Analysis of Aluminum Alloy Double-Pulse MIG Welding Arc Signal Characteristics Based on Broadband Mode Decomposition

Welding voltage and current in arc signals are directly related to arc stability and welding quality.Process experiments with different parameters were organized according to the orthogonal experimental design method by constructing an aluminum alloy double-pulse metal inert gas(MIG)welding arc electric signal test platform.The data acquisition system of the aluminum alloy MIG welding process was established to obtain real-time arc signal information reflecting the welding process.The aluminum alloy’s collected double-pulse arc current signals are decomposed adaptively by broadband mode decomposition(BMD).The direct current(DC)signal,pulse signal,distortion signal,ripple signal,and noise signal are separated and extracted,and the composite multiscale fuzzy entropy(CMFE)is calculated for the component set of the electrical signal.The experimental results show that the current waveform obtained by the double-pulse MIG welding current signal is consistent with the corresponding weld forming diagram.Simultaneously,the composite multiscale fuzzy entropy is calculated for the arc characteristic parameters.The rationality of matching process parameters and arc stability of aluminum alloy’s double-pulse MIG welding were evaluated.

应用Arc/Info建立湖北省区域稳定性评价空间数据库

以Arc/Info为基本工具 ,以遥感信息为获取、更新数据库数据的主要信息源 ,结合前人地学资料 ,建立了湖北省区域稳定性评价空间数据库 ,阐述了该空间数据库的内容、功能。

应用Arc/Info建立湖北省区域稳定性评价空间数据库

GIS是获取、检索、分析、处理空间数据的数据库管理系统 ,是研究空间对象的有力工具。本文利用 GIS软件 Arc/Info为基本工具 ,以遥感数据作为获取、更新数据库数据的重要信息源 ,结合前人的地学资料 ,建立了湖北省区域稳定性评价空间数据库 ,阐述了该空间数据库的内容、功能、应用和意义。

RIEMANN BOUNDARY VALUE PROBLEM WITH RESPECT TO THE PERTURBATION OF BOUNDARY CURVE TO BE AN OPEN ARC

By dint of the stability of Cauchy-type integral with kernel density of class H＊ for an open arc, this paper discusses the stability of the solution of Riemann boundary value problem with respect to the perturbation of boundary curve to be an open arc.

Approximate entropy——a new statistic to quantify arc and welding process stability in short-circuiting gas metal arc welding

Based on the phase state reconstruction of welding current in short-circuiting gas metal arc welding using carbon dioxide as shielding gas, the approximate entropy of welding current as well as its standard deviation has been calculated and analysed to investigate their relation with the stability of electric arc and welding process. The extensive experimental and calculated results show that the approximate entropy of welding current is significantly and positively correlated with arc and welding process stability, whereas its standard deviation is correlated with them negatively. A larger approximate entropy and a smaller standard deviation imply a more stable arc and welding process, and vice versa. As a result, the approximate entropy of welding current promises well in assessing and quantifying the stability of electric arc and welding process in short-circuiting gas metal arc welding.

Study on Evaluation Method of Aluminum alloy Pulse MIG Welding Stability Based on Arc Voltage Probability Density

Bring forward a new analytical method in order to evaluate the stability of the process of aluminum alloy pulsed MIG welding. The ratio of the first and the second peak in arc voltage signal probability density was selected to evaluate aluminum alloy pulse MIG welding stability. By calculating the arc voltage signal probability density from 80 sets of welding experiments, the ratio of the two peaks in arc voltage probability in every set was captured. And the evaluation system of aluminum alloy pulse MIG welding stability was established. The smaller the ratio of peaks in arc voltage signal probability density is, the better the stability of the welding will be;the bigger the ratio of peaks in arc voltage signal probability density is, the poorer the stability of the welding will be.

Approximate entropy analysis of arc stability in VPPA-GMAW hybrid welding

Variable polarity plasma arc-gas metal arc welding(VPPA-GMAW)integrates the advantages of VPPA and GMAW,and it is particularly applied to weld thick-plates aluminum alloys.High-speed camera and data acquisition system were used to analyze the arc shape and the welding process electrical signal.According to the analysis of arc swing amplitude and the approximate entropy of arc voltage signal denoised by wavelet threshold method,the influence of VPPA frequency on the arc stability was studied.The results show that the approximate entropy of GMAW arc voltage decreases with the increase of VPPA frequency in a certain range,and the stability of the hybrid arc is significantly improved.The spectral analysis shows that the arc stability is reduced due to the resonance effect between the VPPA and the GMAW arc when the VPPA frequency closes to the GMAW arc pulse frequency.The results are helpful to understand hybrid welding mechanism and the selection of welding process parameters.

Study on the measureto improve the arcstabilization in smaller current welding for the variable polarity GTAW powersource

The variable polarity power source which incorporates a constant current power and a secondary inverter does not need special apparatus for stabilizing arc. The pulse for stabilizing arc is created by the circuit structure itself. The paper analyzes the principle of acquiring the pulse, provides the better method to improve the arc stabilization under smaller welding current. Test shows the arc is highly stable , and the process has no high frequency electromagnetic interference, which is suitable for automatic welding case.

An analysis of the dynamic resistance and the instantaneous energy of the CO_2 arc welding process

A self-developed welding dynamic arc wavelet analyzer was adopted to analyze and assess the welding process of two CO2 arc welding machines. The experimental results indicate that the instantaneous energy can reflect the influence of the welding current and voltage on dynamic arc characteristic synthetically. Through calculating and analyzing the instantaneous energy, the energy during arc ignition and short circuit in CO2 welding process can be confirmed rationally, thus the foundation for the accurate design and control of the welding current and voltage can be provided. By reducing the ripple disturbance of the dynamic resistance, avoiding peak current and voltage waveform , and enhancing the transition frequency of short circuit suitably, the stability of the welding arc and the weld appearance can be improved.

THE GASDYNAMIC AND ELECTROMAGNETIC FACTORS AFFECTING THE POSITION OF ARC ROOTS IN A TUBULAR ARC HEATER

The gasdynamic and electromagnetic factors affecting the position of arc roots in a tubular arc heater are analyzed.Magnitudes of the various factors are estimated through numerical modelling,and the overall action on the arc assessed.It is found that the actions on the arc in the rear electrode can be balanced in a stable manner and the arc root can be stabilized at a certain axial position.In the front electrode,the various factors cannot be balanced,and the are root can only stay within the electrode through the mechanism of recurrent shunting.These conclusions agree with experimental observations.

Research on the arc length and droplet transition control strategy for the full digital pulse MIG welding power supply

Arc length stability and droplet transition consistency are key factors for the pulse metal inert gas （MIG） welding quality. A new control strategy is proposed based on pulse current waveform adjustment to stabilize the welding process. After sufficient analysis of the droplet transition process, key current waveform parameters are refined that can affect the welding quality greatly. In order to achieve the optimal nonlinear control of parameters, the fuzzy controller is designed successfully with two inputs and three outputs in field programmable gate array （ FPGA ）, which occupies fewer resources than PID controller and has higher control performance. Experimental results show that the arc length can be adjusted fast in full range of welding current, the welding process is stable, the droplet transition has good consistency, and the welding quality is perfect.

A study of arc stability of basic electrode in view of uniform design method

In order to develop a basic electrode with low fume and good usability, a uew slag system has been designed after analyzing several basic electrode slag systems. Then in view of uniform design method, arranging the experiment points by it, the influenced laws of the uew system coating compouents on the arc stability had been searched. In the formula, niue coating compouents were taken as independent variables and they were divided into six levels in all twenty-four experiments. The arc stability was taken as function and taken down the data when welding and then put them into the computer to be processed statistically. The analysis results give the mathematical model and trend diagrams between independent variables and the function. They indicate that the effects of many coating compouents on the arc stability are in the mutual form. The mutual effects between CaCO3 and BaF2, BaF2 and BaCO3 , increases the arc stability separately. While the mutual effects between CaF2 and iron powder, the square item of iron powder itself decreases the arc stability separately.

Stability of Cauchy Singular Integral with Its Kernel Density Belong to H＊ for an Open Arc

The authors examine the relation between the perturbed Cauchy singular integral with its kernel density belong to H＊ and unperturbed one and show that the Cauchy singular integral is stable under perturbation of the curve of integration.

Time-Frequency Entropy Analysis of Arc Signal in Non-Stationary Submerged Arc Welding

The use of time-frequency entropy to quantitatively assess the stability of submerged arc welding process considering the distribution features of arc energy is reported in this paper. Time-frequency entropy is employed to calculate and analyze the stationary current signals, non-stationary current and voltage signals in the submerged arc welding process. It is obtained that time-frequency entropy of arc signal can be used as arc stability judgment criteria of submerged arc welding. Experimental results are provided to confirm the effectiveness of this approach.

Analysis of Effects of the Arc Voltage on Arc Discharges in a Cathode Ion Source of Neutral Beam Injector

A hot cathode bucket ion source is used for the EAST（experimental advanced superconducting tokamak）neutral beam injector.The thermal electrons emitted from the surface of the cathode are extracted and accelerated by the electric field formed by the arc voltage,which is applied between the arc chamber of the ion source and the cathode.This paper analyzes the effects of arc voltage on the arc discharge in a hot cathode high current ion source.

Arc Stability Characterization of Double Coated Electrodes for Hardfacing

The aim of this work is to establish the influence of the relative position of the alloy charge C-Cr-Mn in the structure of the coating of rutile electrodes for hardfacing,on the operational behavior(arc stability).For this,three variants of electrodes with similar chemical composition are elaborated in the metallic core and the coating,differentiating only in the relative position that occupies the alloy charge(C-Cr-Mn)in the structure of the coating:internal,external and homogeneous.For the development of the research,a completely random design is used.The operative characterization of the electrodes is performed in terms of the arc stability.In conclusion,it can be seen that the position of the alloy load influences the operation behavior(stability of the arc).The variant of internal alloy charge in the coating presents the better arc stability performance.

挖掘机液压混合动力系统跟踪控制研究

由于挖掘机混合动力系统参数的不确定性和系统的非线性给挖掘机的跟踪控制带来了巨大的困难。对此,构建了挖掘机液压混合动力系统模型,并采用改进的自适应鲁棒控制(ARC)实现挖掘机液压混合动力系统的跟踪控制。根据挖掘机液压混合动力系统,对液压系统、挖掘机动力学和发动机进行数学建模。利用线性稳定反馈控制规律,采用改进的自适应鲁棒控制,使挖掘机液压混合动力系统具有足够大的反馈增益。最后对斗杆、动臂和铲斗的倾角进行跟踪仿真实验,给出了系统模型位置和速度的跟踪误差,并与PI控制进行比较分析。结果表明:相比于PI控制,ARC控制下的斗杆、动臂和铲斗倾角的最大振幅波动率和倾角的波动范围都有所降低,且回转位置和速度的跟踪误差超调较小。说明采用ARC控制的挖掘机混合动力系统控制方法,能够更好的补偿系统模型的非线性,具有较好的控制稳定性以及跟踪精度。

P-GMAW起弧过程特征分析及稳定性判别方法

脉冲熔化极气体保护焊(pulsed gas metal arc welding,P-GMAW)起弧过程易产生不稳定现象,会严重影响电弧传感焊缝跟踪精度.针对这一问题,对摆动电弧窄间隙P-GMAW不稳定起弧过程的成因进行了研究,发现送丝速度对起弧过程稳定性具有重要影响.通过对电弧图像与电信号特征进行对比分析,提取了表征电弧稳定性的电信号特征变量;为减小变量冗余性和过拟合,采用最大似然估计法筛选并提取了8个变量,并通过主成分分析法(principal component analysis,PCA)对变量进行融合,提取了方差贡献率最高的前两个主成分;根据因子载荷发现,相比熔滴过渡阶段和基值阶段,脉冲峰值阶段是电弧更易发生不稳定现象的阶段.结合提取的主成分变量与二分类Logistic回归模型建立了起弧过程电弧稳定性判别模型.通过受试者工作特征(receiver operating characteristic,ROC)曲线得到了模型的最佳阈值.结果表明,该模型对脉冲稳定性判别准确率达到了80%以上,表明模型具有良好的判别性能.该模型对提高窄间隙高低跟踪精度、保证焊接质量具有一定应用价值.

变极性等离子弧焊技术发展及其在航天制造领域应用现状

变极性等离子弧(VariablePolarityPlasmaArc,VPPA)焊是一种高效的铝合金和镁合金焊接方法,其主要优势在于等离子电弧具有高能量密度,可以在焊接时穿透熔池形成小孔,大幅度降低焊接变形和残余应力,提高焊接质量。了解熔池小孔行为、电弧物理特性和控制方法对于优化和提高焊接过程的稳定性至关重要。本文综述了VPPA焊接技术发展的最新情况,对VPPA焊接过程信息的检测研究为深刻认识焊接稳定性机理提供了有力保障,尤其是利用X射线成像系统观测熔融金属流动的研究,对提升VPPA穿孔熔池物理本质的认识做出了重要贡献。此外,针对不同位置VPPA焊接的研究增加了这一焊接工艺的灵活性,由VPPA焊接衍生的多种拓展工艺拓宽了该焊接方法的适用范围。VPPA穿孔焊接技术以其焊接变形小、焊后无缺陷、单面焊接双面一次成形等优势,成为航空航天领域铝合金中厚板材焊接制造的优选工艺。

高频脉冲微TIG焊接电弧基值效应研究

为了探索微TIG焊接的焊接电流下限,研制了一种高频脉冲微TIG焊接电源,利用脉冲基值电弧电特性的改善提高焊接稳定性。通过电弧电流、电压波形,分析了电弧的电压滞后性,探讨了脉冲频率对脉冲电弧基值效应的影响,并进一步对零基值脉冲TIG进行了研究。结果表明,高频脉冲下的微电弧基值电压较稳态电弧大幅下降,更有利于维持微电弧的燃烧;在基值电流为0 A的条件下高频脉冲电弧也可维持燃烧,平均焊接电流可低至0.5 A,极限0基值时间与脉冲电流大小呈正相关。对于微细漆包线和端柱的微型工件连接,零基值脉冲微TIG焊获得了较好的焊接效果。