THE SPECTRAL RADIUS OF UNIFORM HYPERGRAPH DETERMINED BY THE SIGNLESS LAPLACIAN MATRIX

This paper studies the problem of the spectral radius of the uniform hypergraph determined by the signless Laplacian matrix.The upper bound of the spectral radius of a uniform hypergraph is obtained by using Rayleigh principle and the perturbation of the spectral radius under moving the edge operation,and the extremal hypergraphs are characterized for both supertree and unicyclic hypergraphs.The spectral radius of the graph is generalized.

基于RADIUS/EAP的WLAN认证及其安全性分析

介绍了基于RADIUS/EAP协议的IEEE 802.1x无线局域网的接入认证过程与结构,针对无线局域网访问控制具有的三方协作过程特点,分析了无线局域网的安全机制,指出了或者由于协议自身缺陷或者由于不恰当的系统实现或者由于协议恶化,均可以导致有无线局域网的6个方面的安全漏洞,指出了需充分利用RADIUS/EAP分组结构的数据段提供加密认证并且还需设计双门接入的认证机制。最后比较了常见的四种安全接入方案,指出了在不同程度和范围内具有一定的抵御各种攻击的能力。

Radius服务器中EAP认证子系统的设计

无线网络的信息安全问题一直是限制它发展的一个重要因素.解决这个问题的一个办法是在认证服务器中部署EAP认证子系统.Radius是目前应用最广泛的AAA协议,提供用户的认证,授权和计费服务.基于EAP协议,可以在Radius服务器上支持多种不同安全性能的身份验证方法.在Radius服务器上设计了一种EAP认证子系统,该系统支持EAP-MD5、EAP-MSCHAPv2、EAP-TLS、EAP-TTLS、EAP-PEAP五种认证方法,并且具有良好的安全性和可扩展性.

基于EAP/RADIUS的WLAN认证和密钥分配协议

研究了无线局域网的认证机制,描述了EAP/RADIUS协议在IEEE802.1x标准中的消息封装格式,针对基于端口访问控制协议的缺陷,提出一种新的应用于WLAN的认证和密钥分配方案,并设计详细协议流程。该协议基于EAP/RADIUS认证框架,使用服务令牌将认证和授权结合起来,授权校验的同时进行密钥分配,完善了WLAN的访问控制机制。

FreeRADIUS EAP-TLS的应用

结合FreeRADIUS,EAP-TLS,TinyCA技术的研究,通过实践摸索,提供了完整实现FreeRadius EAP-TLS证书管理和认证的配置方法,特别是补充了其他书籍和网络上关于EAP-TLS配置关于CRL设置的缺失。

基于EAP/RADIUS的移动IPv6接入认证研究

对可扩展认证协议(EAP)和远程用户拨入认证系统(RADIUS)协议进行了阐述,给出了基于移动IPv6的AAA(认证、授权、计费)体系架构。针对移动IPv6移动用户接入认证问题,提出了基于EAP/RADIUS的移动IPv6接入认证构架,通过EAP与RADIUS服务器协作的方式实现对移动用户的接入认证。

Rare Bilateral Radius and Ulna Fractures: A Case Report

Introduction: Forearm fractures involving both the radius and ulna, present distinctive challenges in orthopedic trauma management. This case report explores the complexities of a rare case of bilateral fractures, emphasizing the importance of a comprehensive approach for optimal outcomes. Case Presentation: This report presents the case of a 40-year-old motorcyclist who was involved in a road accident and arrived at the emergency department shortly after the incident. Clinical examination revealed closed fractures in both forearms with mild swelling and severe tenderness. Fortunately, no neurovascular issues or compartment syndrome were detected. The patient was administered intravenous fluids and effective pain relief. Forearm splints were applied and the arms were elevated using pillows. Radiographs showed fractures in the right distal radius and ulna, as well as the left mid-shaft radius and ulna. Under general anesthesia, open reduction and internal fixation were per-formed using plates and screws for all four fractures. Postoperatively, the patient’s arms were immobilized and elevated, with gradual recovery during follow-up appointments over six months, eventually achieving full function without complaints. Conclusion: This article highlights the possibility, although infrequent, of bilateral shaft fractures of the ulna and radius. With thorough clinical assessment and radiological investigation, such fractures can be well-defined. The required definitive treatment, which usually involves open reduction and internal fixation, can be performed.

RE-SMOTE:A Novel Imbalanced Sampling Method Based on SMOTE with Radius Estimation

Imbalance is a distinctive feature of many datasets,and how to make the dataset balanced become a hot topic in the machine learning field.The Synthetic Minority Oversampling Technique(SMOTE)is the classical method to solve this problem.Although much research has been conducted on SMOTE,there is still the problem of synthetic sample singularity.To solve the issues of class imbalance and diversity of generated samples,this paper proposes a hybrid resampling method for binary imbalanced data sets,RE-SMOTE,which is designed based on the improvements of two oversampling methods parameter-free SMOTE(PF-SMOTE)and SMOTE-Weighted Ensemble Nearest Neighbor(SMOTE-WENN).Initially,minority class samples are divided into safe and boundary minority categories.Boundary minority samples are regenerated through linear interpolation with the nearest majority class samples.In contrast,safe minority samples are randomly generated within a circular range centered on the initial safe minority samples with a radius determined by the distance to the nearest majority class samples.Furthermore,we use Weighted Edited Nearest Neighbor(WENN)and relative density methods to clean the generated samples and remove the low-quality samples.Relative density is calculated based on the ratio of majority to minority samples among the reverse k-nearest neighbor samples.To verify the effectiveness and robustness of the proposed model,we conducted a comprehensive experimental study on 40 datasets selected from real applications.The experimental results show the superiority of radius estimation-SMOTE(RE-SMOTE)over other state-of-the-art methods.Code is available at:https://github.com/blue9792/RE-SMOTE(accessed on 30 September 2024).

Wind-sand flow simulation and radius optimization of highway embankment under different vertical curve radius

It is of great practical value to explore the correlation between the vertical curve radius of desert highway and the increase of sand accumulation in local lines,and to select the appropriate vertical curve radius for reducing the risk of sand accumulation.In this study,three-dimensional models of desert highway embankments with different vertical curve radii were constructed,and Fluent software was used to simulate the wind-sand flow field and sand accumulation distribution of vertical curve embankments.The results show that:(1)Along the direction of the road,the concave and the convex vertical curve embankments have the effect of collecting and diverging the wind-sand flow,respectively.When the radius of the concave vertical curve is 3000 m,5000 m,8000 m,10000 m and 20000 m,the wind velocity in the middle of the vertical curve is 31.76%,22.58%,10.78%,10.53%and 10.44%,higher than that at both ends.When the radius of the convex vertical curve is 6500 m,8000 m,10000 m,20000 m and 30000 m,the wind velocity at both ends of the vertical curve is 14.06%,9.99%,6.14%,3.22%and 2.41%,higher than that in the middle.The diversion effect also decreases with the increase of the radius.(2)The conductivity of the concave and convex vertical curve embankments with different radii is greater than 1,which is the sediment transport roadbed.The conductivity increases with the increase of radius and gradually tends to be stable.When the radius of the concave and convex vertical curves reaches 8000 m and 20000 m respectively,the phenomenon of sand accumulation is no longer serious.Under the same radius condition,the concave vertical curve embankment is more prone to sand accumulation than the convex one.(3)Considering the strength of the collection and diversion of the vertical curve embankment with different radii,and the sand accumulation of the vertical curve embankment in the desert section of Wuma Expressway,the radius of the concave vertical curve is not less than 8000 m,and the radius of the convex vertical curve is not less than 20000 m,which can effectively reduce the sand accumulation of the vertical curve embankment.In the desert highway area,the research results of this paper can provide reference for the design of vertical curve to ensure the safe operation of desert highway.

Nuclear charge radius predictions by kernel ridge regression with odd-even effects

The extended kernel ridge regression(EKRR)method with odd-even effects was adopted to improve the description of the nuclear charge radius using five commonly used nuclear models.These are:(i)the isospin-dependent A^(1∕3) formula,(ii)relativistic continuum Hartree-Bogoliubov(RCHB)theory,(iii)Hartree-Fock-Bogoliubov(HFB)model HFB25,(iv)the Weizsacker-Skyrme(WS)model WS*,and(v)HFB25*model.In the last two models,the charge radii were calculated using a five-parameter formula with the nuclear shell corrections and deformations obtained from the WS and HFB25 models,respectively.For each model,the resultant root-mean-square deviation for the 1014 nuclei with proton number Z≥8 can be significantly reduced to 0.009-0.013 fm after considering the modification with the EKRR method.The best among them was the RCHB model,with a root-mean-square deviation of 0.0092 fm.The extrapolation abilities of the KRR and EKRR methods for the neutron-rich region were examined,and it was found that after considering the odd-even effects,the extrapolation power was improved compared with that of the original KRR method.The strong odd-even staggering of nuclear charge radii of Ca and Cu isotopes and the abrupt kinks across the neutron N=126 and 82 shell closures were also calculated and could be reproduced quite well by calculations using the EKRR method.

Revisiting the Electron Radius in Light of Length Contraction

In previous work, the electron radius was identified as the “actual electron radius.” However, this is more accurately described as the electron radius at rest. This study reexamines the electron with an emphasis on the electron radius under motion, incorporating the effects of length contraction. The findings suggest that the radius is subject to Lorentz contraction, which has interesting implications for relativistic effects at the subatomic level.

Anisotropy of Trabecular Bone from Ultra-Distal Radius Digital X-Ray Imaging: Effects on Bone Mineral Density and Age

Background: When applied to trabecular bone X-ray images, the anisotropic properties of trabeculae located at ultra-distal radius were investigated by using the trabecular bone scores (TBS) calculated along directions parallel and perpendicular to the forearm. Methodology: Data from more than two hundred subjects were studied retrospectively. A DXA (GE Lunar Prodigy) scan of the forearm was performed on each subject to measure the bone mineral density (BMD) value at the location of ultra-distal radius, and an X-ray digital image of the same forearm was taken on the same day. The values of trabecular bone score along the direction perpendicular to the forearm, TBSx, and along the direction parallel to the forearm, TBSy, were calculated respectively. The statistics of TBSx and TBSy were calculated, and the anisotropy of the trabecular bone, which was defined as the ratio of TBSy to TBSx and changed with subjects’ BMD and age, was reported and analyzed. Results: The results show that the correlation coefficient between TBSx and TBSy was 0.72 (p BMD and age was reported. The results showed that decreased trabecular bone anisotropy was associated with deceased BMD and increased age in the subject group. Conclusions: This study shows that decreased trabecular bone anisotropy was associated with decreased BMD and increased age.

Hemiarthroplasty for irreparable distal radius fractures in the elderly:A comprehensive review

BACKGROUND Elderly patients maintaining functional independence can now be candidates for primary wrist hemiarthroplasty to manage acute irreparable distal radius fractures(DRFs).However,further investigation with long-term follow-up is required to validate these initial findings.AIM To review the literature on the outcomes of distal radius hemiarthroplasty with available implants to assess its viability as a treatment option.METHODS A comprehensive review of the literature was conducted using electronic databases,including PubMed,Medline,and Scopus.The search terms employed were"distal radius fracture","hemiarthroplasty","wrist arthroplasty",and related terminology.The search was restricted to articles published in English from 1980 until June 2023.Inclusion criteria encompassed cases or case series of DRF treated with hemiarthroplasty,providing clinical or radiographic outcomes,and published in peer-reviewed journals.RESULTS A total of 2508 articles from PubMed and 883 from Scopus were identified initially.Following screening and removal of duplicates,13 articles met the inclusion criteria.These articles,predominantly clinical retrospective studies,provided insights into hemiarthroplasty outcomes,including functional improvements and complications.Hemiarthroplasty was a treatment option for complex DRF,particularly those cases with severe comminution,intraarticular involvement,or severe osteoporosis.Functional outcomes demonstrated improvements in pain relief,wrist mobility,and grip strength,with variability across studies.Complications included implant loosening,infection,nerve injury,and stiffness,with varying incidence rates influenced by surgical techniques and implant choice.Long-term outcomes were inadequately documented,warranting further research.CONCLUSION Hemiarthroplasty is a promising treatment for irreparable DRF in the elderly.Long-term outcomes and complications require further study.

RADIUS服务器防重播攻击策略研究

为提高网络信息访问的安全性,有意识减少用户在访问RADIUS服务器时可能存在被重播攻击的风险,本文探讨了RADIUS网络服务器简单有效的防御策略。通过用黑名单机制加固RADIUS服务器,来防范对RADIUS服务器的重播攻击。该策略可有效减小恶意数据的攻击的影响,提高RADIUS服务器的安全性和健壮性。

Optimal Shape Factor and Fictitious Radius in the MQ-RBF:Solving Ill-Posed Laplacian Problems

To solve the Laplacian problems,we adopt a meshless method with the multiquadric radial basis function(MQRBF)as a basis whose center is distributed inside a circle with a fictitious radius.A maximal projection technique is developed to identify the optimal shape factor and fictitious radius by minimizing a merit function.A sample function is interpolated by theMQ-RBF to provide a trial coefficient vector to compute the merit function.We can quickly determine the optimal values of the parameters within a preferred rage using the golden section search algorithm.The novel method provides the optimal values of parameters and,hence,an optimal MQ-RBF;the performance of the method is validated in numerical examples.Moreover,nonharmonic problems are transformed to the Poisson equation endowed with a homogeneous boundary condition;this can overcome the problem of these problems being ill-posed.The optimal MQ-RBF is extremely accurate.We further propose a novel optimal polynomial method to solve the nonharmonic problems,which achieves high precision up to an order of 10^(−11).

Spatial Distribution Characteristics and Coverage Rate of Commercial Facilities in 15-minute Radius Livelihood Service Circles of Chunshu Street

Building a 15-minute radius livelihood service circle from the needs of residents is a topdown process of optimizing urban layout and promoting high-quality development implemented by the government.In September 2022,Xicheng District of Beijing served as a national pilot of the 15-minute radius livelihood service circle.Based on the data of POI,urban walking network and building outline,this paper studies the coverage of commercial service facilities in the 15-minute radius livelihood service circle of Chunshu Street by using kernel density analysis and urban network analysis tools.The research shows that the commercial facilities are concentrated in Zhuangsheng Square and Dazhalan commercial district.There are large gaps in housekeeping and couriers logistics facilities,which need to be further improved.

Case study of performance assessment of overlapping shield tunnels with a small curve radius

Due to the network planning of subways and their surrounding structures,increasingly more overlapping shields with a small curve radius have been constructed.A newly constructed upper tunnel partly overlaps a lower one,leading to the extremely complex uplift of the lower tunnel caused by the construction of a new tunnel.Based on the shield-driven project that runs from the Qinghe Xiaoyingqiao Station to the Qinghe Station in Beijing,which adopts the reinforcement measures of interlayer soil grouting and steel supports on site,in this study,the uplift pattern of the lower tunnel and the stress characteristics of steel supports were investigated through numerical simulations and on-site monitoring.The study results show that among all tunnel segments,thefirst segment of the shield witnesses a maximum uplift displacement that increases with the horizontal space between tunnels.On using either interlayer soil grouting or steel-ring bracing reinforcement,the uplift of the tunnel lining exceeds the control value;by contrast,when these two measures are jointly applied,the uplift of the tunnel lining does not exceed a maximum value of 4.87 mm,which can satisfy the requirements of deformation control.Under these two joint measures,the soil strength between two stacked shield tunnels can be enhanced and the uplift deformation can be restricted with the interlayer soil grouting.Also,the segmental deformation and overall stability of the existing tunnel can be controlled with the temporary steel supports.The deformation of circumferential supports and segments is closely related to each other,and the segmental uplift is controlled by H-shaped steel supports.With the increase in the horizontal space between twin shields,the effect of the construction would gradually weaken,accompanied by a gradual reduction of the stresses of steel supports.Thesefindings provide a valuable reference for the engineering design and safe construction of overlapping shield tunnels with a small curve radius.K E Y W O R D Sfield monitoring,numerical simulation,overlapping shields,small curve radius,steel support stress,uplift of tunnel lining Highlights•A project of twin overlapping shield tunnels with a small curve radius is introduced.•Protective measures of soil grouting and H-shaped steel supports are proposed.•A 3D model in view of overcutting soils,grouting,and steel supports is established.•The performance of the overlapping shield tunnel with a small curve radius is evaluated.

A Spectral Radius Condition for a Graph to Have(a,b)-Parity Factors

Let a,b be two positive integers such that a≤b and a≡b(mod 2).We say that a graph G has an(a,b)-parity factor if G has a spanning subgraph F such that dF(v)≡b(mod 2)and a≤dF(v)≤b for all v∈V(G).In this paper,we provide a tight spectral radius condition for a graph to have(a,b)-parity factors.

Binding Energy, Root-Mean Square Radius and Magnetic Dipole Moment of the Nucleus 6Li

In this work, we have applied the translation invariant shell model with number of quanta of excitations N=2,4,6,8and 10 to define the ground-state eigenenergies and their corresponding normalized eigenstates, the root mean-square radius, and the magnetic dipole moment of the nucleus 6Li. We have computed the necessary two-particle orbital fractional parentage coefficients for nuclei with mass number A=6and number of quanta of excitations N=10, which are not available in the literature. In addition, we have used our previous findings on the nucleon-nucleon interaction with Gaussian radial dependencies, which fits the deuteron characteristics as well as the triton binding energy, root-mean square radius and magnetic dipole moment. The numerical results obtained in this work are in excellent agreement with the corresponding experimental data and the previously published theoretical results in the literature.

基于RADIUS和数字证书的无线网络接入认证技术研究

随着网络技术的发展,无线网络接入认证技术的应用越来越广泛。通过远程认证拨入用户服务(Remote Authentication Dial In User Service,RADIUS)和数字证书配合使用,可以实现较为安全完善的无线网络接入认证。介绍RADIUS和数字证书的相关概念,概述使用RADIUS和数字证书进行无线网络接入时的网络拓扑与接入认证过程,给出RADIUS代理服务器、认证服务器以及数字证书的配置方法同时,给出验证该无线网络接入认证技术的方法,也是Linux客户端进行网络接入认证的方法。通过搭建RADIUS网络接入环境,使用数字证书作为认证凭证,实现客户端对无线网络的接入认证。