Geology and mineralization of the Dongping supergiant alkalic-hosted Au-Te deposit(>100 t Au)in Northern Hebei Province,China:A review

The Dongping deposit is the largest alkalic-hosted gold deposit in China containing>100 t of Au.This paper presents a new understanding for Dongping ore system,based on the previous studies.The mineralization originally occurred at 400-380 Ma,simultaneous with emplacement of the Shuiquangou alkaline complex,and was overprinted by the hydrothermal activity in the Yanshanian.Isotope compositions of ores indicate metals of the deposit are mainly provided by the Shuiquangou complex.Ore-forming fluids are characterized by increasing oxygen fugacity and decreasing sulfur fugacity,while tellurium fugacity increased in the Stage II-2 and decreased in Stage II-3.These systematic changes are closely related to the processes of mineral precipitation and fluid evolution.Sulfide precipitation from Stage Ⅰ to Stage Ⅱ was triggered by fluid boiling,which leads to the precipitation of Pb-Bi-Te,due to decrement of sulfur fugacity.Condensation of gas phase containing high concentration of H_2Te leads to precipitation of Te-Au-Ag minerals and native tellurium.Based on these hypotheses,this paper present a polyphase metallogenic model as follow.During the Devonian,fluids were released from alkaline magmas,which carried ore-forming materials form the surrounding rocks and precipitate the early ores.During the Jurassic-Cretaceous,fluorine-rich fluids exsolved from highly factionated Shangshuiquan granite,which extracted and concentrated Au from the Shuiquangou complex and the Sanggan Group metamorphic rocks,and finally formed the Dongping gold deposit.

EFFECT OF DEPOSITIONS CONDITION ON THE MICROSTRUCTURE OF C/C MINICOMPOSITE

C/C minicomposites were manufactured by CVI with propylene as resource gas and Ar as diluent gas. Effects of deposition temperature, the flow rate of propylene and total system pressure on the microstructure of C/C minicomposites were investigated. Deposition conditions are as follows: deposition temperature ranging from 870℃ to 1000℃, the flow rate of propylene from 10 to 60 ml/min, and total system pressure from 3 to 16kPa. The results revealed: The deposit distributes non uniformly as increasing the deposition temperature or total system pressure. The effect of the flow rate of propylene on the distribution of deposit observes different principles at different deposition temperatures. If the deposition temperature rises to 900℃, the deposit distributes more non uniformly as increasing the flow rate of propylene. The morphology of deposit varies with deposition condition, such as smooth, droplet like or spike like. Deposition mechanism varies with deposition condition. It can be surface reaction nucleation and growth, heterogeneous nucleation of liquid droplet on carbon fiber or gas borne nuclei growth. With the principle of nuclei growth of crystal and the method of phenomenology, the changes of deposition mechanism and the morphology of pyrolytic carbon with deposition condition were explained successfully. The effect of deposition condition on deposit homogeneity stems from the effect of deposition condition on the CVI kinetics and the deposition mechanism of pyrolytic carbon.

A Study on Palaeogeography and Metallogenic Conditions of Early Carboniferous Bauxite Deposits of Old Weathered Crust in Guizhou, Sichuan, Hunan and Hubei Provinces

There are four subtypes. namely, Ia, Ib, Ic and Id of the Early Carboniferous bauxite deposits of the old weathered crust type in Guizhou, Sichuan, Hunan and Hubei provinces. They are all distributed in the Upper Yangtze old land. As a result of the Hunan-Guizhou palaeo-faulting, the crust on the northern side of the fault was uplifted and became land, thus suffering denudation. The bauxitic substances left in the weathered crust evolved and were reworked into bauxite. On the other hand, the crust on the southern side of the fault sank and remained to be part of an ocean. The bauxite deposits of Ia and Ib subtypes were formed by in-situ enrichment of residual bauxitic substances in the weathered crust of the old land, but bauxite deposits of Ic and Id subtypes resulted from transportation, accumulation and sedimentation of allothogenous bauxitic substances on the weathered crust of the old land. The processes of transportation may be distinguished as dry transportation and wet transportation, both of which proceeded under atmospheric conditions.

Physicochemical Conditions during the Formation of Dalingkou Ag-Pb-Zn Deposit,Zhejiang Province

On the basis of mineral paragenesis and the chemistry and homogenization temperatures of fluid inclusions,the physicochemical parameters were calculated for the formation of the Dalingkou Ag-Pb-Zu deposit in Zhejiang.From the early to the late stage of mineralization the ore-forming temperature veriation was found to be 298.5 ℃→267.0℃→217.6℃→167.3℃,with a corresponding pH change of 3.0-5.8→6.1→6.7→5.0→7.3.The pressure changed from 403.8to 128.5atm,and logfS2-9.9→-11.2→<-15;logfO2<-44→-45.6--42.6→>-44.2;and logf CO2 around -1.55.In conjunction with geological observations.the deposit is considered to be of meso-epithermal origin,i.e.,it was formed after continental volcanic-subvolcanic activity.The major factors affecting ore precipitation are the decreasing temperature and the increasing pH of ore-forming solutions.

Study on the geological conditions of metallogenesis of the Shazi large-scale anatase deposit in Qinglong County, Guizhou Province

The Shazi large-scale anatase deposit in Qinglong County, Guizhou Province, has been discovered recently and now is under exploration. Investigations show that the orebodies mostly occur at the top of the karst unconformity of the Middle Permian Maokou Formation strata and at the bottom of the Emeishan basalt. And the following three prerequisites should be satisfied for the formation of the deposit: 1) there must be the material source of anatase; 2) there must be weekly alkaline media and low-tempeature and low-pressure conditions; 3) there was no high-temperature and high-pressure environment subsequently for the transformation of anatase into rutile. In the Emeishan basalt of western Guizhou, the element Ti mostly entered the silicon-oxygen tetrahedra of picrite in heterovalent isomorphism(Ti4++Al3+→Mg2++Si4+). When volcanic ejecta resultant from strong eruption of the Emeishan basalt magma fell into water, picrite was usually dissociated to chlorite. Thus, the element Ti4+ in the picrite could be released from the silicon-oxygen tetrahedraa of picrite into water, and conbined with oxygen in the water to form Ti O2. This paper has proved that this deposit, enriched in anatase, discovered recently at Shazi, Qinglong Country, Guizhou Province, is a residual-deluvial-type deposit. Its genesis can be explained as follows. Volcanic clastics formed at the early stage of strong eruption of the Emeishan basalt magma were chemically deposited to form anatase in the low-temperature, low-pressure and weekly alkaline waters in the karst depressions at the top of the Maokou Formation(limestone) strata. The anatase was then dissociated owing to weathering and leaching during the Quaternary and the anatase was further enriched to form the residual-deluvial-type anatase ore deposit.

Geochemical characteristics of Holocene sediments from Chuadanga district, Bangladesh: Implications for weathering, climate, redox conditions, provenance and tectonic setting

The present research deals with the geochemical characteristics of the Holocene sediments from Alamdanga area, Chuadanga district, Bangladesh. Main goals of the study are to delineate source rock characteristics, degree of chemical weathering and sorting processes and behavior of redox conditions during deposition of the sediments. Geochemical characteristics of the sediments show comparatively a wide variation in accordance with stratigraphy in their major element contents(e.g. Si O2 69.46–82.13, Al2O3 2.28–8.88 in wt%), reflecting the distinctive provenance and in part an unstable period in terms of tectonic activity. Geochemical classification of the sediments shows mostly sub-arkose with few sub-litharenites. Some major and trace elements display comprehensible correlation with Al2O3 confirming their possible hydraulic fractionation. The chemical index of alteration(CIA*), W* index, index of compositional variability(ICV), plagioclase index of alteration(PIA*) values and the ratio of Si O2/Al2O3, suggest low degrees of chemical weathering in the source areas as well as immature to moderately mature the sediments. The sediments suggest semi-arid climatic trends within oxic deltaic depositional conditions during the Holocene, at 3–12 ka. Whole rock geochemistry and discrimination diagrams demonstrate the continental signature derivatives, which might have been derived from the felsic to intermediate igneous rocks(granitic plutonic rocks) as well as from quartzose sedimentary/metamorphic provenance. These typical sources are present in a vast region of the Himalayan belt and catchment areas of Ganges. The tectonic setting of the sediments demarcates typically passive margin with slightly continental arc system.

A new type of micro-disseminated gold deposits in association with diabase found in Yunnan and Guizhou provinces and Guangxi Zhuang Autonomous Region——Their geological characteristics and metallogenic conditions

With the continuous development of gold ore prospecting and exploration in recent years a new type of micro-disseminated gold deposits have been found in the regions of Southwest Guizhou Province and Northwest Guangxi Zhuang Autonomous Region,with the orebodies directly occurring in diabase or in the contact zone between diabase and strata.The orebodies are strictly controlled by fault structures.The discovery of this type of gold deposits has brought about new prospects for gold ore prospecting in the Yunnan-Guizhou-Guangxi Golden Triangle region.From the preliminary analysis of the geological characteristics of the Qiaoxiang gold deposit in Wangmo County,in combination with the results of research work in the adjacent areas in recent years,this paper roughly described the geological characteristics and metallogenic conditions of this type of gold ore deposits with an attempt to make more and more geologists pay enough attention to this type of gold ore deposits,so as to promote gold ore prospecting in Guizhou Province to develop toward a variety of types of gold deposits in all round way.

MARINE SOURCE ROCKS AND THEIR DEPOSITIONAL CONDITIONS OF MESOZOIC—CENOZOIC IN THE GAMBA—TINGRE BASIN,SOUTH TIBET:ORGANIC GEOCHEMICAL STUDY

The Gamba—Tingri basin lies in south Tethys Himalaya subzone. It is 400km in length from east to west, and 30～50km in width from north to south. The basin is mainly made up of marine Mesozoic and Lower Cenozoic, i.e., Jurassic, Cretaceous, and Lower Tertiary. Its total strata are more than 3100m in thickness. The passive continental margin of the India plate developed during Jurassic—Cretaceous after a Triassic rifting stage. Collision took place between the India and the Eurasian plate during the latest Cretaceous and earliest Tertiary (Liu and Einsele, 1994), which resulted in a Tertiary residual basin.The Jurassic stratigraphic system in the Gamba—Tingri basin were not carried out until recently (Wan et al., 1999), which is divided into three formations, i.e.., Pupuga Fm., Nieniexiongla Fm., and Menkadun Fm.. The Cretaceous and Tertiary stratigraphic system is after Wan (1985) and Xu et al.(1990), which the Cretaceous is divided into six formations: Dongsan Fm., Chaqiela Fm., Lengqingle Fm., Xiawuchubo Fm., Jiubao Fm., and Zongshan Fm, whereas the Tertiary is divided into Jiabula Fm. Zongpu Fm., and Zhepure Fm.

METALLOGENIC CONDITIONS OF GOLD-BEARING SKARN DEPOSITS ALONG THE MIDDLE-LOW ER REACHES OF THE YANGTZE RIVER

The authors discussed the metallogenic conditions of goldbearing skarn deposits along the middlelower Yangtze River reaches. Gold was enriched in mantleoriginated magmas while copper was enriched in crustoriginated magmas. So the enrichment of gold in skarn deposits was decided by the M/C ratios of the intrusive rocks. The distribution of these deposits was controlled not only by the localization of the intrusive rocks which were decided by Mesozoic Eradeveloped largescaled and deepseated faults, but also by the favorable stratigraphic horizons.

Influence of Deposition Conditions on the Crystal Structure of MoS_2 Coating

MoS2 coatings were prepared using an unbalanced bipolar pulsed DC （direct current） magnetron sputtering apparatus under different targets, cathode current densities, power modes and bias voltages. The morphology, structure and growth characteristics of MoS2 coatings were observed and identified respectively by scanning electron microscopy, X-ray diffractometry and mass spectrometry. The results show that MoS2 coatings evolve with the （002） basal plane parallel to the surface by using cold pressed target with lower density, lower cathodic current density, bipolar pulse DC power and minus bias voltage, whereas the coatings deposited under hot pressed target, higher cathodic current density, simple DC power and positive bias voltage have the （002） basal plane perpendicular to the surface. The influence of deposition conditions on the crystal structure of MoS2 coating is implemented by altering its growth rate and the energy of sputtering-deposition particles.

Physicochemical Conditions of Differential Mineralization of Au and As in Gold Deposits,Southwest Guizhou Province, China

The conditions under which gold and arsenic are enriched separately during mineralization in gold deposits in southwestern Guizhou Province were described and the thermodynamic calculations gave: 200-150℃ at 400×10-6-300×10 6 Pa （corresponding to a depthbetween 1 .6 km and 1 .2 km）; lgfO2-40 t0 - 35 Pa; lgfs2- 20 to -16 Pa; pH 5. 0 -4. 2 and Eh - 0. 53 V.

Influence of ignition condition on the growth of silicon thin films using plasma enhanced chemical vapour deposition

The influences of the plasma ignition condition in plasma enhanced chemical vapour deposition （PECVD） on the interfaces and the microstructures of hydrogenated microcrystalline Si （μc-Si：H） thin films are investigated. The plasma ignition condition is modified by varying the ratio of Sill4 to H2 （RH）. For plasma ignited with a constant gas ratio, the time-resolved optical emission spectroscopy presents a low value of the emission intensity ratio of Ha to Sill＊ （Iuα//SiH＊） at the initial stage, which leads to a thick amorphous incubation layer. For the ignition condition with a profiling RH, the higher IHα/ISiH＊ values are realized. By optimizing the RN modulation, a uniform crystallinity along the growth direction and a denser αc-Si：H film can be obtained. However, an excessively high IRα/ISIH＊ may damage the interface properties, which is indicated by capacitance-voltage （C-V） measurements. Well controlling the ignition condition is critically important for the applications of Si thin films.

Geochemical Conditions of Metallization of the Lijiagou Pb-Zn Deposit, Gansu Province

The Lijiagou Pb-Zn deposit in Gansu Province is a syngenetic hydrothermal-depositonal and meta-morphosed hydrothermal weakly-reworked stratabound ore deposit. The metallogenic physicochemical condi-tions of the deposit are thoroughly dealt with in this paper according to its different mineralization stages.Based on the systematic study of metallogenic material sources, it is considered that the ore-forming metals, oresulphur and water of mineralizing fluids are mainly derived from the basement, reduction sulphur of marinesulfate and infiltrating heated meteoric water and partially recharged sea water, respectively. Finally, themetallogenic model of this deposit is established.

Spectroscopic Features and Formation Conditions of Sphalerite in the Lead-Zinc Deposit, Guangdong,China

Electron paramagnetic resonance spectra, absorption spectra, cathodoluminescence spectra and infrared spectra of sphalerite from the Lechang remoulded sedimentary lead-zinc deposit have been studied so as to provide microscopic evidence for the formation conditions and mineralization stages of the deposit as well as the geochemical processes of mineralization. On the basis of thermodynamic calculations, the stable fields of sphalerite from different mineralization stages were determined and are shown in logfs_2-logfo_2 diagrams; furthermore. the physico-chemical conditions of mineralization and the properties of mineralization solutions are discussed so that reliability of the genetic information provided by the spectroscopy of sphalerite may also be verified. It is suggested that the temperature and pH value of the mineralization system decrease, and so do the fugacities of O_2, S_2, H_2. and H_2S and the activities of HS^- and SO_4^(2-) from the early to late stages of minerahzation.

PRELIMINARY STUDY ON THE ORE-FORMING CONDITIONS OF THE Au-Pb-QUARTZ VEIN TYPE ORE DEPOSIT,CHINA

There are few Au-Pb-Quartz vein type ore deposits in other countries except China. It might be related to the geohistory and geotectonic background. However, this kind of ore deposit has an important economical significance in China. Its formation is due to the dis-tinctive geological conditions of china. Wendong Au-Pb-Quartz type ore deposit including Wenyu and Dongchuang in Xiaoqinling gold field is the most typical. It is a polygenetic and compound ore deposit, Jintongcha and other deposits lying to the west of it in Xiaoqinling area are Au-Pb-Quartz vein type ore deposits. Others of this area lying to the east of Jintongcha are Au-Quartz vein type. This phenomenon stems from the zonnal distribution of minernal de-posits and the different development of the two major minernalzation stages. The results ob-tained from the fluid inclusion research have supported this inference.

Study on the Physical and Chemical Conditionsof Ore Formation of Hetai Ductile Shear Zone-Hosted Gold Deposit and Discovery of Melt Inclusions

The Hetai ductile shear zone-hosted gold deposit occurs in the deep-seated fault mylonite zone of the Sinian-Silurian metamorphic rock series. In this study there have been discovered melt inclusions, fluid-melt inclusions and organic inclusions in ore-bearing quartz veins of the ore deposit and mylonite for the first time. The homogenization temperatures of the various types of inclusions are 160℃, 180-350℃, 530℃ and 870℃ for organic inclusions, liquid inclusions, two-phase immiscible liquid inclusions and melt inclusions, respectively. Ore fluid is categorized as the neutral to basic K\++-Ca\+\{2+\}-Mg\+\{2+\}-Na\++-SO\+\{2-\}\-4-HCO\+-\-3-Cl\+- system. The contents of trace gases follow a descending order of H\-2O>CO\-2>CH\-4> (or <) H\-2>CO>C\-2H\-2>C\-2H\-6>O\-2>N\-2. The concentrations of K\++, Ca\+\{2+\}, SO\+\{2-\}\-4, HCO\+-\-3, Cl\+-, H\-2O and C\-2H\-2 in fluid inclusions are related to the contents of gold and the Au/Ag ratios in ores from different levels of the gold deposit.This is significant for deep ore prospecting in the region. Daughter minerals in melt inclusions were analyzed using SEM. Quartz, orthoclase, wollastonite and other silicate minerals were identified. They were formed in different mineral assemblages. This analysis further proves the existence of melt inclusions in ore veins. Sedimentary metamorphic rocks could form silicate melts during metamorphic anatexis and dynamic metamorphism, which possess melt-solution characteristics. Ore formation is related to the multi-stage forming process of silicate melt and fluid.

The Forming Conditions of and Ore-searching Direction for B, Mg,Pb, Zn and Au Deposits in the Liaoji Proterozoic Rift

The Liaoji Proterozoic rift is an inter-intracontinenatl rift developed from Archean granite-greenstone tectonic regime and contains many important mineral deposits of U, B, magnesite, Pb-Zn, Au, Ag, Co and P. These deposits were formed as the result of late mobilization, transportation and concentfation of the previously enriched ore-forming mate- rials in several ore-bearing formations formed during the rift stage. So the metallogeny of these deposits in the rift shows both inheritance and new generation of the ore-forming materials. In future ore-searching practice, attentions should be paid on the studies of the ore-bearing formations in the rift, on the multiple stages of metallogeny and and on multiple derivations of the ore-forming materials.

渤海湾盆地大港探区明化镇组多级别层序格架及砂岩型铀成矿条件

渤海湾盆地位于世界两大砂岩型铀矿成矿带之一的欧亚成矿带内,具有砂岩型铀成矿的潜力。大港探区测井结果显示明化镇组发育着大范围的高伽马异常,为探究其铀成矿条件并指明找矿方向,建立了大港探区明化镇组多级别层序格架,并开展了层序内沉积微相研究,对氧化还原带进行了划分。研究表明,依据测井曲线特征和岩石性质,将明化镇组划分为五级层序,铀异常主要见于明化镇组下段上亚段和上段下亚段2个五级层序内。其沉积微相主要发育曲流河河道、边滩、溢岸沉积和泛滥平原4种,其中铀异常主要发育于边滩、河道砂体。2个层序内的氧化还原带可划分出氧化带、过渡带和还原带,其中铀异常主要位于过渡带内。叠合沉积微相、氧化还原带展布、铀异常展布和油气分布等特征,认为油气富集带附近的过渡带中,边滩和河道微相砂体中均具有良好的铀成矿条件。综合分析认为,港东港西地区西7-14-2、西1603、港3-6-20和港8-15-1井区是大港探区砂岩型铀矿的有利找矿位置,研究结果为渤海湾盆地砂岩型铀矿勘探提供了启示意义。

勐野井钾盐矿床中自生黏土矿物特征及其意义

云南思茅盆地勐野井钾盐矿床中含有不同类型的碎屑物:与钾盐脉共存的灰绿色泥砾(“绿钾”)、与钾盐脉共存的棕红色泥砾(“红钾”)和浅黄色泥岩。本文对不同类型碎屑物中黏土矿物进行了X射线衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM)分析。通过SEM和TEM观察到黏土颗粒为薄片状六边形,晶型较好,自形程度较高,认为其为自生成因。XRD结果表明,“红钾”中黏土矿物主要由绿泥石和伊利石组成;“绿钾”和浅黄色泥岩除了伊利石和绿泥石外,还含有“似累托石”型黏土矿物。“红钾”中伊利石结晶度指数(°Δ2θ)介于0.327~0.452之间,而“绿钾”和浅黄色泥岩则介于0.221~0.283之间,表明“绿钾”和浅黄色泥岩中伊利石结晶程度要比“红钾”中伊利石高。“绿钾”和“红钾”物质来源和所经历的地质过程相同,因此,不同类型碎屑物中的黏土矿物组合和伊利石的结晶度差异表明自生伊利石的形成并非只受到温度和压力影响。其他研究表明“绿钾”还原性更强,pH值更低并且细菌活动更活跃,很可能促进了自生伊利石的形成。