Enhancing visual security: An image encryption scheme based on parallel compressive sensing and edge detection embedding

A novel image encryption scheme based on parallel compressive sensing and edge detection embedding technology is proposed to improve visual security. Firstly, the plain image is sparsely represented using the discrete wavelet transform.Then, the coefficient matrix is scrambled and compressed to obtain a size-reduced image using the Fisher–Yates shuffle and parallel compressive sensing. Subsequently, to increase the security of the proposed algorithm, the compressed image is re-encrypted through permutation and diffusion to obtain a noise-like secret image. Finally, an adaptive embedding method based on edge detection for different carrier images is proposed to generate a visually meaningful cipher image. To improve the plaintext sensitivity of the algorithm, the counter mode is combined with the hash function to generate keys for chaotic systems. Additionally, an effective permutation method is designed to scramble the pixels of the compressed image in the re-encryption stage. The simulation results and analyses demonstrate that the proposed algorithm performs well in terms of visual security and decryption quality.

Machine learning algorithm partially reconfigured on FPGA for an image edge detection system

Unmanned aerial vehicles(UAVs)have been widely used in military,medical,wireless communications,aerial surveillance,etc.One key topic involving UAVs is pose estimation in autonomous navigation.A standard procedure for this process is to combine inertial navigation system sensor information with the global navigation satellite system(GNSS)signal.However,some factors can interfere with the GNSS signal,such as ionospheric scintillation,jamming,or spoofing.One alternative method to avoid using the GNSS signal is to apply an image processing approach by matching UAV images with georeferenced images.But a high effort is required for image edge extraction.Here a support vector regression(SVR)model is proposed to reduce this computational load and processing time.The dynamic partial reconfiguration(DPR)of part of the SVR datapath is implemented to accelerate the process,reduce the area,and analyze its granularity by increasing the grain size of the reconfigurable region.Results show that the implementation in hardware is 68 times faster than that in software.This architecture with DPR also facilitates the low power consumption of 4 mW,leading to a reduction of 57%than that without DPR.This is also the lowest power consumption in current machine learning hardware implementations.Besides,the circuitry area is 41 times smaller.SVR with Gaussian kernel shows a success rate of 99.18%and minimum square error of 0.0146 for testing with the planning trajectory.This system is useful for adaptive applications where the user/designer can modify/reconfigure the hardware layout during its application,thus contributing to lower power consumption,smaller hardware area,and shorter execution time.

A Distributed Ant Colony Optimization Applied in Edge Detection

With the rise of image data and increased complexity of tasks in edge detection, conventional artificial intelligence techniques have been severely impacted. To be able to solve even greater problems of the future, learning algorithms must maintain high speed and accuracy through economical means. Traditional edge detection approaches cannot detect edges in images in a timely manner due to memory and computational time constraints. In this work, a novel parallelized ant colony optimization technique in a distributed framework provided by the Hadoop/Map-Reduce infrastructure is proposed to improve the edge detection capabilities. Moreover, a filtering technique is applied to reduce the noisy background of images to achieve significant improvement in the accuracy of edge detection. Close examinations of the implementation of the proposed algorithm are discussed and demonstrated through experiments. Results reveal high classification accuracy and significant improvements in speedup, scaleup and sizeup compared to the standard algorithms.

Color Edge Detection Using Multidirectional Sobel Filter and Fuzzy Fusion

A new model is proposed in this paper on color edge detection that uses the second derivative operators and data fusion mechanism.The secondorder neighborhood shows the connection between the current pixel and the surroundings of this pixel.This connection is for each RGB component color of the input image.Once the image edges are detected for the three primary colors:red,green,and blue,these colors are merged using the combination rule.Then,the final decision is applied to obtain the segmentation.This process allows different data sources to be combined,which is essential to improve the image information quality and have an optimal image segmentation.Finally,the segmentation results of the proposed model are validated.Moreover,the classification accuracy of the tested data is assessed,and a comparison with other current models is conducted.The comparison results show that the proposed model outperforms the existing models in image segmentation.

Flash-based in-memory computing for stochastic computing in image edge detection

The“memory wall”of traditional von Neumann computing systems severely restricts the efficiency of data-intensive task execution,while in-memory computing(IMC)architecture is a promising approach to breaking the bottleneck.Although variations and instability in ultra-scaled memory cells seriously degrade the calculation accuracy in IMC architectures,stochastic computing(SC)can compensate for these shortcomings due to its low sensitivity to cell disturbances.Furthermore,massive parallel computing can be processed to improve the speed and efficiency of the system.In this paper,by designing logic functions in NOR flash arrays,SC in IMC for the image edge detection is realized,demonstrating ultra-low computational complexity and power consumption(25.5 fJ/pixel at 2-bit sequence length).More impressively,the noise immunity is 6 times higher than that of the traditional binary method,showing good tolerances to cell variation and reliability degradation when implementing massive parallel computation in the array.

Design of multilayer cellular neural network based on memristor crossbar and its application to edge detection

Memristor with memory properties can be applied to connection points(synapses)between cells in a cellular neural network(CNN).This paper highlights memristor crossbar-based multilayer CNN(MCM-CNN)and its application to edge detection.An MCM-CNN is designed by adopting a memristor crossbar composed of a pair of memristors.MCM-CNN based on the memristor crossbar with changeable weight is suitable for edge detection of a binary image and a color image considering its characteristics of programmablization and compactation.Figure of merit(FOM)is introduced to evaluate the proposed structure and several traditional edge detection operators for edge detection results.Experiment results show that the FOM of MCM-CNN is three times more than that of the traditional edge detection operators.

An Active Image Forgery Detection Approach Based on Edge Detection

Recently, digital images have become the most used data, thanks tohigh internet speed and high resolution, cheap and easily accessible digitalcameras. We generate, transmit and store millions of images every second.Most of these images are insignificant images containing only personal information.However, in many fields such as banking, finance, public institutions,and educational institutions, the images of many valuable objects like IDcards, photographs, credit cards, and transaction receipts are stored andtransmitted to the digital environment. These images are very significantand must be secured. A valuable image can be maliciously modified by anattacker. The modification of an image is sometimes imperceptible even by theperson who stored the image. In this paper, an active image forgery detectionmethod that encodes and decodes image edge information is proposed. Theproposed method is implemented by designing an interface and applied on atest image which is frequently used in the literature. Various tampering attacksare simulated to test the fidelity of the method. The method not only notifieswhether the image is forged or not but also marks the tampered region ofthe image. Also, the proposed method successfully detected tampered regionsafter geometric attacks, even on self-copy attacks. Also, it didn’t fail on JPEGcompression.

Normalized edge detection, and the horizontal extent and depth of geophysical anomalies

Edge detection is an image processing technique for finding the boundaries of objects within images. It is typically used to interpret gravity and magnetic data, and find the horizontal boundaries of geological bodies. Large deviations between model and true edges are common because of the interference of depth and errors in computing the derivatives; thus, edge detection methods cannot provide information about the depth of the source. To simultaneously obtain the horizontal extent and depth of geophysical anomalies, we use normalized edge detection filters, which normalize the edge detection function at different depths, and the maxima that correspond to the location of the source. The errors between model and actual edges are minimized as the depth of the source decreases and the normalized edge detection method recognizes the extent of the source based on the maxima, allowing for reliable model results. We demonstrate the applicability of the normalized edge detection filters in defining the horizontal extent and depth using synthetic and actual aeromagnetic data.

Robust edge detection based on stationary wavelet transform

By combining multiscale stationary wavelet analysis with fuzzy c-means, a robust edge detection algorithm is presented. Based on the translation invafiance built in multiscale stationary wavelet transform, components in different transformed sub-images corresponding to a pixel are employed to form a feature vector of the pixel. All the feature vectors are classified with unsupervised fuzzy c-means to segment the image, and then the edge pixels are checked out by the Canny detector. A series of images contaminated with different intensive Gaussian noises are used to test the novel algorithm. Experiments show that fairly precise edges can be checked out robustly from those images with fairly intensive noise by the proposed algorithm.

AN ALGORITHM OF EDGE DETECTION BASED ON ENTROPY OPERATOR

This paper presents an algorithm of edge detection in image processing. A new entropy operator and threshold estimation technique are effectively proposed. The algorithm overcomes some drawbacks of Shiozaki operator. It not only has higher speed but also can extract the edge better. Finally, an example of 2D image is given to demonstrate the usefulness and advantages of the algorithm.

A new fuzzy edge detection algorithm

Based upon the maximum entropy theorem of information theory, a novel fuzzy approach for edge detection is presented. Firstly, a definition of fuzzy partition entropy is proposed after introducing the concepts of fuzzy probability and fuzzy partition. The relation of the probability partition and the fuzzy c-partition of the image gradient are used in the algorithm. Secondly, based on the conditional probabilities and the fuzzy partition, the optimal thresholding is searched adaptively through the maximum fuzzy entropy principle, and then the edge image is obtained. Lastly, an edge-enhancing procedure is executed on the edge image. The experimental results show that the proposed approach performs well.

A new approach for salt dome detection using a 3D multidirectional edge detector

Accurate salt dome detection from 3D seismic data is crucial to different seismic data analysis applications. We present a new edge based approach for salt dome detection in migrated 3D seismic data. The proposed algorithm overcomes the drawbacks of existing edge-based techniques which only consider edges in the x （crossline） and y （inline） directions in 2D data and the x （crossline）, y （inline）, and z （time） directions in 3D data. The algorithm works by combining 3D gradient maps computed along diagonal directions and those computed in x, y, and z directions to accurately detect the boundaries of salt regions. The combination of x, y, and z directions and diagonal edges ensures that the proposed algorithm works well even if the dips along the salt boundary are represented only by weak reflectors. Contrary to other edge and texture based salt dome detection techniques, the proposed algorithm is independent of the amplitude variations in seismic data. We tested the proposed algorithm on the publicly available Netherlands offshore F3 block. The results suggest that the proposed algorithm can detect salt bodies with high accuracy than existing gradient based and texture-based techniques when used separately. More importantly, the proposed approach is shown to be computationally efficient allowing for real time implementation and deployment.

Application of Tobacco Leaf Edge Detection with Tracking Bug Method

Tobacco leaf shapes including the length,width,area,perimeter and roundness parameters and so on,Only obtain exact boundaries of the leaf information to calculate a large number of leaf parameters.This paper introduces the classical edge detection Methods,bug method is used to track the boundaries of tobacco leaf extractly.The test shows that the algorithm has a good edge extraction capability.

PHOTO-ELECTRIO MEASURING SYSTEM FOR TOOL EDGE DETECTION BY THE TEOHNOLOGY OF COMPUTER DYNAMIO DISPLAY MOVING IMAGE

This paper describes a technology of dynamic display moving image by computer monitor,which is initially used in the design of tool detection system. The paper presents the hardware and software principie and edge detection process. The way of marking edge point coordinates and stability of moving image also is analyzed. The method reforms the conventional design of the 2-D vision detection system. Moreover,it facilitates the design of the systematic mechanical construction,is convenient to compile instrument systemsoftware,and realizes to detect and track display image simultaneously. By the work,the tool detection system is improved to practical application.

Edge detection in the potential field using the correlation coefficients of multidirectional standard deviations

Most edge-detection methods rely on calculating gradient derivatives of the potential field, a process that is easily affected by noise and is therefore of low stability. We propose a new edge-detection method named correlation coefficient of multidirectional standard deviations（CCMS） that is solely based on statistics. First, we prove the reliability of the proposed method using a single model and then a combination of models. The proposed method is evaluated by comparing the results with those obtained by other edge-detection methods. The CCMS method offers outstanding recognition, retains the sharpness of details, and has low sensitivity to noise. We also applied the CCMS method to Bouguer anomaly data of a potash deposit in Laos. The applicability of the CCMS method is shown by comparing the inferred tectonic framework to that inferred from remote sensing（RS） data.

Image edge detection based on nonsubsampled contourlet transform and mathematical morphology

A novel algorithm for image edge detection is presented. This algorithm combines the nonsubsampled contourlet transform and the mathematical morphology. First, the source image is decomposed by the nonsubsampled contourlet transform into multi-scale and multi-directional subbands. Then the edges in the high-frequency and low-frequency sub-bands are respectively extracted by the dualthreshold modulus maxima method and the mathematical morphology operator. Finally, the edges from the high- frequency and low-frequency sub-bands are integrated to the edges of the source image, which are refined, and isolated points are excluded to achieve the edges of the source image. The simulation results show that the proposed algorithm can effectively suppress noise, eliminate pseudo-edges and overcome the adverse effects caused by uneven illumination to a certain extent. Compared with the traditional methods such as LoG, Sobel, and Carmy operators and the modulus maxima algorithm, the proposed method can maintain sufficient positioning accuracy and edge details, and it can also make an improvement in the completeness, smoothness and clearness of the outline.

Image edge detection based on beamlet transform

Combining beamlet transform with steerable filters, a new edge detection method based on line gradient is proposed. Compared with operators based on point local properties, the edge-detection results with this method achieve higher SNR and position accuracy, and are quite helpful for image registration, object identification, etc. Some edge-detection experiments on optical and SAR images that demonstrate the significant improvement over classical edge operators axe also presented. Moreover, the template matching result based on edge information of optical reference image and SAR image also proves the validity of this method.

Edge Detection of River in SAR Image Based on Contourlet Modulus Maxima and Improved Mathematical Morphology

To cope with the problems that edge detection operators are liable to make the detected edges too blurry for synthetic aperture radar(SAR)images,an edge detection method for detecting river in SAR images is proposed based on contourlet modulus maxima and improved mathematical morphology.The SAR image is firstly transformed to a contourlet domain.According to the directional information and gradient information of directional subband of contourlet transform,the modulus maximum and the improved mathematical morphology are used to detect high frequency and low frequency sub-image edges,respectively.Subsequently,the edges of river in SAR image are obtained after fusing the high frequency sub-image and the low frequency sub-image.Experimental results demonstrate that the proposed edge detection method can obtain more accurate edge location and reduce false edges,compared with the Canny method,the method based on wavelet and Canny,the method based on contourlet modulus maxima,and the method based on improved(ROEWA).The obtained river edges are complete and clear.

Memristive network-based genetic algorithm and its application to image edge detection

This paper proposes a mem-computing model of memristive network-based genetic algorithm(MNGA)by building up the relationship between the memristive network(MN)and the genetic algorithm(GA),and a new edge detection algorithm where image pixels are defined as individuals of population.First,the computing model of MNGA is designed to perform mem-computing,which brings new possibility of the hardware implementation of GA.Secondly,MNGA-based edge detection integrating image filter and GA operator deployed by MN is proposed.Finally,simulation results demonstrate that the figure of merit(FoM)of our model is better than the latest memristor-based swarm intelligence.In summary,a new way is found to build proper matching of memristor to GA and aid image edge detection.

Feature fusion method for edge detection of color images

A novel feature fusion method is proposed for the edge detection of color images. Except for the typical features used in edge detection, the color contrast similarity and the orientation consistency are also selected as the features. The four features are combined together as a parameter to detect the edges of color images. Experimental results show that the method can inhibit noisy edges and facilitate the detection for weak edges. It has a better performance than conventional methods in noisy environments.