The accurate knowledge of the thrust vector eccentricity and beam divergence characteristics of Hall thrusters are of significant engineering value for the beneficial integration and successful application of Hall thr...The accurate knowledge of the thrust vector eccentricity and beam divergence characteristics of Hall thrusters are of significant engineering value for the beneficial integration and successful application of Hall thrusters on spacecraft.For the characteristics of the plume bipolar diffusion due to the annular discharge channel of the Hall thruster,a Gaussian-fitted method for thrust vector deviation angle and beam divergence of Hall thrusters based on dual Faraday probe array planes was proposed in respect of the Hall thruster beam characteristics.The results show that the ratios of the deviation between the maximum and minimum values of the beam divergence angle and the thrust vector eccentricity angle using a Gaussian fit to the optimized Faraday probe dual plane to the mean value are 1.4%and 11.5%,respectively.The optimized thrust vector eccentricity angle obtained has been substantially improved,by approximately 20%.The beam divergence angle calculated using a Gaussian fitting to the optimized Faraday probe dual plane is approximately identical to the non-optimized one.The beam divergence and thrust vector eccentricity angles for different anode mass flow rates were obtained by averaging the beam divergence and thrust vector eccentricity angles calculated by the dual-plane,Gaussian-fitted ion current density method for different cross-sections.The study not only allows for an immediate and effective tool for determining the design of thrust vector adjustment mechanisms of spacecraft with different power Hall thrusters but also for characterizing the 3D spatial distribution of the Hall thruster plume.展开更多
The present work deals with the reflection of plane seismic waves at the stress-free plane surface of double-porosity dualpermeability material. The incidence of two main waves（i.e., P1 and SV） is considered. As a r...The present work deals with the reflection of plane seismic waves at the stress-free plane surface of double-porosity dualpermeability material. The incidence of two main waves（i.e., P1 and SV） is considered. As a result of the incident waves,four reflected（three longitudinal and one shear） waves are found in the medium. The expressions of reflection coefficients for a given incident wave are obtained as a non-singular system of linear equations. The energy shares of reflected waves are obtained in the form of an energy matrix. A numerical example is considered to calculate the partition of incident energy for fully closed as well as perfectly open pores. Effect of incident direction on the partition of the incident energy is analyzed with the change in wave frequency, wave-induced fluid-flow, pore-fluid viscosity and double-porosity structure. It has been confirmed from the numerical interpretation that during the reflection process, conservation of incident energy is obtained at each angle of incidence.展开更多
Phenomena of reflection and refraction of plane harmonic waves at a plane interface between an elastic solid and doubleporosity dual-permeability material are investigated. The elastic solid behaves non-dissipatively,...Phenomena of reflection and refraction of plane harmonic waves at a plane interface between an elastic solid and doubleporosity dual-permeability material are investigated. The elastic solid behaves non-dissipatively, while double-porosity dual-permeability materials behave dissipatively to wave propagation due to the presence of viscosity in pore fluids. All the waves(i.e., incident and reflected) in an elastic medium are considered as homogeneous(i.e., having the same directions of propagation and attenuation), while all the refracted waves in double-porosity dual-permeability materials are inhomogeneous(i.e., having different directions of propagation and attenuation). The coefficients of reflection and refraction for a given incident wave are obtained as a non-singular system of linear equations. The energy shares of reflected and refracted waves are obtained in the form of an energy matrix. A numerical example is considered to calculate the partition of incident energy among various reflected and refracted waves. The effect of incident direction on the partition of the incident energy is analyzed with a change in wave frequency, wave-induced fluid-flow, pore-fluid viscosity and double-porosity structure.It has been confirmed from numerical interpretation that during the reflection/refraction process, conservation of incident energy is obtained at each angle of incidence.展开更多
Existing rotary ultrasonic motors operating in extreme environments cannot meet the requirements of good environmental adaptability and compact structure at same time,and existing ultrasonic motors with Langevin trans...Existing rotary ultrasonic motors operating in extreme environments cannot meet the requirements of good environmental adaptability and compact structure at same time,and existing ultrasonic motors with Langevin transducers show better environmental adaptability,but size of these motors are usually big due to the radial arrangement of the Langevin transducers.A novel dual driving face rotary ultrasonic motor is proposed,and its working principle is experimentally verified.The working principle of the novel ultrasonic motor is firstly proposed.The 5th in-plane flexural vibration travelling wave,excited by the Langevin transducers around the stator ring,is used to drive the rotors.Then the finite element method is used in the determination of dimensions of the prototype motor,and the confirmation of its working principle.After that,a laser Doppler vibrometer system is used for measuring the resonance frequency and vibration amplitude of the stator.At last,output characteristics of the prototype motor are measured,environmental adaptability is tested and performance for driving a metal ball is also investigated.At room temperature and 200 V(zero to peak) driving voltage,the motor’s no-load speed is 80 r/min,the stalling torque is 0.35 N·m and the maximum output power is 0.85 W.The response time of this motor is 0.96 ms at the room temperature,and it decreases or increases little in cold environment.A metal ball driven by the motor can rotate at 210 r/min with the driving voltage 300 V(zero to peak).Results indicate that the prototype motor has a large output torque and good environmental adaptability.A rotary ultrasonic motor owning compact structure and good environmental adaptability is proposed,and lays the foundations of ultrasonic motors’ applications in extreme environments.展开更多
As the infrared technology continues to advance, there is a growing demand for multispectral detectors for advanced IR systems with better target discrimination and identification. Both HgCdTe detectors and quantum we...As the infrared technology continues to advance, there is a growing demand for multispectral detectors for advanced IR systems with better target discrimination and identification. Both HgCdTe detectors and quantum well GaAs/AlGaAs photodetectors offer wavelength flexibility from medium wavelength to very long wavelength and multicolor capability in these regions. The main challenges facing all multicolor devices are more complicated device structtures, thicker and multilayer material growth, and more difficult device fabrication, especially when the array size gets larger and pixel size gets smaller. In the paper recent progress in development of two color HgCdTe photodiodes and quantum well infrared photodetectors is presented. More attention is devoted to HgCdTe detectors. The two color detector arrays are based upon an n P N (the capital letters mean the materials with larger bandgap energy) HgCdTe triple layer heterojunction design. Vertically stacking the two p n junctions permits incorporation of both detectros into a single pixel. Both sequential mode and simultaneous mode detectors are fabricated. The mode of detection is determined by the fabrication process of the multilayer materials. Also the performances of stacked multicolor QWIPs detectors are presented. For multicolor arrays, QWIP’s narrow band spectrum is an advantage, resulting in low spectral crosstalk. The major challenge for QWIP is developing broadband or multicolor optical coupling structures that permit efficient absorption of all required spectral bands.展开更多
设计了用于制冷型红外双波段探测器的、广角光学系统,并进行了被动式消热差设计。镜头由6片透镜组成,通过不同镜片材料搭配来进行消色差设计,实现在环境温度-40~70℃范围内被动式消热差。光学系统采用中长波共焦面设计,设计波段为3.5~4....设计了用于制冷型红外双波段探测器的、广角光学系统,并进行了被动式消热差设计。镜头由6片透镜组成,通过不同镜片材料搭配来进行消色差设计,实现在环境温度-40~70℃范围内被动式消热差。光学系统采用中长波共焦面设计,设计波段为3.5~4.9μm和7.5~9.5μm,焦距为11 mm, F数为1.6,全视场角150°。结果表明,此光学系统工作范围大、结构简单、透过率高,能够实现在全工作温度范围内成像质量良好。展开更多
基金the Key Laboratory Funds for Science and Technology on Vacuum Technology and Physics Laboratory(No.HTKJ2022KL510002)the Military Test Instruments Program(No.2006ZCTF0054)。
文摘The accurate knowledge of the thrust vector eccentricity and beam divergence characteristics of Hall thrusters are of significant engineering value for the beneficial integration and successful application of Hall thrusters on spacecraft.For the characteristics of the plume bipolar diffusion due to the annular discharge channel of the Hall thruster,a Gaussian-fitted method for thrust vector deviation angle and beam divergence of Hall thrusters based on dual Faraday probe array planes was proposed in respect of the Hall thruster beam characteristics.The results show that the ratios of the deviation between the maximum and minimum values of the beam divergence angle and the thrust vector eccentricity angle using a Gaussian fit to the optimized Faraday probe dual plane to the mean value are 1.4%and 11.5%,respectively.The optimized thrust vector eccentricity angle obtained has been substantially improved,by approximately 20%.The beam divergence angle calculated using a Gaussian fitting to the optimized Faraday probe dual plane is approximately identical to the non-optimized one.The beam divergence and thrust vector eccentricity angles for different anode mass flow rates were obtained by averaging the beam divergence and thrust vector eccentricity angles calculated by the dual-plane,Gaussian-fitted ion current density method for different cross-sections.The study not only allows for an immediate and effective tool for determining the design of thrust vector adjustment mechanisms of spacecraft with different power Hall thrusters but also for characterizing the 3D spatial distribution of the Hall thruster plume.
文摘The present work deals with the reflection of plane seismic waves at the stress-free plane surface of double-porosity dualpermeability material. The incidence of two main waves（i.e., P1 and SV） is considered. As a result of the incident waves,four reflected（three longitudinal and one shear） waves are found in the medium. The expressions of reflection coefficients for a given incident wave are obtained as a non-singular system of linear equations. The energy shares of reflected waves are obtained in the form of an energy matrix. A numerical example is considered to calculate the partition of incident energy for fully closed as well as perfectly open pores. Effect of incident direction on the partition of the incident energy is analyzed with the change in wave frequency, wave-induced fluid-flow, pore-fluid viscosity and double-porosity structure. It has been confirmed from the numerical interpretation that during the reflection process, conservation of incident energy is obtained at each angle of incidence.
文摘Phenomena of reflection and refraction of plane harmonic waves at a plane interface between an elastic solid and doubleporosity dual-permeability material are investigated. The elastic solid behaves non-dissipatively, while double-porosity dual-permeability materials behave dissipatively to wave propagation due to the presence of viscosity in pore fluids. All the waves(i.e., incident and reflected) in an elastic medium are considered as homogeneous(i.e., having the same directions of propagation and attenuation), while all the refracted waves in double-porosity dual-permeability materials are inhomogeneous(i.e., having different directions of propagation and attenuation). The coefficients of reflection and refraction for a given incident wave are obtained as a non-singular system of linear equations. The energy shares of reflected and refracted waves are obtained in the form of an energy matrix. A numerical example is considered to calculate the partition of incident energy among various reflected and refracted waves. The effect of incident direction on the partition of the incident energy is analyzed with a change in wave frequency, wave-induced fluid-flow, pore-fluid viscosity and double-porosity structure.It has been confirmed from numerical interpretation that during the reflection/refraction process, conservation of incident energy is obtained at each angle of incidence.
基金supported by National Natural Science Foundation of China(Grant Nos.5120520351275228+7 种基金5107521291123020)Science and Research FoudotionNanjing University of Aeronautics and Astronautics(Grant Nos.56YAH12015NZ2010002S0896-013)Innovation and Entrepreneurship Program of Jiangsuand Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Existing rotary ultrasonic motors operating in extreme environments cannot meet the requirements of good environmental adaptability and compact structure at same time,and existing ultrasonic motors with Langevin transducers show better environmental adaptability,but size of these motors are usually big due to the radial arrangement of the Langevin transducers.A novel dual driving face rotary ultrasonic motor is proposed,and its working principle is experimentally verified.The working principle of the novel ultrasonic motor is firstly proposed.The 5th in-plane flexural vibration travelling wave,excited by the Langevin transducers around the stator ring,is used to drive the rotors.Then the finite element method is used in the determination of dimensions of the prototype motor,and the confirmation of its working principle.After that,a laser Doppler vibrometer system is used for measuring the resonance frequency and vibration amplitude of the stator.At last,output characteristics of the prototype motor are measured,environmental adaptability is tested and performance for driving a metal ball is also investigated.At room temperature and 200 V(zero to peak) driving voltage,the motor’s no-load speed is 80 r/min,the stalling torque is 0.35 N·m and the maximum output power is 0.85 W.The response time of this motor is 0.96 ms at the room temperature,and it decreases or increases little in cold environment.A metal ball driven by the motor can rotate at 210 r/min with the driving voltage 300 V(zero to peak).Results indicate that the prototype motor has a large output torque and good environmental adaptability.A rotary ultrasonic motor owning compact structure and good environmental adaptability is proposed,and lays the foundations of ultrasonic motors’ applications in extreme environments.
文摘As the infrared technology continues to advance, there is a growing demand for multispectral detectors for advanced IR systems with better target discrimination and identification. Both HgCdTe detectors and quantum well GaAs/AlGaAs photodetectors offer wavelength flexibility from medium wavelength to very long wavelength and multicolor capability in these regions. The main challenges facing all multicolor devices are more complicated device structtures, thicker and multilayer material growth, and more difficult device fabrication, especially when the array size gets larger and pixel size gets smaller. In the paper recent progress in development of two color HgCdTe photodiodes and quantum well infrared photodetectors is presented. More attention is devoted to HgCdTe detectors. The two color detector arrays are based upon an n P N (the capital letters mean the materials with larger bandgap energy) HgCdTe triple layer heterojunction design. Vertically stacking the two p n junctions permits incorporation of both detectros into a single pixel. Both sequential mode and simultaneous mode detectors are fabricated. The mode of detection is determined by the fabrication process of the multilayer materials. Also the performances of stacked multicolor QWIPs detectors are presented. For multicolor arrays, QWIP’s narrow band spectrum is an advantage, resulting in low spectral crosstalk. The major challenge for QWIP is developing broadband or multicolor optical coupling structures that permit efficient absorption of all required spectral bands.
文摘设计了用于制冷型红外双波段探测器的、广角光学系统,并进行了被动式消热差设计。镜头由6片透镜组成,通过不同镜片材料搭配来进行消色差设计,实现在环境温度-40~70℃范围内被动式消热差。光学系统采用中长波共焦面设计,设计波段为3.5~4.9μm和7.5~9.5μm,焦距为11 mm, F数为1.6,全视场角150°。结果表明,此光学系统工作范围大、结构简单、透过率高,能够实现在全工作温度范围内成像质量良好。
