the crushing energy.Most of the previous empirical formulas obtained from experiments by scholars cannot be applied to practical tests.In this paper,a dimensional analysis was applied to investigate the impact toughness experiment,and the dimensionless relationship has been built among those variables such as the toughness index,the impact time,the impact frequency and the crushing energy per unit area.According to the results of a large number of experiments with synthetic diamond grits of mesh size 45/50,the percentage of the broken grits H is proportional to the impact time T^（1.14） when the impact frequency is 2400 r/min,and the impact frequency f^（2.576） when the number of impacts is 2000.

Airflow distribution law of multi-branch pipe of pneumatic rice direct seeder based on dimensional analysis

In order to investigate the flow characteristics and distribution law of airflow in multi-branch pipe of pneumatic rice precision direct seeder and obtain the mathematical model between airflow parameters and pipe geometry structure.In this study,the airflow flow law of the multi-branch pipeline of the pneumatic system was studied,the mechanism of airflow flow in the multi-branch pipe was analyzed,and it was clarified that the main factors affecting the airflow flow in the pipe,namely,air density,air dynamic viscosity,the total flow rate of the inlet branch pipe,the length of the closed end of the header,the inner diameter of the outlet branch pipe,and the outlet branch pipe spacing.Numerical simulations were carried out using Fluent simulation software to elucidate the cause of multi-branch pipes of uneven distribution of airflow in multi-branch pipes,the empirical equation among these factors and the flow velocity of the outlet branch pipe are established by dimensional analysis method.The bench test results show that the established empirical equations are applicable in the following ranges:0.018 m3/s≤Q≤0.054 m3/s,0.045 m≤d≤0.05 m,0.075 m≤L≤0.125 m,0.7 m≤Y 1≤0.875 m(0.5 m≤Y 2≤0.75 m,0.36 m≤Y 3≤0.45 m),the prediction accuracy can be controlled within 10%of the empirical formula,which can provide a reference for the prediction and optimization design of outlet velocity of the multi-branch pipe.

Three Dimensional Kinematics Analysis of the Independent Suspension Multibody System

Based on the theory of multibody system dynamics, the spatial kinematics analysis of the Mcpherson independent suspension widely used in the car was carried out. A practical and simpler method was provided to reduce the number of the generalized coordinates and constraint functions. By solving the nonlinear equations, the motion of any points in the whole suspension and wheel system can be predicted, including the spatial changes of the wheel alignment parameters which are of great importance to the car performances.

Dimensional Analysis on Resistance Characteristics of Labyrinth Seals

Experimental investigation of stepped and straight-through labyrinth seals was designed to study the sealing performance of two different typical labyrinth seals.In order to facilitate dimensional analysis on the flow resistance characteristics of labyrinth seals,the variable cross-section of the flow channels are considered as constant cross-section flow.The mechanical energy loss of flow caused by throttle turbulence intensity is considered as caused by friction along the way.The friction coefficient of stepped labyrinth seals is bigger than that of straight-through labyrinth seals by more than 40% for the same Reynolds number and the ratio of equivalent diameter and the seal length.The expression of friction coefficient /and /Re are obtained from experimental data.The verifications indicate that the expressions are highly accurate.The contribution to the total pressure drop of each tooth cavity gradually becomes less along the flow direction.

Process analysis for an alfalfa rotary dryer using an improved dimensional analysis method

All parameters in terms of wet alfalfa input capacity,dry alfalfa output capacity,alfalfa stem length,rotary speed,heated air temperature,air flow velocity and number of lifting flights fixed at the interior wall of rotary dryer were integrated and derived into fourπterms based on Jiang’s principle.The drying temperature was a significant factor influencing the drying rate and the post-drying quality of alfalfa hay.An improved G.Murphy theorem with high confidence was used to design an experimental program for alfalfa drying in a rotary dryer.Aπequation was derived by using the multiplication of component equations involving the drying parameters and most of its correlation coefficients were higher than 0.99.The validation results show that most of the relative errors ofπterms were lower than 10%and are acceptable in engineering practice.This empirical equation may be used to investigate the parameter interactive effects on conveyor performance,which may be useful in the design and selection of rotary dryers for drying alfalfa hay.

Magnetic field assisted fluidization—Dimensional analysis addressing the physical basis

This paper originates a discussion on dimensional analysis and scaling in magnetically assisted fluidized beds. Basic examination of process variables, merging mechanical and magnetic units, allows the conversion of mixed sets of variables into unified terms representing surface forces as effects of the fields contributing to the assisted fluidization behaviour. This transformation is termed ＂pressure transform＂ since the new variables are all characteristic pressures generated by three basic fields： gravity, magnetic and fluid flow. This approach addresses the physical basis in terms of dimensionless groups rather than formal algebraic manipulations pertinent to classical dimensional analysis. Basic dimensionless group termed granular magnetic Bond number is introduced as the ratio of characteristic pressures of gravity and of magnetic field. This analysis also provides a set of named dimensionless numbers characterizing magnetic field assisted fluidization such as Filippov number, Rosensweig number, Kwauk number and Siegell number, derived as ratios of characteristic pressures.

A dimensional analysis on asphalt binder fracture and fatigue cracking

Fracture and fatigue cracking in asphalt binder are two of most serious problems for pavement engineers. In this paper, we present a new comprehensive approach, which consists both of dimensional analysis using Buckingham H Theorem and J-integral analysis based on classic fracture mechanics, to evaluate the fracture and fatigue on asphalt binder. It is discovered that the dimensional analysis could provide a new perspective to analyze the asphalt fracture and fatigue cracking mechanism.

Blast wave characteristics of multi-layer composite charge:Theoretical analysis,numerical simulation,and experimental validation

This article investigates the characteristics of shock wave overpressure generated by multi-layer composite charge under different detonation modes.Combining dimensional analysis and the explosion mechanism of the charge,a peak overpressure prediction model for the composite charge under singlepoint detonation and simultaneous detonation was established.The effects of the charge structure and initiation method on the overpressure field characteristics were investigated in AUTODYN simulation.The accuracy of the prediction model and the reliability of the numerical simulation method were subsequently verified in a series of static explosion experiments.The results reveal that the mass of the inner charge was the key factor determining the peak overpressure of the composite charge under single-point detonation.The peak overpressure in the radial direction improved apparently with an increase in the aspect ratio of the charge.The overpressure curves in the axial direction exhibited a multi-peak phenomenon,and the secondary peak overpressure even exceeded the primary peak at distances of 30D and 40D(where D is the charge diameter).The difference in peak overpressure among azimuth angles of 0-90°gradually decreased with an increase in the propagation distance of the shock wave.The coupled effect of the detonation energy of the inner and outer charge under simultaneous detonation improved the overpressure in both radial and axial directions.The difference in peak overpressure obtained from model prediction and experimental measurements was less than 16.4%.

Three dimensional finite element analysis of anatomic distal radius Nitinol memory connector treating distal radius fracture

Objective: To study the memory biomechanical character of anatomic distal radius Nitinol memory connector (DRMC) in treating distal radius fracture. Methods: Establishing three dimensional model and finite element analysis, we calculated the stress in and around the fracture faces when distal radius fracture was fixated with DRMC. Results: Axial holding stress produced by holding part of DRMC on distal radius was 14.66 MPa. The maximum stress of holding part was 40-70 MPa, the minimum stress was 3-7 MPa,and the stress of compression part was 20-40 MPa. Conclusion: The distribution of stress produced by DRMC around the fracture line is reasonable, and axial holding stress can help stabilize fracture during earlier period. The existence of longitudal compression and memory effect can transfer fixated disused section into developed section and enhance fracture healing.

Three dimensional finite element analysis of acetabulum loaded by static stress and its biomechanical significance

Objective:To explore the mechanical behavior of acetabulum loaded by static stress and provide the mechanical basis for clinical analysis and judgement on acetabular mechanical distribution and effect of static stress.Methods:By means of computer simulation, acetabular three dimensional model was input into three dimensional finite element analysis software ANSYS7.0. The acetabular mechanical behavior was calculated and the main stress value, stress distribution and acetabular unit displacement in the direction of main stress were analyzed when anterior wall of acetabulum and acetabular crest were loaded by 1 000 N static stress. Results:When acetabular anterior wall loaded by X direction and Z direction composition force, the stress passed along 4 directions: (1)from acetabular anterior wall to pubic symphysis along superior branch of pubis firstly, (2)from acetabular anterior wall to cacroiliac joint along pelvic ring,(3)in the acetabulum,(4)from the suffered point to ischium. When acetabular crest loaded by X direction and Y direction composition force, the stress transmitted to 4 directions: (1)from acetabular crest to ilium firstly, (2)from suffered point to cacroiliac joint along pelvic ring,(3) in the acetabulum ,(4)along the pubic branch,but no stress transmitted to the ischium branch.Conclusion:Analyzing the stress distribution of acetabulum and units displacement when static stress loaded can provide internal fixation point for acetabular fracture treatment and help understand the stress distribution of acetabulum.

Data-driven prediction of dimensionless quantities for semi-infinite target penetration by integrating machine-learning and feature selection methods

This study employs a data-driven methodology that embeds the principle of dimensional invariance into an artificial neural network to automatically identify dominant dimensionless quantities in the penetration of rod projectiles into semi-infinite metal targets from experimental measurements.The derived mathematical expressions of dimensionless quantities are simplified by the examination of the exponent matrix and coupling relationships between feature variables.As a physics-based dimension reduction methodology,this way reduces high-dimensional parameter spaces to descriptions involving only a few physically interpretable dimensionless quantities in penetrating cases.Then the relative importance of various dimensionless feature variables on the penetration efficiencies for four impacting conditions is evaluated through feature selection engineering.The results indicate that the selected critical dimensionless feature variables by this synergistic method,without referring to the complex theoretical equations and aiding in the detailed knowledge of penetration mechanics,are in accordance with those reported in the reference.Lastly,the determined dimensionless quantities can be efficiently applied to conduct semi-empirical analysis for the specific penetrating case,and the reliability of regression functions is validated.