Internal structures and high-velocity frictional properties of Longmenshan fault zone at Shenxigou activated during the 2008 Wenchuan earthquake

This paper reports internal structures of a wide fault zone at Shenxigou,Dujiangyan,Sichuan province,China,and high-velocity frictional properties of the fault gouge collected near the coseismic slip zone during the 2008 Wenchuan earthquake.Vertical offset and horizontal displacement at the trench site were 2.8 m（NW side up）and 4.8 m（right-lateral）,respectively.The fault zone formed in Triassic sandstone,siltstone,and shale about 500 m away from the Yingxiu-Beichuan fault,a major fault in the Longmenshan fault system.A trench survey across the coseismic fault,and observations of outcrops and drill cores down to a depth of 57 m revealed that the fault zone consists of fault gouge and fault breccia of about0.5 and 250-300 m in widths,respectively,and that the fault strikes N62°E and dips 68° to NW.Quaternary conglomerates were recovered beneath the fault in the drilling,so that the fault moved at least 55 m along the coseismic slip zone,experiencing about 18 events of similar sizes.The fault core is composed of grayish gouge（GG） and blackish gouge（BG） with very complex slip-zone structures.BG contains low-crystalline graphite of about 30 %.High-velocity friction experiments were conducted at normal stresses of 0.6-2.1 MPa and slip rates of 0.1-2.1 m/s.Both GG and BG exhibit dramatic slip weakening at constant high slip rates that can be described as an exponential decay from peak friction coefficient lpto steadystate friction coefficient lssover a slip-weakening distance Dc.Deformation of GG and BG is characterized by overlapped slip-zone structures and development of sharp slickenside surfaces,respectively.Comparison of our data with those reported for other outcrops indicates that the high-velocity frictional properties of the Longmenshan fault zones are quite uniform and the high-velocity weakening must have promoted dynamic rupture propagation during the Wenchuan earthquake.

North slope transition zone of Songnan-Baodao sag in Qiongdongnan Basin and its control on medium and large gas fields,South China Sea

Based on analysis of newly collected 3D seismic and drilled well data,the geological structure and fault system of Baodao sag have been systematically examined to figure out characteristics of the transition fault terrace belt and its control on the formation of natural gas reservoirs.The research results show that the Baodao sag has the northern fault terrace belt,central depression belt and southern slope belt developed,among them,the northern fault terrace belt consists of multiple transition fault terrace belts such as Baodao B,A and C from west to east which control the source rocks,traps,reservoirs,oil and gas migration and hydrocarbon enrichment in the Baodao sag.The activity of the main fault of the transition belt in the sedimentary period of Yacheng Formation in the Early Oligocene controlled the hydrocarbon generation kitchen and hydrocarbon generation potential.From west to east,getting closer to the provenance,the transition belt increased in activity strength,thickness of source rock and scale of delta,and had multiple hydrocarbon generation depressions developed.The main fault had local compression under the background of tension and torsion,giving rise to composite traps under the background of large nose structure,and the Baodao A and Baodao C traps to the east are larger than Baodao B trap.Multiple fault terraces controlled the material source input from the uplift area to form large delta sand bodies,and the synthetic transition belt of the west and middle sections and the gentle slope of the east section of the F12 fault in the Baodao A transition belt controlled the input of two major material sources,giving rise to a number of delta lobes in the west and east branches.The large structural ridge formed under the control of the main fault close to the hydrocarbon generation center allows efficient migration and accumulation of oil and gas.The combination mode and active time of the main faults matched well with the natural gas charging period,resulting in the hydrocarbon gas enrichment.Baodao A transition belt is adjacent to Baodao 27,25 and 21 lows,where large braided river delta deposits supplied by Shenhu uplift provenance develop,and it is characterized by large structural ridges allowing high efficient hydrocarbon accumulation,parallel combination of main faults and early cessation of faulting activity,so it is a favorable area for hydrocarbon gas accumulation.Thick high-quality gas reservoirs have been revealed through drilling,leading to the discovery of the first large-scale gas field in Baodo 21-1 of Baodao sag.This discovery also confirms that the north transition zone of Songnan-Baodao sag has good reservoir forming conditions,and the transition fault terrace belt has great exploration potential eastward.

Analysis of microstructure and performance of temper bead welded joints for SA508-3 steel by Quenching and Tempering mode

The HAZ microstructure and performance of Quenching and Tempering mode temper bead welding and general welded joints which were made on SA508-3 steel of 60 mm thickness were compared in this article. The result shows that tempering sorbite which has excellent overall performance was obtained in both modes. The microstructure of Quenching and Tempering mode welded joints got more fine grain. Even though the hardness of tempering bead welded joints is higher than the general one,it still meets the standards which is lower than 350 HV. The impact absorbing energy of each district of tempering bead welded joints HAZ reached 170 J,which is equal to general one.

Spatial-temporal variation of the land surface temperature field and present-day tectonic activity

This study attempts to acquire information on tectonic activity in western China from land surface temperature （LST） field data. On the basis of the established relationship between heat and strain, we analyzed the LSTdistribution in western China using the satellite data product MODIS/Terra. Our results show that： 1. There are departures from annual changes of LSTin some areas, and that these changes are associated with the activity of some active tectonic zones. 2. When annual-change background values caused by climate factors are removed, the long-period component （LSTLow） of temperature residual （AT） of the LSTis able to serve as an indicator for tectonic activity. We have found that a major earthquake can produce different effects on the/ST fields of surrounding areas. These effects are characterized by both rises and drops in temperature. For example, there was a noteworthy temperature decline associated with the Sumatran M9 earthquake of 2004 in the Bayan Har-Songpan block of central Tibetan Plateau. 3. On the other hand, the LST field of a single area may respond differently to major shocks occurring in different areas in the regions surrounding China. For instance, the Kun- lun M 8.1 event made the LSTon the Longmen Mountains fault zone increase, whereas the Zaisan Lake M 7.9 quake of 2003, and the Sumatran M 9 event of 2004, caused decreases in the same area＇s LST. 4. The variations of land surface temperature （LST） over time are different in different tectonic areas. These phenomena may provide clues for the study of tectonic deformation processes. On the basis of these phenomena, we use a combi- nation of temperature data obtained at varied depths, regional seismicity and strain results obtained with GPS measurements, to test the information related to tectonic activity derived from variations of the LST field, and discuss its implications to the creation of models of regional tectonic deformation.

Transpressive Deformation across Tongbo-Dabie Orogenic Belt

Deformation characteristics of the dextral Dashankou ductile shear zone , parallel to the Tongbo-Dabie Orogenic Belt and regional stretching lineation patterns within the blueschist belt in Northern Hubei , China , are examined at various scales , respectively . The new data , combined with those obtained in the Wudangshan area , indicate a transpressive deformation involving a WNW directed nearly horizontal shearing accompanied by shortening across the orogenic belt . A kinematic model is proposed for development of the deformation within the Tongboshan segment . Based on these findings it can be seen that the convergence and collision between the North China Craton and the Yangtze Craton may locally be oblique during the Proterozoic Jinningian Orogeny . This oblique collision is probably related to a certain extent to the shapes of the older craton margins .

Development of Melanoma and Cancer without Decreasing of Cambial Cells Number in Morphofunctional Zones

In age groups from 20 to 60 years old, proliferation and differentiation of cells happen in a morphofunctional zone, in the electric field excited by 12 pairs of mother and daughter cells, turned out at cambial cells division. Thus in daughter cells the Src SH2 domain necessary both for cytoskeleton formation and tyrosinase activization is activated. If the conditions for strengthening of tyrosinase activity are created in organism, the portion of Src participating in the cytoskeleton building can decrease to critical level that will lead to development of a malignant tumor. If action of a stimulating factor is quite strong, proliferation of malignant cells begins at a stage of melanocyte, and a melanoma occurs. If action of factors is long and not strong, more remote descendants of daughter cells proliferate, and a cancer appears. In order that there will be a normal differentiation of malignantly changed daughter cells, it is necessary to block the tyrosinase. Thus all SH2 domains will go on cell cytoskeleton formation.

输运溶剂浮区法生长Bi_(2+x)Sr_(2-x)Ca_(n-1)Cu_nO_(2n+4+d)晶体

The growth of crystals of the high T c oxide superconductors has been hampe red by the complexities of the materials and their phase diagrams.The most common crys tal growth technique adopted for these oxides is the “flux”method,where the st arting materials are solved in a melt,which is usually formed by excess CuO and BaO or a KCl/NaCl mixture.The crystals are produced by slow cooling of the heate d solvent.This method,however,suffers from several disadvantages: (1) the crystals are contaminated with the crucible material, (2) the crystals are difficult to remove from the crucible, (3) the crystals contain flux inclusions.

A multi-mineral model for predicting petrophysical properties of complex metamorphic reservoirs:Case study of the Bozhong Depression,Bohai Sea

Interpreting reservoir properties through log data and logging responses in complex strata is critical for efficient petroleum exploitation,particularly for metamorphic rocks.However,the unsatisfactory accuracy of such interpretations in complex reservoirs has hindered their widespread application,resulting in severe inconvenience.In this study,we proposed a multi-mineral model based on the least-square method and an optimal principle to interpret the logging responses and petrophysical properties of complex hydrocarbon reservoirs.We began by selecting the main minerals based on a comprehensive analysis of log data,X-ray diffraction,petrographic thin sections and scanning electron microscopy(SEM)for three wells in the Bozhong 19-6 structural zone.In combination of the physical properties of these minerals with logging responses,we constructed the multi-mineral model,which can predict the log curves,petrophysical properties and mineral profile.The predicted and measured log data are evaluated using a weighted average error,which shows that the multi-mineral model has satisfactory prediction performance with errors below 11%in most intervals.Finally,we apply the model to a new well“x”in the Bozhong 19-6 structural zone,and the predicted logging responses match well with measured data with the weighted average error below 11.8%for most intervals.Moreover,the lithology is dominated by plagioclase,K-feldspar,and quartz as shown by the mineral profile,which correlates with the lithology of the Archean metamorphic rocks in this region.It is concluded that the multi-mineral model presented in this study provides reasonable methods for interpreting log data in complex metamorphic hydrocarbon reservoirs and could assist in efficient development in the future.

一种低电压无死区鉴频鉴相器

提出了一种高性能低电压无死区鉴频鉴相器(PFD)电路,并通过时钟分析优化其设计参数。阐述了恢复时间对PFD电路最大工作频率的影响以及降低PFD恢复时间的设计方法,仿真结果同理论极为相符。

Seismic Sequence in Carbonate Rocks By Vibrational Liquefaction

On the basis of the records of strong seismic events taking place in soft carbonate sediments, a new seismic sequence system of vibrational liquefaction is established, which consists of a series of units, such as escaped structure of micrite veins and liquefied deformation formed in the period of seismic liquefaction, land subsidence structure after liquefaction, tsunamic hummocky and turbidite produced by seismic events, This sequence is a generalization and summation of field observation in vast areas, which shows the whole process of a strong seismic event and provides an unified theoretical explanation. The pattern of the seismic sequence by vibrational liquefaction provides one of correlation standards for geologists in the field to discriminate events in carbonate sequences. Based on the pattern of seismic sequence, the authors first advance a new conception of the Palaeo-Tanlu (Tancheng-Lujiang) Zone and discuss primarily its geological significations.

Crust and upper mantle structures beneath Northeast China from receiver function studies

P-wave and S-wave receiver function analyses have been performed along a profile consisted of 27 broadband seismic stations to image the crustal and upper mantle discontinuities across Northeast China. The results show that the average Moho depth varies from about 37 km beneath the Daxing＇anling orogenic belt in the west to about 33 km beneath the Songliao Basin, and to about 35 km beneath the Changbai mountain region in the east. Our results reveal that the Moho is generally flat beneath the Daxing＇anling region and a remarkable Moho offset （about 4 km） exists beneath the basin-mountain boundary, the Daxing＇anling-Taihang Gravity Line. Beneath the Tanlu faults zone, which seperates the Songliao Basin and Changbai region, the Moho is uplift and the crustal thick- ness changes rapidly. We interpret this feature as that the Tanlu faults might deeply penetrate into the upper mantle, and facilitate the mantle upwelling along the faults during the Cenozoic era. The average depth of the lithosphereasthenosphere boundary （LAB） is - 80 km along the profile which is thinner than an average thickness of a continental lithosphere. The LAB shows an arc-like shape in the basin, with the shallowest part approximately beneath the center of the basin. The uplift LAB beneath the basin might be related to the extensive lithospheric stretching in the Mesozoic. In the mantle transition zone, a structurally complicated 660 km discontinuity with a maximum 35 km depression beneath the Changbai region is observed. The 35 km depression is roughly coincident with the location of the stagnant western pacific slab on top of the 660 km discontinuity revealed by the recent P wave tomography.

Effect of cooling time t8/5 on microstructure and toughness of Nb-Ti- Mo microalloyed C-Mn steel

In order to further optimize welding process of Nb-Ti-Mo microalloyed steel, welding thermal cycles on coarse-grained heat-affected zone （CGHAZ） of welded joints were simulated using Gleeble 1500. The microstructure and low-temperature impact fracture were investigated using a scanning electron microscope and a pendulum impact machine, respectively. Moreover, the relationship between cooling time ts/5 and the microstructure of CGHAZ was discussed, and the effect of microstructure on impact toughness was also studied. As cooling time increased, martensite fraction decreased from 97.8% （3 s） to 3.0% （60 s）. The fraction of martensite/austenite （M/A） constituent increased from 2.2% （3 s） to 39.0% （60 s）, its shape changed from granular to strip, and the maximum length increased from 2.4 μm （3 s） to 7.0 μm （60 s）. As cooling time increased, the prior austenite grain size increased from 34.0 μm （3 s） to 49.0 gm （60 s）, the impact absorption energy reduced from 101.8 J （5 s） to 7.2 J （60 s）, and the fracture mechanism changed from quasi-cleavage fracture to cleavage fracture. The decreased toughness of CGHAZ was due to the reduction of lath martensite-content, coarsening of original austenite grain, and increase and coarsening of M/A constituent. The heat input was controlled under 7 kJ cm-1 during actual welding for these steels.

New production in the South China Sea——A coupled ^(228)Ra-nitrate approach

Measurement of 228Ra activities in the upper 300 m water column was conducted at two stations in the South China Sea using an MnO2-fiber extraction/β-counting technique of 228Ac. Results showed that 228Ra activities ranged from 0.38 to 3.60 Bq·m-3. The vertical profiles of 228Ra at the time-series station favored a steady state assumption. Based on a one-dimensional steady state model, 228Ra-nitrate coupled approach was applied to stations NS97-43, NS99-53 (T1), NS99-53 (T2). New production thus quantified were 4.4, 5.1 and 5.7 mmolC·m-2·d-1, respectively. f ratios in the South China Sea were estimated from the derived new production and the documented primary productivity in the regime, to be 0.12-0.15.

EFFECT OF DISCHARGE RATIO ON FLOW CHARACTERISTICS IN 90°EQUAL-WIDTH OPEN-CHANNEL JUNCTION

For the 90° equal-width open-channel junction flow, the Reynolds averaged Navier-Stokes equations are solved while using the 3-D κ- ω model. The mean flow pattern and the secondary current are obtained. The model is validated by experimental data, and then applied to investigate the effect of the discharge ratio on the shape of separation zone shape, the cross-sectional mean flow angle and the contraction coefficient. The results are fairly close to those of the prior studies. The numerical modeling is both less time-consuming and less expensive to obtain the various flow parameters needed for engineering design.

Reservoir forming conditions and key exploration technologies of Lingshui 17-2 giant gas field in deepwater area of Qiongdongnan Basin

On September 15,2014,China National Offshore Oil Co.,Ltd announced that a high production of oil and gas flow of 1.6
106 m3/d was obtained in Well LS17-2-1 in deepwater area in northern South China Sea,which is the first great oil and gas discovery for self-run deepwater exploration in China sea areas,and a strategic breakthrough was made in natural gas exploration in deepwater area of Lingshui sag in Qiongdongnan Basin.Under the combined action of climax of international deepwater exploration,high oil prices,national demands of China,practical needs of exploration,breakthroughs in seismic exploration and testing technologies,innovations in geological cognition and breakthroughs in deepwater operation equipment,Lingshui 17-2 gas field is discovered.Among these factors,the innovation in reservoir forming geological cognition directly promotes the discovery.The quality of seismic data in the early time is poor,so key reservoir forming conditions such as effective source rocks,high quality reservoirs and oil-gas migration pathways are unable to be ascertained;with support of new seismic acquisition and processing technology,some researches show that Lingshui sag is a successive large and deep sag with an area of 5000 km2 and the maximum thickness of Cenozoic stratum of 13 km.In the Early Oligocene,the Lingshui sag was a semi-closed delta-estuarine environment,where the coalmeasure and marine mudstones in Lower Oligocene Yacheng Formation were developed.The Lingshui sag is a sag with high temperature,and the bottom temperature of source rocks in Yacheng Formation can exceed 250C,but the simulation experiment of hydrocarbon generation at high temperature indicates that the main part of this set of source rock is still in the gas-generation window,with resources of nearly 1 trillion cubic meters,so the Lingshui sag is a hydrocarbon-rich generation sag.In the Neogene,the axial canyon channel from the Thu Bon River in Vietnam passed through the Lingshui sag,and five stages of secondary channels were developed in the axial canyon channel,where four types of reservoirs with excellent physical properties including the axial sand,lateral accretion sand,natural levee sand as well as erosion residual sand were developed,and lithologic traps or structural-lithologic traps were formed.The diapiric zone in the southern Lingshui sag connects deep source rocks in Yacheng Formation and shallow sandstones in the channels,and the migration pattern of natural gas is a T-type migration pattern,in other words,the natural gas generated from Yacheng Formation migrates vertically to the interior of the channel sandbody,and then migrates laterally in the channel reservoirs and forms the reservoirs.Innovations of geophysical exploration technologies for complicated geological conditions of deepwater areas are made,such as the detuning comprehensive quantitative amplitude hydrocarbon detection technology,which greatly improves the success rate of deepwater exploration;key technologies of deepwater safety exploratory well testing represented by the platform-dragged riser displacement technology are developed,which greatly reduces the drilling test cost.The above key exploration technologies provide a strong guarantee for the efficient exploration and development of Lingshui gas field.