Productive test of a newly drying technology of veneer： intermittent-contact drying of veneer with flexible screen belt

A newly drying technology, intermittent-contact drying of veneer with flexible screen belt (ICD-fbs), was invented and used in poplar veneer drying. Productive test was carried out for validating the practical use of this drying method. The test result shows that to dispose flexible screen belts on the two sides of hot board could help steam discharge remarkably. The veneer dried using ICD-fsb method had smooth and level surface, less deformation and warping, even moisture content, and high utilization rate. The time for opening hot board to discharge steam,which, early or late, is a key to obtain good drying result, was determined at the time when the core's temperature of veneer reaches 100℃ (vaporization). Using ICD-fsb method, the shrinking rates in tangent of veneer were from 1.90% to 2.26% for veneer of 0.4 mm in thickness,2.49% to 4.50% for veneer of 1 mm in thickness and 1.34% to 3.30% for veneer of 1.7 mm in thickness, which are much lower than the results obtained by other drying methods. The method of ICD-fsb offers a reliable technological guarantee for solving the deformation problem of veneer drying, especially the deformation of wood from quick-growing plantation.

Drying Technology of Angiotensin Converting Enzyme Inhibitory Peptide Derived from Bovine Casein

Drying technology of angiotensin converting enzyme （ACE） inhibitory peptides derived from bovine casein was investigated. No significance was observed on ACE inhibitory activity of products prepared by spay drying and freeze drying （P〉0.05）. Spay drying was the best drying process for practical industry production. The inlet temperature ranged from 140℃ to 160℃ and the exit temperature ranged from 70 ℃ to 90 ℃ during the spay drying process. Under the optimal conditions, scale-up of angiotensin converted enzyme inhibitory peptide from 1 L to 10 L and the experiment was successively conducted. Peptide yield was 29% and half inhibitory concentration （IC50） was 0.53 g. L^-1.

Dry electrode technology for scalable and flexible high-energy sulfur cathodes in all-solid-state lithium-sulfur batteries

All-solid-state lithium-sulfur batteries(ASSLSBs)employing sulfide solid electrolytes are one of the most promising next-generation energy storage systems due to their potential for higher energy density and safety.However,scalable fabrication of sheet-type sulfur cathodes with high sulfur loading and excellent performances remains challenging.In this work,sheet-type freestanding sulfur cathodes with high sulfur loading were fabricated by dry electrode technology.The unique fibrous morphologies of polytetrafluoroethylene(PTFE)binders in dry electrodes not only provides excellent mechanical properties but also uncompromised ionic/electronic conductance.Even employed with thickened dry cathodes with high sulfur loading of 2 mg cm^(-2),ASSLSBs still exhibit outstanding rate performance and cycle stability.Moreover,the all-solid-state lithium-sulfur monolayer pouch cells(9.2 m Ah)were also demonstrated and exhibited excellent safety under a harsh test situation.This work verifies the potential of dry electrode technology in the scalable fabrication of thickened sulfur cathodes and will promote the practical applications of ASSLSBs.

The Application of Cold Banding Technology for Dust Removed From BOF Gas Using Dry Dedusting Technology

Firstly, physical and chemical properties of dust removed from BOF gas are analyzed, and then the cold banding technology of dust removed from BOF gas and its application are introduced. Tests have proved that using cooled agglomerated pellets made of the dust removed from BOF gas and small amounts of modified starch as a coolant and slagging agent in steel production can bring about considerable economic, social and environmental benefits.

The technology of raising rice seedlings in dry nursery in China

A new technology of raising rice seedlings in dry nursery began to be adopted in early 1980’s inChina. It expanded in Northeast of the Country and spreaded from North to South in the followingyears. In 1995, it was listed as one of the national popularization project during the ’Ninth Five-Year-Plan’ by the Country Government. The total area was up to 9.3 million hm~2 in 1996 (cover-ing 80% paddy field in the northern parts of China). The expected popularized area will be up to15.3 million hm~2 in 2000 according to the Ministry of Agriculture, half of the total rice-growingarea in China.

Analyzing Heat Extraction and Sustainability of EGS with a Novel Model

We investigate the subsurface heat exchange process in EGS （enhanced geothermal systems） with a previously developed novel model. This model treats the porous heat reservoir as an equivalent porous medium of a single porosity. However, it considers local thermal non-equilibrium between solid rock matrix and fluid flowing in the factures and employs two energy conservation equations to describe heat transfer in the rock matrix and in the fractures, respectively, enabling the modeling and analyses of convective heat exchange in the heat reservoir. Another salient feature of this model is its capability of simulating the complete subsurface heat exchange process in EGS. The EGS subsurface geometry of interest physically consists of multiple domains： open channels for injection and production wells, the artificial heat reservoir, and the rocks enclosing the heat reservoir, while computationally we treat it as a single-domain of multiple sub-regions associated with different sets of characteristic properties （porosity and permeability, etc.）. This circumvents typical difficulties about matching boundary conditions between sub-domains in traditional multi-domain approaches and facilitates numerical implementation and simulation of the complete subsurface heat exchange process. This model is used to perform a comprehensive parametric study with respect to an imaginary doublet EGS. Effects of several parameters, including the permeability of heat reservoir, heat exchange coefficient in the heat reservoir, the specific area of fractures in the heat reservoir, and thermal compensation from surrounding rocks, on the heat extraction efficiency and EGS lifetime are analyzed.