Ultrasonic elastic characteristics of five kinds of metamorphic deformed coals under room temperature and pressure conditions

The calibration of the elastic characteristics of deformed coals is essential for seismic inversion of such units, because the prediction of coal deformation is essential for both mining safety and methane production. Therefore, many samples of broken and mylonitic deformed coal were tested with ultrasonic waves in the laboratory. These samples came from four mining areas: the Huainan, Pingdingshan, Hebi and Jiaozuo coal mines, which present five different metamorphic ranks shown as cylinders striking across circular limits of steel. Under normal pressures and temperatures, ultrasonic P- and S-wave tests show that the velocities, quality factors, and elastic moduli of the deformed coals were greatly reduced compared with undeformed coals. Also, some correlation was found between the P- and S-wave velocities in the deformed coals. However, there is no evidence of linear correlations between velocity and density, velocity and quality factor, or the quality factors of P- and S-waves. Compared with the elastic characteristics of undeformed coals, such as P- and S-wave velocity ratios or Poisson's ratio, those of deformed coals generally decrease and the P-wave quality factors are less than those of S-waves. Moreover, the analysis of the relationship between pore structure and elastic modulus shows a better correlation between the P- and S-wave velocities and effective porosity, pore volume and specific surface area. Also, there are similar relationships between the pore structure and the Young's and shear moduli. However, there are no such correlations with other moduli. Correlations between these elastic moduli, pore structure, coal rank and density were not found for the various samples of deformed coals, which is consistent with only structural destruction occurring in the deformed coals with other physical properties remaining unchanged. The experimental results show that it is possible to predict the deformation of coals with multi-component seismic elastic inversion.

Elastic Characteristics of Digital Cores from Longmaxi Shale Using Lattice Spring Models

Effective medium methods for the attribution of micro-structures to macro elastic properties of shales are important for the prediction of sweet spots in the shale-gas production.With X-ray micro-computed tomography(XMCT),the micro-structures of shale core samples from Longmaxi Formation are visualized and characterized by 3D digital images.As an efficient alternative to conventional effective medium methods for estimating elastic properties,we propose a consistent workflow of lattice spring modeling(LSM)to emulate the digital cores using three types of lattices.Particular attention is paid to investigate the effective Young’s moduli,Poisson’s ratios,and preferred orientations,by uniaxial compression tests along two directions.Within elastic deformation,the impact of lattice arrangements on the anisotropy is even more than those of stress disturbances and micro-structural features.Compared with analytical approximations and theoretical predictions,the LSM numerical scheme shows general applicability for heterogeneous porous rocks.

Modeling and simulation of the static characteristics of diaphragm spring clutches

The diaphragm spring clutch static characteristics to improve the starting quality for cars equipped with automated mechanical transmission （AMT） were modeled and simulated. First, axial stiffness of clutch cushion spring and characteristic curves of diaphragm spring were theoretically and experimentally studied. Then, model of transfer characteristics of the normal force was built, with special conscen on the abrasion of friction discs and the influence of temperature to diaphragm spring. Finally, the model was tested in practical starting for cars equipped with AMT, which showed that the starting quality was significantly improved. The experimental results showed that the proposed model was precise enough to be implemented conveniently.

A comprehensive comparison on vibration and heat transfer of two elastic heat transfer tube bundles

Elastic heat transfer tube bundles are widely used in the field of flow-induced vibration heat transfer enhancement. Two types of mainly used tube bundles, the planar elastic tube bundle and the conical spiral tube bundle were comprehensively compared in the condition of the same shell side diameter. The natural mode characteristics, the effect of fluid-structure interaction, the stress distribution, the comprehensive heat transfer performance and the secondary fluid flow of the two elastic tube bundles were all concluded and compared. The results show that the natural frequency and the critical velocity of vibration buckling of the planar elastic tube bundle are larger than those of the conical spiral tube bundle, while the stress distribution and the comprehensive heat transfer performance of the conical spiral tube bundle are relatively better.

ON FREE WAVE PROPAGATION IN ANISOTROPIC LAYERED MEDIA

The method of reverberation-ray matrix （MRRM） is extended and modified for the analysis of free wave propagation in anisotropic layered elastic media. A general, numerically stable formulation is established within the state space framework. The compatibility of physical variables in local dual coordinates gives the phase relation, from which exponentially growing functions are excluded. The interface and boundary conditions lead to the scattering relation, which avoids matrix inversion operation. Numerical examples are given to show the high accuracy of the present MRRM.

NONLINEAR BENDING OF CORRUGATED DIAPHRAGM WITH LARGE BOUNDARY CORRUGATION UNDER COMPOUND LOAD

By using the simplified Reissner's equation of axisymmetric shells of revolution, the nonlinear bending of a corrugated annular plate with a large boundary corrugation and a nondeformable rigid body at the center under compound load are investigated. The nonlinear boundary value problem of the corrugated diaphragm reduces to the nonlinear integral equations by applying the method of Green's function. To solve the integral equations, a so_called interpolated parameter important to prevent divergence is introduced into the iterative format. Computation shows that when loads are small, any value of interpolated parameter can assure the convergence of iteration. Interpolated parameter equal or almost equal to 1 yields a faster convergence rate; when loads are large, interpolated parameter cannot be taken too large in order to assure convergence. The characteristic curves of the corrugated diaphragm for different load combinations are given. The obtained characteristic curves are available for reference to design. It can be concluded that the deflection is larger when the diaphragm is acted by both uniform load and concentrated load than when it is acted only by uniform load. The solution method can be applied to corrugated shells of arbitrary diametral sections.

The use of point load test for Dubai weak calcareous sandstones

Intact rock is typically described according to its uniaxial compressive strength （UCS）. The UCS is needed in the design of geotechnical engineering problems including stability of rock slopes and design of shallow and deep foundations resting on and/or in rocks. Accordingly, a correct measure-ment/evaluation of the UCS is essential to a safe and economic design. Typically, the UCS is measured using the unconfined compression tests performed on cylindrical intact specimens with a minimum length to width ratio of 2. In several cases, especially for weak and very weak rocks, it is not possible to extract intact specimens with the needed minimum dimensions. Thus, alternative tests （e.g. point load test, Schmidt hammer） are used to measure rock strength. The UCS is computed based on the results of these tests through empirical correlations. The literature includes a plethora of these correlations that vary widely in estimating rock strength. Thus, it is paramount to validate these correlations to check their suitability for estimating rock strength for a specific location and geology. A review of the available correlations used to estimate the UCS from the point load test results is performed and summarized herein. Results of UCS, point load strength index and Young＇s modulus are gathered for calcareous sandstone specimens extracted from the Dubai area. A correlation for estimating the UCS from the point load strength index is proposed. Furthermore, the Young＇s modulus is correlated to the UCS.

METHOD OF GREEN’S FUNCTION OF CORRUGATED SHELLS

By using the fundamental equations of axisymmetric shallow shells of revolution, the nonlinear bending of a shallow corrugated shell with taper under arbitrary load has been investigated. The nonlinear boundary value problem of the corrugated shell was reduced to the nonlinear integral equations by using the method of Green＇s function. To solve the integral equations, expansion method was used to obtain Green＇s function. Then the integral equations were reduced to the form with degenerate core by expanding Green＇s function as series of characteristic function. Therefore, the integral equations become nonlinear algebraic equations. Newton＇ s iterative method was utilized to solve the nonlinear algebraic equations. To guarantee the convergence of the iterative method, deflection at center was taken as control parameter. Corresponding loads were obtained by increasing deflection one by one. As a numerical example,elastic characteristic of shallow corrugated shells with spherical taper was studied.Calculation results show that characteristic of corrugated shells changes remarkably. The snapping instability which is analogous to shallow spherical shells occurs with increasing load if the taper is relatively large. The solution is close to the experimental results.