Objective:To investigate the effectiveness and efficiency of combining levamlodipine besylate and valsartan in the treatment of hypertension.Methods:This study selected 28 patients with hypertension as observation sub...Objective:To investigate the effectiveness and efficiency of combining levamlodipine besylate and valsartan in the treatment of hypertension.Methods:This study selected 28 patients with hypertension as observation subjects.The treatment duration ranged from January 2020 to June 2023.Using the random number table method,patients were divided into two groups.The control group received treatment with valsartan,while the observation group received a combination of valsartan and levamlodipine besylate.Therapeutic effects and safety were compared between the groups,and changes in the patient’s blood pressure and renal function index levels were assessed.Results:The total clinical effective rate of the observation group was significantly higher than that of the control group(P<0.05).The observation group demonstrated better diastolic blood pressure,systolic blood pressure,and renal function indicators compared to the control group(P<0.05).There was no significant difference in the incidence of adverse reactions between the two groups(P>0.05).Conclusion:The combined treatment of levamlodipine besylate and valsartan in patients with hypertension showed significant clinical efficacy and holds broad application value.展开更多
Objective: To analyze the effect of health management on improving the awareness rate of disease prevention and treatment in patients with prehypertension, so as to provide guidance for clinical management of patients...Objective: To analyze the effect of health management on improving the awareness rate of disease prevention and treatment in patients with prehypertension, so as to provide guidance for clinical management of patients with prehypertension. Methods: 108 patients diagnosed with prehypertension in our hospital were divided into a control group and an experimental group. The control group was not given management measures, while the experimental group was given health management. The incidence of hypertension and cognition level of hypertension knowledge were compared between the two groups after management. Results: The incidence of hypertension in the experimental group was 7.41% lower than that in the control group 29.63%. The cognitive level of hypertension in the patients (66.54 ± 1.25) was significantly higher than that in the patients without health management (41.45 ± 2.45), and P < 0.05;Conclusion: For patients with prehypertension, the implementation of health management is helpful to improve their cognition of hypertension, master related prevention knowledge, and reduce the incidence of hypertension.展开更多
This paper focuses on a common problem for entrepreneurs and investors:the uncertainty around the actual tax rate,which is the percent of net income that a corporation pays in taxes.This uncertainty results from a dif...This paper focuses on a common problem for entrepreneurs and investors:the uncertainty around the actual tax rate,which is the percent of net income that a corporation pays in taxes.This uncertainty results from a difference(i.e.,a gap)between the statutory and the effective tax rate,which is the actual tax rate.This gap results from the legal framework which provides that certain types of incomes and expenses are not considered income.This gap causes significant uncertainty and may hinder entrepreneurship.This paper studies this gap in seven OECD countries(Austria,Canada,France,Germany,Italy,UK,and USA)and Brazil.We selected the 10 top-listed companies of each country and calculated the gaps for the period 2016-2019.Our findings proved that these gaps are unstable and may differ between companies of the same country and between countries.In addition,gaps of specific companies may change over time.The key outcome of this paper is the proposal of a new derivative tax rate swap.Using this derivative,governments will be able to eliminate the gap of specific companies,attract new investment,and increase entrepreneurship.展开更多
Laser-assisted simulation technique has played a crucial role in the investigation of dose rate effects of silicon-based devices and integrated circuits,due to its exceptional advantages in terms of flexibility,safety...Laser-assisted simulation technique has played a crucial role in the investigation of dose rate effects of silicon-based devices and integrated circuits,due to its exceptional advantages in terms of flexibility,safety,convenience,and precision.In recent years,wide band gap materials,known for their strong bonding and high ionization energy,have gained increasing attention from researchers and hold significant promise for extensive applications in specialized environments.Consequently,there is a growing need for comprehensive research on the dose rate effects of wide band gap materials.In response to this need,the use of laser-assisted simulation technology has emerged as a promising approach,offering an effective means to assess the efficacy of investigating these materials and devices.This paper focused on investigating the feasibility of laser-assisted simulation to study the dose rate effects of wide band gap semiconductor devices.Theoretical conversion factors for laser-assisted simulation of dose rate effects of GaN-based and SiC-based devices were been provided.Moreover,to validate the accuracy of the conversion factors,pulsed laser and dose rate experiments were conducted on GaN-based and SiC-based PIN diodes.The results demonstrate that pulsed laser radiation andγ-ray radiation can produce highly similar photocurrent responses in GaN-based and SiC-based PIN diodes,with correlation coefficients of 0.98 and 0.974,respectively.This finding reaffirms the effectiveness of laser-assisted simulation technology,making it a valuable complement in studying the dose rate effects of wide band gap semiconductor devices.展开更多
In recent years,Internet of Things(IoT)technology has emerged and gradually sprung up.As the needs of largescale IoT applications cannot be satisfied by the fifth generation(5G)network,wireless communication network n...In recent years,Internet of Things(IoT)technology has emerged and gradually sprung up.As the needs of largescale IoT applications cannot be satisfied by the fifth generation(5G)network,wireless communication network needs to be developed into the sixth generation(6G)network.However,with the increasingly prominent security problems of wireless communication networks such as 6G,covert communication has been recognized as one of the most promising solutions.Covert communication can realize the transmission of hidden information between both sides of communication to a certain extent,which makes the transmission content and transmission behavior challenging to be detected by noncooperative eavesdroppers.In addition,the integrated high altitude platform station(HAPS)terrestrial network is considered a promising development direction because of its flexibility and scalability.Based on the above facts,this article investigates the covert communication in an integrated HAPS terrestrial network,where a constant power auxiliary node is utilized to send artificial noise(AN)to realize the covert communication.Specifically,the covert constraint relationship between the transmitting and auxiliary nodes is derived.Moreover,the closed-form expressions of outage probability(OP)and effective covert communication rate are obtained.Finally,numerical results are provided to verify our analysis and reveal the impacts of critical parameters on the system performance.展开更多
BACKGROUND Endoscopic retrograde cholangiopancreatography(ERCP)is an accurate diagnostic method for choledocholithiasis and treatment option for stone removal.Additionally,ursodeoxycholic acid(UDCA)can dissolve choles...BACKGROUND Endoscopic retrograde cholangiopancreatography(ERCP)is an accurate diagnostic method for choledocholithiasis and treatment option for stone removal.Additionally,ursodeoxycholic acid(UDCA)can dissolve cholesterol stones and prevent their development and reappearance by lowering the cholesterol concen-tration in bile.Despite these treatment options,there are still patients who experience stone recurrence.The clinical data of 100 patients with choledochal stones who were hospitalized at the Yixing People’s Hospital and underwent ERCP for successful stone extraction between June 2020 and December 2022 were retrospectively collected.According to the post-ERCP treatment plan,100 patients were classified into UDCA(n=47)and control(n=53)groups.We aimed to assess the clinical efficacy and rate of relapse in the two patient populations.We then collected information(basic demographic data,clinical characteristics,and serum biochemical indicators)and determined the factors contributing to relapse using logistic regression analysis.Our secondary goal was to determine the effects of UDCA on liver function after ERCP.Compared to the control group,the UDCA group demonstrated a higher clinical effectiveness rate of 92.45%vs 78.72%(P<0.05).No significant differences were observed in liver function indices,including total bilirubin,direct bilirubin,gamma-glutamyl transpeptidase,alanine aminotransferase,alkaline phosphatase,and aspartate aminotransferase,between the two groups before treatment.After treatment,all liver function indices were significantly reduced.Comparing the control vs UDCA groups,the UDCA group exhibited significantly lower levels of all indices(55.39±6.53 vs 77.31±8.52,32.10±4.62 vs 45.39±5.69,142.32±14.21 vs 189.63±16.87,112.52±14.25 vs 149.36±15.36,122.61±16.00 vs 171.33±22.09,96.98±10.44 vs 121.35±11.57,respectively,all P<0.05).The stone recurrence rate was lower in the UDCA group(13.21%)in contrast with the control group(44.68%).Periampullary diverticula(OR:6.00,95%CI:1.69-21.30),maximum stone diameter(OR:1.69,95%CI:1.01-2.85),stone quantity>3(OR:4.23,95%CI:1.17-15.26),and positive bile culture(OR:7.61,95%CI:2.07-27.91)were independent factors that influenced the relapse of common bile duct stones after ERCP(P<0.05).Furthermore,postoperative UDCA was identified as a preventive factor(OR:0.07;95%CI:0.08-0.09).CONCLUSION The intervention effect of UDCA after ERCP for common bile duct stones is adequate,providing new research directions and references for the prevention and treatment of stone recurrence.展开更多
Objective:To evaluate the effect and efficiency of ear tip bloodletting combined with Xianfang Huoming Yin(XFH)in the treatment of early-stage wheals.Methods:70 patients with early-stage wheals admitted from September...Objective:To evaluate the effect and efficiency of ear tip bloodletting combined with Xianfang Huoming Yin(XFH)in the treatment of early-stage wheals.Methods:70 patients with early-stage wheals admitted from September 2020 to September 2022 were divided into two groups by randomized numerical table method,with 35 cases/group.Both groups received conventional treatment,the control group combined with XFH,and the observation group combined with ear tip bloodletting therapy and XFH.Conscious symptom scores,ocular indexes,therapeutic effects,and sleep quality between the two groups were compared.Results:After the treatment,the patients in the observation group had lower self-awareness symptom scores and sleep quality scores as compared to those in the control group;the diameter of the mass in the observation group was smaller than that of the control group after treatment;the average tear film rupture time and the time taken for the first non-contact tear film to rupture were longer in the observation group than those in the control group;the total effective rate of the treatment in the observation group was higher than that of the control group(P<0.05).Conclusion:Ear tip bloodletting combined with XFH was ideal for the treatment of early-stage wheals and has a high effective rate.展开更多
The seemingly contradictory understandings of the initial crush stress of cellular materials under dynamic loadings exist in the literature, and a comprehensive analysis of this issue is carried out with using direct ...The seemingly contradictory understandings of the initial crush stress of cellular materials under dynamic loadings exist in the literature, and a comprehensive analysis of this issue is carried out with using direct information of local stress and strain. Local stress/strain calculation methods are applied to determine the initial crush stresses and the strain rates at initial crush from a cell-based finite element model of irregular honeycomb under dynamic loadings. The initial crush stress under constant-velocity compression is identical to the quasi-static one, but less than the one under direct impact, i.e. the initial crush stresses under different dynamic loadings could be very different even though there is no strain-rate effect of matrix material. A power-law relation between the initial crush stress and the strain rate is explored to describe the strain-rate effect on the initial crush stress of irregular honeycomb when the local strain rate exceeds a critical value, below which there is no strain-rate effect of irregular honeycomb. Deformation mechanisms of the initial crush behavior under dynamic loadings are also explored.The deformation modes of the initial crush region in the front of plastic compaction wave are different under different dynamic loadings.展开更多
The code for calculating the crown effect rate of hot strip steel Was developed using the effect function method. The effect of the initial crown on the crown of the product in hot strip rolling was investigated. The ...The code for calculating the crown effect rate of hot strip steel Was developed using the effect function method. The effect of the initial crown on the crown of the product in hot strip rolling was investigated. The coefficients of a polynomial of degree six for calculating the base value of initial crown effect rate in 4-high mill were determined and the compensation factors of per unit width rolling force, bending force, work roll crown and draft on the initial crown effect rate were given. The difference between the calculation result by established model and theoretical value obtained by effect function method was 4.88 μm when the strip width was 1.85 m.展开更多
The controlling plastic deformation mechanisms(i.e.slip or twinning)and the structural crash performance of Mg alloys are strongly influenced by loading mode,texture and microstructure.This paper summarizes the main r...The controlling plastic deformation mechanisms(i.e.slip or twinning)and the structural crash performance of Mg alloys are strongly influenced by loading mode,texture and microstructure.This paper summarizes the main results from an experimental program to assess these effects for commercial Mg alloy extrusions(AM30 and AZ31),sheet(AZ31),and high pressure die castings(HPDC,AM50 and AM60).Uniaxial tensile and compressive tests were performed over a wide range of strain rate and temperature(i.e.0.00075–2800 s^(−1) and 100℃ to−150℃)using conventional servo-hydraulic and high-strain-rate universal test machines and a split-Hopkinson-bar(SHB)apparatus.In primarily-slip-dominant deformation,the true stress–strain curves showed approximate power-law behavior,and the effects of strain rate and temperature on yield strength could be approximately described by constitutive equations linearly dependent on the rate parameter,Tln(5.3×10^(7)/ɛ˙)where T is test temperature in Kelvin andɛ˙is strain rate in s^(−1).In primarily-twin-dominant deformation,the effects of strain rate and temperature on yield and initial flow stress were negligible or small from quasi-static to 2800 s^(−1) owing to the athermal characteristics of mechanical twinning;the effects may become more pronounced with exhaustion of twinning and increasing proportion of slip.展开更多
Software for calculating the strip profile in 4-high hot rolling mill was developed using influence coefficient method. Regularity of backup roller diameter effect rate was studied systematically using the software. T...Software for calculating the strip profile in 4-high hot rolling mill was developed using influence coefficient method. Regularity of backup roller diameter effect rate was studied systematically using the software. The results show that backup roller diameter effect rates decrease versus the increase of strip width, increase significantly versus the increase of backup roller diameter and obscurely increase versus the increase of reduction. The difference between backup roller diameter effect rate and it is reference value increases versus strip width increasing. When backup rollers diameter is set to be 1.64 m and strip width is 1.85 m, the error of strip profile calculated using the model of backup roller diameter effect rate reference value will be 3.55μm. Based on the results, reference values of roller diameter effect rate and six power polynomial fitting coefficients of modification coefficients were determined considering coherent parameters. The high precision model of backup roller diameter effect rate was established. When the model is used to predict strip profile, the accuracy is less than 5.0 μm.展开更多
Partial drainage often occurs during piezocone penetration testing on Yellow River Delta silt because of its intermediate physical and mechanical properties between those of sand and clay.Yet,there is no accurate unde...Partial drainage often occurs during piezocone penetration testing on Yellow River Delta silt because of its intermediate physical and mechanical properties between those of sand and clay.Yet,there is no accurate understanding for the range of penetra-tion rates to trigger the partial drainage of silt soils.In order to fully investigate cone penetration rate effects under partial drainage condi-tions,indoor 1 g penetration model tests and numerical simulations of cavity expansion at variable penetration rates were carried out on the Yellow River Delta silt.The boundary effect of the model tests and the variation of key parameters at the different cavity ex-pansion rates were analyzed.The 1 g penetration model test results and numerical simulations results consistently indicated that the penetration rate to trigger the partially drainage of typical silt varied at least three orders of magnitude.The numerical simulations also provide the reference values for the penetration resistance corresponding to zero dilation and zero viscosity at any given normalized penetration rate for silt in Yellow River Delta.These geotechnical properties can be used for the design of offshore platforms in Yel-low River Delta,and the understanding of cone penetration rate effects under the partially drained conditions would provide some technical support for geohazard evaluation of offshore platforms.展开更多
Since rate effect of materials plays a key role in impact engineering, the microscopic mechanism of rate effect is investigated at molecular level in this paper. The results show that rate effect on the strength of at...Since rate effect of materials plays a key role in impact engineering, the microscopic mechanism of rate effect is investigated at molecular level in this paper. The results show that rate effect on the strength of atomic system is closely related to the coupled evolution of atomic motions and potential landscapes. Accordingly, it becomes possible to develop a new algorithm of molecular simulation, which could properly and efficiently demonstrate strain rate effect under a wide range of loading rates and unveil the mecha- nisms underlying the strain rate effects.展开更多
The dynamic stress-strain curves of 93% tungsten (W) alloy in the forged state at strain rates up to (5 000 s^(-1)) and in the temperature range from 223 K to 473 K were measured with the split Hopkinson pressure bar ...The dynamic stress-strain curves of 93% tungsten (W) alloy in the forged state at strain rates up to (5 000 s^(-1)) and in the temperature range from 223 K to 473 K were measured with the split Hopkinson pressure bar (SHPB) technique. Based on the above experimental data a dynamic constitutive equation considering the effects of strain rate, temperature and the special microstructure of such a kind of W-alloy was proposed. The numerical simulation for the experimental process with this constitutive equation was also carried out, the results show that the constitutive relationship constructed in this paper is very satisfactory for representing the dynamic responsive behavior of material..展开更多
Novel properties and applications of multilayered nanowires(MNWs)urge researchers to understand their mechanical behaviors comprehensively.Using the molecular dynamic simulation,tensile behaviors of Ti/Ni MNWs are inv...Novel properties and applications of multilayered nanowires(MNWs)urge researchers to understand their mechanical behaviors comprehensively.Using the molecular dynamic simulation,tensile behaviors of Ti/Ni MNWs are investigated under a series of layer thickness values(1.31,2.34,and 7.17 nm)and strain rates(1.0×10^(8)s^(-1)≤ε≤5.0×10^(10)s^(-1)).The results demonstrate that deformation mechanisms of isopachous Ti/Ni MNWs are determined by the layer thickness and strain rate.Four distinct strain rate regions in the tensile process can be discovered,which are small,intermediate,critical,and large strain rate regions.As the strain rate increases,the initial plastic behaviors transform from interface shear(the shortest sample)and grain reorientation(the longest sample)in small strain rate region to amorphization of crystalline structures(all samples)in large strain rate region.Microstructure evolutions reveal that the disparate tensile behaviors are ascribed to the atomic fractions of different structures in small strain rate region,and only related to collapse of crystalline atoms in high strain rate region.A layer thickness-strain rate-dependent mechanism diagram is given to illustrate the couple effect on the plastic deformation mechanisms of the isopachous nanowires.The results also indicate that the modulation ratio significantly affects the tensile properties of unequal Ti/Ni MNWs,but barely affect the plastic deformation mechanisms of the materials.The observations from this work will promote theoretical researches and practical applications of Ti/Ni MNWs.展开更多
Different fragments of a hot-rolled and homogenized Cu–Zn–Al shape memory alloy(SMA) were subjected to thermal cycling by means of a differential scanning calorimetric(DSC) device. During thermal cycling, heatin...Different fragments of a hot-rolled and homogenized Cu–Zn–Al shape memory alloy(SMA) were subjected to thermal cycling by means of a differential scanning calorimetric(DSC) device. During thermal cycling, heating was performed at the same constant rate of increasing temperature while cooling was carried out at different rates of decreasing temperature. For each cooling rate, the temperature decreased in the same thermal interval. During each cooling stage, an exothermic peak(maximum) was observed on the DSC thermogram. This peak was associated with forward martensitic transformation. The DSC thermograms were analyzed with PROTEUS software: the critical martensitic transformation start(Ms) and finish(Mf) temperatures were determined by means of integral and tangent methods, and the dissipated heat was evaluated by the area between the corresponding maximum plot and a sigmoid baseline. The effects of the increase in cooling rate, assessed from a calorimetric viewpoint, consisted in the augmentation of the exothermic peak and the delay of direct martensitic transformation. The latter had the tendency to move to lower critical transformation temperatures. The martensite plates changed in morphology by becoming more oriented and by an augmenting in surface relief, which corresponded with the increase in cooling rate as observed by scanning electron microscopy(SEM) and atomic force microscopy(AFM).展开更多
Addition of digested sewage sludge at concentrations of 2% and 10% (v/v) to the water increased coughing rate in big head and tilapia (P<0.05). Ventilation rate was significantly decreased (P<0.05) in big head a...Addition of digested sewage sludge at concentrations of 2% and 10% (v/v) to the water increased coughing rate in big head and tilapia (P<0.05). Ventilation rate was significantly decreased (P<0.05) in big head and tilapia at sludge concentrations of 6% and 2% (v/v)respectively. Copper (Cu), cadmium (Cd) and zinc (Zn) are trace metals which are commonly found in sludge. Cu caused a significant increase (P<0.05) in coughing rate in both tilapia and big head at concentrations of 0.3 and 0.2 μg/ml respectively. Zn caused significant increase (P<0.05) in coughing rate only in big head at 2 μg/ml. Neither fish responded to Cd of up to 2μg/ml in the water. However, when the levels of these trace metals in the digested sludge were measured, they were below that which can cause significant changes in the respiratory movements. Therefore, the changes in ventilation and coughing rates after addition of sludge may be due to the presence of substances other than these metals. The results of this experiment provides a guideline to control the level of sludge that can be used in rearing these fresh water fish in ponds展开更多
Objective To investigate effect of Pentoxifylline on free flap. Methods Forty Wistar rats were chosen as experimental models and free flaps were harvested from the back of rats,which as pect ratio was 3: 1. Then they ...Objective To investigate effect of Pentoxifylline on free flap. Methods Forty Wistar rats were chosen as experimental models and free flaps were harvested from the back of rats,which as pect ratio was 3: 1. Then they were divided into two groups randomly. Group A was as the experimental group,receiving drug treatment.展开更多
The seed-setting rate of hybrid rice is general-ly lower than that of conventional varieties.One of the factors explained this phenomenonis the proline concentration in anthers.Fiveconcentrations(30,50,80,120,and240 m...The seed-setting rate of hybrid rice is general-ly lower than that of conventional varieties.One of the factors explained this phenomenonis the proline concentration in anthers.Fiveconcentrations(30,50,80,120,and240 mg/kg)of exogenous proline were sprayedat meiosis stage of the early hybrid rice combi-nation Shanyou R3-2.Anthers were collected展开更多
Objective To investigate the effect of adipose stromal vascular fraction cells(SVFs)on the survival rate of fat ransplantation.Methods 0.5mL autologous fat tissue was mixed with: ① DiI-labeled autologous SVFs (Group ...Objective To investigate the effect of adipose stromal vascular fraction cells(SVFs)on the survival rate of fat ransplantation.Methods 0.5mL autologous fat tissue was mixed with: ① DiI-labeled autologous SVFs (Group A);②展开更多
文摘Objective:To investigate the effectiveness and efficiency of combining levamlodipine besylate and valsartan in the treatment of hypertension.Methods:This study selected 28 patients with hypertension as observation subjects.The treatment duration ranged from January 2020 to June 2023.Using the random number table method,patients were divided into two groups.The control group received treatment with valsartan,while the observation group received a combination of valsartan and levamlodipine besylate.Therapeutic effects and safety were compared between the groups,and changes in the patient’s blood pressure and renal function index levels were assessed.Results:The total clinical effective rate of the observation group was significantly higher than that of the control group(P<0.05).The observation group demonstrated better diastolic blood pressure,systolic blood pressure,and renal function indicators compared to the control group(P<0.05).There was no significant difference in the incidence of adverse reactions between the two groups(P>0.05).Conclusion:The combined treatment of levamlodipine besylate and valsartan in patients with hypertension showed significant clinical efficacy and holds broad application value.
文摘Objective: To analyze the effect of health management on improving the awareness rate of disease prevention and treatment in patients with prehypertension, so as to provide guidance for clinical management of patients with prehypertension. Methods: 108 patients diagnosed with prehypertension in our hospital were divided into a control group and an experimental group. The control group was not given management measures, while the experimental group was given health management. The incidence of hypertension and cognition level of hypertension knowledge were compared between the two groups after management. Results: The incidence of hypertension in the experimental group was 7.41% lower than that in the control group 29.63%. The cognitive level of hypertension in the patients (66.54 ± 1.25) was significantly higher than that in the patients without health management (41.45 ± 2.45), and P < 0.05;Conclusion: For patients with prehypertension, the implementation of health management is helpful to improve their cognition of hypertension, master related prevention knowledge, and reduce the incidence of hypertension.
文摘This paper focuses on a common problem for entrepreneurs and investors:the uncertainty around the actual tax rate,which is the percent of net income that a corporation pays in taxes.This uncertainty results from a difference(i.e.,a gap)between the statutory and the effective tax rate,which is the actual tax rate.This gap results from the legal framework which provides that certain types of incomes and expenses are not considered income.This gap causes significant uncertainty and may hinder entrepreneurship.This paper studies this gap in seven OECD countries(Austria,Canada,France,Germany,Italy,UK,and USA)and Brazil.We selected the 10 top-listed companies of each country and calculated the gaps for the period 2016-2019.Our findings proved that these gaps are unstable and may differ between companies of the same country and between countries.In addition,gaps of specific companies may change over time.The key outcome of this paper is the proposal of a new derivative tax rate swap.Using this derivative,governments will be able to eliminate the gap of specific companies,attract new investment,and increase entrepreneurship.
基金National Natural Science Foundation of China(12205028)Natural Science Foundation of Sichuan Province(2022NSFSC1235)Young and Middle-aged Backbone Teacher Foundation of Chengdu University of Technology(10912-JXGG2022-08363)。
文摘Laser-assisted simulation technique has played a crucial role in the investigation of dose rate effects of silicon-based devices and integrated circuits,due to its exceptional advantages in terms of flexibility,safety,convenience,and precision.In recent years,wide band gap materials,known for their strong bonding and high ionization energy,have gained increasing attention from researchers and hold significant promise for extensive applications in specialized environments.Consequently,there is a growing need for comprehensive research on the dose rate effects of wide band gap materials.In response to this need,the use of laser-assisted simulation technology has emerged as a promising approach,offering an effective means to assess the efficacy of investigating these materials and devices.This paper focused on investigating the feasibility of laser-assisted simulation to study the dose rate effects of wide band gap semiconductor devices.Theoretical conversion factors for laser-assisted simulation of dose rate effects of GaN-based and SiC-based devices were been provided.Moreover,to validate the accuracy of the conversion factors,pulsed laser and dose rate experiments were conducted on GaN-based and SiC-based PIN diodes.The results demonstrate that pulsed laser radiation andγ-ray radiation can produce highly similar photocurrent responses in GaN-based and SiC-based PIN diodes,with correlation coefficients of 0.98 and 0.974,respectively.This finding reaffirms the effectiveness of laser-assisted simulation technology,making it a valuable complement in studying the dose rate effects of wide band gap semiconductor devices.
基金supported by the National Science Foundation of China under Grant 62001517in part by the Research Project of Space Engineering University under Grants 2020XXAQ01 and 2019XXAQ05,and in part by the Science and Technology Innovation Cultivation Fund of Space Engineering University.
文摘In recent years,Internet of Things(IoT)technology has emerged and gradually sprung up.As the needs of largescale IoT applications cannot be satisfied by the fifth generation(5G)network,wireless communication network needs to be developed into the sixth generation(6G)network.However,with the increasingly prominent security problems of wireless communication networks such as 6G,covert communication has been recognized as one of the most promising solutions.Covert communication can realize the transmission of hidden information between both sides of communication to a certain extent,which makes the transmission content and transmission behavior challenging to be detected by noncooperative eavesdroppers.In addition,the integrated high altitude platform station(HAPS)terrestrial network is considered a promising development direction because of its flexibility and scalability.Based on the above facts,this article investigates the covert communication in an integrated HAPS terrestrial network,where a constant power auxiliary node is utilized to send artificial noise(AN)to realize the covert communication.Specifically,the covert constraint relationship between the transmitting and auxiliary nodes is derived.Moreover,the closed-form expressions of outage probability(OP)and effective covert communication rate are obtained.Finally,numerical results are provided to verify our analysis and reveal the impacts of critical parameters on the system performance.
文摘BACKGROUND Endoscopic retrograde cholangiopancreatography(ERCP)is an accurate diagnostic method for choledocholithiasis and treatment option for stone removal.Additionally,ursodeoxycholic acid(UDCA)can dissolve cholesterol stones and prevent their development and reappearance by lowering the cholesterol concen-tration in bile.Despite these treatment options,there are still patients who experience stone recurrence.The clinical data of 100 patients with choledochal stones who were hospitalized at the Yixing People’s Hospital and underwent ERCP for successful stone extraction between June 2020 and December 2022 were retrospectively collected.According to the post-ERCP treatment plan,100 patients were classified into UDCA(n=47)and control(n=53)groups.We aimed to assess the clinical efficacy and rate of relapse in the two patient populations.We then collected information(basic demographic data,clinical characteristics,and serum biochemical indicators)and determined the factors contributing to relapse using logistic regression analysis.Our secondary goal was to determine the effects of UDCA on liver function after ERCP.Compared to the control group,the UDCA group demonstrated a higher clinical effectiveness rate of 92.45%vs 78.72%(P<0.05).No significant differences were observed in liver function indices,including total bilirubin,direct bilirubin,gamma-glutamyl transpeptidase,alanine aminotransferase,alkaline phosphatase,and aspartate aminotransferase,between the two groups before treatment.After treatment,all liver function indices were significantly reduced.Comparing the control vs UDCA groups,the UDCA group exhibited significantly lower levels of all indices(55.39±6.53 vs 77.31±8.52,32.10±4.62 vs 45.39±5.69,142.32±14.21 vs 189.63±16.87,112.52±14.25 vs 149.36±15.36,122.61±16.00 vs 171.33±22.09,96.98±10.44 vs 121.35±11.57,respectively,all P<0.05).The stone recurrence rate was lower in the UDCA group(13.21%)in contrast with the control group(44.68%).Periampullary diverticula(OR:6.00,95%CI:1.69-21.30),maximum stone diameter(OR:1.69,95%CI:1.01-2.85),stone quantity>3(OR:4.23,95%CI:1.17-15.26),and positive bile culture(OR:7.61,95%CI:2.07-27.91)were independent factors that influenced the relapse of common bile duct stones after ERCP(P<0.05).Furthermore,postoperative UDCA was identified as a preventive factor(OR:0.07;95%CI:0.08-0.09).CONCLUSION The intervention effect of UDCA after ERCP for common bile duct stones is adequate,providing new research directions and references for the prevention and treatment of stone recurrence.
文摘Objective:To evaluate the effect and efficiency of ear tip bloodletting combined with Xianfang Huoming Yin(XFH)in the treatment of early-stage wheals.Methods:70 patients with early-stage wheals admitted from September 2020 to September 2022 were divided into two groups by randomized numerical table method,with 35 cases/group.Both groups received conventional treatment,the control group combined with XFH,and the observation group combined with ear tip bloodletting therapy and XFH.Conscious symptom scores,ocular indexes,therapeutic effects,and sleep quality between the two groups were compared.Results:After the treatment,the patients in the observation group had lower self-awareness symptom scores and sleep quality scores as compared to those in the control group;the diameter of the mass in the observation group was smaller than that of the control group after treatment;the average tear film rupture time and the time taken for the first non-contact tear film to rupture were longer in the observation group than those in the control group;the total effective rate of the treatment in the observation group was higher than that of the control group(P<0.05).Conclusion:Ear tip bloodletting combined with XFH was ideal for the treatment of early-stage wheals and has a high effective rate.
基金supported by the National Natural Science Foundation of China (Grants 11372308, 11372307)the Fundamental Research Funds for the Central Universities (Grant WK2480000001)
文摘The seemingly contradictory understandings of the initial crush stress of cellular materials under dynamic loadings exist in the literature, and a comprehensive analysis of this issue is carried out with using direct information of local stress and strain. Local stress/strain calculation methods are applied to determine the initial crush stresses and the strain rates at initial crush from a cell-based finite element model of irregular honeycomb under dynamic loadings. The initial crush stress under constant-velocity compression is identical to the quasi-static one, but less than the one under direct impact, i.e. the initial crush stresses under different dynamic loadings could be very different even though there is no strain-rate effect of matrix material. A power-law relation between the initial crush stress and the strain rate is explored to describe the strain-rate effect on the initial crush stress of irregular honeycomb when the local strain rate exceeds a critical value, below which there is no strain-rate effect of irregular honeycomb. Deformation mechanisms of the initial crush behavior under dynamic loadings are also explored.The deformation modes of the initial crush region in the front of plastic compaction wave are different under different dynamic loadings.
基金This study was financially supported by the National Nat-ural Science Foundation of China under grant No.59995440the State Key Development Programming Research under grant No.G2000027208-4the Natural Science Foundar tion of Liaoning Province under grant No.2001101021.
文摘The code for calculating the crown effect rate of hot strip steel Was developed using the effect function method. The effect of the initial crown on the crown of the product in hot strip rolling was investigated. The coefficients of a polynomial of degree six for calculating the base value of initial crown effect rate in 4-high mill were determined and the compensation factors of per unit width rolling force, bending force, work roll crown and draft on the initial crown effect rate were given. The difference between the calculation result by established model and theoretical value obtained by effect function method was 4.88 μm when the strip width was 1.85 m.
基金This work is part of the crashworthiness R&D task of an on-going Canada-China-US Magnesium Front-End Research and Development(MFERD)project.The Canadian task is funded by the CCT&I and ASM-NGV programs,Govemment of Canada.
文摘The controlling plastic deformation mechanisms(i.e.slip or twinning)and the structural crash performance of Mg alloys are strongly influenced by loading mode,texture and microstructure.This paper summarizes the main results from an experimental program to assess these effects for commercial Mg alloy extrusions(AM30 and AZ31),sheet(AZ31),and high pressure die castings(HPDC,AM50 and AM60).Uniaxial tensile and compressive tests were performed over a wide range of strain rate and temperature(i.e.0.00075–2800 s^(−1) and 100℃ to−150℃)using conventional servo-hydraulic and high-strain-rate universal test machines and a split-Hopkinson-bar(SHB)apparatus.In primarily-slip-dominant deformation,the true stress–strain curves showed approximate power-law behavior,and the effects of strain rate and temperature on yield strength could be approximately described by constitutive equations linearly dependent on the rate parameter,Tln(5.3×10^(7)/ɛ˙)where T is test temperature in Kelvin andɛ˙is strain rate in s^(−1).In primarily-twin-dominant deformation,the effects of strain rate and temperature on yield and initial flow stress were negligible or small from quasi-static to 2800 s^(−1) owing to the athermal characteristics of mechanical twinning;the effects may become more pronounced with exhaustion of twinning and increasing proportion of slip.
基金the National Natu-ral Science Foundation of China,under the contract No.59995440the State Key Development Prograrmming Research under the contract No.G2000027208-4 the Natural Science Foundation ofLiaoning Province,under the contract No.2001101021.
文摘Software for calculating the strip profile in 4-high hot rolling mill was developed using influence coefficient method. Regularity of backup roller diameter effect rate was studied systematically using the software. The results show that backup roller diameter effect rates decrease versus the increase of strip width, increase significantly versus the increase of backup roller diameter and obscurely increase versus the increase of reduction. The difference between backup roller diameter effect rate and it is reference value increases versus strip width increasing. When backup rollers diameter is set to be 1.64 m and strip width is 1.85 m, the error of strip profile calculated using the model of backup roller diameter effect rate reference value will be 3.55μm. Based on the results, reference values of roller diameter effect rate and six power polynomial fitting coefficients of modification coefficients were determined considering coherent parameters. The high precision model of backup roller diameter effect rate was established. When the model is used to predict strip profile, the accuracy is less than 5.0 μm.
基金supported by the National Natural Science Foundation of China(Nos.U1806230,U2006213),and the Fundamental Research Funds for the Central Univer-sities(No.201962011).
文摘Partial drainage often occurs during piezocone penetration testing on Yellow River Delta silt because of its intermediate physical and mechanical properties between those of sand and clay.Yet,there is no accurate understanding for the range of penetra-tion rates to trigger the partial drainage of silt soils.In order to fully investigate cone penetration rate effects under partial drainage condi-tions,indoor 1 g penetration model tests and numerical simulations of cavity expansion at variable penetration rates were carried out on the Yellow River Delta silt.The boundary effect of the model tests and the variation of key parameters at the different cavity ex-pansion rates were analyzed.The 1 g penetration model test results and numerical simulations results consistently indicated that the penetration rate to trigger the partially drainage of typical silt varied at least three orders of magnitude.The numerical simulations also provide the reference values for the penetration resistance corresponding to zero dilation and zero viscosity at any given normalized penetration rate for silt in Yellow River Delta.These geotechnical properties can be used for the design of offshore platforms in Yel-low River Delta,and the understanding of cone penetration rate effects under the partially drained conditions would provide some technical support for geohazard evaluation of offshore platforms.
基金supported by the National Basic Research Program of China (973 Program)(2012CB937500)the National Natural Science Foundation of China (11202212,10932011,11021262,11172024,11172305,and 11232013)
文摘Since rate effect of materials plays a key role in impact engineering, the microscopic mechanism of rate effect is investigated at molecular level in this paper. The results show that rate effect on the strength of atomic system is closely related to the coupled evolution of atomic motions and potential landscapes. Accordingly, it becomes possible to develop a new algorithm of molecular simulation, which could properly and efficiently demonstrate strain rate effect under a wide range of loading rates and unveil the mecha- nisms underlying the strain rate effects.
文摘The dynamic stress-strain curves of 93% tungsten (W) alloy in the forged state at strain rates up to (5 000 s^(-1)) and in the temperature range from 223 K to 473 K were measured with the split Hopkinson pressure bar (SHPB) technique. Based on the above experimental data a dynamic constitutive equation considering the effects of strain rate, temperature and the special microstructure of such a kind of W-alloy was proposed. The numerical simulation for the experimental process with this constitutive equation was also carried out, the results show that the constitutive relationship constructed in this paper is very satisfactory for representing the dynamic responsive behavior of material..
基金Project supported by the National Natural Science Foundation of China(Grant No.11572259)the Natural Science Foundation of Shaanxi Province,China(Grant No.2019JQ-827)the Scientific Research Program Funded by Shaanxi Provincial Education Department,China(Grant No.19JK0672).
文摘Novel properties and applications of multilayered nanowires(MNWs)urge researchers to understand their mechanical behaviors comprehensively.Using the molecular dynamic simulation,tensile behaviors of Ti/Ni MNWs are investigated under a series of layer thickness values(1.31,2.34,and 7.17 nm)and strain rates(1.0×10^(8)s^(-1)≤ε≤5.0×10^(10)s^(-1)).The results demonstrate that deformation mechanisms of isopachous Ti/Ni MNWs are determined by the layer thickness and strain rate.Four distinct strain rate regions in the tensile process can be discovered,which are small,intermediate,critical,and large strain rate regions.As the strain rate increases,the initial plastic behaviors transform from interface shear(the shortest sample)and grain reorientation(the longest sample)in small strain rate region to amorphization of crystalline structures(all samples)in large strain rate region.Microstructure evolutions reveal that the disparate tensile behaviors are ascribed to the atomic fractions of different structures in small strain rate region,and only related to collapse of crystalline atoms in high strain rate region.A layer thickness-strain rate-dependent mechanism diagram is given to illustrate the couple effect on the plastic deformation mechanisms of the isopachous nanowires.The results also indicate that the modulation ratio significantly affects the tensile properties of unequal Ti/Ni MNWs,but barely affect the plastic deformation mechanisms of the materials.The observations from this work will promote theoretical researches and practical applications of Ti/Ni MNWs.
基金supported by the project PN-II-ID-PCE-2012-4-0033,contract 13/2013
文摘Different fragments of a hot-rolled and homogenized Cu–Zn–Al shape memory alloy(SMA) were subjected to thermal cycling by means of a differential scanning calorimetric(DSC) device. During thermal cycling, heating was performed at the same constant rate of increasing temperature while cooling was carried out at different rates of decreasing temperature. For each cooling rate, the temperature decreased in the same thermal interval. During each cooling stage, an exothermic peak(maximum) was observed on the DSC thermogram. This peak was associated with forward martensitic transformation. The DSC thermograms were analyzed with PROTEUS software: the critical martensitic transformation start(Ms) and finish(Mf) temperatures were determined by means of integral and tangent methods, and the dissipated heat was evaluated by the area between the corresponding maximum plot and a sigmoid baseline. The effects of the increase in cooling rate, assessed from a calorimetric viewpoint, consisted in the augmentation of the exothermic peak and the delay of direct martensitic transformation. The latter had the tendency to move to lower critical transformation temperatures. The martensite plates changed in morphology by becoming more oriented and by an augmenting in surface relief, which corresponded with the increase in cooling rate as observed by scanning electron microscopy(SEM) and atomic force microscopy(AFM).
文摘Addition of digested sewage sludge at concentrations of 2% and 10% (v/v) to the water increased coughing rate in big head and tilapia (P<0.05). Ventilation rate was significantly decreased (P<0.05) in big head and tilapia at sludge concentrations of 6% and 2% (v/v)respectively. Copper (Cu), cadmium (Cd) and zinc (Zn) are trace metals which are commonly found in sludge. Cu caused a significant increase (P<0.05) in coughing rate in both tilapia and big head at concentrations of 0.3 and 0.2 μg/ml respectively. Zn caused significant increase (P<0.05) in coughing rate only in big head at 2 μg/ml. Neither fish responded to Cd of up to 2μg/ml in the water. However, when the levels of these trace metals in the digested sludge were measured, they were below that which can cause significant changes in the respiratory movements. Therefore, the changes in ventilation and coughing rates after addition of sludge may be due to the presence of substances other than these metals. The results of this experiment provides a guideline to control the level of sludge that can be used in rearing these fresh water fish in ponds
文摘Objective To investigate effect of Pentoxifylline on free flap. Methods Forty Wistar rats were chosen as experimental models and free flaps were harvested from the back of rats,which as pect ratio was 3: 1. Then they were divided into two groups randomly. Group A was as the experimental group,receiving drug treatment.
文摘The seed-setting rate of hybrid rice is general-ly lower than that of conventional varieties.One of the factors explained this phenomenonis the proline concentration in anthers.Fiveconcentrations(30,50,80,120,and240 mg/kg)of exogenous proline were sprayedat meiosis stage of the early hybrid rice combi-nation Shanyou R3-2.Anthers were collected
文摘Objective To investigate the effect of adipose stromal vascular fraction cells(SVFs)on the survival rate of fat ransplantation.Methods 0.5mL autologous fat tissue was mixed with: ① DiI-labeled autologous SVFs (Group A);②