DYNAMIC PROPAGATION PROBLEM ON DUGDALE MODEL OF MODE Ⅲ INTERFACE CRACK

By the theory of complex functions, the dynamic propagation problem on Dugdale model of mode Ⅲ interface crack for nonlinear characters of materials was studied. The general expressions of analytical solutions are obtained by the methods of self-similar functions. The problems dealt with can be easily transformed into Riemann-Hilbert problems and their closed solutions are attained rather simply by this approach. After those solutions were utilized by superposition theorem, the solutions of arbitrarily complex problems could be obtained.

A Dugdale model based geometrical amplifier enables the measurement of separation-to-failure for a cohesive interface

Regardless of all kinds of different formulae used for the traction-separation relationship in cohesive zone modeling,the peak tractionσ_m and the separation-to-failureδ_0(or equivalently the work-to-separationΓ) are the primary parameters which control the interfacial fracture behaviors. Experimentally,it is hard to determine those quantities,especially forδ_0,which occurs in a very localized region with possibly complicated geometries by material failure.Based on the Dugdale model,we show that the separation-to-failure of an interface could be amplified by a factor of L/r_p in a typical peeling test,where L is the beam length and r_p is the cohesive zone size.Such an amplifier makesδ_0 feasible to be probed quantitatively from a simple peeling test. The method proposed here may be of importance to understanding interfacial fractures of layered structures,or in some nanoscale mechanical phenomena such as delamination of thin films and coatings.

Elasto-plastic analysis of crack in metallic foams

To determine the solutions of the well-known problem of a finite width strip with single edge crack,some results on elasto-plastic fracture analysis for metallic foams are reported.Meanwhile,in order to discuss and put an insight into the nonlinear fracture analysis,the Dugdale model for plastic deformation of this configuration for metallic foams is recommended and solved.Combining the asymptotic solution with the Dugdale model and elastic solution,the stress field in the plastic zone and the size of the plastic zone are expressed as analytical forms.Based on Williams expansion method,the estimate of the scale factor is also completed and analyzed.In view of these analytical solutions,the results show the scale factor is a useful parameter for the fracture theory of metallic foams.

DETERMINATION OF CRACK SURFACE DISPLACEMENTS FOR A RADIAL CRACK EMANATING FROM A SEMI-CIRCULAR NOTCH USING WEIGHT FUNCTION METHOD

A radial crack emanating from a semi-circular notch is of significant engineering importance. Accurate determination of key fracture mechanics parameters is essential for damage tolerance design and fatigue crack growth life predictions. The purpose of this paper is to provide an efficient and accurate closed-form weight function approach to the calculation of crack surface displacements for a radial crack emanating from a semi-circular notch in a semi-infinite plate. Results are presented for two load conditions： remote applied stress and uniform stress segment applied to crack surfaces. Based on a correction of stress intensity factor ratio, highly accurate analytical equations of crack surface displacements under the two load conditions are developed by fitting the data obtained with the weight function method. It is demonstrated that the Wu- Carlsson closed-form weight functions are very efficient, accurate and easy-to-use for calculating crack surface displacements for arbitrary load conditions. The method will facilitate fatigue crack closure and other fracture mechanics analyses where accurate crack surface displacements are required.