Design of Non-contact On-load Automatic Regulating Voltage Transformer

At present, an automatic-mechanic contact tap-changer is widely used in power system, but it can not frequently operate. In addition, arc will occur when the switch changes. In order to solve these two problems, this paper presented an automatic on-load voltage-regulating distributing transformer which employed non-contact solid-state relay as tap-changer, and mainly introduced its structure, basic principal, design method of each key link and experimental results. Laboratory simulation experiments informed that the scheme was feasible. It was a smooth and effective experiment device, which was practical in application.

Spatial batch optimal design based on self-learning Gaussian process models for LPCVD processes

Low pressure chemical vapor deposition(LPCVD) is one of the most important processes during semiconductor manufacturing.However,the spatial distribution of internal temperature and extremely few samples makes it hard to build a good-quality model of this batch process.Besides,due to the properties of this process,the reliability of the model must be taken into consideration when optimizing the MVs.In this work,an optimal design strategy based on the self-learning Gaussian process model(GPM) is proposed to control this kind of spatial batch process.The GPM is utilized as the internal model to predict the thicknesses of thin films on all spatial-distributed wafers using the limited data.Unlike the conventional model based design,the uncertainties of predictions provided by GPM are taken into consideration to guide the optimal design of manipulated variables so that the designing can be more prudent Besides,the GPM is also actively enhanced using as little data as possible based on the predictive uncertainties.The effectiveness of the proposed strategy is successfully demonstrated in an LPCVD process.

Production analysis of functionally distributed machines for underground mining

Recent years, underground mining method is becoming popular because of its potentially high productivity and efficiency. In this method, a mining machinery; load haul dump(LHD), is used as both an excavator and a transporter of ore. This paper proposes a distributed system that realizes the excavation and transport functions with separated vehicles, an excavator and a transporter. In addition, this research proposes a mining map and configurations suitable for the proposed distributed system. To evaluate the productivity of the proposed system, a simulation environment has been developed. Analysis using the simulator reveals what performance factors of the excavator and the transporter have large impacts on the productivity. Simulation results also demonstrate the difference of potential between LHD system and the distributed system that can be explained based on their functions allocation.

Parametric Collaborative Design of Network-based Mechanical Products

Aiming at the problems of low-level information sharing, slow transmission and repetitive work in the designing process of product series, the internet-oriented parametric collaborative design method is proposed, in which the problems of sharing conflict and network heterogeneous in the distributed collaborative design are analyzed, and the construction method of collaborative design platforms based on PDMWorks Workgroup is put forward. Through studying the mechanism of roles distribution and function allocation and data concurrency control, the communication mechanism of internet-oriented collaborative design is formulated. On the basis of structure features of overhead travelling crane, through combining parametric variant design with collaborative design, internet-oriented parametric collaborative design system of overhead travelling crane is developed and verified through main girder design. In the paper, the internet-oriented parametric collaborative design method is proposed, aiming to solve the problems of low-level information sharing, slow transmission and repetitive work in the designing process of product series. The problems of sharing conflict and network heterogeneous in the distributed collaborative design are analyzed. The construction method of collaborative design platforms based on PDMWorks Workgroup is put forward. The communication mechanism of internet-oriented collaborative design is formulated, through studying the mechanism of roles distribution and function allocation and data concurrency control. On the basis of structure features of overhead travelling crane, through combining parametric variant design with collaborative design, internet-oriented parametric collaborative design system of overhead travelling crane is developed and verified through main girder design.

Knowledge-Based Platform for Collaborative Innovation Development of Products

The platform of distributed design and resource sharing is important for medium-sized and small companies in developing products to improve competitiveness. As a background of creative product design, a knowledge model based on product collaborative innovation development of products (CIDP) is proposed. Characteristics of CIDP are analyzed, and the framework and key technologies of the CIDP-platform based knowledge studied. Through integration of existing system and interface designs, a development platform has been built to support the PCID within knowledge-based engineering (KBE). An example is presented, indicating that the prototype system is maneuverable and practical.

CHARACTERISTCS OF FLUID FILM IN OPTIMIZED SPIRAL GROOVE MECHANICAL SEAL

In order to investigate the sealing performance variation resulted from the thermal deformation of the end faces, the equations to calculate the fluid film pressure distribution, the bearing force and the leakage rate are derived, for the fluid film both in parallel gap and in wedgy gap. The geometrical parameters of the sealing members are optimized by means of heat transfer analysis and complex method. The analysis results indicate that the shallow spiral grooves can generate hydrodynamic pressure while the rotating ring rotates and the bearing force of the fluid film in spiral groove end faces is much larger than that in the flat end faces. The deformation increases the bearing force of the fluid film in flat end faces, but it decreases the hydrodynamic pressure of the fluid film in spiral groove end faces. The gap dimensions which determine the characteristics of the fluid film is obtained by coupling analysis of the frictional heat and the thermal deformation in consideration of the equilibrium condition of the bearing force and the closing force. For different gap dimensions, the relation- ship between the closing force and the leakage rate is also investigated, based on which the leakage rate can be controlled by adjusting the closing force.

Cooperative Guidance Law Design for Simultaneous Attack with Multiple Missiles Against a Maneuvering Target

This paper considers the simultaneous attack problem of multiple missiles against a maneuvering target. Different from most of the existing literature in which the simultaneous attack problem is formulated as a consensus problem of missiles＇ time-to-go estimates, this paper formulates it as the consensus problem of missiles＇ ranges-to-go. Based on this strategy, novel distributed guidance laws are proposed to solve the simultaneous attack problem with the target of unknown maneuverability.Adaptive control method is introduced to estimate the upper bound of the target＇s acceleration. The effectiveness of the proposed guidance laws is verified both theoretically and numerically.

Waveguide distribution system of the HEPS linac

Purpose The High-Energy Photon Source(HEPS)is a 6 GeV storage ring-based light source under construction in Beijing,China.Its accelerator consists of a 6 GeV storage ring,a full-energy booster,an S-band normal-conducting 500 MeV linac,and three transport lines.As the beginning of HEPS,a stable linac is quite important,which needs a qualified waveguide distribution system to transmit microwave power from klystrons to accelerating structures.Methods Installation and high-power conditioning of the HEPS linac were performed from February to September 2022.The assembly and conditioning of the waveguide distribution system were completed in April and July,respectively.The design of the waveguide distribution system began in 2018 and was finalized at the end of 2020 after multiple iterations.Results Owing to careful design,fabrication,and assembly preparation,the assembly and conditioning of the system proceeded smoothly and considerable time was saved.Conclusion The entire process from the design to the ultimate realization of the system is introduced in detail in this paper.Satisfactory measurement results were obtained for some waveguide components.

Particle size distribution design of limited agglomeration via geometric morphology in erythritol crystallization

Regarding sugar and salt crystallization with large single crystals,the agglomerate thermodynamics and geometric morphologies,not the dynamics,dominate the particle size distribution(PSD).To consider this issue,a PSD design model is proposed for limited large crystal agglomeration.In this model,the agglomeration thermodynamic criticality is determined by estimating the adhesion and dispersion forces between single crystals.The geometric agglomerate morphologies are described by corresponding single crystal units stacking with porosity.By seed well-controlled of population,the key parameters of PSD(D01,D50 and D99)are precisely designed.For erythritol,the model design accuracies are 92%–99%in the 1.2 L and 10 L crystallizers,indicating that it can design PSD at various crystallization scales.Concerning the general research attention to microcrystal agglomeration kinetics(mostly active pharmaceutical ingredients),this model effectively guides the sugar and salt PSD design with limited large crystal agglomeration.

Clinical efficacy observation of thalamic pain treated with acupuncture under the guidance of evidence-based medicine

Objective To study the feasibility of the crossover trial design and the minimal imbalance index random distribution method in the clinical small-sample-size randomized controlled trial（RCT） research of thalamic pain treated with acupuncture under the guidance of evidence-based medicine（EBM）.Methods The crossover trial design was adopted.Eleven cases with the definite diagnosis were randomized into a program-I group（6 cases,treated with acupuncture before western medicine） and a program-II group（5 cases,treated with western medicine before acupuncture） according to the minimal imbalance index method.In the statistical analysis,the groups were named as an acupuncture group and a western medicine group separately,11 cases in each one.Acupuncture was applied to Xìmén（郄门 PC 4）,Yīnxì（阴郄 HT 6）,Xuèhǎi（血海 SP 10）,etc.In the control treatment,Carbamazepine was prescribed for oral administration.Either the duration of treatment or the wash-out period was 10 days.The visual analogue scale（VAS） was adopted for the efficacy assessment.Results The total effective was 100.0%（11/11） after treatment in either group.The remarkably effective rates were 63.6%（7/11） and 36.4%（4/11） in the acupuncture group and the western medicine group separately,without statistically significant difference in comparison.Conclusion The crossover trial design and the minimal imbalance index distribution method can accomplish RCT of the clinical acupuncture and moxibustion research with the small sample size involved.They can provide the high-quality evidences for clinical acupuncture research.Acupuncture therapy can achieve the same therapeutic effect as Carbamazepine,the common western medicine,and the efficacy of it is potentially superior to that of western medicine.