Catalytic hydrogenation is an appropriate method for the improvement of C9 petroleum resin（C9PR） quality. In this study, the Ni2P/SiO2（containing 10% of Ni） catalyst prepared by the temperature-programmed reductio...Catalytic hydrogenation is an appropriate method for the improvement of C9 petroleum resin（C9PR） quality. In this study, the Ni2P/SiO2（containing 10% of Ni） catalyst prepared by the temperature-programmed reduction（TPR） method was used for hydrogenation of C9 petroleum resins. The effect of reaction conditions on catalytic performance was studied, and the results showed that the optimum reaction temperature, pressure and liquid hourly space velocity（LHSV） was 250 ℃, 6.0 MPa, and 1.0 h-1, respectively. The bromine numbers of hydrogenated products were maintained at low values（250 mg Br/100g） within 300h, showing the high activity and stability of Ni2P/SiO2 catalyst. The fresh and spent catalysts were characterized by X-ray diffraction（XRD）, BET surface area（BET） analysis, scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, Fourier transform infrared（FTIR） pyridine adsorption, and X-ray photoelectron spectroscopy（XPS）. Compared with the traditional sulfurated-Ni W catalysts, Ni2P possessed globe-like structure instead of layered structure like the active phase of Ni WS, thereof exposing more active sites, which were responsible for the high activity of Ni2P/SiO2 catalyst. The stability of Ni2P/SiO2 catalyst was probably attributed to its high sulfur tolerance, antisintering, anti-coking and carbon-resistance ability. These properties might be further ascribed to the special Ni-P-S surface phase, high thermal stability of Ni2P nanoparticles and weak surface acidity for the Ni2P/SiO2 catalyst.展开更多
以氨基-1,2,4-三唑和2-偕二硝甲基-5-硝基四唑(HDNMNT)为原料,通过中和反应合成出两种新型含能离子盐——2-偕二硝甲基-5-硝基四唑3-氨基-1,2,4-三唑盐(3-ATDNMNT)和2-偕二硝甲基-5-硝基四唑4-氨基-1,2,4-三唑盐(4-ATDNMNT),收率分别为9...以氨基-1,2,4-三唑和2-偕二硝甲基-5-硝基四唑(HDNMNT)为原料,通过中和反应合成出两种新型含能离子盐——2-偕二硝甲基-5-硝基四唑3-氨基-1,2,4-三唑盐(3-ATDNMNT)和2-偕二硝甲基-5-硝基四唑4-氨基-1,2,4-三唑盐(4-ATDNMNT),收率分别为95.4%和96.7%;利用FT-IR、1 H NMR、13C NMR、15 N NMR及元素分析等方法对其结构进行表征;采用量子化学方法计算了3-ATDNMNT和4-ATDNMNT的爆轰性能;在标准状态下(膨胀比为70∶1),利用最小自由能原理,分别计算了两种离子盐在丁羟复合推进剂中的能量性能。结果表明,3-ATDNMNT的爆速和爆压分别为8.587km/s和33.58GPa,4-ATDNMNT的爆速和爆压分别为8.693km/s和34.31GPa。以3-ATDNMNT部分取代丁羟复合推进剂中的AP后,丁羟复合推进剂的理论比冲可达2 635.7N·s/kg。以4-ATDNMNT部分取代丁羟复合推进剂中的AP后,当HTPB、Al、AP及4-ATDNMNT各组分质量分数分别为10%、5%、15%及70%时,获得该丁羟复合推进剂的最高理论比冲为2 677.2N·s/kg。展开更多
目的:构建大鼠线粒体转录因子TFAM(A)、线粒体转录因子TFB1M(B1)、线粒体转录TFB2M(B2)及线粒体RNA聚合酶(POLRMT)的质粒标准品,为检测内耳细胞线粒体TFAM、TFB1M、TFB2M、POLRMT的mRNA表达水平做基础。方法:设计特异性引物和探针,提取...目的:构建大鼠线粒体转录因子TFAM(A)、线粒体转录因子TFB1M(B1)、线粒体转录TFB2M(B2)及线粒体RNA聚合酶(POLRMT)的质粒标准品,为检测内耳细胞线粒体TFAM、TFB1M、TFB2M、POLRMT的mRNA表达水平做基础。方法:设计特异性引物和探针,提取大鼠内耳组织总mRNA逆转录成c DNA,PCR扩增、纯化目的片段,将纯化产物与p Zero Back/blunt载体重组,提取重组质粒,经测序鉴定后,用实时荧光绝对定量PCR建立标准曲线。结果:测序结果与各目的序列一致,获得良好的标准曲线(R2>0.99)。结论:成功构建了各目的基因的质粒标准品。展开更多
基金financially supported by the Scientific Research Fund of Zhejiang Provincial Education Department (Y201225114)the Natural Science Foundation of Zhejiang Province (LY13B030006)
文摘Catalytic hydrogenation is an appropriate method for the improvement of C9 petroleum resin（C9PR） quality. In this study, the Ni2P/SiO2（containing 10% of Ni） catalyst prepared by the temperature-programmed reduction（TPR） method was used for hydrogenation of C9 petroleum resins. The effect of reaction conditions on catalytic performance was studied, and the results showed that the optimum reaction temperature, pressure and liquid hourly space velocity（LHSV） was 250 ℃, 6.0 MPa, and 1.0 h-1, respectively. The bromine numbers of hydrogenated products were maintained at low values（250 mg Br/100g） within 300h, showing the high activity and stability of Ni2P/SiO2 catalyst. The fresh and spent catalysts were characterized by X-ray diffraction（XRD）, BET surface area（BET） analysis, scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, Fourier transform infrared（FTIR） pyridine adsorption, and X-ray photoelectron spectroscopy（XPS）. Compared with the traditional sulfurated-Ni W catalysts, Ni2P possessed globe-like structure instead of layered structure like the active phase of Ni WS, thereof exposing more active sites, which were responsible for the high activity of Ni2P/SiO2 catalyst. The stability of Ni2P/SiO2 catalyst was probably attributed to its high sulfur tolerance, antisintering, anti-coking and carbon-resistance ability. These properties might be further ascribed to the special Ni-P-S surface phase, high thermal stability of Ni2P nanoparticles and weak surface acidity for the Ni2P/SiO2 catalyst.
文摘以镍为金属中心、对二甲苯二磷酸为有机配体,构筑了一种有机磷酸类Ni-MOF前驱体,再经过一步碳化,原位制备出多孔碳包覆Ni_2P纳米颗粒的复合材料.该复合材料保留了前驱体的片状形貌,比表面积可达202 m2/g,复合材料中的Ni_2P纳米颗粒具有良好的结晶度,颗粒均匀且无团聚现象.在锂离子电池性能测试中,该Ni_2P/C复合结构在缓解材料体积膨胀的同时提高了材料的电子和离子电导率,进而提高了材料的电化学性能.在0.2 C的电流密度下,材料首次充、放电比容量分别为247和226 m A·h·g-1,库仑效率可达91.7%,循环200圈后,库仑效率接近100%.
文摘以氨基-1,2,4-三唑和2-偕二硝甲基-5-硝基四唑(HDNMNT)为原料,通过中和反应合成出两种新型含能离子盐——2-偕二硝甲基-5-硝基四唑3-氨基-1,2,4-三唑盐(3-ATDNMNT)和2-偕二硝甲基-5-硝基四唑4-氨基-1,2,4-三唑盐(4-ATDNMNT),收率分别为95.4%和96.7%;利用FT-IR、1 H NMR、13C NMR、15 N NMR及元素分析等方法对其结构进行表征;采用量子化学方法计算了3-ATDNMNT和4-ATDNMNT的爆轰性能;在标准状态下(膨胀比为70∶1),利用最小自由能原理,分别计算了两种离子盐在丁羟复合推进剂中的能量性能。结果表明,3-ATDNMNT的爆速和爆压分别为8.587km/s和33.58GPa,4-ATDNMNT的爆速和爆压分别为8.693km/s和34.31GPa。以3-ATDNMNT部分取代丁羟复合推进剂中的AP后,丁羟复合推进剂的理论比冲可达2 635.7N·s/kg。以4-ATDNMNT部分取代丁羟复合推进剂中的AP后,当HTPB、Al、AP及4-ATDNMNT各组分质量分数分别为10%、5%、15%及70%时,获得该丁羟复合推进剂的最高理论比冲为2 677.2N·s/kg。
文摘目的:构建大鼠线粒体转录因子TFAM(A)、线粒体转录因子TFB1M(B1)、线粒体转录TFB2M(B2)及线粒体RNA聚合酶(POLRMT)的质粒标准品,为检测内耳细胞线粒体TFAM、TFB1M、TFB2M、POLRMT的mRNA表达水平做基础。方法:设计特异性引物和探针,提取大鼠内耳组织总mRNA逆转录成c DNA,PCR扩增、纯化目的片段,将纯化产物与p Zero Back/blunt载体重组,提取重组质粒,经测序鉴定后,用实时荧光绝对定量PCR建立标准曲线。结果:测序结果与各目的序列一致,获得良好的标准曲线(R2>0.99)。结论:成功构建了各目的基因的质粒标准品。
