Electromagnetic pulses produced by a picosecond laser interacting with solid targets

A high-power laser ablating solid targets induces giant electromagnetic pulses(EMPs),which are intimately pertinent to laser parameters,such as energy and pulse width.In this study,we reveal the features of EMPs generated from a picosecond(ps)laser irradiating solid targets at the SG-Ⅱpicosecond petawatt(PSPW)laser facility.The laser energy and pulse,as well as target material and thickness,show determinative effects on the EMPs’amplitude.More intense EMPs are detected behind targets compared to those at the other three positions,and the EMP amplitude decreases from 90.09 kV/m to 17.8 kV/m with the gold target thickness increasing from 10μm to 20μm,which is suppressed when the laser pulse width is enlarged.The results are expected to provide more insight into EMPs produced by ps lasers coupling with targets and lay the foundation for an effective EMP shielding design in high-power laser infrastructures.

Effect and mechanism of on-chip electrostatic discharge protection circuit under fast rising time electromagnetic pulse

The electrostatic discharge(ESD)protection circuit widely exists in the input and output ports of CMOS digital circuits,and fast rising time electromagnetic pulse(FREMP)coupled into the device not only interacts with the CMOS circuit,but also acts on the protection circuit.This paper establishes a model of on-chip CMOS electrostatic discharge protection circuit and selects square pulse as the FREMP signals.Based on multiple physical parameter models,it depicts the distribution of the lattice temperature,current density,and electric field intensity inside the device.At the same time,this paper explores the changes of the internal devices in the circuit under the injection of fast rising time electromagnetic pulse and describes the relationship between the damage amplitude threshold and the pulse width.The results show that the ESD protection circuit has potential damage risk,and the injection of FREMP leads to irreversible heat loss inside the circuit.In addition,pulse signals with different attributes will change the damage threshold of the circuit.These results provide an important reference for further evaluation of the influence of electromagnetic environment on the chip,which is helpful to carry out the reliability enhancement research of ESD protection circuit.

Generation and regulation of electromagnetic pulses generated by femtosecond lasers interacting with multitargets

Ultrashort and powerful laser interactions with a target generate intense wideband electromagnetic pulses(EMPs).In this study,we report EMPs generated by the interactions between petawatt(30 fs,1.4×10^(20) W/cm^(2))femtosecond(fs)lasers with metal flat,plastic flat,and plastic nanowire-array(NWA)targets.Detailed analyses are conducted on the EMPs in terms of their spatial distribution,time and frequency domains,radiation energy,and protection.The results indicate that EMPs from metal targets exhibit larger amplitudes at varying angles than those generated by other types of targets and are enhanced significantly for NWA targets.Using a plastic target holder and increasing the laser focal spot can significantly decrease the radiation energy of the EMPs.Moreover,the composite shielding materials indicate an effective shielding effect against EMPs.The simulation results show that the NWA targets exert a collimating effect on thermal electrons,which directly affects the distribution of EMPs.This study provides guidance for regulating EMPs by controlling the laser focal spot,target parameters,and target rod material and is beneficial for electromagnetic-shielding design.

Spatial and temporal evolution of electromagnetic pulses from solid target irradiated with multi-hundred-terawatt laser pulse inside target chamber

Giant electromagnetic pulses(EMPs) induced by high-power laser irradiating solid targets interfere with various experimental diagnoses and even damage equipment,so unveiling the evolution of EMPs inside the laser chamber is crucial for designing effective EMP shielding.In this work,the transmission characteristics of EMPs as a function of distances from the target chamber center(TCC) are studied using B-dot probes.The mean EMP amplitude generated by picosecond laser-target interaction reaches 561 kV m^(-1),357 kV m^(-1),395 kV m^(-1),and 341 kV m^(-1)at 0.32 m,0.53 m,0.76 m,and 1 m from TCC,which decreases dramatically from 0.32 m to 0.53 m.However,it shows a fluctuation from 0.53 m to 1 m.The temporal features of EMPs indicate that time-domain EMP signals near the target chamber wall have a wider full width at half maximum compared to that close to TCC,mainly due to the echo oscillation of electromagnetic waves inside the target chamber based on simulation and experimentation.The conclusions of this study will provide a new approach to mitigate strong electromagnetic pulses by decreasing the echo oscillation of electromagnetic waves inside the target chamber during laser coupling with targets.

Detrimental Effect of Electromagnetic Pulse Exposure on Permeability of In Vitro Blood-brain-barrier Model

Objective To study the effect of electromagnetic pulse （EMP） exposure on permeability of in vitro blood-brain-barrier （BBB） model. Methods An in vitro BBB model, established by co-culturing brain microvascular endothelial cells （BMVEC） and astroglial cells （AC） isolated from rat brain, was exposed to EMP at 100 kV/m and 400 kV/m, respectively. Permeability of the model was assayed by measuring the transendothelial electrical resistance （TEER） and the horseradish peroxidase （HRP） transmission at different time points. Levels of BBB tight junction-related proteins were measured at O, 1, 2, 4, 8, 12, 16, 20, 24 h after EMP exposure by Western blotting. Results The TEER level was lower in BBB model group than in control group at 12 h after EMP, exposure which returned to its normal level at 24 h. The 24 h recovery process was triphasic and biphasic respectively after EMP exposure at 100 kV/m and 400 kV/m. Following exposure to 400 kV/m EMP, the HRP permeability increased at 1-12 h and returned to its normal level at 24 h. Western blotting showed that the claudin-5 and ZO-1 protein levels were changed after EMP exposure. Conclusion EMP exposure at 100 kV/m and 400 kV/m can increase the permeability of in vitro BBB model and BBB tight junction-related proteins such as ZO-1 and claudin-5 may change EMP-induced BBB permeability.

Effect of Electromagnetic Pulse Exposure on Brain Micro Vascular Permeability in Rats

Objective To observe the effect of electromagnetic pulse (EMP) exposure on cerebral micro vascular permeability in rats. Methods The whole-body of male Sprague-Dawley rats were exposed or sham exposed to 200 pulses or 400 pulses (1 Hz) of EMP at 200 kV/m. At 0.5, 1, 3, 6, and 12 h after EMP exposure, the permeability of cerebral micro vascular was detected by transmission electron microscopy and immunohistochemistry using lanthanum nitrate and endogenous albumin as vascular tracers, respectively. Results The lanthanum nitrate tracer was limited to the micro vascular lumen with no lanthanum nitrate or albumin tracer extravasation in control rat brain. After EMP exposure, the lanthanum nitrate ions reached the tight junction, basal lamina and pericapillary tissue. Similarly, the albumin immunopositive staining was identified in pericapillary tissue. The changes in brain micro vascular permeability were transient, the leakage of micro vascular vessels appeared at 1 h, and reached its peak at 3 h, and nearly recovered at 12 h, after EMP exposure. In addition, the leakage of micro vascular was more obvious after exposure of EMP at 400 pulses than after exposure of EMP at 200 pulses. Conclusion Exposure to 200 and 400 pulses (1 Hz) of EMP at 200 kV/m can increase cerebral micro vascular permeability in rats, which is recoverable.

Development of gated fiber detectors for laser-induced strong electromagnetic pulse environments

With the development of laser technologies,nuclear reactions can happen in high-temperature plasma environments induced by lasers and have attracted a lot of attention from different physical disciplines.However,studies on nuclear reactions in plasma are still limited by detecting technologies.This is mainly due to the fact that extremely high electromagnetic pulses(EMPs)can also be induced when high-intensity lasers hit targets to induce plasma,and then cause dysfunction of many types of traditional detectors.Therefore,new particle detecting technologies are highly needed.In this paper,we report a recently developed gated fiber detector which can be used in harsh EMP environments.In this prototype detector,scintillating photons are coupled by fiber and then transferred to a gated photomultiplier tube which is located far away from the EMP source and shielded well.With those measures,the EMPs can be avoided which may result that the device has the capability to identify a single event of nuclear reaction products generated in laser-induced plasma from noise EMP backgrounds.This new type of detector can be widely used as a time-of-flight(TOF)detector in high-intensity laser nuclear physics experiments for detecting neutrons,photons,and other charged particles.

Effect of Electromagnetic Pulse Exposure on Permeability of Blood-testicle Barrier in Mice

Objective To study the effect of electromagnetic pulse （EMP） exposure on the permeability of blood-testicle barrier （BTB） in mice. Methods Adult male BALB/c mice were exposed to EMP at 200 kV/m for 200 pulses with 2 seconds interval. The mice were injected with 2% Evans Blue solution through caudal vein at different time points after exposure, and the permeability of BTB was monitored using a fluorescence microscope. The testis sample for the transmission electron microscopy was prepared at 2 h after EMP exposure. The permeability of BTB in mice was observed by using Evans Blue tracer and lanthanum nitrate tracer. Results After exposure, cloudy Evans Blue was found in the testicle convoluted seminiferous tubule of mice. Lanthanum nitrate was observed not only between testicle spermatogonia near seminiferous tubule wall and sertoli cells, but also between sertoli cells and primary spermatocyte or secondary spermatocyte. In contrast, lanthanum nitrate in control group was only found in the testicle sertoli cells between seminiferous tubule and near seminifdrous tubule wall. Conclusion EMP exposure could increase the permeability of BTB in the mice.

Analysis of the damage threshold of the GaAs pseudomorphic high electron mobility transistor induced by the electromagnetic pulse

An electromagnetic pulse（EMP）-induced damage model based on the internal damage mechanism of the Ga As pseudomorphic high electron mobility transistor（PHEMT） is established in this paper. With this model, the relationships among the damage power, damage energy, pulse width and signal amplitude are investigated. Simulation results show that the pulse width index from the damage power formula obtained here is higher than that from the empirical formula due to the hotspot transferring in the damage process of the device. It is observed that the damage energy is not a constant, which decreases with the signal amplitude increasing, and then changes little when the signal amplitude reaches up to a certain level.

Electromagnetic Pulses Generated From Laser Target Interactions at Shenguang Ⅱ Laser Facility

Significant electromagnetic pulses （EMP） can be generated by the intensive laser irradiating solid targets in inertial confinement fusion （ICF）. To evaluate the EMP intensity and distribution in and outside the laser chamber, we designed and fabricated a discone antenna with ultra-wide bands of over 10 GHz. The return loss （Sn parameter） of this antenna was below -10 dB and could even achieve under -30 dB at 3.1 GHz. The EMP intensity in this study at 80 cm and 40 cm away from the target chamber center （TCC） reached 400 kV/m and 2000 kV/m. The current results are expected to offer preliminary information to study physics regarding laser plasma interactions and will also lay experimental foundation for EMI shielding design to protect various diagnostics.

Effects of Electromagnetic Pulse on Bone Metabolism of Mice in vivo

Objective To study the effects of electromagnetic pulse （EMP） on bone metabolism of mice in vivo. Methods Twenty-four male BALB/c mice were divided into a control group and 2 experimental groups （n=8）. The whole-body of mice in experimental groups were exposed to 50 kV/m and 400kV/m EMP, 400 pulses daily for 7 consecutive days at 2 seconds intervals. Alkaline phosphotase （ALP） activity, serum calcium concentration and osteocalcin level and trabecular bone volume （BV/TV, %） were measured immediately after EMP exposure by biochemical, ELISA and morphological methods. Results The ALP activity, serum calcium concentration and osteocalcin level and BV/TV in experimental groups remained unchanged after EMP exposure. Conelusion Under our experimental conditions, EMP exposure cannot affect bone metabolism of mice in vivo.

Spatial and temporal evolution of electromagnetic pulses generated at Shenguang-Ⅱseries laser facilities

The distribution and sources of EMPs produced at Shenguang-Ⅱ(SG-Ⅱ)series laser facilities are systematically investigated.The results indicate that the EMP amplitudes in the SG-Ⅱps PW laser are very strong,one order higher than those from the SG-Ⅱlaser facility.EMPs outside the target chamber decrease exponentially with the distance from the measuring points to the target chamber center at the two laser facilities.Moreover,EMPs can be remarkably reduced when the picosecond laser together with the nanosecond laser is incident to targets compared to the SG-Ⅱps PW laser alone.The resulting conclusions are expected to offer experimental supports for further effective EMPs shielding design and achievement in high-power laser facilities.

Damage effect and mechanism of the GaAs pseudomorphic high electron mobility transistor induced by the electromagnetic pulse

The damage effect and mechanism of the electromagnetic pulse （EMP） on the GaAs pseudomorphic high electron mobility transistor （PHEMT） are investigated in this paper. By using the device simulation software, the distributions and variations of the electric field, the current density and the temperature are analyzed. The simulation results show that there are three physical effects, i.e., the forward-biased effect of the gate Schottky junction, the avalanche breakdown, and the thermal breakdown of the barrier layer, which influence the device current in the damage process. It is found that the damage position of the device changes with the amplitude of the step voltage pulse. The damage appears under the gate near the drain when the amplitude of the pulse is low, and it also occurs under the gate near the source when the amplitude is sufficiently high, which is consistent with the experimental results.

Gene Expression Changes in the Pituitary Gland of Rats Exposed to Electromagnetic Pulses

Objective We examined alterations in the expression of tumorigenesis‐related genes in the pituitary gland of rats exposed to electromagnetic pulses （EMP）.Methods The global gene expression profiles of the pituitary gland in EMP‐exposed and control groups were detected by cDNA microarray analysis.We then validated and further investigated the reduced expression of two tumorigenesis‐related genes,Pten,and Jund,by assessing their mRNA and protein expression by quantitative real‐time‐PCR,western blotting,and immunohistochemistry in the pituitary gland of rats 6 months after exposure to EMP.Results EMP exposure induced genome‐wide gene expression changes in the rat pituitary gland.There was decreased expression of the Pten and Jund mRNAs and proteins in EMP‐exposed rats compared with in unexposed control animals.Conclusion EMP exposure alters the expression of tumorigenesis‐related genes in the pituitary gland.These tumorigenesis‐related genes are potentially involved in the development of pituitary gland tumors in rats.

Analysis of electromagnetic pulses generated from ultrashort laser irradiation of solid targets at CLAPA

Electromagnetic pulses(EMPs)produced by the interaction of a TW femtosecond laser with solid targets at the Compact Laser Plasma Accelerator(CLAPA)are measured and interpreted.The statistical results confirm that the intensities of the EMPs are closely related to both target material and thickness.The signal of the titanium target is more abundant than that of the copper target with the same thickness,and the intensity of EMP is positively correlated with the target thickness for aluminium foil.With the boosted EMP radiations,the energy of accelerated protons is also simultaneously enhanced.In addition,EMPs emitted from the front of the target exceed those from the rear,which are also pertinent to the specific target position.The resonant waveforms in the target chamber are analyzed using the fast Fourier transform,and the local resonance and the attenuation lead to changes of the frequency spectra of EMPs with variation of detecting positions,which is well supported by the modeling results.The findings are beneficial to gaining insight into the mechanism of EMP propagation in a typical target chamber and providing more information for EMP shielding design.

Simulation of electromagnetic pulses generated by escaped electrons in a high-power laser chamber

Intensive electromagnetic pulses （EMPs） can be generated when a high-power laser strikes a target. The transient electromagnetic field can have an intensity of up to several hundred kV m- 1 with a broad frequency of up to several gigahertz, which may affect diagnostics and interfere with, or even damage, electronic equipment. In this paper, the process in which hot electrons produced by the laser-target interaction radiate EMPs is studied and simulated. The physical process is divided into three stages which are： the production of hot electrons; the escape of hot electrons; and the generation of EMPs. Instead of using a general finite difference time domain （FDTD） method to solve the Maxwell equations, a particle-in-cell method together with a time- biased FDTD method is applied in EMP simulation to restrain high-frequency noise. The results show that EMPs are stronger with higher laser intensity and larger target size.

The Effects of Electromagnetic Pulse on the Protein Levels of Tight Junction Associated-Proteins in the Cerebral Cortex,Hippocampus,Heart,Lung,and Testis of Rats

Objective To investigate changes in the expression of tight junction （TJ） proteins in the cerebral cortex,hippocampus,heart,lung,and testes of rats after exposure to electromagnetic pulse （EMP）.Methods Eighteen adult male Sprague-Dawley rats were divided into sham and exposure groups.The exposure groups received EMP at 200 kV/m for 200 pulses with a repetition rate of 1 Hz.The expression of TJ proteins （ZO-1,occludin,actin） in the several organs was examined by western blotting.Results ZO-1 levels in the cerebral cortex decreased 1 h and 3 h after EMP exposure compared with sham group （P0.05）.No significant difference was observed for occludin and actin.ZO-1 levels in the hippocampus increased 1 h and 3 h post-exposure （P0.05）,and occludin decreased after 3 h （P0.05）;however,actin was unaffected.ZO-1 levels in the heart increased 3 h post-exposure （P0.05）,occludin decreased 3 h post-exposure （P0.05）,and actin increased 1 h and 3 h post-exposure （P0.05）.ZO-1,occludin and actin levels in the lung decreased compared with those in the sham group （P0.05）.ZO-1 and occludin levels in the testes decreased 1 h and 3 h post-exposure （P0.05）,but actin showed no significant change.Conclusion Exposure to EMP altered the expression levels of TJ proteins,particularly ZO-1,in the organs of adult male rats,which may induce changes in barrier structure and function.

Numerical simulation of the coupling of ultra-wide band electromagnetic pulse into landmine by aperture

The modern landmine＇s electronic fuse is susceptible to strong interference or can even be damaged by the ultra-wide band electromagnetic pulse（UWB-EMP）. The finite-difference time-domain（FDTD） method in lossy media with cylindrical coordinates is used to study the interactions of the UWB-EMP with the landmine. First, the coupling of UWB-EMP into the landmine shielding shell through an aperture is numerically simulated. Second, the coupled electromagnetic field of mine shells made of different shielding materials and with apertures of different sizes is plotted. Third, the aperture coupling laws of UWB-EMP into shells are analyzed and categorized. Such an algorithm is capable of effectively preventing ladder similar errors, and consequently improving the calculation precision, and in addition to adopting the message passing interface（MPI） parallel method to divide the total calculating range into more sub-ranges, the overall calculating efficiency is greatly increased. These calculations are surely a constructive reference for modern landmine design against electromagnetic damage.

Far-zone behaviors of scattering-induced statistical properties of partially polarized spatially and spectrally partially coherent electromagnetic pulsed beam

In this study, we explore the far-zero behaviors of a scattered partially polarized spatially and spectrally partially coherent electromagnetic pulsed beam irradiating on a deterministic medium. The analytical formula for the cross-spectral density matrix elements of this beam in the spherical coordinate system is derived. Within the framework of the first-order Born approximation, the effects of the scattering angle θ, the source parameters (i.e., the pulse duration T0 and the temporal coherence length Tcxx), and the scatterer parameter (i.e., the effective width of the medium σR) on the spectral density, the spectral shift, the spectral degree of polarization, and the degree of spectral coherence of the scattered source in the far-zero field are studied numerically and comparatively. Our work improves the scattering theory of stochastic electromagnetic beams and it may be useful for the applications involving the interaction between incident light waves and scattering media.

Effect of the Welding Parameters on the Structural and Mechanical Properties of Aluminium and Copper Sheet Joints by Electromagnetic Pulse Welding

Aluminium-copper hybrid parts, as a substitution to copper parts, result in weight and cost reduction, and are relevant in applications related to the electronic, heating and cooling sector. However, aluminium to copper joined by thermal welding processes presents challenges in terms of achieving good joint quality. This is attributed to their dissimilar mechanical and thermal properties which result in large stress gradients during heating. This study investigated joining of aluminium to copper sheets by electromagnetic pulse welding, which is a solid-state process that uses electromagnetic forces for joining of dissimilar materials. Hybrid sheet welds were obtained for all parameters conditions, selected according to a Taguchi L18 design. The structural and mechanical characteristics were examined and related to the welding parameters by means of a Pareto analysis and response graphs. The welded zone started with a wavy interface with interfacial layers and defects and evolved to a flat interface without interfacial layers. The maximum transferable force depended on the minimum specimen thickness and the strength of the hybrid sheet weld. In case of aluminium sheet thickness reduction, the maximum transferable force was linearly correlated with the aluminium sheet thickness. High quality joints were obtained for no aluminium sheet thickness reduction and for a sheet weld strength which was at least as high as that of the base material. The most effective way to increase the transferable force was to lower the initial gap and to increase the free length, which resulted in no aluminium sheet thickness reduction. Alternatively, the use of a rounded spacer decreased the effect of the aluminium sheet thickness on the transferable force. An increase in weld width was achieved for an increase in capacitor charging energy and gap, whereas an increase in weld length was obtained for a decrease in gap. An increase in weld width did not necessarily result in an increase in the transferable force. In the regarded cases, a hybrid sheet with narrow weld width could therefore have higher quality.