Intercalation modification of FeOCl and its application in dye wastewater treatment

The textile industry spreads globally with the challenges of its wastewater treatment,especially dyes,which are difficult to degrade.To improve coagulation-flocculation process in dye wastewater treatment,an intercalation process was employed to prepare a new efficient coagulant of lithium borohydride-iron oxychloride(LiBH_(4)_FeOCl) in this study.The layered crystal pristine iron oxychloride(FeOCl) material was prepared by chemical gas phase migration.LiBH4 was introduced into the layers of two dimensional(2 D) FeOCl nanosheets by a simple method of liquid phase insertion.The samples were characterized by a field emitting scanning electron microscopy(SEM),a rotating anode X-ray powder diffractometer(XRD),etc.The cationic dye was employed as the simulated pollutant.A coagulation and decolorization experimental device was built to study the coagulation performance of the new coagulant LiBH_(4)_FeOCl.It is found that the intercalation modified LiBH_(4)_FeOCl exhibits the characteristics of crystal structure,and the layered structure of FeOCl is preserved.LiBH_(4)_FeOCl,as an insoluble inorganic solid coagulant,performs well for dye pollutants of methyl red,basic yellow 1,methylene blue,rhodamine B,ethyl violet and Janus green B.The reaction rate is significantly 68% higher than the current commercial coagulants of Al_(2)(SO_(4))_(3).The mechanism analysis reveals that LiBH_(4)_FeOCl breaks and disperses rapidly in the water environment.Its negatively charged material particles can be electrostatically adsorbed with dye pollutant molecules through electrostatic action.The above collaborative actions of breaking,dispersion and electrostatic adsorption are the main coagulation mechanisms of LiBH_(4)_FeOCl.The solid inorganic coagulant of LiBH4FeOCl provides a competitive alternative for traditional inorganic salts and organic coagulants.

Charged modified tight ceramic ultrafiltration membranes for treatment of cationic dye wastewater

Tight ceramic ultrafiltration membranes have been proven to exhibit good rejection performance for reactive dye wastewater at high temperatures because of their high thermal and chemical resistance.However,the application of ceramic membranes for the treatment of cationic dye wastewater is challenging because of their surface charge.In this study,a ceramic membrane is modified by grafting aminosilane(KH-551)to enhance the positive charge of the membrane surface.The rejection performance of the charged modified ceramic membrane toward the methylene blue solution is significantly improved.The modification substance is bonded to the ceramic membrane surface via covalent bonding,which imparts good thermal stability.The modified ceramic membrane exhibits stable separation performance toward the methylene blue solution.Overall,this study provides valuable guidance for the adjustment of the ceramic membrane surface charge for treating industrial cationic dye wastewater.

A pilot scale anoxic/oxic membrane bioreactor(A/O MBR) for woolen mill dyeing wastewater treatment

A pilot scale(10 m 3/d) anoxic/oxic membrane bioreactor(A/O MBR) was tested for dyeing wastewater treatment of woolen mill without wasting sludge in 125 days operation. Results showed that the effluent quality was excellent, i.e. effluent COD less than 25 mg/L, BOD 5 under 5 mg/L, turbidity lower than 0 65 NTU, and colour less than 30 DT, and met with the reuse water standard of China. The removal rates of COD, BOD 5, colour, and turbidity were 92 4%, 98 4%, 74% and 98 9%, respectively. Constant flux operation mode was carried out in this study, and backwash was effective for reducing membrane fouling and maintaining constant flux. Membrane fouling had heavy impact on energy consumption. More attention should be paid on pipe selection and design for the sidestream MBR system, too.

An innovative integrated oxidation ditch with vertical circle(IODVC) for wastewater treatment

The oxidation ditch process is economic and efficient for wastewater treatment, but its application is limited in case where land is costly due to its large land area required. An innovative integrated oxidation ditch with vertical circle(IODVC) system was developed to treat domestic and industrial wastewater aiming to save land area. The new system consists of a single channel divided into two ditches(the top one and the bottom one by a plate), a brush, and an innovative integral clarifier. Different from the horizontal circle of the conventional oxidation ditch, the flow of IODVC system recycles from the top zone to the bottom zone in the vertical circle as the brush is running, and then the IODVC saved land area required by about 50% compared with a conventional oxidation ditch with an intrachannel clarifier. The innovative integral clarifier is effective for separation of liquid and solids, and is preferably positioned at the opposite end of the brush in the ditch. It does not affect the hydrodynamic characteristics of the mixed liquor in the ditch, and the sludge can automatically return to the down ditch without any pump. In this study, experiments of domestic and dye wastewater treatment were carried out in bench scale and in full scale, respectively. Results clearly showed that the IODVC efficiently removed pollutants in the wastewaters, i.e., the average of COD removals for domestic and dye wastewater treatment were 95% and 90%, respectively, and that the IODVC process may provide a cost effective way for full scale dye wastewater treatment.

Efficient decolorization of dye-containing wastewater using mycelial pellets formed of marine-derived Aspergillus niger

In order to improve the efficient decolorization of dye-containing water by biosorbent and understand the biosorption mechanism, the self-immobilization mycelial pellets were prepared using a marine-derived fungus Aspergillus niger ZJUBE-1, and an azo dye, Congo red was chosen as a model dye to investigate batch decolorization efficiency by pellets. The pellets as biosorbent showed strong salt and acid tolerance in biosorption process. The results for dye adsorption showed that the biosorption process fitted well with models of pseudo-second-order kinetic and Langmuir isotherm, with a maximum adsorption capacity of 263.2 mg·g^(-1) mycelium. During 6 batches of continuous decolorization operation, the mycelial pellets could possess efficient decolorization abilities(>98.5%).The appearance of new peak in the UV–Vis spectral result indicated that the decolorization process may also contain biodegradation. The mechanism studies showed that efficient biosorption ability of pellets only relies on the active zone on the surface of the pellet, which can be enhanced by nutrition supplement or be shifted outward by a reculture process.

Preparation and characterization of Fe_2O_3-CeO_2-TiO_2/γ-Al_2O_3 catalyst for degradation dye wastewater

In order to develop a catalyst with high activity for catalytic wet oxidation （CWO） process at room temperature and atmospheric pressure, Fe2O3-CeO2-TiO2/γ-Al2O3 catalyst was prepared by consecutive impregnation method and the prepared parameters were optimized. The structure of the catalyst was characterized by BET, XRF, SEM and XPS technologies, and the actual wastewater was used to investigate the catalytic activity of Fe2O3-CeO2-TiO2/γ-Al2O3 in CWO process. The experimental results showed that the prepared catalyst exhibited good catalytic activity when the doping amount of Ti was 1.0 wt% （the weight ratio of Ti to carriers）, and the middle product, Fe2O3-CeO2-TiO2/γ-Al2O3, was calcined in 450℃ for 2 h. The CWO experiment for treating actual dye wastewater indicated that the COD, color and TOC of actual wastewater were decreased by 62.23%, 50.12% and 41.26% in 3 h, respectively, and the ratio of BOD5/COD was increased from 0.19 to 0.30.

Positively charged microporous ceramic membrane for the removal of Titan Yellow through electrostatic adsorption

To develop a depth filter based on the electrostatic adsorption principle, positively charged microporous ceramic membrane was prepared from a diatomaceous earth ceramic membrane.The internal surface of the highly porous ceramic membrane was coated with uniformly distributed electropositive nano-Y2O3 coating. The dye removal performance was evaluated through pressurized filtration tests using Titan Yellow aqueous solution. It showed that positively charged microporous ceramic membrane exhibited a flow rate of 421 L/（m^2·hr） under the trans-membrane pressure of 0.03 bar. Moreover it could effectively remove Titan Yellow with feed concentration of 10 mg/L between pH 3 to 8. The removal rate increased with the enhancement of the surface charge properties with a maximum rejection of 99.6%. This study provides a new and feasible method of removing organic dyes in wastewater. It is convinced that there will be a broad market for the application of charged ceramic membrane in the field of dye removal or recovery from industry wastewater.

Bandgap engineering of tetragonal phase CuFeS_(2)quantum dots via mixed-valence single-atomic Ag decoration for synergistic Cr(VI)reduction and RhB degradation

Bandgap engineering through single-atom site binding on semiconducting photocatalyst can boost the intrinsic activity,selectivity,carrier separation,and electron transport.Here,we report a mixed-valence Ag(0)and Ag(I)single atoms co-decorated semiconducting chalcopyrite quantum dots(Ag/CuFeS_(2)QDs)photocatalyst.It demonstrates efficient photocatalytic performances for specific organic dye(rhodamine B,denoted as RhB)as well as inorganic dye(Cr(VI))removal in water under natural sunlight irradiation.The RhB degradation and Cr(VI)removal efficiencies by Ag/CuFeS_(2)QDs were 3.55 and 6.75 times higher than those of the naked CuFeS_(2)QDs at their optimal pH conditions,respectively.Besides,in a mixture of RhB and Cr(VI)solution under neutral condition,the removal ratio has been elevated from 30.2%to 79.4%for Cr(VI),and from 95.2%to 97.3%for RhB degradation by using Ag/CuFeS_(2)QDs after 2 h sunlight illumination.The intrinsic mechanism for the photocatalytic performance improvement is attributed to the narrow bandgap of the single-atomic Ag(I)anchored CuFeS_(2)QDs,which engineers the electronic structure as well as expands the optical light response range.Significantly,the highly active Ag(0)/CuFeS_(2)and Ag(I)/CuFeS_(2)effectively improve the separation efficiency of the carriers,thus enhancing the photocatalytic performances.This work presents a highly efficient single atom/QDs photocatalyst,constructed through bandgap engineering via mixed-valence single noble metal atoms binding on semiconducting QDs.It paves the way for developing high-efficiency single-atom photocatalysts for complex pollutions removal in dyeing wastewater environment.