With the continuous improvement of industrial automation in our country and the use of high technology, promoted the scientific content of traditional industry. The development of electric automation control system in...With the continuous improvement of industrial automation in our country and the use of high technology, promoted the scientific content of traditional industry. The development of electric automation control system inevitably turn towards a systematic, comprehensive development direction. This article first analyze the present problems in electrical automation monitoring system, analyzes its future development trends, so as to provide some reference for the effective application of electrical automation in the future monitoring system, fundamentally realize the resources sharing.展开更多
As science and technology continue to progress forward,electrical automation engineering is also developing,of which programmable logic controller(PLC)technology is widely being used.Through the integration of PLC tec...As science and technology continue to progress forward,electrical automation engineering is also developing,of which programmable logic controller(PLC)technology is widely being used.Through the integration of PLC technology and traditional electrical automation technology,good development of modern science and technology is promoted while traditional automation is preserved.The development of electrical engineering can greatly improve the strength of science,technology,and economy in our country.Based on PLC technology,this paper analyzes the design of electrical automation control.展开更多
Aiming at the comparatively laggard level of power plant electrical system automation, this paper analyzes the feasibility,necessity and some key points of the application of integrated automation technology to power ...Aiming at the comparatively laggard level of power plant electrical system automation, this paper analyzes the feasibility,necessity and some key points of the application of integrated automation technology to power plant electrical system. New idea using fieldbus control system technology is presented. This paper also gives the outline and detailed schemes.展开更多
The electrical stimulation systems dedicated to generating unconventional waveforms have been shown to have a positive effect in the treatment of channelopathies, for example, in open-angle glaucoma. However, these si...The electrical stimulation systems dedicated to generating unconventional waveforms have been shown to have a positive effect in the treatment of channelopathies, for example, in open-angle glaucoma. However, these signals can be distorted due to different external circumstances, which could lead to counterproductive effects in treatments such as increased intraocular pressure IOP or other effects that are unknown due to poor electrical signaling. In the present work, a web control system capable of communicating with transcorneal electrical stimulation equipment is proposed for the remote control of treatments applied to patients suffering from various ocular channelopathies. As the first phase of this system, it will only focus on treating patients with open-angle glaucoma since this disease is characterized by an increase in IOP and can be immediately measured by an ophthalmologist.展开更多
Due to the complexity of modern industrial systems, a conventional automation system is not capable of providing sufficient information management and high-level intelligent approaches, as achieving these functionalit...Due to the complexity of modern industrial systems, a conventional automation system is not capable of providing sufficient information management and high-level intelligent approaches, as achieving these functionalities requires the support of comprehensive data management and coordination between system devices and heterogenous information. This paper proposes the concept of e-Automation, in which computer networking and distributed intelligence agent technologies are applied to industrial automation systems, and presents a hardware and software architecture that implements this concept. An open infrastructure based on multi-agent systems is employed in the proposed architecture of e-Automation, which aims to allow the implementation of diverse tasks and to permit greater configurability than can be obtained from a traditional system. To evaluate our proposed e-Automation concept, this paper presents a case study of substation information management which adopts the proposed e-Automation architecture in power system domain.展开更多
Αcloud-based home electricity data-monitoring system,which is based on an Arduino Mega controller,is proposed for monitoring the electricity consumption(electrical power)and power quality(PQ)in home.This system is al...Αcloud-based home electricity data-monitoring system,which is based on an Arduino Mega controller,is proposed for monitoring the electricity consumption(electrical power)and power quality(PQ)in home.This system is also capable of monitoring the fundamental frequency and supply-voltage transients to ensure that the appliances operate in a safe operation range.The measured data(voltage and current)are transmitted through a Wi Fi device between the Arduino controller and server.The transmission control protocol(TCP)server is set up to acquire the high-data transmission rate.The server system immediately displays the calculated parameters and the waveform of the acquired signal.A comparison with a standard measurement device shows that the proposed system,which can be built at a low cost,exhibits the same functions as a factory product.展开更多
文摘With the continuous improvement of industrial automation in our country and the use of high technology, promoted the scientific content of traditional industry. The development of electric automation control system inevitably turn towards a systematic, comprehensive development direction. This article first analyze the present problems in electrical automation monitoring system, analyzes its future development trends, so as to provide some reference for the effective application of electrical automation in the future monitoring system, fundamentally realize the resources sharing.
基金2021 Guangxi Electrical Polytechnic Institute Scientific Research Capability Enhancement Project:Research and development based on Siemens 1200 Visual Material Sorting device(Project No.2021KY03)。
文摘As science and technology continue to progress forward,electrical automation engineering is also developing,of which programmable logic controller(PLC)technology is widely being used.Through the integration of PLC technology and traditional electrical automation technology,good development of modern science and technology is promoted while traditional automation is preserved.The development of electrical engineering can greatly improve the strength of science,technology,and economy in our country.Based on PLC technology,this paper analyzes the design of electrical automation control.
文摘Aiming at the comparatively laggard level of power plant electrical system automation, this paper analyzes the feasibility,necessity and some key points of the application of integrated automation technology to power plant electrical system. New idea using fieldbus control system technology is presented. This paper also gives the outline and detailed schemes.
文摘The electrical stimulation systems dedicated to generating unconventional waveforms have been shown to have a positive effect in the treatment of channelopathies, for example, in open-angle glaucoma. However, these signals can be distorted due to different external circumstances, which could lead to counterproductive effects in treatments such as increased intraocular pressure IOP or other effects that are unknown due to poor electrical signaling. In the present work, a web control system capable of communicating with transcorneal electrical stimulation equipment is proposed for the remote control of treatments applied to patients suffering from various ocular channelopathies. As the first phase of this system, it will only focus on treating patients with open-angle glaucoma since this disease is characterized by an increase in IOP and can be immediately measured by an ophthalmologist.
基金The work was supported by The National Grid Company plc,UK.
文摘Due to the complexity of modern industrial systems, a conventional automation system is not capable of providing sufficient information management and high-level intelligent approaches, as achieving these functionalities requires the support of comprehensive data management and coordination between system devices and heterogenous information. This paper proposes the concept of e-Automation, in which computer networking and distributed intelligence agent technologies are applied to industrial automation systems, and presents a hardware and software architecture that implements this concept. An open infrastructure based on multi-agent systems is employed in the proposed architecture of e-Automation, which aims to allow the implementation of diverse tasks and to permit greater configurability than can be obtained from a traditional system. To evaluate our proposed e-Automation concept, this paper presents a case study of substation information management which adopts the proposed e-Automation architecture in power system domain.
基金supported by MOST under Grant No.106-2221-E-468-011-MY2。
文摘Αcloud-based home electricity data-monitoring system,which is based on an Arduino Mega controller,is proposed for monitoring the electricity consumption(electrical power)and power quality(PQ)in home.This system is also capable of monitoring the fundamental frequency and supply-voltage transients to ensure that the appliances operate in a safe operation range.The measured data(voltage and current)are transmitted through a Wi Fi device between the Arduino controller and server.The transmission control protocol(TCP)server is set up to acquire the high-data transmission rate.The server system immediately displays the calculated parameters and the waveform of the acquired signal.A comparison with a standard measurement device shows that the proposed system,which can be built at a low cost,exhibits the same functions as a factory product.
