Analysis of impact pressure,rock-breaking effect,and ground vibration induced by the disposable CO_(2)fracturing tube

The technology of expansion fracturing with liquid CO_(2)(EFLCO_(2))has attracted increasing attention due to reduced vibration and damage.The disposable fracturing tube has been developed and is gradually replacing the Cardox tube.However,there is a lack of impact pressure testing of disposable tubes under real working conditions,selection of gas explosion design parameters,and systematic analysis of blasting vibration.This limitation has constrained the widespread application of disposable fracturing tubes in engineering.A joint monitoring of the pressure-time curves in the disposable tubes and boreholes was conducted.The rock-breaking effect of varying hole spacing parameters in the EFLCO_(2)design was analyzed,and a systematic study was carried out on the vibration peak value,frequency,and energy characteristics.The results show that(1)the pressure distribution characteristics,stress peak value,and duration in the disposable tubes are different from those of Cardox tubes,which show multi-peak distribution,low-pressure peak value,and short duration.The correlation between the pressure in the disposable tube,filling pressure,and liquid CO_(2)weight is established,and a theoretical calculation method for the borehole wall pressure is proposed;(2)The hole spacing in rocks of different hardness is suggested;and(3)At the same scale distance,the peak particle velocity(PPV)caused by EFLCO_(2)(PPVCO_(2))is significantly smaller than that caused by blasting(PPVexplosive).The ratio of PPVexplosive to PPVCO_(2)is a power function related to scale distance,and a distance-related zonality exist in this relationship.The frequency composition of the vibration signal caused by EFLCO_(2)is relatively simple with a narrow frequency band.Its PPV and energy are mainly concentrated in the low-frequency band.This research contributes to the optimization of disposable fracturing tubes,gas explosion design,and vibration hazard control.

Development of an Integrated Disposable Device for SARSCoV-2 Nucleic Acid Extraction and Detection

Objective To develop a highly sensitive and rapid nucleic acid detection method for the severe acute respiratory syndrome coronavirus 2(SARS-CoV-2).Methods We designed,developed,and manufactured an integrated disposable device for SARS-CoV-2 nucleic acid extraction and detection.The precision of the liquid transfer and temperature control was tested.A comparison between our device and a commercial kit for SARS-Cov-2 nucleic acid extraction was performed using real-time fluorescence reverse transcription polymerase chain reaction(RT-PCR).The entire process,from SARS-CoV-2 nucleic acid extraction to amplification,was evaluated.Results The precision of the syringe transfer volume was 19.2±1.9μL(set value was 20),32.2±1.6(set value was 30),and 57.2±3.5(set value was 60).Temperature control in the amplification tube was measured at 60.0±0.0℃(set value was 60)and 95.1±0.2℃(set value was 95)respectively.SARS-Cov-2 nucleic acid extraction yield through the device was 7.10×10^(6) copies/mL,while a commercial kit yielded 2.98×10^(6) copies/mL.The mean time to complete the entire assay,from SARS-CoV-2 nucleic acid extraction to amplification detection,was 36 min and 45 s.The detection limit for SARS-CoV-2 nucleic acid was 250 copies/mL.Conclusion The integrated disposable devices may be used for SARS-CoV-2 Point-of-Care test(POCT).

Disposable circumcision suture device： clinical effect and patient satisfaction

In our experience patients undergoing circumcision are mostly concerned about pain and penile appearances. We conducted a prospective randomized trial to assess the benefits of a new disposable circumcision suture device （DCSD）. A total of 942 patients were equally divided into three groups （conventional circumcision, Shang ring and disposable suture device group）. Patients in the DCSD group were anesthetized with compound 5% lidocaine cream, the others with a 2% lidocaine penile block. Operation time, intra-operative blood loss, incision healing time, intra-operative and post-operative pain, the penile appearance and overall satisfaction degree were measured. Operation time and intra-operative blood loss were significantly lower in the Shang ring and suture device groups compared to the conventional group （P 〈 0.001）. Intra-operative pain was less in the suture device group compared With the other two groups （P 〈 0.001）; whereas post-operative pain was higher in the conventional group compared to the other two groups （P 〈 0.001）. Patients in the suture device （80.57%） and Shang ring （73,57%） groups were more satisfied with penile appearances compared with the conventional circumcision group （20.06%, P 〈 0.05）. Patients in suture device group also healed markedly faster than the conventional group （P 〈 0.01）. The overall satisfaction rate was better in the suture device group （78.66%） compared with the conventional （47.13%） and Shang ring （50.00%） groups （P 〈 0.05）. The combination of DCSD and lidocaine cream resulted in shorter operation and incision healing times, reduced intra-operative and post-operative pain and improved patient satisfaction with the cosmetic appearances.

Use of disposable graduated biopsy forceps improves accuracy of polyp size measurements during endoscopy

AIM: To determine the accuracy of endoscopic polyp size measurements using disposable graduated biopsy forceps(DGBF). METHODS: Gradations accurate to 1 mm were assessed with the wire of disposable graduated biopsy forceps. When a polyp was noted, endoscopists determined the width of the polyp; then, the graduated biopsy forceps was inserted and the largest diameter of the tumor was measured. After excision, during surgery or endoscopy, the polyp was measured using the vernier caliper.RESULTS: One hundred and thirty-three colorectal polyps from 119 patients were studied. The mean diameter, by post-polypectomy measurement, was 0.92 ± 0.69 cm; 83 were < 1 cm, 36 were between 1 and 2 cm, and 14 were > 2 cm. The mean diameter, by visual estimation, was 1.15 ± 0.88 cm; compared to the actual size measured using vernier calipers, the difference was statistically significant. The mean diameter measured using the DGBF was 0.93 ± 0.68 cm; compared to the actual size measured using vernier calipers, this difference was not statistically significant. The ratio between the mean size estimated by visual estimation and the actual size was significantly different from that between the mean size estimated using the DGBF and the actual size(1.26 ± 0.30 vs 1.02 ± 0.11).CONCLUSION: The accuracy of polyp size estimation was low by visual assessment; however, it improved when the DGBF was used.

Detection of phthalates migration from disposable tablewares to drinking water using hexafluoroisopropanol-induced catanionic surfactant coacervate extraction

Hexafluoroisopropanol(HFIP)-induced sodium dodecyl sulfate/dodecyltrimethylammonium bromide(SDS/DTAB) catanionic surfactant coacervate extraction method coupled with high performance liquid chromatography(HPLC) was used to detect the migration of phthalates from disposable tablewares to drinking water. The concentration factors are larger than 82 and extraction recoveries over 53% for water samples spiked with 100 or 200 ng/m L phthalates. Limit of detection is in the range of 1.0–2.6 ng/m L.Good linearity with correlation coefficients larger than 0.9985 is obtained in the concentration of20–1500 or 40–3000 ng/m L. Relative recoveries are from 82.4% to 123.6% for water samples spiked with30/60, 250/500, and 1500/3000 ng/m L phthalates, respectively. Relative standard deviations(RSDs) are0.4%–7.4% for intraday precision(n = 5) and 0.6%–7.8% for interday precision(n = 3). Four of studied phthalates are found in the drinking water samples prepared from four kinds of tablewares.

Conductive Polymer Composites Fabricated by Disposable Face Masks and Multi-Walled Carbon Nanotubes: Crystalline Structure and Enhancement Effect

Influenced by recent COVID-19,wearing face masks to block the spread of the epidemic has become the simplest and most effective way.However,after the people wear masks,thousands of tons of medical waste by used dis-posable masks will be generated every day in the world,causing great pressure on the environment.Herein,con-ductive polymer composites are fabricated by simple melt blending of mask fragments(mask polypropylene,short for mPP)and multi-walled carbon nanotubes(MWNTs).MWNTs were used as modifiers for composites because of their high strength and high conductivity.The crystalline structure,mechanical,electrical and thermal enhancement effect of the composites were investigated.MWNTs with high thermal stability acted the role of promoting the crystallisation of mPP by expediting the crystalline nucleation,leading to the improvement of amount for crystalline nucleus.MWNTs fibers interpenetrate with each other in mPP matrix to form conducting network.With 2.0 wt% MWNTs loading,the tensile strength and electrical conductivity of the composites were increased by 809% and 7 orders of magnitude.MWNTs fibers interpenetrate with each other in mPP matrix to form conducting network.Thus,more conducting paths were constructed to transport carriers.The findings may open a way for high value utilization of the disposable masks.

Disposable Condenser Dosimeter Using a Skin-Insulated Mini-Substrate with a Silicon X-Ray Diode in Image-Guided Radiation Therapy

To measure integral doses in image-guided radiation therapy, we developed a disposable mini-substrate with a 1.0-μF condenser and a silicon X-ray diode (Si-XD). The Si-XD is a high-sensitivity photodiode selected for detecting X-rays. In the substrate with dimensions of 15 × 15 mm2, the initial charging voltage is 3.30 V, and the charging voltage is decreased by photocurrents flowing through the Si-XD during X-ray exposing. The condenser in the substrate is charged by a microcomputer dock, and the charging voltage is also measured using an analog to digital converter in the dock after exposing X-rays. The dock is connected to a personal computer through a USB cable, and integral doses are shown on the PC monitor. The doses were proportional to decreases in the charging voltage, and the calibrated doses corresponded well to those obtained using a readily available ionization chamber.

The Validity of the Reduction of Disposable Plastic Checkout Bags in Japan

This study examined the effect of reducing disposable plastic checkout bags used in supermarkets, convenience stores, and so on in Japan. Considering that even when these checkout bags are abolished, alternative waste bags should be newly produced, because these checkout bags have been reused as household waste bags so far, and the corresponding amount of oil is still necessary to produce them, the amount of oil saved by this bag reduction was found to be 0.2 L/person/year at most. Further, it was demonstrated that the necessity to purchase substitute bags may increase the household and financial burden on consumers.

Life Can’t Be Any Easier than This—Introduction of the Portable and Disposable V.A.C. Machines

The application of controlled levels of negative pressure on to a wound has been shown to accelerate evacuation of dead cells, debris and fluid which eventually encourages wound healing in a verity of surgical wounds. Vacuum Assisted Closure (V.A.C.) therapy—KCI Medical Limited, the terminology by which this is widely known, became popular, especially among the plastic surgery professionals in America and soon gained recognition worldwide. It is now widely used in the UK to manage and assist healing in a wide variety of wounds. Although KCI’s V.A.C. machines were the only ones on the market for a number of years, several wound management companies have now brought out their own machines and these are now known collectively as topical negative pressure therapy (TNPT). Traditional TNPT is often considered a relatively costly procedure. It is often used in patients with large wounds to facilitate dressing management and promote rapid cleaning and granulation. This may also allow them to be discharged to the community when they would otherwise remain inpatients, thereby saving bed days. Capital purchase of the machines is expensive and hospitals often rent or lease them on a short or long term basis. This can lead to difficulties in arranging the finances for discharge to the community. Subsequent dressing changes (recommended every 48 - 72 hrs) also incur high costs and involvement of the trained medical or nursing staff. As we all know;“Need is the mother of invention”. The disposable TNPT machine (V.A.C. ViaTM KCI Medical Ltd) has been introduced to help to solve these problems. It is a single use machine, inclusive of a dressing and canister and available off the shelf. It is very cost effective, easy to use and is used for small to moderate sized wounds. Senior author is using this machine which excellent results and illustrated the use of this machine with pictures in this paper.

Cost analysis and comparison of plain cotton and disposable non-woven treatment towels

Objective: To choose a reasonably priced and low-cost treatment towel suitable for clinical application of hospital so as to reduce the cost of the hospital and make a reasonable use of resources through the cost analysis and comparison of the plain cotton and disposable non-woven treatment towels. Methods: The cost of the single pack plain cotton towel and disposable non-woven towel were analyzed and at the same time, 49185 packs of plain cotton towels which were the total consumption quantity of our hospital in 2017 and the same quantity of disposable non-woven towers were analyzed in the cost for comparison. Results:A single pack of disposable non-woven towel was RMB 2.50 cheaper than the plain cotton towel and the use of disposable non-woven towel can save the cost of RMB 2.50 per pack. In 2017, 49185 packs of plain cotton towel were used in total, which cost RMB 122962.50 less than the same quantity of disposable non-woven towels and using the disposable non-woven towel could save RMB 122962.50 annually. Conclusion: Compared with the plain cotton towel, the non-woven shares the advantages of none flocculation, longer storage time and better antibacterial effect as well as the material, cleaning and labor costs-saving. The cost of the disposable non-woven treatment towel is lower than that of the reusable plain cotton towel. Therefore, it is recommended to use the disposable non-woven treatment towel.

Hotel to Phase out Disposable Articles

Several hotels in Changsha, Shanghai and Kunming have recently staged a Green Hotel campaign: hotels will not offer disposable toothbrushes, toothpaste, slippers, combs or bottled shampoo and body lotion to their guests unless requested. Meanwhile a Green Hotel Standard has been issued, proscribing "disposable articles, such as toothbrushes, soap, combs and slippers," and stipulating that "textiles, such as bathrobes, towels and pillowslips, in hotel rooms are to be changed strictly at the request of guests,

Rites de Passage and Disposable of the Corpse:A Study on Death Rites Among the Deoris in a Rural Context of Assam,India

Death is one of the important crises rites in human society which invariably occur during the lifecycle of an individual. Death means the termination of the life of an individual along with its biological functions. It is one of the indispensable aspects of many traditions and organizations and is an important feature of every culture and civilization in the world. In common parlance death refers to the moment at which life ends and one of the difficult tasks of defining death is to distinguish it from the life of an individual. When a death occurs to an individual, it requires drawing precise conceptual boundaries between life and death. The life of an individual is defined on the basis of consciousness and when consciousness ceases, a person is said to have died. Death has an integral relationship with religion, especially with rites and rituals through which the departed soul is appeased with the intervention of the supernatural. In every society, there are certain customs related to death as well as the disposal of the corpse which reflect the parochial belief system associated with the event. In this paper, an attempt has been made to examine the pattern of disposal of death, integral religious rites, and rituals among the Tengapania Deoris of Assam.

Analysis and Prognostication of Residents'Per Capita Disposable Income in Hubei Province using Time Series Prediction Methods

To anticipate the fluctuations in per capita disposable income among Hubei Province inhabitants for the subsequent biennium,a dataset spanning from 2005 to 2022 was culled.Employed in this study were three distinct time series prognostication methodologies:Exponential Smoothing(Holt-Winter),Autoregressive Moving Average(ARMA),and Autoregressive Integrated Moving Average(ARIMA).These techniques were applied to envision the forthcoming trajectory of per capita disposable income for the province's residents.By computing diverse metrics to assess predictive discrepancies—like the Mean Absolute Error(MAE)and Root Mean Square Error(RMSE)—the effectiveness of the assorted models was gauged,culminating in the selection of the ARIMA model due to its superior performance.Capitalizing on this,approximations for per capita disposable income during 2023 and 2024 were extrapolated.The resultant prognoses project a sustained and noteworthy uptick in per capita disposable income for urban denizens of Hubei Province in the forthcoming biennial span.Ultimately,the findings were translated into actionable policy suggestions and deductions,rendering them highly pertinent for the dissection of Hubei Province's economic evolution.

Climate change and human health: Last call to arms for us

Climate change,now the foremost global health hazard,poses multifaceted challenges to human health.This editorial elucidates the extensive impact of climate change on health,emphasising the increasing burden of diseases and the exacerbation of health disparities.It highlights the critical role of the healthcare sector,particularly anaesthesia,in both contributing to and mitigating climate change.It is a call to action for the medical community to recognise and respond to the health challenges posed by climate change.

Research Progress on Flexible Ureteroscopy

The ureteroscopic surgical technique has developed rapidly in recent years and has become an important method of urological surgery. The manufacturing and production of corresponding ureteroscopes are also constantly improving. This article systematically reviews and analyzes existing literature, summarizes the characteristics of various ureteroscopes in recent years, studies the advantages and disadvantages of ureteroscopes with different characteristics, summarizes relevant clinical experience in the use of ureteroscopes, and provides preliminary prospects for the future development of ureteroscopes. The results indicate that disposable electronic ureteroscopes and robotic ureteroscope systems may be an important development direction in the future.

Creep constitutive model considering nonlinear creep degradation of fractured rock

Stability analysis of underground constructions requires a model study of rock masses’ long-term performance. Creep tests under different stress conditions was conducted on intact granite and granite samples fractured at 30° and 45° angles. The experimental results indicate that the steady creep strain rates of intact and fractured rock present an exponential increase trend with the increase of stress level. A nonlinear creep model is developed based on the experimental results, in which the initial damage caused by fracture together with the damage caused by constant load have been taken into consideration. The fitting analysis results indicated that the model proposed is more accurate at identifying the full creep regions in fractured granite, especially the accelerated stage of creep deformation. The least-square fit error of the proposed creep model is significantly lower than that of Nishihara model by almost an order of magnitude. An analysis of the effects of elastic modulus, viscosity coefficient, and damage factors on fractured rock strain rate and creep strain is conducted. If no consideration is given to the effects of the damage, the proposed nonlinear creep model can degenerate into to the classical Nishihara model.

Body composition and metabolic syndrome in patients with type 1 diabetes

BACKGROUND In recent years,the prevalence of obesity and metabolic syndrome in type 1 diabetes(T1DM)patients has gradually increased.Insulin resistance in T1DM deserves attention.It is necessary to clarify the relationship between body composition,metabolic syndrome and insulin resistance in T1DM to guide clinical treatment and intervention.AIM To assess body composition(BC)in T1DM patients and evaluate the relationship between BC,metabolic syndrome(MS),and insulin resistance in these indi-viduals.METHODS A total of 101 subjects with T1DM,aged 10 years or older,and with a disease duration of over 1 year were included.Bioelectrical impedance analysis using the Tsinghua-Tongfang BC Analyzer BCA-1B was employed to measure various BC parameters.Clinical and laboratory data were collected,and insulin resistance was calculated using the estimated glucose disposal rate(eGDR).RESULTS MS was diagnosed in 16/101 patients(15.84%),overweight in 16/101 patients(15.84%),obesity in 4/101(3.96%),hypertension in 34/101(33.66%%)and dyslip-idemia in 16/101 patients(15.84%).Visceral fat index(VFI)and trunk fat mass were significantly and negatively correlated with eGDR(both P<0.001).Female patients exhibited higher body fat percentage and visceral fat ratio compared to male patients.Binary logistic regression analysis revealed that significant factors for MS included eGDR[P=0.017,odds ratio(OR)=0.109],VFI(P=0.030,OR=3.529),and a family history of diabetes(P=0.004,OR=0.228).Significant factors for hypertension included eGDR(P<0.001,OR=0.488)and skeletal muscle mass(P=0.003,OR=1.111).Significant factors for dyslipidemia included trunk fat mass(P=0.033,OR=1.202)and eGDR(P=0.037,OR=0.708).CONCLUSION Visceral fat was found to be a superior predictor of MS compared to conventional measures such as body mass index and waist-to-hip ratio in Chinese individuals with T1DM.BC analysis,specifically identifying visceral fat(trunk fat),may play an important role in identifying the increased risk of MS in non-obese patients with T1DM.

Use of a disposable circumcision suture device versus conventional circumcision： a systematic review and meta-analysis

This systematic review assessed the safety and efficacy of the disposable circumcision suture device （DCSD） and conventional circumcision （CC） in the treatment of redundant prepuce and phimosis. Two independent reviewers conducted a literature search for randomized controlled trials （RCTs） using the DCSD and CC for the treatment of redundant prepuce or phimosis in China and abroad. Nine RCTs （1898 cases） were included. Compared with the CC group, the DCSD group had a shorter operative time （standardized mean difference [SMD] = -21.44; 95% confidence intervals [95% CIs] [-25.08, -17.79]; P 〈 0.00001）, shorter wound healing time （SMD = -3.66; 95% CI [-5.46, -1.85]; P 〈 0.0001）, less intraoperative blood loss （SMD = -9.64; 95% CI [-11.37, -7.90]; P 〈 0.00001）, better cosmetic penile appearance （odds ratio [OR] =8.77; 95% CI [5.90, 13.02]; P 〈 0.00001）, lower intraoperative pain score, lower 24-h postoperative pain score, lower incidence of infection, less incision edema, and fewer adverse events. There were no differences between the CC and DCSD groups in the incidences of dehiscence, or hematoma. The results of this meta-analysis indicate that the DCSD appears to be safer and more effective than CC. However, additional high-quality RCTs with larger study populations are needed.

Managing the surge:A comprehensive review of the entire disposal framework for retired lithium-ion batteries from electric vehicles

Anticipating the imminent surge of retired lithium-ion batteries(R-LIBs)from electric vehicles,the need for safe,cost-effective and environmentally friendly disposal technologies has escalated.This paper seeks to offer a comprehensive overview of the entire disposal framework for R-LIBs,encompassing a broad spectrum of activities,including screening,repurposing and recycling.Firstly,we delve deeply into a thorough examination of current screening technologies,shifting the focus from a mere enumeration of screening methods to the exploration of the strategies for enhancing screening efficiency.Secondly,we outline battery repurposing with associated key factors,summarizing stationary applications and sizing methods for R-LIBs in their second life.A particular light is shed on available reconditioning solutions,demonstrating their great potential in facilitating battery safety and lifetime in repurposing scenarios and identifying their techno-economic issues.In the realm of battery recycling,we present an extensive survey of pre-treatment options and subsequent material recovery technologies.Particularly,we introduce several global leading recyclers to illustrate their industrial processes and technical intricacies.Furthermore,relevant challenges and evolving trends are investigated in pursuit of a sustainable end-of-life management and disposal framework.We hope that this study can serve as a valuable resource for researchers,industry professionals and policymakers in this field,ultimately facilitating the adoption of proper disposal practices.