Controlling the light wavefront through a scattering medium based on direct digital frequency synthesis technology

Phase modulation is a crucial step when the frequency-based wavefront optimization technique is exploited to measure the optical transmission matrix(TM) of a scattering medium. We report a simple but powerful method, direct digital frequency synthesis(DDS) technology to modulate the phase front of the laser and measure the TM. By judiciously modulating the phase front of a He–Ne laser beam, we experimentally generate a high quality focus at any targeted location through a 2 mm thick 120 grit ground glass diffuser, which is commercially used in laser display and laser holographic display for improving brightness uniformity and reducing speckle. The signal to noise ratio(SNR) of the clear round focus is 50 and the size is about 44 μm. Our study will open up new avenues for enhancing light energy delivery to the optical engine in laser TV to lower the power consumption, phase compensation to reduce the speckle noise, and controlling the lasing threshold in random lasers.

Novel analysis method for the spurious spectrum of direct digitalfrequency synthesizer in the presence of phase truncation

Based on the analysis of the spurious introduced by phase accumulation truncation which was made by Nicholas, a new simplified algorithm for spurious spectrum in the presence of phase truncation is presented by using the mapping mathematics and number theoretic method, it is possible to precisely analyze the spurious location and the spurious amplitude introduced by phase truncation in practical applications by computer.

Design and Implementation of Smart Power Voltage and Frequency Synchroniser in Power Distribution System

Voltage and frequency are usually considered and assessed independently in the design and operation of electrical networks. However, these two are linked. Each and every malfunctioning electrical system has an impact on both voltage and frequency. This paper presents the opportunity for monitoring the distributed electrical energy by means of a system that monitors, controls, and provides a breakpoint based on high or low voltage and frequency tripping mechanism that avoids any damage to the load. The designed system comprised a switch mode power supply (SMPS), a direct digital synthesizer (DDS), and PIC16F876A microcontroller techniques for stable voltage and frequency outputs. Proteus design suite version 8.11 software and Benchcope SDS1102CN were used for modeling and simulation. The hardware prototype was implemented at a telecom cell site for data capturing and analysis. Test results showed that the implementation of the prototype provided stable and constant outputs of 222 V/50 Hz and 112 V/60 Hz which constituted 99% and 99.8% efficiency for voltage and frequency performance respectively. The paper also discusses different technologies that can be adopted by the system to mitigate voltage and frequency effects on customer appliances.

A 4 GHz 32 bit direct digital frequency synthesizer based on a novel architecture

This paper presents a novel direct digital frequency synthesizer （DDFS） architecture based on nonlinear DAC coarse quantization and the ROM-based piecewise approximation method, which has the advantages of high speed, low power and low hardware resources. By subdividing the sinusoid into a collection of phase segments, the same initial value of each segment is realized by a nonlinear DAC. The ROM is decomposed with a coarse ROM and fine ROM using the piecewise approximation method. Then, the coarse ROM stores the offsets between the initial value of the common segment and the initial value of each line in the same segment. Meanwhile, the fine ROM stores the differences between the line values and the initial value of each line. A ROM compression ratio of 32 can be achieved in the case of 11 bit phase and 9 bit amplitude. Based on the above method, a prototype chip was fabricated using 1.4 #m GaAs HBT technology. The measurement shows an average spurious-free dynamic range （SFDR） of 45 dBc, with the worst SFDR only 40.07 dBc at a 4.0 GHz clock. The chip area is 4.6 × 3.7 mm2 and it consumes 7 W from a --4.9 V power supply.

Design of an experimental platform to investigate the effects of audible sounds on plant growth

An experimental platform was developed to investigate the effects of audible sound(20 Hz to 20 MHz)on plant growth promotion,which included a microcontroller-based embedded system for audible sound adjustment and analysis.The direct digital frequency synthesis(DDFS)method was used to generate various waveforms of sound in the platform.Soundproof glass and mufflers were used to reduce background noise.The developed system was tested on various plants,including hydroponic tomatoes,celery and mung bean.The testing results showed that the developed platform could produce pure tone and mixing audible sound with high stability and accuracy,make octave analysis of the sound under experimental environments,and the background noise in the testing chamber of the platform was lower than 55 dB(A)when the compression engine was working.The developed experimental platform has a great potential on facilitating scientific research on acoustic biology effects on plants and collecting real-time experimental data.