Experimental Study on Vortex-Induced Vibration of Rough Risers with Coupling Interference Effect Under Side-by-Side Arrangement

A vortex-induced vibration(VIV)experiment of rough risers with coupling interference effect under a side-by-side arrangement was carried out in a wave-current combined flume.The roughness of the riser was characterized by arranging different specifications of surface attachments on the surface of the riser.Rough risers with three different roughnesses were arranged side by side with smooth risers to explore the VIV response of the riser under the combined action of roughness and interference effect,and to reveal the coupling mechanism between roughness and interference effect.The experimental results show that,compared with that of a smooth riser,the VIV of a rough riser under the coupling interference effect has a wider"lock-in"region,and the displacement decreases more significantly at a high reduced velocity,which is more likely to excite higher-order modes and frequency responses.In addition,the displacement response and frequency response of the smooth riser are not significantly affected by wake interference from the rough riser,which is caused by the decrease of the wake region due to the delay of the boundary layer separation point of the rough riser.

Experimental Study on Vortex-Induced Vibration of Rough Risers Coupling with Interference Effect in Tandem Arrangement

In order to study the response law of vortex-induced vibration(VIV)of marine risers under the combined action of roughness and interference effects,and to reveal the coupling mechanism of roughness and interference effects on the riser,a VIV experiment of rough risers in tandem arrangement was conducted in a wave−current combined flume.The experiment characterized the risers’roughness by arranging different specifications of attachments on the surface of the risers.Three rough risers with different roughness and smooth risers were arranged in tandem arrangement,with the rough risers arranged downstream.The experimental results indicate that the suppression of the attachments on the downstream risers’vibration are more significant both in the CF and IL directions as the reduced velocity increases.For the downstream riser,the amplitude response of rough riser is more significantly weakened compared with the smooth one at high reduced velocity.For the upstream risers,changes in the roughness and spacing ratio have an impact on their‘lock-in’region.When the roughness of downstream risers is relatively large(0.1300)and the spacing between risers is small(S/D=4.0),the reduced velocity range of‘lock-in’region in the CF direction of upstream risers is obviously expanded,and the displacement in the‘lock-in’region is severer.

Experimental Study on Vortex-Induced Vibration of Marine Riser Model with Coupling Interference Effect Under Combined Internal and External Flow

A partition model of interference efficiency was constructed to study the coupling interference effect under combined internal and external flow.The concept of“internal flow efficiency”,“velocity ratio”and“interference efficiency”were introduced to quantify the effect of internal flow and interference,and reveal the coupling mechanism among internal flow,external flow and interference effect.The results showed that the dynamic response of risers under variable angles was significantly different after considering the effect of internal flow.When the external flow velocity was smaller than 0.25 m/s,the vibration of risers was promoted by the internal flow.With the increase of external flow velocity,the effect of internal flow was weakened and the dynamic response of riser mainly depended on the external flow and interference effect.Under the effect of different internal flow,the interference efficiency had similar change trend.The interference effect amplified the complex secondary flow effect inside the riser,making the dynamic response of riser complex and random.In this paper,the overlap area and subdivision criterion of interference effect were constructed within the range of experimental velocity ratio,and the change curve of interference efficiency was obtained with an average meaning,which may have important practical meaning.

Interference effect on the liquid-crystal-based Stokes polarimeter

The Stokes polarimeter based on liquid crystal variable retarders(LCVRs)is envisaged as a promising novel technique for polarization measurement in space applications due to the inherent advantage of eliminating the need for conventional rotating polarizing optics and increasing the measuring speed.However,the intrinsic multi-beam interference in LCVRs limits its polarization accuracy by several percent.How to eliminate the influence of the interference effect becomes an urgent issue for the liquid-crystal-based Stokes polarimeter.The present study introduces a simplified but effective interference model based on the thin-film optics and polarized light theory to simulate the relationship between the interference effect of the LCVRs-based Stokes polarimeter and the polarization accuracy.The simulation results show that the transmittance variation of LCVR with the derived voltage is caused by multi beam interference between the indium tin oxide(ITO)film and the liquid crystal within LCVR,which produces a few percent of instrumental polarization.The instrumental polarization is about 0.01 and different for different wavelengths.An optimization method was proposed to reduce the instrumental polarization to 0.002,effectively improving the polarization sensitivity of the Stokes polarimeter limited by the interference.In addition,an experimental setup was built up to measure and analyze the influence of the interference effect of the LCVRs-based Stokes polarimeter on the polarization accuracy before and after the optimization.The experiment results are in good agreement with the simulation.

Numerical simulation of mean interference effects for the interfering buildings with different heights

The mean wind-induced interference effects between two high-rise buildings,in which the interfering buildings have different heights,were numerical simulated in the terrain roughness of B and D types by the Reynolds stress equation model(RSM)of fluent.The results are in good agreement with those of the wind tunnel test.Influences of the relative arrangement of two buildings,the height of the interfering buildings and the terrain roughness upon the mean interference effects were analyzed,and the space distributions of IFCPs on the principal building under tandem arrangement were studied.The results indicate that the lower interfering buildings can always bring larger interference factors comparing to the higher ones under tandem arrangement except that the height is larger than 1.25h,and the heights' influence on the mean interference effects will increase as the reduced spacing of two buildings.The influence of heights will be little under stagger arrangement.

Experimental Study on Vortex-Induced Vibration Coupling Wake Interference of Multi-Riser Groups with Sensitive Spacing

The“riser group−fluid between risers”is taken as the carrier,and the experiment on vortex-induced vibration of tandem riser groups coupling interference effect under sensitive spacing is performed.The least-square method is used to linearly fit the reduced velocity and main frequency,and the rule of Strouhal numbers is analyzed.Each mode is separated based on the mode decomposition theory,and the mode conversion mechanism is also explored.The concept of“interference efficiency”is introduced to study the dynamic characteristics and response evolutions of different riser groups.The results show that the wake shielding effect widely exists in tandem riser groups,and the interference effect of midstream and downstream risers on their upstream risers is significantly lower than that of upstream risers on midstream and downstream risers.The trajectories of midstream and downstream risers lag behind their upstream risers due to multiple shadowing effects,the vibration frequency range of downstream riser is widened and the dominant frequency is extremely unstable.Compared with the isolated riser,wake interference suppresses the vibration dis-placement of the midstream and downstream risers in the in-line direction,and enhances the displacement of upstream and midstream risers in the cross-flow direction.The interference effect of the fluid between risers at low velocities is stronger than that at higher velocities,and the cross-flow displacements of upstream risers are always in the interference enhancement region.It is urgent to pay attention to the cross-flow displacement of upstream and midstream risers in tandem riser groups considering the safety design.

Interference effects of two and three super-tall buildings under wind action

Most previous investigations on interference effects of tall buildings under wind actions focused on the wind induced interference effects between two buildings,and the interference effects of three or more buildings have seldom been studied so far due to the huge workload involved in experiments and data processing.In this paper,mean and dynamic force/response interference effects and peak wind pressure interference effects of two and three tall buildings,especially the three-building configuration,are investigated through a series of wind tunnel tests on typical tall building models using high frequency force balance technique and wind pressure measurements.Furthermore,the present paper focuses on the effects of parameters,including breadth ratio and height ratio of the buildings and terrain category,on the interference factors and derives relevant regression results for the interference factors.

Self-Mixing Interference Effects in LD Pumped Multi-Mode Solid-State Laser

Based on the effective structure of the self-mixing interference effects,a general model for the self-mixing interference effects in the LD pumped solid-state laser has been established for the first time.The numerical simulation of the self-mixing interference signal has been done,the results show that when the external cavity length is integral times of 1/2,1/3,2/3,1/4,3/4 of the effective cavity length,the intensity of the self-mixing interference signals reach maximum in value.While that of single mode laser is integral times of half of the effective cavity length,the measuring precision of displacement of single mode laser is λ/2.A conclusion can be drawn from the above results that the measuring precision of displacement of multi-mode laser is higher than that of single mode laser.

Wind?Induced Interference Effect Between Newly?Built Cooling Tower and Existing Cooling Tower

Disturbance effect is one of the important factors for wind damage to large cooling towers.Existing studies on the wind-induced interference of cooling tower groups are aimed at the same size and the lack of wind-induced interference effects between cooling towers of different sizes.With the background of the additional cooling tower project at Shandong Luxi Power Plant in China,the rigid body pressure wind tunnel test is carried out to obtain 194 conditions for the three combinations of the existing four-tower combination(small size),the new two-tower combination(large size)and the six-tower combination surface wind pressure distribution.Numerical simulation of the surrounding flow field of the cooling tower group with the most unfavorable interference condition of the six-tower combination is conducted using the computational fluid dynamics(CFD)method.Based on this,the characteristics of the average and pulsating wind pressure distribution of the cooling tower surface under the six-tower combination are mainly studied,and the load interference coefficients of the large-sized cooling tower and the small-sized cooling tower under the three tower group combinations are compared.The velocity flow field and vorticity changes around the cooling tower group at unfavorable wind angles are analyzed,and the wind-induced interference mechanism between cooling tower groups of different sizes is mainly refined.Research shows that the interference effect between such cooling tower groups of different sizes is much larger than that of cooling tower groups of the same size,which is specifically manifested as the enhancement effect of small-sized cooling towers and the shielding effect of large-sized cooling towers.The interference coefficient of large-sized cooling tower groups increases by 28%,and the interference coefficient of small-sized cooling tower groups decreases by 6.4%.The airflow acceleration caused by the pinch effect between small-sized cooling tower groups has an adverse effect on large-sized cooling towers and can significantly increase the magnitude of local wind load.The shielding effect of large-sized cooling towers can reduce the overall wind load of small-sized cooling towers.The research conclusions can provide the basis of wind load value design for wind resistance design of such large cooling tower addition projects.

Tunneling of Bose-Einstein condensate and interference effect in a harmonic trap with a Gaussian energy barrier

The tunneling effect of Bose-Einstein condensate （BEC） in a harmonic trap with a Gaussian energy barrier is studied in this paper. The initial condensate evolves into two separate moving condensates after the tunneling time under certain conditions. The interference pattern between the two moving condensates is given as a comparison and as a further demonstration of the existence of the global phase.

Interference effects on the photoionization cross sections between two neighbouring atoms:nitrogen as an example

Interference effects on the photoionization cross sections between two neighbouring atoms are considered based on the coherent scattering of the ionized electrons by the two nuclei when their separation is less than or comparable to the de Broglie wave length of the ionized electrons. As an example, the single atomic nitrogen ionization cross section and the total cross sections of two nitrogen atoms with coherently added photoionization amplitudes are calculated from the threshold to about А （1 А=0.1 nm） of the photon energy. The photoionization cross sections of atomic nitrogen are obtained by using the close-coupling R-matrix method. In the calculation 19 states are included. The ionization energy of the atomic nitrogen and the photoionization cross sections agree well with the experimental results. Based on the R-matrix results of atomic nitrogen, the interference effects between two neighbouring nitrogen atoms are obtained. It is shown that the interference effects are considerable when electrons are ionized just above the threshold, even for the separations between the two atoms are larger than two times of the bond length of N2 molecules. Therefore, in hot and dense samples, effects caused by the coherent interference between the neighbours are expected to be observable for the total photoionization cross sections.

Stable quantum interference enabled by coexisting detuned and resonant STIRAPs

Inspired by a recent experiment[Phys.Rev.Lett.122253201(2019)]that an unprecedented quantum interference was observed in the way of stimulated Raman adiabatic passage(STIRAP)due to the coexisting resonant-and detuned-STIRAPs,we comprehensively study this effect.Our results uncover the scheme robustness towards any external-field fluctuations coming from laser intensity noise and imperfect resonance condition,as well as the persistence of high-contrast interference pattern even when more nearby excited levels are involved.We verify that an auxiliary dynamical phase accumulated in hold time caused by the presence of the quasi-dark state in detuned-STIRAP can sensitively manipulate the visibility and frequency of the interference pattern,representing a new hallmark to measure the hyperfine energy accurately.The robust stability of the scheme comes from the intrinsic superiority embedded in the STIRAP mechanism that preserves the coherence of population transfer,which promises a remarkable performance of quantum interference in a practical implementation.

ANALYSIS AND PREDICTION OF INTERFERENCE IN ASSEMBLING CURVED BEVEL GEARS

The phenomena of interference in the course of assembling curved bevel gears are ana. lysed and the corresponding prediction program of interference is established taking KlingInberg bevel gear as an exmple. The factors influencing interferenee are discussed and the coneept ofcritical cutter radius is proposed. Finally, a simplified approximate function between the critical cutter ra- dius and the other factors is derived,and the designing method of avoiding interferenee is provided. The analysis and caiculation are proved to consistent with a case of actual product.

Achieving Excellent Electromagnetic Interference Shielding Effectiveness in High Rare Earth Mg-12Gd-3Y alloy via Nd Addition Combined with Hot Rolling and Aging

Achieving excellent electromagnetic interference(EMI)shielding effectiveness(SE)in high rare earth(RE)-content Mg alloys is currently a significant technical challenge.This work systematically investigated the effects of different Nd elements on the electrical conductivity and EMI SE of Mg-12Gd-3Y-xNd alloy by adding Nd elements to the high RE content Mg-12Gd-3Y alloy,followed by a combined process of hot rolling and aging(R-A).The results indicate that the addition of Nd elements leads to reduced solid solubility of Gd and Y,resulting in a large amount of precipitation.The Mg-12Gd-3Y-2.0Nd alloy has the optimum EMI SE after 63%R-A treatment,reaching 88-118 dB at 30-1500 MHz.The Mg-12Gd-3Y-xNd alloy has acicular and granular forms of the Mg5(Gd,Y,Nd)(abbreviated as Mg5RE)phase after R-A treatment.The granular Mg5RE phase gradually breaks up and refines into more minor scales with increasing rolling reduction and is diffusely distributed in the matrix.The acicular Mg5RE phase is densely arranged,with cross-distribution in some areas.The cross-distributed acicular Mg5RE phase,the delicate granular Mg5RE phase,and the denseβ′phase provide more interfaces for reflecting electromagnetic waves and increase the multiple reflection loss of incident electromagnetic waves.In addition,the Mg-12Gd-3Y-xNd alloy deflects most of the c-axis of the grains parallel to the normal direction(ND)as the rolling reduction increases,making the impedance difference between the plate surface and air larger.The increased impedance makes the material reflect more loss to incident electromagnetic waves.The combined use of these two leads to an excellent EMI SE of Mg-12Gd-3Y-xNd with high RE content after R-A treatment.

Experimental study of wind loads on cylindrical reticulated shells

The cylindrical reticulated shell structures without side walls, which are normally arranged in pairs, are usually used as dry-coal sheds in a thermal power plant. The wind loads of these shells do not exist in standards or codes. Therefore, this study investigates the mean and fluctuating wind loads on a cylindrical reticulated shell with a rise-to-span ratio of 0.39 through a series of wind tunnel tests. The characteristics of the wind pressures on the upper and lower surfaces and the net pressures are presented. The results show that the wind direction and another shell structure significantly affect the wind loads on the principal shell. The most unfavorable wind direction is around 30~, whereas the effects of the wind field and the height of the coal stack are small. The surfaces of the shells are divided into nine blocks, and the block mean and fluctuating （rms） pressure coefficients suitable for engineering applications are given as references for wind load codes.

An Experimental Study on Dynamics Features of Three Side-by-Side Flexible Risers Undergoing Vortex-Induced Vibrations in A Uniform Flow

A vortex-induced vibration(VIV)experiment on three side-by-side risers subjected to a uniform flow was carried out in a combined wave-current flume.The dynamic features of interference effect on three side-by-side risers were investigated by varying fluid velocity and inter-riser spacing.The distributions of dimensionless displacement,dominant frequency,and displacement trajectory of the model risers were measured using mode decomposition and wavelet transform techniques.The coupled interference of inter-riser fluid to adjacent risers at different spacings was disclosed by introducing the"interference ratio"concept.The results show that at spacings smaller than 6.0 D,the three model risers display appreciable deviations in their displacement responses in cross-flow or in-line direction,attributable to the strong proximity disturbance and wake interference between the risers.When the spacing is increased to 8.0 D,wake interference still makes great difference to the dynamic response of the risers in both directions.As reduced velocity increases,the three risers show higher agreement with an isolated riser in overall dominant vibration frequency in CF direction than that in IL direction at all spacings and the side risers,although symmetrically placed,do not vibrate symmetrically,as a result of the steady deflection of clearance flow within the riser group.Interference effect results in a remarkable unsteady mode competition within the risers;quantitation of the interference levels for the three risers at different spacings with interference ratio revealed that under low flow velocities and large spacing ratios,clearance flow constitutes a non-neglectable interferer for three side-by-side risers.

Study on three-dimensional expansion characteristics of four wall combustion-gas jets in confined liquid space

To explore further the launch mechanism of the new underwater launching technology proposed in this paper, the expansion characteristics of four wall combustion-gas jets in confined liquid space must be studied firstly. The experimental device is designed, and the high-speed digital photographic system is adopted to obtain the expansion sequence processes of Taylor cavities formed by the four wall jets. Meanwhile, the influence of the injection pressure on the axial expansion property of the four wall jets is discussed. Based on the experiments, a three-dimensional unsteady mathematical model is established to simulate the turbulent flow process of the four wall jets expanding in liquid, and the temporal and spatial distribution laws of phase, pressure, temperature, and velocity and the evolution rules of vortices are illustrated in detail. Results show that, accompanied by the jets expanding downstream, the four wall combustion-gas jets get close to each other and achieve convergence eventually under induction of the interference effect between multiple jets. Meanwhile, the heads of the Taylor cavities separate from the observation chamber wall and offset to the central axis of the observation chamber with time going on. The numerical simulation results of the four wall combustion-gas jets coincide well with the experimental data.

Wind tunnel study of aerodynamic wind loading on middle pylon of Taizhou Bridge

Segment sectional model tests are carried out to investigate the wind loading on middle pylon of Taizhou Bridge, which has complicated three-dimensional flow due to its feature of double columns. Through the force measuring tests, aerodynamic force coefficients of every segment of the pylon columns have been obtained. It is found that the tested aerodynamic force coefficients are much smaller than those given by codes. The interference effects of aerodynamic force coefficients between columns of pylon are discussed. The results show that the interference effect is the most evident when the yaw angle is about 30 ° from transverse direction. This kind of interference effect can be described as diminutions in transverse aerodynamic force coefficients and magnifications in longitudinal aerodynamic force coefficients of downstream columns.

Multi-objective optimization design of deviation-correction trajectory considering the production loss in shale gas cluster well

In shale gas mining,the inter-fracture interference effect will significantly occur if the actual well deviates from the planned trajectory.To reduce production loss,operators want to get back on the planned trajectory economically and safely.Based on this,a multi-objective optimization model of deviationcorrection trajectory is established considering the production loss evaluation.Firstly,the functional relationship between the production envelope and the fracturing depth is constructed,and the production loss is obtained by combining the calculation method of volume flow.Based on the proposed“double-arc”trajectory design method,the production loss of the fracture on the deviation-correction trajectory is obtained.Finally,combined with the well profile energy evaluation,a new optimization model of deviation-correction trajectory is established.The results demonstrate that after optimizing the fracturing depth,the production loss of the deviation-correction trajectory is reduced by 13.2%.The maximum curvature value results in a trajectory with a minimum production loss yet a maximum well profile energy.The proposed model reduces the well profile energy by 15.6%compared with the existing model.It is proved that the proposed model can reduce the probability of drilling accidents and achieve high gas production in the later mining stage.This study fully considers various factors affecting horizontal wells in the fracturing area,which can provide theoretical guidance for the design of deviationcorrection trajectory.