The E-plane waveguide branch directional couplers are analyzed by a method which combines the multimode network theory with rigorous mode-matching approach. The electromagnetic field components are expanded by the sup...The E-plane waveguide branch directional couplers are analyzed by a method which combines the multimode network theory with rigorous mode-matching approach. The electromagnetic field components are expanded by the superposition of LSEx modes rather than TE and TM modes in the mode-matching procedure. Meanwhile, the electromagnetic problem is transferred into the network problem through the mode-matching treatment. It is shown that the present method has the advantages of simplicity and less computation without affecting the accuracy of the calculation.展开更多
A method of designing an E-plane power combiner composed of two quarter-arc bent rectangular waveguides is proposed for sub-THz and THz waves. The quarter-arc bent-waveguide power combiner has a simple geometry which ...A method of designing an E-plane power combiner composed of two quarter-arc bent rectangular waveguides is proposed for sub-THz and THz waves. The quarter-arc bent-waveguide power combiner has a simple geometry which is easy to design and fabricate. By HFSS codes, the physical mechanism and performance of the power combiner are analyzed, and the relationship between the output characteristics and the structure/operating parameters is given. Simulation results show that our power combiner is suitable for the combining of two equalpower and reversed-phase signals, the bandwidth of the combiner is wide and can be adjusted by the radius of the quarter-arc, and the isolation performance of the combiner can be improved by adding thin film resistive septa at the junction of two quarter-arc bent waveguides. Meanwhile, an approximate method based on the analytic geometrical analysis is given to design this power combiner for different frequency bands.展开更多
This paper presents a wide-bandwidth back-illuminated modified uni-traveling-carrier photodiode(MUTC-PD)packaged with standard WR-5 rectangular waveguide for high-speed wireless communications.With optimized epitaxy s...This paper presents a wide-bandwidth back-illuminated modified uni-traveling-carrier photodiode(MUTC-PD)packaged with standard WR-5 rectangular waveguide for high-speed wireless communications.With optimized epitaxy structure and coplanar waveguide electrodes,the fabricated 4-μm-diameter PD exhibits ultra-flat frequency response and high saturation power.Integrated passive circuits including low-loss bias-tee and E-plane probe are designed to package the PD into a compact module with waveguide output.The packaged PD module has demonstrated a flat frequency response with fluctuations within±2.75 d B over a broadband of 140–220 GHz and a high saturated output power of-7.8 d Bm(166μW)at 140 GHz.For wireless communication applications,the packaged PD is used to implement 1-m free space transmission at carrier frequencies of 150.5 and 210.5 GHz,with transmission rates of 75 and 90 Gbps,respectively.展开更多
High-Q notch cavities combined with a low-order E-plane fin-line filter are used for designing a sharp-rejection band-pass filter （BPF） at W-band. Based on the conventional E-plane fin-line structure, an E-plane ext...High-Q notch cavities combined with a low-order E-plane fin-line filter are used for designing a sharp-rejection band-pass filter （BPF） at W-band. Based on the conventional E-plane fin-line structure, an E-plane extended cavity is implemented to enhance the suppression at unwanted frequency points near the passband. The passband performance is not disturbed and the whole structure remains simple to be assembled. To extend the suppression bandwidth, two separated notch cavities are designed and arranged at the input and output ends of the fin-line filter, respectively. A prototype BPF is fabricated and measured. Experimental results show that the minimum insertion loss is 2.7 dB over a passband of 1 GHz. The suppression is about 85 dB near 91.7 GHz, which is 2.2 GHz lower than the center frequency. Experimental results agree well with simulation.展开更多
文摘The E-plane waveguide branch directional couplers are analyzed by a method which combines the multimode network theory with rigorous mode-matching approach. The electromagnetic field components are expanded by the superposition of LSEx modes rather than TE and TM modes in the mode-matching procedure. Meanwhile, the electromagnetic problem is transferred into the network problem through the mode-matching treatment. It is shown that the present method has the advantages of simplicity and less computation without affecting the accuracy of the calculation.
基金Supported by the National Natural Science Foundation of China under Grant No 11075032the Fundamental Research Funds for the Central Universities under Grant No ZYGX2014J033
文摘A method of designing an E-plane power combiner composed of two quarter-arc bent rectangular waveguides is proposed for sub-THz and THz waves. The quarter-arc bent-waveguide power combiner has a simple geometry which is easy to design and fabricate. By HFSS codes, the physical mechanism and performance of the power combiner are analyzed, and the relationship between the output characteristics and the structure/operating parameters is given. Simulation results show that our power combiner is suitable for the combining of two equalpower and reversed-phase signals, the bandwidth of the combiner is wide and can be adjusted by the radius of the quarter-arc, and the isolation performance of the combiner can be improved by adding thin film resistive septa at the junction of two quarter-arc bent waveguides. Meanwhile, an approximate method based on the analytic geometrical analysis is given to design this power combiner for different frequency bands.
基金supported in part by National Key Research and Development Program of China(No.2022YFB2803002)National Natural Science Foundation of China(Nos.62235005,62127814,62225405,61975093,61927811,61991443,61925104 and 61974080)Collaborative Innovation Centre of Solid-State Lighting and Energy-Saving Electronics.
文摘This paper presents a wide-bandwidth back-illuminated modified uni-traveling-carrier photodiode(MUTC-PD)packaged with standard WR-5 rectangular waveguide for high-speed wireless communications.With optimized epitaxy structure and coplanar waveguide electrodes,the fabricated 4-μm-diameter PD exhibits ultra-flat frequency response and high saturation power.Integrated passive circuits including low-loss bias-tee and E-plane probe are designed to package the PD into a compact module with waveguide output.The packaged PD module has demonstrated a flat frequency response with fluctuations within±2.75 d B over a broadband of 140–220 GHz and a high saturated output power of-7.8 d Bm(166μW)at 140 GHz.For wireless communication applications,the packaged PD is used to implement 1-m free space transmission at carrier frequencies of 150.5 and 210.5 GHz,with transmission rates of 75 and 90 Gbps,respectively.
基金The National Natural Science Foundation of China(No.60921063)
文摘High-Q notch cavities combined with a low-order E-plane fin-line filter are used for designing a sharp-rejection band-pass filter （BPF） at W-band. Based on the conventional E-plane fin-line structure, an E-plane extended cavity is implemented to enhance the suppression at unwanted frequency points near the passband. The passband performance is not disturbed and the whole structure remains simple to be assembled. To extend the suppression bandwidth, two separated notch cavities are designed and arranged at the input and output ends of the fin-line filter, respectively. A prototype BPF is fabricated and measured. Experimental results show that the minimum insertion loss is 2.7 dB over a passband of 1 GHz. The suppression is about 85 dB near 91.7 GHz, which is 2.2 GHz lower than the center frequency. Experimental results agree well with simulation.
