The Singularities of Gravitational Fields of Static Thin Loop and Double Spheres Reveal the Impossibility of Singularity Black Holes

In the classical Newtonian mechanics, the gravity fields of static thin loop and double spheres are two simple but foundational problems. However, in the Einstein’s theory of gravity, they are not simple. In fact, we do not know their solutions up to now. Based on the coordinate transformations of the Kerr and the Kerr-Newman solutions of the Einstein’s equation of gravity field with axial symmetry, the gravity fields of static thin loop and double spheres are obtained. The results indicate that, no matter how much the mass and density are, there are singularities at the central point of thin loop and the contact point of double spheres. What is more, the singularities are completely exposed in vacuum. Space near the surfaces of thin loop and spheres are highly curved, although the gravity fields are very weak. These results are inconsistent with practical experience and completely impossible. By reasonable analogy, black holes with singularity in cosmology and astrophysics are something illusive. Caused by the mathematical description of curved space-time, they do not exist in real world actually. If there are black holes in the universe, they can only be the types of the Newtonian black holes without singularities, rather than the Einstein’s singularity black holes. In order to escape the puzzle of singularity thoroughly, the description of gravity should return to the traditional form of dynamics in flat space. The renormalization of gravity and the unified description of four basic interactions may be possible only based on the frame of flat space-time. Otherwise, theses problems can not be solved forever. Physicists should have a clear understanding about this problem.

Gene editing for corneal disease management

Gene editing has recently emerged as a promising technology to engineer genetic modifications precisely in the genome to achieve long-term relief from corneal disorders.Recent advances in the molecular biology leading to the development of clustered regularly interspaced short palindromic repeats(CRISPRs) and CRISPR-associated systems,zinc finger nucleases and transcription activator like effector nucleases have ushered in a new era for high throughput in vitro and in vivo genome engineering.Genome editing can be successfully used to decipher complex molecular mechanisms underlying disease pathophysiology,develop innovative next generation gene therapy,stem cell-based regenerative therapy,and personalized medicine for corneal and other ocular diseases.In this review we describe latest developments in the field of genome editing,current challenges,and future prospects for the development of personalized genebased medicine for corneal diseases.The gene editing approach is expected to revolutionize current diagnostic and treatment practices for curing blindness.

“Eternal Motion” as a “Form of Movement of a Special Nature” and the Main Condition for the Creation of the Universe

The article hypothesizes that DE and DM (UCM) are a “Form of Motion of a Special Nature”, where “Form of Motion” means “Eternal Motion” as the power of dynamics of different levels and varying degrees of self-sufficiency, and by “Special Nature”, gravitational and two other properties of matter, “tied” to the “Eternal Movement” and completely dependent on it. Carriers of key properties of a “Special Nature” have been established: “0”-DE particles and “3”-DM particles (UDM). The unity of their inherent “motionally-gravitational” properties and the peculiarity of the relationship between “motion” and “gravity” are revealed: the higher the intensity of “Eternal Motion”, the stronger the gravitational properties of matter are manifested (and vice versa). The relationship of “time” with the “vibration frequency” and the “mass” of photons with the “degree of bonding and deformation properties of the field” is shown. The maximum level of gravity has been determined, which allows Nature to successfully create the Universe: such a landmark is the proximity to the property of the Primary Source—the “pure graviton” of the OSP space, the most powerful “motionally-gravitational” particle of the Universe. The reasons for the emergence of such an identity of the gravitational properties of particles with the indicators of a “pure graviton” are established: for “0”-DE particles, this is the acquisition of the function of “freedom of movement”;for “3”-DM particles (UDM), the creation of a special structure—a “double field” (“Main” and “Small”). The presence in the “double field” of specific “tools” for the creation of the worlds of the Universe—gravitational “waves” gives rise to impulses (shocks) of varying intensity and shape. A list of functions performed by “waves” in the “Main” and “Small” fields has been compiled. The specific conditions for the formation of “UDM Streams”, their transformation into a “Vortex” and, under the influence of a powerful Initial Impulse (push), sending them to the “place” of the creation of galaxies, are shown. It is suggested that there is a “Cycle of Matter in Nature” in the closed structure of our Universe due to the “work” of “waves” and the functioning of special “factories” in the form of exotic space objects—Black holes.

A New Inversion Method of Sedimentary Strata For Deriving Double Parameters and Its Applications

The inverse problem of wave equation is the importance of study not only in seismic prospecting but also in applied mathematics. With the development of the research, the inverse methods of 1 - D wave equations have been trending towards the multiple parameters inversion . We have obtained an inverse method with double -parameter, in which medium density and wave velocity can be derived simultaneously. In this paper, to increase the inverse accuracy, the method is improved as follows. Firstly, the formula in which the Green Function is omitted are derived and used. Secondly, the regularizing method is reasonable used by choosing the stable function. With the new method, we may derive elastic parameter and medium density or medium density and wave velocity. Thus, lithology parameters for seismic prospecting may be obtained.After comparing the derived values from the new method with that from previous method, we obtain the new method through which substantially improve the derived accuracy . The new method has been applied to real depths inversion for sedimentary strata and volcanic rock strata in Chaoyanggou Terrace of Songliao Basin in eastern China. According to the inverse results,the gas - bearing beds are determlned.

Color and Gloss Changes of a Lignin-Based Polyurethane Coating under Accelerated Weathering

The purpose of this research study was to investigate the properties of polyurethane coatings based on lignin nano-particles.For this purpose,the prepared coatings were applied to pine wood surfaces and weathered artificially.Subsequently,color and gloss of the coatings were measured before and after the weathering test.Field emission scanning electron microscopy(FE-SEM)micrographs prepared from the coatings showed that the average size of nano-particles in the polyurethane substrate was approximately 500 nm.Nuclear magnetic resonance(13C-NMR)spectroscopy showed that strong urethane bonds were formed in the nano-lignin-based polyurethane.Differential calorimetric analysis(DSC)test revealed that the glass-transition temperature(Tg)of lignin nanoparticles modified with diethylenetriamine(DETA)was 112.8℃ and Tg of lignin nano-particles modified with ethylenediamine(EDA)was 102.5℃,which is lower than the Tg of un-modified lignin(114.6℃)and lignin modified with DETA(126.8℃)and lignin modified with EDA(131.3℃).The coatings modified with lignin nano-particles had a greater change in gloss.The lignin nano-particles in the modified coating are trapping hydroxyl radicals which reduces photoactivity and yellowing of the polyurethane by about 3 times compared to unmodified polyurethane coatings.After weathering test,the nano-lignin-based coating had a rougher surface with a lower contact angle(0.78°)compared to the unmodified polyurethane coating(0.85°).

Qualitative Properties and Numerical Solution of the Kolmogorov-Fisher Type Biological Population Task with Double Nonlinear Diffusion

In the present work we study the global solvability of the Kolmogorov-Fisher type biological population task with double nonlinear diffusion and qualitative properties of the solution of the task based on the self-similar analysis. In additional, in this paper we consider the model of two competing population with dual nonlinear cross-diffusion.

Sol-gel derived HA/TiO_2 double coatings on Ti scaffolds for orthopaedic applications

Hydroxyapatite/titania (HA/TiO2) double layers were coated onto Ti scaffolds throughout for orthopaedic applications by sol-gel method. Differential scanning calorimetry (DSC), thermogravimetric analysis (TG) and X-ray diffractometry (XRD) were used for the characterisation of the phase transformations of the dried gels and coated surface structures. Scanning electron microscope (SEM) equipped with energy dispersive spectrometry (EDS) was used for the observation and evaluation of the morphology and phases of the surface layers and for the assessment of the in vitro tests. The in vitro assessments were performed by soaking the HA/TiO2 double coated samples into the simulated body fluid (SBF) for various periods. The TiO2 dipping-coating method at a speed of 12 cm/min, followed by a heat treatment at 600 ℃ for 20 min. The HA la lyaeyre wr wasa ssu cbosaetqeude bnytl ya dipping-coated on the outer surface at the same speed and then heat-treated at difference temperatures. The results indicat that the HA phase begins to crystallize after a heat treatment at 560 ℃. The crystallinity increases obviously at 760 ℃. SEM observations find no delamination or crack at the interfaces of HA/TiO2 and TiO2/Ti. The HA/TiO2 coated Ti scaffolds displays excellent bone-like apatite forming ability when it is soaked into SBF. Ti scaffolds after HA/TiO2 double coatings can be anticipated as promising implant materials for orthopaedic

Probing the electric double layer structure at nitrogen-doped graphite electrodes by constant-potential molecular dynamics simulations

Electric double layer(EDL)is a critical topic in electrochemistry and largely determines the working performance of lithium batteries.However,atomic insights into the EDL structures on heteroatom-modified graphite anodes and EDL evolution with electrode potential are very lacking.Herein,a constant-potential molecular dynamics(CPMD)method is proposed to probe the EDL structure under working conditions,taking N-doped graphite electrodes and carbonate electrolytes as an example.An interface model was developed,incorporating the electrode potential and atom electronegativities.As a result,an insightful atomic scenario for the EDL structure under varied electrode potentials has been established,which unveils the important role of doping sites in regulating both the EDL structures and the following electrochemical reactions at the atomic level.Specifically,the negatively charged N atoms repel the anions and adsorb Li~+at high and low potentials,respectively.Such preferential adsorption suggests that Ndoped graphite can promote Li~+desolvation and regulate the location of Li~+deposition.This CPMD method not only unveils the mysterious function of N-doping from the viewpoint of EDL at the atomic level but also applies to probe the interfacial structure on other complicated electrodes.

Bio-Based Waterborne Poly(Vanillin-Butyl Acrylate)/MXene Coatings for Leather with Desired Warmth Retention and Antibacterial Properties

This study presents a solvent-free,facile synthesis of a bio-based green antibacterial agent and aromatic monomer methacrylated vanillin(MV)using vanillin.The resulting MV not only imparted antibacterial properties to coatings layered on leather,but could also be employed as a green alternative to petroleum-based carcinogen styrene(St).Herein,MV was copolymerized with butyl acrylate(BA)to obtain waterborne bio-based P(MV-BA)miniemulsion via miniemulsion polymerization.Subsequently,MXene nanosheets with excellent photothermal conversion performance and antibacterial properties,were introduced into the P(MV-BA)miniemulsion by ultrasonic dispersion.During the gradual solidification of P(MV-BA)/MXene nanocomposite miniemulsion on the leather surface,MXene gradually migrated to the surface of leather coatings due to the cavitation effect of ultrasonication and amphiphilicity of MXene,which prompted its full exposure to light and bacteria,exerting the maximum photothermal conversion efficiency and significant antibacterial efficacy.In particular,when the dosage of MXene nanosheets was 1.4 wt%,the surface temperature of P(MV-BA)/MXene nanocomposite miniemulsioncoated leather(PML)increased by about 15℃ in an outdoor environment during winter,and the antibacterial rate against Escherichia coli and Staphylococcus aureus was nearly 100%under the simulated sunlight treatment for 30 min.Moreover,the introduction of MXene nanosheets increased the air permeability,water vapor permeability,and thermal stability of these coatings.This study provides a new insight into the preparation of novel,green,and waterborne bio-based nanocomposite coatings for leather,with desired warmth retention and antibacterial properties.It can not only realize zerocarbon heating based on sunlight in winter,reducing the use of fossil fuels and greenhouse gas emissions,but also improve ability to fight off invasion by harmful bacteria,viruses,and other microorganisms.

Mechanism of Thermally Radiative Prandtl Nanofluids and Double-Diffusive Convection in Tapered Channel on Peristaltic Flow with Viscous Dissipation and Induced Magnetic Field

The application of mathematical modeling to biological fluids is of utmost importance, as it has diverse applicationsin medicine. The peristaltic mechanism plays a crucial role in understanding numerous biological flows. In thispaper, we present a theoretical investigation of the double diffusion convection in the peristaltic transport of aPrandtl nanofluid through an asymmetric tapered channel under the combined action of thermal radiation andan induced magnetic field. The equations for the current flow scenario are developed, incorporating relevantassumptions, and considering the effect of viscous dissipation. The impact of thermal radiation and doublediffusion on public health is of particular interest. For instance, infrared radiation techniques have been used totreat various skin-related diseases and can also be employed as a measure of thermotherapy for some bones toenhance blood circulation, with radiation increasing blood flow by approximately 80%. To solve the governingequations, we employ a numerical method with the aid of symbolic software such as Mathematica and MATLAB.The velocity, magnetic force function, pressure rise, temperature, solute (species) concentration, and nanoparticlevolume fraction profiles are analytically derived and graphically displayed. The results outcomes are compared withthe findings of limiting situations for verification.

Direct Pointwise Comparison of FE Predictions to StereoDIC Measurements:Developments and Validation Using Double Edge-Notched Tensile Specimen

To compare finite element analysis(FEA)predictions and stereovision digital image correlation(StereoDIC)strain measurements at the same spatial positions throughout a region of interest,a field comparison procedure is developed.The procedure includes(a)conversion of the finite element data into a triangular mesh,(b)selection of a common coordinate system,(c)determination of the rigid body transformation to place both measurements and FEA data in the same system and(d)interpolation of the FEA nodal information to the same spatial locations as the StereoDIC measurements using barycentric coordinates.For an aluminum Al-6061 double edge notched tensile specimen,FEA results are obtained using both the von Mises isotropic yield criterion and Hill’s quadratic anisotropic yield criterion,with the unknown Hill model parameters determined using full-field specimen strain measurements for the nominally plane stress specimen.Using Hill’s quadratic anisotropic yield criterion,the point-by-point comparison of experimentally based full-field strains and stresses to finite element predictions are shown to be in excellent agreement,confirming the effectiveness of the field comparison process.

Extended Anode Effect for Tube Inner Coating of Non-Conductive Ceramics by Pulsed Coaxial Magnetron Plasma

For uniform tube inner coating of non-conductive thin films, the double-ended coaxial magnetron pulsed plasma (DCMPP) method was investigated. In this study, coating of TiN and TiO2 was performed. It was clearly shown that the extended anode effect was strongly influenced by the electric resistance of the coated thin films on the inner surface of an insulator tube. Additionally, high frequency (100 kHz) was better for relatively high plasma density. On the other hand, in the case of titanium oxide deposition, negative ion productions drastically decrease the deposition rate and the shifting velocity of plasma main position for coated TiO2 films.

Influence of variable viscosity and double diffusion on the convective stability of a nanofluid flow in an inclined porous channel

The influence of variable viscosity and double diffusion on the convective stability of a nanofluid flow in an inclined porous channel is investigated.The DarcyBrinkman model is used to characterize the fluid flow dynamics in porous materials.The analytical solutions are obtained for the unidirectional and completely developed flow.Based on a normal mode analysis,the generalized eigenvalue problem under a perturbed state is solved.The eigenvalue problem is then solved by the spectral method.Finally,the critical Rayleigh number with the corresponding wavenumber is evaluated at the assigned values of the other flow-governing parameters.The results show that increasing the Darcy number,the Lewis number,the Dufour parameter,or the Soret parameter increases the stability of the system,whereas increasing the inclination angle of the channel destabilizes the flow.Besides,the flow is the most unstable when the channel is vertically oriented.

A Study on Release Property through Self Coating in LSR Injection Process

This study explores the molding processes by using the Multi-component-injection molding (MCM) method, in which monolithic products are molded by attaching mixed liquid-silicone-rubbers (LSRs) to polybutylene terephthalate (PBT) that has the characteristic of self-binding while burning due to Pt catalysts. It is seen that this method increases the binding force between LSR and PBT. The surfaces coated with Polytetrafluoroethylene (PTFE), Cr, Ni, etc. have excellent peeling with plastic and such surfaces are compared with those treated with hot forging die and micro blasting without coating. When peeling tests are performed at the specified polymerization temperature and molding time after LSR molding on these surfaces of hot working die molds without coating, these surfaces show excellent peeling of molds and LSR products. In particular, they show better peeling after micro blasting than surfaces with Cr and Ni coating as well as surfaces without coating, and the peeling strength also decreases. The results of contact angle and XPS analysis indicate that the LSR binding force is enhanced as an effect of catalysts, though it is not found by SEM. According to the XPS analysis, the structures of the surfaces are close to methyl and vinyl materials that are produced while LSR molding.

Pitting corrosion behavior and corrosion protection performance of cold sprayed double layered noble barrier coating on magnesium-based alloy in chloride containing solutions

Nitrogen processed, cold sprayed commercially pure(CP)-Al coatings on Mg-based alloys mostly lack acceptable hardness, wear resistance and most importantly are highly susceptible to localized corrosion in chloride containing solutions. In this research, commercially pure α-Ti top coating having good pitting potential(~1293 mV_(SCE)), high microhardness(HV_(0.025): 263.03) and low wear rate was applied on a CP-Al coated Mg-based alloy using high pressure cold spray technology. Potentiodynamic polarization(PDP) curves indicated that the probability of transition from metastable pits to the stable pits for cold spayed(CS) Al coating is considerably higher compared to that with the CS Ti top coating(for Ti/Al/Mg system). In addition, CS Ti top coating was in the passivation region in most pH ranges even after 48 h immersion in 3.5 wt% NaCl solution. The stored energy in the CS Ti top coating(as a passive metal) was presumed to be responsible for the easy passivation. Immersion tests indicated no obvious pits formation on the intact CS Ti top coating surface and revealed effective corrosion protection performance of the CS double layered noble barrier coatings on Mg alloys in 3.5 wt% NaCl solution even after 264 h.

Separator coatings as efficient physical and chemical hosts of polysulfides for high-sulfur-loaded rechargeable lithium–sulfur batteries

Lithium-sulfur batteries(LSBs)are promising alternative energy storage devices to the commercial lithium-ion batteries.However,the LSBs have several limitations including the low electronic conductivity of sulfur(5×10^-30S cm^-1),associated lithium polysulfides(PSs),and their migration from the cathode to the anode.In this study,a separator coated with a Ketjen black(KB)/Nafion composite was used in an LSB with a sulfur loading up to 7.88 mg cm^-2to mitigate the PS migration.A minimum specific capacity(Cs)loss of 0.06%was obtained at 0.2 C-rate at a high sulfur loading of 4.39 mg cm^-2.Furthermore,an initial areal capacity up to 6.70 mAh cm^-2 was obtained at a sulfur loading of 7.88 mg cm^-2.The low Cs loss and high areal capacity associated with the high sulfur loading are attributed to the large surface area of the KB and sulfonate group(SO3^-)of Nafion,respectively,which could physically and chemically trap the PSs.

聚吡咯/SiO_2作导电助剂的水性环氧抗静电涂料的制备

以导电性聚吡咯/二氧化硅(PPy/SiO2)复合材料作导电助剂,与环氧树脂乳液混合,经聚酰胺X-650固化后,制备了电导率在10-9～10-4S·cm-1之间的水性环氧抗静电涂料。结果表明:PPy/SiO2用量为环氧乳液的2%(质量分数,下同)时,环氧涂层的电导率可从10-16S·cm-1提高到1.2×10-9S·cm-1,而且PPy/SiO2用量低于8%时,涂层具有良好的综合性能,对玻璃和马口铁附着力为1级,耐冲击性大于50cm,铅笔硬度H,耐水性和柔韧性优良。SEM观察结果表明:PPy/SiO2在环氧涂层中具有良好的分散性,且与环氧基体结合比较紧密。

Determination of Rational Staggered Distance Between Double-Longwall Faces in Mining Operation on Confined Aquifer

The influence of staggered distance on the failure of floor bed is locally and temporarily defined in double longwall mining on the confined aquifer. When the longwall mining reaches a certain scale, the deepest failure of floor bed depends on macroscopic technological parameters of mining and geological conditions. The temporary as well as the terminal failure depth does not change with the mining staggered distance (5~30 m). Based on the mining and geological conditions on the 2 635 double longwall mining panel of Yangzhuang Coal Mine, the changes of abutment pressure was observed and numerically simulated. The result shows that the rational staggered distance should be not more than 10 m.

Deep learning-based recognition of stained tongue coating images

Objective To build a dataset encompassing a large number of stained tongue coating images and process it using deep learning to automatically recognize stained tongue coating images.Methods A total of 1001 images of stained tongue coating from healthy students at Hunan University of Chinese Medicine and 1007 images of pathological(non-stained)tongue coat-ing from hospitalized patients at The First Hospital of Hunan University of Chinese Medicine withlungcancer;diabetes;andhypertensionwerecollected.Thetongueimageswererandomi-zed into the training;validation;and testing datasets in a 7:2:1 ratio.A deep learning model was constructed using the ResNet50 for recognizing stained tongue coating in the training and validation datasets.The training period was 90 epochs.The model’s performance was evaluated by its accuracy;loss curve;recall;F1 score;confusion matrix;receiver operating characteristic(ROC)curve;and precision-recall(PR)curve in the tasks of predicting stained tongue coating images in the testing dataset.The accuracy of the deep learning model was compared with that of attending physicians of traditional Chinese medicine(TCM).Results The training results showed that after 90 epochs;the model presented an excellent classification performance.The loss curve and accuracy were stable;showing no signs of overfitting.The model achieved an accuracy;recall;and F1 score of 92%;91%;and 92%;re-spectively.The confusion matrix revealed an accuracy of 92%for the model and 69%for TCM practitioners.The areas under the ROC and PR curves were 0.97 and 0.95;respectively.Conclusion The deep learning model constructed using ResNet50 can effectively recognize stained coating images with greater accuracy than visual inspection of TCM practitioners.This model has the potential to assist doctors in identifying false tongue coating and prevent-ing misdiagnosis.

微电极法测定水稻叶片液泡中硝酸根离子的再调动

作物液泡中硝酸根离子的再调动和再利用与作物氮素高效利用关系密切。利用硝酸根离子微电极技术测定了在外界继续供应和停止供应硝态氮后,不同水稻品种叶片细胞质和液泡中硝酸根离子活度在24h内的变化情况。结果表明:(1)在继续供应硝态氮后,水稻植株组织水平的硝酸根离子浓度没有显著的变化,而停止供应硝态氮的植株体内硝酸根离子浓度却有随缺氮时间延长而降低的趋势;(2)水稻叶片细胞质和液泡中硝酸根离子活度存在着明显不同的变化趋势。在停止供应硝态氮的24h内,水稻叶片液泡中的硝酸根离子浓度逐渐降低,而细胞质中的硝酸根离子却维持在一个较低的浓度且基本稳定;(3)扬稻6号液泡中和细胞质中的硝酸根离子活度均高于农垦57,且在停止供应硝态氮的不同时间段,液泡中硝酸根离子的释放速率也均高于农垦57。上述结果表明在受到硝态氮营养胁迫时,水稻先前积累在叶片液泡中的硝酸根离子可以在细胞中进行重新的利用和分配,而且籼稻品种扬稻6号对液泡硝酸根离子再调动能力显然高于粳稻农垦57。