基于Drucker-Prager屈服准则及加卸载判据的圆形隧道围岩-支护作用机制探讨

隧道围岩-支护相互作用机制是隧道力学中的基础理论,为了准确描述围岩与支护结构对隧道应力变形的影响,假定围岩本构模型为理想弹塑性模型,采用适用于岩土材料的Drucker-Prager屈服准则,考虑加卸载判据,证明了圆形隧道的开挖过程是一个加载过程,支护过程是卸载过程。通过大型有限元仿真软件Abaqus计算了平面应变情况下圆形隧道开挖与支护过程的弹塑性解。数值分析结果与理论公式结果相吻合,表明开挖的过程是解除内压、增大压差的加载过程,支护过程为施加内压、减小压差的卸载过程。支护后的围岩应力增量和位移增量符合弹性规律,且支护过后的应力等于开挖后的应力减去弹性应力。支护过程的卸载效应使得开挖过程产生的塑性区变成了残余变形区。研究结果可为工程应用提供参考。

基于Drucker-Prager/Cap模型的Ti-30Cu粉末轧制过程模拟

对钛和铜质量比为7∶3的Ti-30Cu混合粉末进行单轴压缩、巴西圆盘和模压试验,获得该粉末Drucker-Prager/Cap本构参数与相对密度的关系;利用Abaqus软件建立粉末轧制模型,研究喂料高度对板料相对密度的影响,并进行了试验验证;采用该模型研究了辊缝宽度、轧速对Ti-30Cu合金板料相对密度的影响。结果表明:在辊缝宽度为1 mm、轧速为10 mm·s^(-1)条件下,随着喂料高度由150 mm增加到300 mm,板料的相对密度增大,模拟结果与试验结果基本吻合,最大相对误差为2.15%,验证了轧制模型的有效性;随着喂料高度的增加、辊缝宽度或轧速的减小,板料的相对密度增大。

DRUCKER-PRAGER YIELD CRITERIA IN VISCOELASTIC-PLASTIC CONSTITUTIVE MODEL FOR THE STUDY OF SEA ICE DYNAMICS

Based on the characteristics of sea ice drifting and ridging at meso-small scale, the Drucker-Prager （D-P） yield criteria was introduced into the Viscoelastic-Plastic （VEP） constitutive model for the study of sea ice dynamics. In this model, the Kelvin-Vogit viscoelastic model was adopted in the elastic stage, and the associated normal flow rule was used in the plastic stage. Using the VEP model, the sea ice ridging process was simulated in an idealized rectangular basin, and the simulation results show that the simulated ice ridge thickness is consistent with the analytical solution. Moreover, the VEP model with the D-P yield criteria was also applied for the sea ice simulation of Bohai Sea, and the ice thickness, concentration, velocity, and ice stress were obtained in 48 h. The simulated thickness distributions agree well with the satellite images. The singular problem in the Mohr^7oulomb （M-C） yield criteria was overcome by the D-P yield criteria, and the computational efficiency was also improved. In the numerical simulations described above, the smoothed particle hydrodynamics was applied.

FRP约束混凝土柱的修正Drucker-Prager模型

Drucker-Prager(DP)模型中,摩擦角和内聚力相关的参数决定屈服、硬化软化准则,与膨胀角相关的参数决定流动法则。通过对试验样本数据的分析,确定了摩擦角的影响因素,将摩擦角定义为塑性应变的函数;进而由DP模型的屈服准则更新了内聚力模型。通过计算侧向塑性应变与轴向塑性应变的比率,建立了考虑约束刚度比的膨胀角模型。基于ABAQUS中的USDFLD子程序对修正后DP模型参数实现自定义,结果表明提出的修正后的DP模型可以很好地预测FRP约束混凝土柱的应力-应变响应,具有一定的精度。

Winter wheat yield improvement by genetic gain across different provinces in China

The replacement of winter wheat varieties has contributed significantly to yield improvement worldwide,with remarkable progress in China.Drawing on two sets of data,production yield from the National Bureau of Statistics of China and experimental yield from literature,this study aims to(1)illustrate the increasing patterns of production yield among different provinces from 1978 to 2018 in China,(2)explore the genetic gain in yield and yield relevant traits through the variety replacement based on experimental yield from 1937 to 2016 in China,and(3)compare the yield gap between experimental yield and production yield.The results show that both the production and experimental yields significantly increased along with the variety replacement.The national annual yield increase ratio for the production yield was 1.67%from 1978 to 2018,varying from 0.96%in Sichuan Province to 2.78%in Hebei Province;such ratio for the experimental yield was 1.13%from 1937 to 2016.The yield gap between experimental and production yields decreased from the 1970s to the 2010s.This study reveals significant increases in some yield components consequent to variety replacement,including thousand-grain weight,kernel number per spike,and grain number per square meter;however,no change is shown in spike number per square meter.The biomass and harvest index consistently and significantly increased,whereas the plant height decreased significantly.

The underlying mechanism of variety–water–nitrogen–stubble damage interactions on yield formation in ratoon rice with low stubble height under mechanized harvesting

Agronomic measures are the key to promote the sustainable development of ratoon rice by reducing the damage from mechanical crushing to the residual stubble of the main crop, thereby mitigating the impact on axillary bud sprouting and yield formation in ratoon rice. This study used widely recommended conventional rice Jiafuzhan and hybrid rice Yongyou 2640 as the test materials to conduct a four-factor block design field experiment in a greenhouse of the experimental farm of Fujian Agricultural and Forestry University, China from 2018 to 2019.The treatments included fertilization and no fertilization, alternate wetting and drying irrigation and continuous water flooding irrigation, and plots with and without artificial crushing damage on the rice stubble. At the same time, a 13C stable isotope in-situ detection technology was used to fertilize the pot experiment. The results showed significant interactions among varieties, water management, nitrogen application and stubble status.Relative to the long-term water flooding treatment, the treatment with sequential application of nitrogen fertilizer coupled with moderate field drought for root-vigor and tiller promotion before and after harvesting of the main crop, significantly improved the effective tillers from low position nodes. This in turn increased the effective panicles per plant and grains per panicle by reducing the influence of artificial crushing damage on rice stubble and achieving a high yield of the regenerated rice. Furthermore, the partitioning of 13C assimilates to the residual stubble and its axillary buds were significantly improved at the mature stage of the main crop, while the translocation rate to roots and rhizosphere soil was reduced at the later growth stage of ratooning season rice. This was triggered by the metabolism of hormones and polyamines at the stem base regulated by the interaction of water and fertilizer at this time. We therefore suggest that to achieve a high yield of ratoon rice with low stubble height under mechanized harvesting, the timely application of nitrogen fertilizer is fundamental,coupled with moderate field drying for root-vigor preservation and tiller promotion before and after the mechanical harvesting of the main crop.

Exogenous melatonin improves cotton yield under drought stress by enhancing root development and reducing root damage

The exogenous application of melatonin by the root drenching method is an effective way to improve crop drought resistance.However,the optimal concentration of melatonin by root drenching and the physiological mechanisms underlying melatonin-induced drought tolerance in cotton(Gossypium hirsutum L.)roots remain elusive.This study determined the optimal concentration of melatonin by root drenching and explored the protective effects of melatonin on cotton roots.The results showed that 50μmol L-1 melatonin was optimal and significantly mitigated the inhibitory effect of drought on cotton seedling growth.Exogenous melatonin promoted root development in drought-stressed cotton plants by remarkably increasing the root length,projected area,surface area,volume,diameter,and biomass.Melatonin also mitigated the drought-weakened photosynthetic capacity of cotton and regulated the endogenous hormone contents by regulating the relative expression levels of hormone-synthesis genes under drought stress.Melatonin-treated cotton seedlings maintained optimal enzymatic and non-enzymatic antioxidant capacities,and produced relatively lower levels of reactive oxygen species and malondialdehyde,thus reducing the drought stress damage to cotton roots(such as mitochondrial damage).Moreover,melatonin alleviated the yield and fiber length declines caused by drought stress.Taken together,these findings show that root drenching with exogenous melatonin increases the cotton yield by enhancing root development and reducing the root damage induced by drought stress.In summary,these results provide a foundation for the application of melatonin in the field by the root drenching method.

Grain yield and N uptake of maize in response to increased plant density under reduced water and nitrogen supply conditions

The development of modern agriculture requires the reduction of water and chemical N fertilizer inputs.Increasing the planting density can maintain higher yields,but also consumes more of these restrictive resources.However,whether an increased maize density can compensate for the negative effects of reduced water and N supply on grain yield and N uptake in the arid irrigated areas remains unknown.This study is part of a long-term positioning trial that started in 2016.A split-split plot field experiment of maize was implemented in the arid irrigated area of northwestern China in 2020 to 2021.The treatments included two irrigation levels:local conventional irrigation reduced by 20%(W1,3,240 m^(3)ha^(-1))and local conventional irrigation(W2,4,050 m^(3)ha^(-1));two N application rates:local conventional N reduced by 25%(N1,270 kg ha^(-1))and local conventional N(360 kg ha^(-1));and three planting densities:local conventional density(D1,75,000 plants ha^(-1)),density increased by 30%(D2,97,500 plants ha-1),and density increased by 60%(D3,120,000 plants ha^(-1)).Our results showed that the grain yield and aboveground N accumulation of maize were lower under the reduced water and N inputs,but increasing the maize density by 30% can compensate for the reductions of grain yield and aboveground N accumulation caused by the reduced water and N supply.When water was reduced while the N application rate remained unchanged,increasing the planting density by 30% enhanced grain yield by 13.9% and aboveground N accumulation by 15.3%.Under reduced water and N inputs,increasing the maize density by 30% enhanced N uptake efficiency and N partial factor productivity,and it also compensated for the N harvest index and N metabolic related enzyme activities.Compared with W2N2D1,the N uptake efficiency and N partial factor productivity increased by 28.6 and 17.6%under W1N1D2.W1N2D2 had 8.4% higher N uptake efficiency and 13.9% higher N partial factor productivity than W2N2D1.W1N2D2 improved urease activity and nitrate reductase activity by 5.4% at the R2(blister)stage and 19.6% at the V6(6th leaf)stage,and increased net income and the benefit:cost ratio by 22.1 and 16.7%,respectively.W1N1D2 and W1N2D2 reduced the nitrate nitrogen and ammoniacal nitrogen contents at the R6 stage in the 40-100 cm soil layer,compared with W2N2D1.In summary,increasing the planting density by 30% can compensate for the loss of grain yield and aboveground N accumulation under reduced water and N inputs.Meanwhile,increasing the maize density by 30% improved grain yield and aboveground N accumulation when water was reduced by 20% while the N application rate remained constant in arid irrigation areas.

Manure substitution improves maize yield by promoting soil fertility and mediating the microbial community in lime concretion black soil

Synthetic nitrogen(N)fertilizer has made a great contribution to the improvement of soil fertility and productivity,but excessive application of synthetic N fertilizer may cause agroecosystem risks,such as soil acidification,groundwater contamination and biodiversity reduction.Meanwhile,organic substitution has received increasing attention for its ecologically and environmentally friendly and productivity benefits.However,the linkages between manure substitution,crop yield and the underlying microbial mechanisms remain uncertain.To bridge this gap,a three-year field experiment was conducted with five fertilization regimes:i)Control,non-fertilization;CF,conventional synthetic fertilizer application;CF_(1/2)M_(1/2),1/2 N input via synthetic fertilizer and 1/2 N input via manure;CF_(1/4)M_(3/4),1/4 N input synthetic fertilizer and 3/4 N input via manure;M,manure application.All fertilization treatments were designed to have equal N input.Our results showed that all manure substituted treatments achieved high soil fertility indexes(SFI)and productivities by increasing the soil organic carbon(SOC),total N(TN)and available phosphorus(AP)concentrations,and by altering the bacterial community diversity and composition compared with CF.SOC,AP,and the soil C:N ratio were mainly responsible for microbial community variations.The co-occurrence network revealed that SOC and AP had strong positive associations with Rhodospirillales and Burkholderiales,while TN and C:N ratio had positive and negative associations with Micromonosporaceae,respectively.These specific taxa are implicated in soil macroelement turnover.Random Forest analysis predicted that both biotic(bacterial composition and Micromonosporaceae)and abiotic(AP,SOC,SFI,and TN)factors had significant effects on crop yield.The present work strengthens our understanding of the effects of manure substitution on crop yield and provides theoretical support for optimizing fertilization strategies.

Finite Element Implementation of the Exponential Drucker-Prager Plasticity Model for Adhesive Joints

This paper deals with the numerical implementation of the exponential Drucker-Parger plasticitymodel in the commercial finite element software,ABAQUS,via user subroutine UMAT for adhesive joint simulations.The influence of hydrostatic pressure on adhesive strength was investigated by a modified Arcan fixture designed particularly to induce a different state of hydrostatic pressure within an adhesive layer.The developed user subroutine UMAT,which utilizes an associated plastic flow during a plastic deformation,can provide a good agreement between the simulations and the experimental data.Better numerical stability at highly positive hydrostatic pressure loads for a very high order of exponential function can also be achieved compared to when a non-associated flow is used.

Yields,growth and water use under chemical topping in relations to row configuration and plant density in drip-irrigated cotton

Background Water deficit is an important problem in agricultural production in arid regions.With the advent of wholly mechanized technology for cotton planting in Xinjiang,it is important to determine which planting mode could achieve high yield,fiber quality and water use efficiency(WUE).This study aimed to explore if chemical topping affected cotton yield,quality and water use in relation to row configuration and plant densities.Results Experiments were carried out in Xinjiang China,in 2020 and 2021 with two topping method,manual topping and chemical topping,two plant densities,low and high,and two row configurations,i.e.,76 cm equal rows and 10+66 cm narrow-wide rows,which were commonly applied in matching harvest machine.Chemical topping increased seed cotton yield,but did not affect cotton fiber quality comparing to traditional manual topping.Under equal row spacing,the WUE in higher density was 62.4%higher than in the lower one.However,under narrow-wide row spacing,the WUE in lower density was 53.3%higher than in higher one(farmers’practice).For machine-harvest cotton in Xinjiang,the optimal row configuration and plant density for chemical topping was narrow-wide rows with 15 plants m-2 or equal rows with 18 plants m-2.Conclusion The plant density recommended in narrow-wide rows was less than farmers’practice and the density in equal rows was moderate with local practice.Our results provide new knowledge on optimizing agronomic managements of machine-harvested cotton for both high yield and water efficient.

Cause of Errors Associated with Application of Drucker-Prager Yield Criterion in MSC/NASTRAN Program

When the Drucker Prager yield criterion is used, the MSC/NASTRAN program frequently predicts noticeable errors. The relevant part of NASTRAN Handbook was checked and some errors in the elasto plastics theory used in NASTRAN were detected in this paper. The procurement to prove these errors was verified by numerical calculation.

Effect of Inorganic and Organic Fertilizers on Growth and Yield of Two Industrial Potato Varieties (Asterix and Courage) in Bangladesh

Potato is one of the most important vegetable crops, which contributes more than half of the total vegetable production in Bangladesh. Four field experiments were conducted in two different locations in Bangladesh to develop integrated nutrient management practices to produce quality potato seed in industrial processing varieties Asterix and Courage. For the inorganic trial, Factorial Randomized Complete Block Design (RCBD) including 2 potato varieties, 5 treatments with 4 replications, and in the organic fertilizer trial, Factorial RCBD including 2 potato varieties, 6 treatments with 4 replications were used. In the inorganic fertilizer trail, the highest yield was obtained in the variety Asterix due to Nitrogen, Phosphorus, Potassium, and Sulfur (NPKS) plus Magnesium treated plot in Domar BADC farm and due to NPKS plus Boron, Zinc, and Magnesium treated plots in Kashimpur Farm. In the case of variety Courage, the highest yield was found in the treatment of NPKS plus Zinc in Domar BADC farm while in Kashimpur farm, NPKS plus Mg treated plots had the highest yield of potato variety-Courage. In the organic fertilizer trail, the highest tuber yield per hill was obtained by applying the government-approved commercial brand Northern organic fertilizer in variety Asterix and by organic fertilizer brand Chook Chook in variety Courage. Parameters such as days to tuber initiation, number of stems per hill, plant height, and number of tubers per hill were found statistically different among the treatments and between the two varieties. Treatments namely Northern organic fertilizer and Cowdung combined with mustard oil cake performed better considering standard grade tuber yield (grade A and B) compared to other treatments. Hence, the combination of NPKS MgZn and either Northern organic or Chook Chook or Cowdung plus mustard oil cake could be used to grow the varieties Asterix and Courage.

Effect of Planting Date on Yield and Yield Components of Grain Sorghum Hybrids

In Kansas, productivity of grain sorghum [Sorghum bicolor (L.) Moench] is affected by weather conditions at planting and during pollination. Planting date management and selection of hybrid maturity group can help to avoid severe environmental stresses during these sensitive stages. The hypothesis of the study was that late May planting improves grain sorghum yield and yield components compared with late June planting. The objectives of this research were to investigate the influence of planting dates yield and yield components of different grain sorghum hybrids, and to determine the optimal planting date and hybrid combination for maximum biomass and grains production. Three sorghum hybrids (early, medium, and late maturing) were planted in late May and late June without irrigation in Kansas at Manhattan/Ashland Bottom Research Station, and Hutchinson in 2010;and at Manhattan/North Farm and Hutchinson in 2011. Data on dry matter production, yield and yield components were collected. Grain yield and yield components were influenced by planting date depending on environmental conditions. At Manhattan (2010), greater grain yield, number of heads per plant, were obtained with late-June planting compared with late May planting, while at Hutchinson (2010) greater yield was obtained with late May planting for all hybrids. The yield component most affected at Hutchinson was the number of kernels∙panicle−1 and plant density. Late-May planting was favorable for late maturing hybrid (P84G62) in all locations. However, the yield of early maturing hybrid (DKS 28-05) and medium maturing hybrid (DKS 37-07) was less affected by delayed planting. The effects of planting dates on yield and yield components of grain sorghum hybrids were found to be variable among hybrid maturity groups and locations.

The Yield and Diseases-Pest Performance of Breeding Materials for Tomatoes (Lycopersicon esculentum) Sourced from Different Exotic Sources

A study was conducted with 36 tomato germplasm [PGRC (19), The Netherlands (7), Japan (2), and Bangladesh (9)] with 3 check varieties in the research field of the Olericulture Division of Horticulture Research Centre (HRC), Bangladesh Agricultural Research Institute (BARI), Gazipur during the winter season of 2022-23 to identify promising tomato breeding germplasm. All the germplasm showed differences in most of the parameters studied. Considerable variation was observed for fruit yield per hectare varied from 39 to 144 tons, while the highest fruit yield per hectare was harvested from the germplasm viz., BD 7759B, BD 7757, BD 7751, BD 7301, QM, BD 7759A, BD 7762, QF, BD 7753, BD 8886, BD 10351, NL-1A, SLA-19. The number of locules, total soluble solids (TSS) and plant height at last harvest varied from 2 to 6.6, 2.6 to 5.9%, and 66 to 154cm, respectively. The TYLCV infection (%) and leaf-sucking pest infestation (%) were observed with a 1 to 20% range in the field condition in both cases. So, we can select that germplasm has zero per cent infestation. Considering the plant growth habit, earliness, different yield contributing horticultural traits, virus and pest infestation thirteen germplasm viz., BD 7759B, BD 7757, BD 7751, BD 7301, QM, BD 7759A, BD 7762, QF, BD 7753, BD 8886, BD 10351, NL-1A, SLA-19 were selected as breeding materials for further tomato improvement program.

Salinity Stress Deteriorates Grain Yield and Increases 2-Acetyl-1-Pyrroline Content in Rice

Salinity stress greatly impacts rice grain yield and quality, as well as the 2-acetyl-1-pyrroline(2-AP) content in grains. The present study was conducted with Nanjing 9108(NJ9108, conventional japonica rice) and Wenliangyou 669(WLY669, indica hybrid rice) in the fields with non-salinity(NS), low salinity(LS), and high salinity(HS) stresses in 2021 and 2022.

Yield and Nutritive Values of Semi- and Non-Fall Dormant Alfalfa Cultivars under Late-Cutting Schedule in California’s Central Valley

California is one of the major alfalfa (Medicago sativa L) forage-producing states in the U.S, but its production area has decreased significantly in the last couple of decades. Selection of cultivars with high yield and nutritive value under late-cutting schedule strategy may help identify cultivars that growers can use to maximize yield while maintaining area for sustainable alfalfa production, but there is little information on this strategy. A field study was conducted to determine cumulative dry matter (DM) and nutritive values of 20 semi- and non-fall dormant (FD) ratings (FD 7 and FD 8 - 10, respectively) cultivars under 35-day cut in California’s Central Valley in 2020-2022. Seasonal cumulative DM yields ranged from 6.8 in 2020 to 37.0 Mg·ha−1 in 2021. Four FD 8 - 9 cultivars were the highest yielding with 3-yrs avg. DM greater than the lowest yielding lines by 46%. FD 7 cultivar “715RR” produced the highest crude protein (CP: 240 g·Kg−1) while FD 8 cultivar “HVX840RR” resulted in the highest neutral detergent fiber digestibility (NDFD: 484 g·Kg−1, 7% greater than the top yielding cultivars) but with DM yield intermediate. Yields and NDFD correlated positively but weakly indicating some semi- and non-FD cultivars performing similarly. These results suggest that selecting high yielding cultivars under 35-day cutting schedule strategy can be used as a tool to help growers to maximize yield while achieving good quality forages for sustainable alfalfa production in California’s Central Valley.

Effect of Different Mulch Materials on Yield and Nutrition Profile of Common Capsicum (Capsicum annuum) Cultivars in Bangladesh

Capsicum is a nutritious vegetable and its cultivation in farms is getting popular in Bangladesh. Although many efforts have lain to explore better yielding and nutritionally rich cultivars with suitable modern cultivation techniques but still have to find the desired outcome. Thus, it’s necessary to conduct further research to identify the high-yielding and nutritious capsicum cultivars in Bangladesh. An experiment was conducted from July 2021 to June 2022 at the Bangladesh Institute of Research and Training on Applied Nutrition (BIRTAN) research field with three cultivars of capsicum: B0 = California Wonder, B1 = BARI Misti Morich-1 and B2 = BARI Misti Morich-2 and three mulching: T0 = No mulching, T1 = Water hyacinth, T2 = Poly Mulching in randomized complete block design with three replications to identify better quality capsicum cultivar and suitable mulching material. Among cultivars the BARI Misti Morich-2 (B2) showed increased agronomic parameters like number of branches and effective branches per plant, leaves length and width, consequently yield and yield contributing traits were also enhanced like fruits per plant, fruit length, fruit diameter and yield per plant (25.97%, 4.54%, 3.64% and 21.43%, respectively). Poly Mulching (T2) increased agronomic traits, yield traits and yield (0.61 kg) than BARI Misti Morich-1 (T1). The combined effect of B2T2 increased the number of branches per plant, effective branches per plant, leaves length and breadth by 40%, 90%, 15.57% and 26.22%, respectively, hence resulting in an increased yield of 20%. BARI Misti Morich-2 cultivar showed an increase in Fe, Zn and Vitamin-C content of 26.24% and 23.10%, 8.82% and 5.14%, and 6.03% and 5.74% than B0 and B1 cultivars, respectively. Therefore, BARI Misti Morich-2 exhibited the improved agronomic, yield and nutritional traits of capsicum under poly mulching among other cultivars in Bangladesh.

Genetic and Agronomic Parameter Estimates of Growth, Yield and Related Traits of Maize (Zea mays L.) under Different Rates of Nitrogen Fertilization

This study evaluated the genetic and agronomic parameter estimates of maize under different nitrogen rates. The trial was established at the Njala Agricultural Research Centre experimental site during 2021 and 2022 in a split block design with three maize varieties (IWCD2, 2009EVDT, and DMR-ESR-Yellow) and seven nitrogen (0, 30, 60, 90, 120, 150 and 180 kg∙N∙ha−1) rates. Findings showed that cob diameter and anthesis silking time (ASI) had intermediate heritability, ASI had high genetic advance, ASI and grain yield had high genotypic coefficient of variation (GCV), while traits with high phenotypic coefficient of variation (PCV) were plant height, ASI, grain yield, number of kernel per cob, number of kernel rows, ear length, and ear height. The PCV values were higher than GCV, indicating the influence of the environment in the studied traits. Nitrogen rates and variety significantly (p < 0.05) influenced grain yield production. Mean grain yields and economic parameter estimates increased with increasing nitrogen rates, with the 30 and 180 kg∙N∙ha−1 plots exhibiting the lowest and highest grain yields of 1238 kg∙ha−1 and 2098 kg∙ha−1, respectively. Variety and nitrogen effects on partial factor productivity (PFPN), agronomic efficiency (AEN), net returns (NR), value cost ratio (VCR) and marginal return (MR) indicated that these parameters were significantly affected (p < 0.05) by these factors. The highest PFPN (41.3 kg grain kg−1∙N) and AEN (29.4 kg grain kg−1∙N) were obtained in the 30 kg∙N∙ha−1 plots, while the highest VCR (2.8) and MR (SLL 1.8 SLL−1 spent on N) were obtained in the 180 kg∙N∙ha−1. The significant influence of variety and nitrogen on traits suggests that increasing yields and maximizing profits require use of appropriate nitrogen fertilization and improved farming practices that could be exploited for increased productivity of maize.

J-family genes redundantly regulate flowering time and increase yield in soybean

Soybean(Glycine max)is a short-day crop whose flowering time is regulated by photoperiod.The longjuvenile trait extends its vegetative phase and increases yield under short-day conditions.Natural variation in J,the major locus controlling this trait,modulates flowering time.We report that the three J-family genes influence soybean flowering time,with the triple mutant Guangzhou Mammoth-2 flowering late under short days by inhibiting transcription of E1-family genes.J-family genes offer promising allelic combinations for breeding.