Integrated electro-absorption-modulated distributed feedback laser diodes(EMLs)are attracting much interest in optical communications for the advantages of a compact structure,low power consumption,and high-speed modu...Integrated electro-absorption-modulated distributed feedback laser diodes(EMLs)are attracting much interest in optical communications for the advantages of a compact structure,low power consumption,and high-speed modulation.In integrated EML,the microwave interaction between the distributed feedback laser diode(DFB-LD)and the electro-absorption modulator(EAM)has a nonnegligible influence on the modulation performance,especially at the high-frequency region.In this paper,integrated EML was investigated as a three-port network with two electrical inputs and a single optical output,where the scattering matrix of the integrated device was theoretically deduced and experimentally measured.Based on the theoretical model and the measured data,the microwave equivalent circuit model of the integrated device was established,from which the microwave interaction between DFB-LD and EAM was successfully extracted.The results reveal that the microwave interaction within integrated EML contains both the electrical isolation and optical coupling.The electrical isolation is bidirectional while the optical coupling is directional,which aggravates the microwave interaction in the direction from DFB-LD to EAM.展开更多
We report the simulation and experimental results of 1.3-μm InGaAsP/InP multiple quantum well （MQW） electro-absorption modulators （EAMs）. In this work, the quantum confined Stark effect of the EAM is system- atic...We report the simulation and experimental results of 1.3-μm InGaAsP/InP multiple quantum well （MQW） electro-absorption modulators （EAMs）. In this work, the quantum confined Stark effect of the EAM is system- atically analyzed through the finite element method. An optimized structure of the 1.3-μm InGaAsP/InP QW EAM is proposed for applications in 100 G ethernet. Then 1.3-μm InGaAsP/InP EAMs with f-3dB bandwidth of over 20 GHz and extinction ratio over 20 dB at 3 V bias voltage are demonstrated.展开更多
A 32 Gb/s monolithically integrated electroabsorption modulated laser is fabricated by selective area growth technology. The threshold current of the device is below 13mA. The output power exceeds 10mW at 0V bias when...A 32 Gb/s monolithically integrated electroabsorption modulated laser is fabricated by selective area growth technology. The threshold current of the device is below 13mA. The output power exceeds 10mW at 0V bias when the injection current of the distributed feedback laser is 100mA at 25℃. The side mode suppression ratio is over 50 dB. A 32Gb/s eye diagram is measured with a 3.SVpp nonreturn-to-zero pseudorandom modulation signal at -2.3 V bias. A clearly opening eyediagram with a dynamic extinction ratio of 8.01 dB is obtained.展开更多
A 10Gb/s transmitter module containing an electroabsorption modulator monolithically integrated with a distributed feedback (DFB) semiconductor laser is fabricated using the identical epitaxial layer scheme.Gain-coupl...A 10Gb/s transmitter module containing an electroabsorption modulator monolithically integrated with a distributed feedback (DFB) semiconductor laser is fabricated using the identical epitaxial layer scheme.Gain-coupling mechanism is employed to improve the single mode yield of the DFB laser,while inductively coupled plasma dry etching technique is utilized to reduce the modulator capacitance.The integrated device exhibits a threshold current as low as 12mA and an extinction ratio over 15dB at -2V bias.The small signal modulation bandwidth is measured to be over 10GHz.The transmission experiment at 10Gb/s indicates a power penalty less than 1dB at a bit-error-rate of 10 -12 after transmission through 35km single mode fiber.展开更多
基金This work was supported by the National Key Research and Development Program of China under Grant No.2018YFE0201900the National Natural Science Foundation of China under Grants No.61927821 and No.61875240the Joint Research Fund of Ministry of Education of China under Grant No.6141A02022436.
文摘Integrated electro-absorption-modulated distributed feedback laser diodes(EMLs)are attracting much interest in optical communications for the advantages of a compact structure,low power consumption,and high-speed modulation.In integrated EML,the microwave interaction between the distributed feedback laser diode(DFB-LD)and the electro-absorption modulator(EAM)has a nonnegligible influence on the modulation performance,especially at the high-frequency region.In this paper,integrated EML was investigated as a three-port network with two electrical inputs and a single optical output,where the scattering matrix of the integrated device was theoretically deduced and experimentally measured.Based on the theoretical model and the measured data,the microwave equivalent circuit model of the integrated device was established,from which the microwave interaction between DFB-LD and EAM was successfully extracted.The results reveal that the microwave interaction within integrated EML contains both the electrical isolation and optical coupling.The electrical isolation is bidirectional while the optical coupling is directional,which aggravates the microwave interaction in the direction from DFB-LD to EAM.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61274046,61474111 and 61321063the National High-Technology Research and Development Program of China under Grant No 2013AA014202
文摘We report the simulation and experimental results of 1.3-μm InGaAsP/InP multiple quantum well （MQW） electro-absorption modulators （EAMs）. In this work, the quantum confined Stark effect of the EAM is system- atically analyzed through the finite element method. An optimized structure of the 1.3-μm InGaAsP/InP QW EAM is proposed for applications in 100 G ethernet. Then 1.3-μm InGaAsP/InP EAMs with f-3dB bandwidth of over 20 GHz and extinction ratio over 20 dB at 3 V bias voltage are demonstrated.
基金Supported by the National High-Technology Research and Development Program of China under Grant Nos 2011AA010303and 2012AA012203the National Basic Research Program of China under Grant No 2011CB301702the National Natural Science Foundation of China under Grant Nos 61321063 and 6132010601
文摘A 32 Gb/s monolithically integrated electroabsorption modulated laser is fabricated by selective area growth technology. The threshold current of the device is below 13mA. The output power exceeds 10mW at 0V bias when the injection current of the distributed feedback laser is 100mA at 25℃. The side mode suppression ratio is over 50 dB. A 32Gb/s eye diagram is measured with a 3.SVpp nonreturn-to-zero pseudorandom modulation signal at -2.3 V bias. A clearly opening eyediagram with a dynamic extinction ratio of 8.01 dB is obtained.
文摘A 10Gb/s transmitter module containing an electroabsorption modulator monolithically integrated with a distributed feedback (DFB) semiconductor laser is fabricated using the identical epitaxial layer scheme.Gain-coupling mechanism is employed to improve the single mode yield of the DFB laser,while inductively coupled plasma dry etching technique is utilized to reduce the modulator capacitance.The integrated device exhibits a threshold current as low as 12mA and an extinction ratio over 15dB at -2V bias.The small signal modulation bandwidth is measured to be over 10GHz.The transmission experiment at 10Gb/s indicates a power penalty less than 1dB at a bit-error-rate of 10 -12 after transmission through 35km single mode fiber.
