Numerical investigation of effect of eccentric decoupled charge structure on blasting-induced rock damage

Eccentric decoupling blasting is commonly used in underground excavation.Determination of perimeter hole parameters(such as the blasthole diameter,spacing,and burden)based on an eccentric charge structure is vital for achieving an excellent smooth blasting effect.In this paper,the Riedel-Hiermaier-Thoma(RHT)model was employed to study rock mass damage under smooth blasting.Firstly,the parameters of the RHT model were calibrated by using the existing SHPB experiment,which were then verified by the existing blasting experiment results.Secondly,the influence of different charge structures on the blasting effect was investigated using the RHT model.The simulation results indicated that eccentric charge blasting has an obvious pressure eccentricity effect.Finally,to improve the blasting effect,the smooth blasting parameters were optimized based on an eccentric charge structure.The overbreak and underbreak phenomena were effectively controlled,and a good blasting effect was achieved with the optimized blasting parameters.

Torsionally Coupled Response Control of Offshore Platform Structures Using Circular Tuned Liquid Column Dampers

In this paper, the control performance is investigated of Circular Tuned Liquid Column Dampers (CTLCD) over torsional response of offshore platform structures excited by ground motions. Based on the equation of motion for the CTLCD-structure system, the optimal control parameters of CTLCD are given through some derivations on the supposition that the ground motion is a stochastic process. The influence of systematic parameters on the equivalent damping ratio of the structures is analyzed with purely torsional vibration and translational-torsional coupled vibration, respectively. The results show that the Circular Tuned Liquid Column Damper (CTLCD) is an effective torsional response control device.

Studies on structural vibration control with MR dampers using μGA

A new approach to reducing the seismic response of spatial structures with magneto-theological （MR） dampers is presented in this paper. The Genetic Algorithm with small populations （μGA） is used to optimize the control for the MR dampers to reduce structural vibration, which is difficult to achieve using classical optimal control. The advantages of μGA are the use of global properties and that fewer conditions are required to obtain the optimal function. Numerical results demonstrate the effectiveness of the proposed method in reducing the seismic response of structures.

A new design of automatic vertical drilling tool

In order to effectively improve penetration rates and enhance wellbore quality for vertical wells,a new Automatic Vertical Drilling Tool(AVDT)based on Eccentric Braced Structure(EBS)is designed.Applying operating principle of rotary steering drilling,AVDT adds offset gravity block automatic induction inclination mechanism.When hole straightening happens,tools take essentric moment to be produced by gravity of offset gravity lock to control the bearing of guide force,so that well straightening is achieved.The normal tool's size of the AVDT is designed as 215.9 mm,other major components'sizes are worked out by the result of theoretical analysis,including the offset angle of EBS.This paper aims to introduce the structure,operating principle,theoretical analysis and describe the key components'parameters setting of the AVDT.