NOVEL AIRCRAFT ELECTRICAL POWER DISTRIBUTION SYSTEM BASED ON DISTRIBUTED COMPUTER

As a matured technique used in many fields,the distributed computer system is still a new management method for the aeronautical electrical power distribution system in our country. In this paper, a novel aircraft electrical power distribution system based on the distributed computer system is proposed. The principles, features and structure of the aircraft electrical power distribution system and the distributed computer system named electrical load management system (ELMS) are studied. The ELMS composed of four electrical load management centers (ELMCs) and two power source processors (PSPs) operates in the 1553B buses. Principles of the ELMCs and the PSPs are introduced. With the application of the distributed computer system, the aircraft electrical power distribution system is simple, adaptable and flexible.

Development and Implementation of GSM-Based Distribution Automation System with Graphic User Interface in Nigeria Electric Power Distribution Network

Lack of up-to-date information on efficient operation and maintenance of EPDS （electric power distribution systems）, Nigeria is addressed by designing and implementing an indigenous real-time monitoring and diagnosis system. The system encompasses the development of software driven hardware positioned at the remotely located sub-stations at the low voltage level to keep track of the network in real-time. The detection of faults exploits threshold passing algorithm through continuous monitoring of the network power quality. Communication between the RTU （remote terminal unit） and the DCC （distribution control center） which is based on GSM is initiated by disturbance. The DCC performs fault evaluation processing using the received data and predetermined faults signatures to determine the nature of disturbance and presents the result in graphic user interface environment. A fault reporting time of 2 s was achieved. The developed system exhibits a high degree of accuracy and manifests no spurious reports during testing. The resultant system limits the effects of interruption and increases power availability by reducing the down time. The system strengthens engineering and management capabilities required to enhance reliability by providing information about the network health status.

Distributed Secondary Control and Optimal Power Sharing in Microgrids

We address the control problem of microgrids and present a fully distributed control system which consists of primary controller, secondary controller, and optimal active power sharing controller. Different from the existing control structure in microgrids, all these controllers are implemented as local controllers at each distributed generator. Thus, the requirement for a central controller is obviated. The performance analysis of the proposed control systems is provided, and the finite-time convergence properties for distributed secondary frequency and voltage controllers are achieved. Moreover, the distributed control system possesses the optimal active power sharing property. In the end, a microgrid test system is investigated to validate the effectiveness of the proposed control strategies. © 2014 Chinese Association of Automation.

Global Harmonic Rate Assessment in the Electricity Distribution Network in Niamey City:Case Studies of Domestic,Industrial and Hospital Substations

Like others countries of the world, in Niger also, we are witnessing an increasing use of non-linear electric loads in the domestic, hospital and industrial sectors. However, these loads degrade the shape of the electrical signal and cause disastrous effects to the equipment of the distribution system and the devices which are connected to the network. This article highlights the presence of electric harmonics in the distribution network in Niamey city. In order to do this, measurements were taken at the secondary level of the substations using an energy quality analyze r (FLUKE 1735). By using this measuring instrument, we quantified the voltage and current Total Harmonic Distortion (THD) in the three substations. The results obtained show that, although the statutable rates set by the standards are not exceeded for phase conductors, the neutral contains a very critical percentage of distortion on the residential and hospital substations. Moreover, this assessment made it possible to observe the variation of harmonics in the presence of voltage drops.

Methods and Techniques of Electricity Thieving in Pakistan

The situation of electricity in Pakistan has been alarming from the last ten years. The deficiency in electricity has not only obstructed the business activities but also affected the domestic consumers, educational institutes and hospitals. Usually electrical power companies are liable for electricity shortfall and power interruption. However, electricity end consumers are also equally responsible behind strange shortfall and unusual power interruption. Frequently, the consumers use the heavy electrical equipment in their homes including heaters, geysers, irons and water motors which causes the more electricity consumption, load shedding and huge amount of bills. For escaping the huge amount of electricity bill, the consumers commit the illegal and unethical connections. The illegal usage of electrical power failed the power companies to plan schedule load shedding accordingly and the other side the damaged electricity wires or Pole Mount Transformer increased faults due to overburdening, which directly affected on extend power interruption. In addition that, responsible teams of electrical power companies cannot reach instantly to repair faults and prevent the theft. Electricity thieving is social crime committed by the consumers or meter readers which causes the electricity strange shortfall within country. This paper presents the practical demonstration about the common energy theft methods and techniques done by electricity consumers within their home and residential building. In Pakistan EPC (electrical power companies) deploy the traditional electromechanical meters for electricity consumption measurements, however, these meters do not have any real time communication. Therefore there are many easy ways to manipulate the meter reading as well as internal structural of metering system.

A Stochastic Programming Strategy in Microgrid Cyber Physical Energy System for Energy Optimal Operation

This paper focuses on the energy optimal operation problem of microgrids (MGs) under stochastic environment. The deterministic method of MGs operation is often uneconomical because it fails to consider the high randomness of unconventional energy resources. Therefore, it is necessary to develop a novel operation approach combining the uncertainty in the physical world with modeling strategy in the cyber system. This paper proposes an energy scheduling optimization strategy based on stochastic programming model by considering the uncertainty in MGs. The goal is to minimize the expected operation cost of MGs. The uncertainties are modeled based on autoregressive moving average (ARMA) model to expose the effects of physical world on cyber world. Through the comparison of the simulation results with deterministic method, it is shown that the effectiveness and robustness of proposed stochastic energy scheduling optimization strategy for MGs are valid. © 2014 Chinese Association of Automation.

A Multi-Criteria Optimization Method for Electrical Distribution System and Its Analysing in Practice

In this paper, the author explains the problem that we have to consider multiple goals and multiple factors which are usually affected by others at the same time in practical work for electrical power distribution system programming. A new mathematics model is set up here for the multiple goals programming of electrical power distribution system which includes various load control alternatives. An arithmetic and current software for the multi-criteria optimization of electrical power distribution system are given here. The author calculates and analyses the optimal programming projects and the optimal operation strategies for a practical system, which show that the model, the arithmetic and the current software are all correct and effective. The outcome of researches has been adopted by the authoritative persons.

Some new results of electric power science

At present, one of the most important demands in the world is energy. And improvement of technology and management can increase energy efficiency [1]. Compared with coal and oil, electricity is a kind of clean and efficient secondary energy. The development of the electric power science is essential for the human world and its new results are also remarkable. A modem power system has a very complex control structure, and is generally composed of hundreds of thousands of components. Consequently, it is very difficult and arduous to control and manage a modem power system to make it reliably and securely provide high quality yet economic power supply.