The Performance of Downward Shortwave Radiation Products from Satellite and Reanalysis over the Transect of Zhongshan Station to Dome A, East Antarctica

The downward shortwave radiation(DSR) is an important part of the Earth's energy balance, driving Earth's system's energy, water, and carbon cycles. Due to the harsh Antarctic environment, the accuracy of DSR derived from satellite and reanalysis has not been systematically evaluated over the transect of Zhongshan station to Dome A, East Antarctica.Therefore, this study aims to evaluate DSR reanalysis products(ERA5-Land, ERA5, MERRA-2) and satellite products(CERES and ICDR) in this area. The results indicate that DSR exhibits obvious monthly and seasonal variations, with higher values in summer than in winter. The ERA5-Land(ICDR) DSR product demonstrated the highest(lowest) accuracy,as evidenced by a correlation coefficient of 0.988(0.918), a root-mean-square error of 23.919(69.383) W m^(–2), a mean bias of –1.667(–28.223) W m^(–2) and a mean absolute error of 13.37(58.99) W m^(–2). The RMSE values for the ERA5-Land reanalysis product at seven stations, namely Zhongshan, Panda 100, Panda 300, Panda 400, Taishan, Panda 1100, and Kunlun, were 30.938, 29.447, 34.507, 29.110, 20.339, 17.267, and 14.700 W m^(-2), respectively;with corresponding bias values of 9.887, –12.159, –19.181, –15.519, –8.118, 6.297, and 3.482 W m^(–2). Regarding seasonality, ERA5-Land, ERA5,and MERRA-2 reanalysis products demonstrate higher accuracies during spring and summer, while ICDR products are least accurate in autumn. Cloud cover, water vapor, total ozone, and severe weather are the main factors affecting DSR. The error of DSR products is greatest in coastal areas(particularly at the Zhongshan station) and decreases towards the inland areas of Antarctica.

World Class Elite Breaststrokers Downward Kick EMG Muscle Activity of the Gluteus Maximus, Quadriceps Femoris, Hamstring, Gastrocnemius Medialis, Rectus Abdominal, and Erector Spinae

This study analyzed the difference between using a downward breaststroke kick and a horizontal breaststroke kick in a sample of world class elite swimmers.We compared average muscle activity of the gluteus maximus,quadriceps femoris(vastus medialis and rectus femoris),hamstring/long head of the biceps femoris,gastrocnemius medialis,rectus abdominal,and erector spinae when using the downward breaststroke kick technique.We find that when this sample of swimmers utilized the downward breaststroke kick,max speed and velocity per stroke increased,measured by 12,788 EMG samples,where the results are highly correlated to duration of the aerodynamic buoyant force in breaststroke kick technique.The increases in performance observed from measuring the world class elite swimmers is highly correlated to the duration of the kick aerodynamic buoyant force.Among this sample of elite swimmers,the longer a swimmer demonstrates a buoyant force breaststroke kick,the lower the time in a 100 breaststroke.

Modeling pipe-soil interaction under vertical downward relative offset using B-spline material point method

To analyze the pipeline response under permanent ground deformation,the evolution of resistance acting on the pipe during the vertical downward offset is an essential ingredient.However,the efficient simulation of pipe penetration into soil is challenging for the conventional finite element(FE)method due to the large deformation of the surrounding soils.In this study,the B-spline material point method(MPM)is employed to investigate the pipe-soil interaction during the downward movement of rigid pipes buried in medium and dense sand.To describe the density-and stress-dependent behaviors of sand,the J2-deformation type model with state-dependent dilatancy is adopted.The effectiveness of the model is demonstrated by element tests and biaxial compression tests.Afterwards,the pipe penetration process is simulated,and the numerical outcomes are compared with the physical model tests.The effects of pipe size and burial depth are investigated with an emphasis on the mobilization of the soil resistance and the failure mechanisms.The simulation results indicate that the bearing capacity formulas given in the guidelines can provide essentially reasonable estimates for the ultimate force acting on buried pipes,and the recommended value of yield displacement may be underestimated to a certain extent.

An Uncertainty Analysis of Downward Pressure Applied to the Wafer Based on a Flexible Airbag by a Double Side Polishing Machine

The process of wafer polishing is known to be highly demanding,and even small deviations in the processing parameters can have a significant impact on the quality of the wafers obtained.During the process of wafer polishing,maintaining a constant pressure value applied by the polishing head is essential to achieve the desired flatness of the wafer.The accuracy of the downward pressure output by the polishing head is a crucial factor in producing flat wafers.In this paper,the uncertainty component of downward pressure is calculated and its measurement uncertainty is evaluated,and a method for calculating downward pressure uncertainty traceable to international basic unit is established.Therefore,the reliability of double side polishing machine has been significantly improved.

As the textile industry chain moves outward, the economic operation of the textile machinery industry faces downward pressure

Faced with the impact of complex and changeable domestic and international situations and multiple factors exceeding expectations,China's textile industry has experienced weak market demand,high raw material cost,more complex trade environment and significantly increased economic operating pressure since 2022.The growth rate of main economic indicators of the textile machinery industry continues to weaken,and the economic operation faces great downward pressure.

Downward shift of gas hydrate stability zone due to seafloor erosion in the eastern Dongsha Island,South China Sea

New acquired and reprocessed three-dimensional(3D)seismic data were used to delineate the distribution and characterization of bottom simulating reflections(BSRs)in the Chaoshan Sag,in the eastern part of Dongsha Island,South China Sea.Three submarine canyons with different scales were interpreted from the 3D seismic data,displaying three stages of canyon development and are related with the variation of BSR.Abundant faults were identified from the coherence and ant-tracing attributions extracted from 3D seismic data,which provide the evidence for fluid migration from deeper sediments to the gas hydrate stability zone(GHSZ).The uplift of Dongsha Island created a large number of faults and leads to the increased seafloor erosion.The erosion caused the cooling of the seafloor sediments and deepening of the base of the gas hydrate stability zone,which is attributed to the presence of paleo-BSR and BSR downward shift in the study area.Hence,methane gas may be released during the BSR resetting and gas hydrate dissociation related with seafloor erosion.

Experimental Investigation on Flow and Scour Characteristics Around Tandem Piers in Sandy Channel With Downward Seepage

Experimental investigations have been carried out to study morpho-hydraulic characteristics such as scour geometry and turbulent flow properties around tandem piers in alluvial channels. Experiments were carried out in a plane sand bed with two circular piers of same diameter arranged in tandem manner under no seepage, 10% seepage and 20% seepage conditions. Downward seepage minimizes the scour depth around piers and restrains the development of scour depth with time. Strong reversal flow is found near the bed at upstream of piers and near free surface at downstream of piers where velocity and Reynolds shear stress are found to be negative which reduce in magnitude with downward seepage. The flow is more critical within the gap between two piers where velocity is lesser near free surface and gradually increasing towards bed. Quadrant analysis shows that contribution of each event to the total Reynolds shear stress increases with downward seepage. Sedimentation effect prevails within the scour hole whereas outside the scour hole erosive forces become more dominant. Reduced reversal flow at upstream of pier because of downward seepage results in decreasing higher order moments and turbulent kinetic energy. At downstream of piers, secondary currents are dominant due to wake vortices. Strouhal number decreases in case of seepage runs than no seepage condition.

Effect of Downward Seepage on Turbulent Flow Characteristics and Bed Morphology around Bridge Piers

In this work, experimental investigations have been pursued to analyse the influence of downward seepage on the turbulent characteristics of flow and corresponding changes in vortex structure around circular bridge pier in alluvial channel. Experiments were conducted in sand bed channel with circular piers of different sizes for no seepage, 10% seepage and 20% seepage cases. The measurement of turbulent flow statistics such as velocity and Reynolds stresses is found to be negative within the scour hole at upstream of the pier whereas application of downward seepage retards the reversal of the flow causing a decrement in the velocity and Reynolds stresses. Higher Reynolds shear stress prevails at the downstream side because of the production of wake vortices. Contribution of all bursting events to the total Reynolds shear stress production has been observed to increase with downward seepage. The analysis of integral scale suggest that size of eddies increases with seepage, which is responsible for increase in particle mobility. Initially rate of scouring is more which abatements gradually with expanding time as well as with the increased of downward seepage. Presence of downward seepage reduces the depth and length of vortex and shifts towards downstream side of the pier.

Validation of Global Land Surface Satellite (GLASS) Downward Shortwave Radiation Product in the Rugged Surface

The downward shortwave radiation(DSR) is an essential parameter of land surface radiation budget and many land surface models that characterize hydrological,ecological and biogeochemical processes.The new Global LAnd Surface Satellite(GLASS) DSR datasets have been generated recently using multiple satellite data in China.This study investigates the performances of direct comparison approach,which is mostly used for validation of surface insolation retrieved from satellite data over the plain area,and indirect comparison approach,which needs a fine resolution map of DSR as reference,for validation of GLASS DSR product in time-steps of 1 and 3 hours over three Chinese Ecosystem Research Network sites located in the rugged surface.Results suggest that it probably has a large uncertainty to assess GLASS DSR product using the direct comparison method between GLASS surface insolation and field measurements over complex terrain,especially at Mt.Gongga 3,000 m station with root mean square error of 279.04 and 229.06 W/m2in time-steps of 1 and 3 hours,respectively.Further improvement for validation of GLASS DSR product in the rugged surface is suggested by generation of a fine resolution map of surface insolation and comparison of the aggregated fine resolution map with GLASS product in the rugged surface.The validation experience demonstrates that the GLASS DSR algorithm is satisfactory with determination coefficient of 0.83 and root mean square error of 81.91W/m2over three Chinese Ecosystem Research Network sites,although GLASS product overestimates DSR compared to the aggregated fine resolution map of surface insolation.

Role of Downward Momentum Transport in the Formation of Severe Surface Winds

The Weather Research and Forecasting (WRF) model was used to investigate the role of downward momentum transport in the formation of severe surface winds for a squall line on 3-4 June 2009 across regions of the Henan and Shandong Provinces of China. The results show that there was a strong westerly jet belt with a wind speed greater than 30 m s 1 and a thickness of 5 km at an altitude of 11-16 km. The jet belt was accelerated, and it descended while the squall line convective system occurred. It was found that the appearance of strong negative perturbation pressure accompanied by the squall line caused the acceleration of the upper-level westerly jet and increased the horizontal wind speed by a maximum of 18%. Meanwhile, the negative buoyancy due to the loading, melting, and evaporation of cloud hydrometeors induced the downward momentum transport from the upper levels. The downward momentum transport contributed approximately 70% and the surface cold pool 30% to the formation of severe surface winds.

Downward continuation of airborne geomagnetic data based on two iterative regularization methods in the frequency domain

Downward continuation is a key step in processing airborne geomagnetic data. However,downward continuation is a typically ill-posed problem because its computation is unstable; thus, regularization methods are needed to realize effective continuation. According to the Poisson integral plane approximate relationship between observation and continuation data, the computation formulae combined with the fast Fourier transform（FFT）algorithm are transformed to a frequency domain for accelerating the computational speed. The iterative Tikhonov regularization method and the iterative Landweber regularization method are used in this paper to overcome instability and improve the precision of the results. The availability of these two iterative regularization methods in the frequency domain is validated by simulated geomagnetic data, and the continuation results show good precision.

DOWNWARD LOOKING SPARSE LINEAR ARRAY 3D SAR IMAGING ALGORITHM BASED ON BACK-PROJECTION AND CONVEX OPTIMIZATION

Downward Looking Sparse Linear Array Three Dimensional SAR(DLSLA 3D SAR) is an important form of 3D SAR imaging, which has a widespread application field. Since its practical equivalent phase centers are usually distributed sparsely and nonuniformly, traditional 3D SAR algorithms suffer from low resolution and high sidelobes in cross-track dimension. To deal with this problem, this paper introduces a method based on back-projection and convex optimization to achieve 3D high accuracy imaging reconstruction. Compared with traditional SAR algorithms, the proposed method sufficiently utilizes the sparsity of the 3D SAR imaging scene and can achieve lower sidelobes and higher resolution in cross-track dimension. In the simulated experiments, the reconstructed results of both simple and complex imaging scene verify that the proposed method outperforms 3D back-projection algorithm and shows satisfying cross-track dimensional resolution and good robustness to noise.

High-precision downward continuation of potential fi elds algorithm utilizing adaptive damping coeffi cient of generalized minimal residuals

The downward continuation of potential fields is a process of calculating their values in a lower plane based on those of a certain plane.This technology is not only a data processing method for resource exploration but also plays an extremely important role in military applications.However,the downward continuation of potential fields is a typical linear inverse problem that is ill-posed.Generalized minimal residuals(GMRES)is an eff ective solution to ill-posed inverse problems,but it is unstable under the condition wherein the GMRES is directly applied in the calculation process.Moreover,the long-term behavior of its iterative computation is a disordered,divergent result.Therefore,to obtain stable solutions,GMRES is applied to solve the normal equations of the downward continuation of potential fields;it is also used to prequalify for occasional interruptions in the operation process by adding the damping coefficient,thus strengthening the stability conditions of the equations of residual minimization.Finally,the stable downward continuation of the potential fields method is proposed.As indicated by the theoretical data and the measured testing data,the method proposed in this paper has the advantages of high-precision and excellent stability.Furthermore,compared with the Tikhonov iteration method,the proposed method avoids the need to choose regularization parameters.

Control strategy of disc braking systems for downward belt conveyors

Reliability of braking systems is a key requirement to ensure the safety of in using downward belt conveyor brakes. By analyzing and comparing three commonly used braking velocity curves, we conclude that the Harrison curve is the best. Given the characteristics of a downward belt conveyor, we studied the control in a closed-loop velocity, a conventional PID method and an optimal PID control method. We used MATLAB/Simulink to simulate the three control methods. Our simulation results show that opti- mal PID control is especially suitable for disc braking systems. To verif!/the results from theoretical anal- ysis and simulation, a multifunctional test-bed was developed to simulate the braking process of a disc brake system. Our experimental results demonstrate that the optimal PID control can make the output velocity to follow a preset velocity correctly with only small fluctuations, meeting the requirements of a flexible brake for a belt conveyor.

Downward continuation of airborne gravimetry data based on Poisson integral iteration method

The research and application of airborne gravimetry technology has become one of the hottest topics in gravity field in recent years. Downward continuation is one of the key steps in airborne gravimetry data processing, and the quality of continuation results directly influence the further application of surveying data. The Poisson integral iteration method is proposed in this paper, and the modified Poisson integral discretization formulae are also introduced in the downward continuation of airborne gravimerty data. For the test area in this paper, compared with traditional Poisson integral discretization formula, the continuation result of modified formulae is improved by 10.8 mGal, and the precision of Poisson integral iteration method is in the same amplitude as modified formulae. So the Poisson integral iteration method can reduce the discretization error of Poisson integral formula effectively. Therefore, the research achievements in this paper can be applied directly in the data processing of our country＇s airborne scalar and vector gravimetry.

Theoretical Analysis of Retrieving Atmospheric Columnar Mie Optical Depth from Downward Total Solar Radiative Flux

In this paper, the principle to determine the atmospheric columnar Mie optical depth from downward total solar radiative flux is theoretically studied, and the effect on Mie optical depth solution of the errors in surface albedo, sin-gle scattering albedo, asymmetrical factor of scattering phase function, instrumental constant and the approximate expression of diffusion flux is analy/ed, and then a method for determining surface albedo in shorter wavelength range is presented.

Study on Fracture Characteristic of Artificial Roof of Downward Drift with High-Water Solidifying Backfill

On the basis of analysis of the structure aud loading characteristic of downward drift with high-water solidifying backfill, the fracture characteristics of the artiricial roof of "hard-support weak-plate" drift and "soft-support weak-plate" drift are demonstrated rrom theory. The location and the maximum tensile stress of destruction point are given.This paper aims at providing some theoretical basis and practical reference for designing the artificlal roof structure parameter in downward drirt backfill mining.

Downward continuation of aeromagnetic data to the marine surface

The existing methods of downward continuation of potential field cannot be used to continue the aeromagnetic data to the marine surface because of the limited continuation distance. An iteration method for the downward continuation of potential field with a much larger continuation distance has been developed, which can continue the aeromagnetic data to the marine surface and get the marine - magnetic chart with the same scale as the aeromagnetic data. This downward continuation method will greatly raise the ef- ficiency of marine - magnetic investigation. The principle of the iteration method is presented. The method is demonstrated on synthetic models and real aeromagnetic data. Also, the error brought by continuation is discussed. The efficiency of the iteration method for the downward continuation of potential field is compared with the fast fourier transform （FFT） method, the former is much better than the latter.

BEST APPROXIMATION BY DOWNWARD SETS WITH APPLICATIONS

We develop a theory of downward sets for a class of normed ordered spaces. We study best approximation in a normed ordered space X by elements of downward sets, and give necessary and sufficient conditions for any element of best approximation by a closed downward subset of X. We also characterize strictly downward subsets of X, and prove that a downward subset of X is strictly downward if and only if each its boundary point is Chebyshev. The results obtained are used for examination of some Chebyshev pairs （W,x）, where ∈ X and W is a closed downward subset of X

Gravity Field Imaging by Continued Fraction Downward Continuation: A Case Study of the Nechako Basin(Canada)

Interpretation of gravity data plays an important role in the study of geologic structure and resource exploration in the deep part of the earth,like the lower crust,the upper mantle(Lüet al.,2013,2019).The gravity anomaly reflects the lateral resolution of the underground mass distribution.