In this work, a Fe-based nanocrystalline microwire of 20 mm in length and 25 μm in diameter was placed in the center of a 316 stainless steel pipe. The pipe was 500 μm in diameter and a little shorter than the micro...In this work, a Fe-based nanocrystalline microwire of 20 mm in length and 25 μm in diameter was placed in the center of a 316 stainless steel pipe. The pipe was 500 μm in diameter and a little shorter than the microwire. A series of voltages were applied on the pipe to study the influence of the electrical field on the Giant-Magneto-Impedance(GMI) effect of the microwire. Experimental results showed that the electronic field between the wire and the pipe reduced the hysteresis of the GMI effect. The results were explained based on equivalent circuit and eddy current consumptions analysis.展开更多
Objective To test a quality assurance(QA)DVS solution-DVS based on a linac electronic field imaging device(EPID)and evaluate its accuracy and ease of use.Methods All of the QA items that do not require the dedicated Q...Objective To test a quality assurance(QA)DVS solution-DVS based on a linac electronic field imaging device(EPID)and evaluate its accuracy and ease of use.Methods All of the QA items that do not require the dedicated QA phantom in the DVS solution were tested.Test methods were chosen based on the test items:for the collimator rotation center,the coincidence of the radiation and mechanical,mechanical flatness/symmetry and MLC transmission were compared with the existing QA solution;for the leaf position accuracy and repeatability,the original preset beam fields and fields adjusted by 1 mm were compared.Results The collimator rotation center by the DVS solution is similar to the existing solution.For coincidence of radiation and mechanical,the DVS solution provides more data,including 3D distance.For the flatness/symmetry property,the DVS solution can display more graphics,but the overall data is less than the ion-chamber matrix solution.The DVS solution can directly obtain the MLC transmission value and quickly and intuitively measure the position accuracy of the MLC.However,the repeatability is slightly worse.Conclusion The DVS solution can improve the QA work efficiency and reduce workload,and there are more opportunities for improvement.展开更多
The novelty of this research lies in the successful fabrication of a 3D-printed honeycomb structure filled with nanofillers for acoustic properties,utilizing an impedance tube setup in accordance with ASTM standard E ...The novelty of this research lies in the successful fabrication of a 3D-printed honeycomb structure filled with nanofillers for acoustic properties,utilizing an impedance tube setup in accordance with ASTM standard E 1050-12.The Creality Ender-3,a 3D printer,was used for printing the honeycomb structures,and polylactic acid(PLA)material was employed for their construction.The organic,inorganic,and polymeric compounds within the composites were identified using fourier transformation infrared(FTIR)spectroscopy.The structure and homogeneity of the samples were examined using a field emission scanning electron microscope(FESEM).To determine the sound absorption coefficient of the 3D printed honeycomb structure,numerous samples were systematically developed using central composite design(CCD)and analysed using response surface methodology(RSM).The RSM mathematical model was established to predict the optimum values of each factor and noise reduction coefficient(NRC).The optimum values for an NRC of 0.377 were found to be 1.116 wt% carbon black,1.025 wt% aluminium powder,and 3.151 mm distance between parallel edges.Overall,the results demonstrate that a 3Dprinted honeycomb structure filled with nanofillers is an excellent material that can be utilized in various fields,including defence and aviation,where lightweight and acoustic properties are of great importance.展开更多
In this paper,we report the effect of nitrogen on the deposition and properties of boron doped diamond films synthesized by hot filament chemical vapor deposition.The diamond films consisting of micro-grains(nano-grai...In this paper,we report the effect of nitrogen on the deposition and properties of boron doped diamond films synthesized by hot filament chemical vapor deposition.The diamond films consisting of micro-grains(nano-grains) were realized with low(high) boron source flow rate during the growth processes.The transition of micro-grains to nano-grains is speculated to be strongly(weekly) related with the boron(nitrogen) flow rate.The grain size and Raman spectral feature vary insignificantly as a function of the nitrogen introduction at a certain boron flow rate.The variation of electron field emission characteristics dependent on nitrogen is different between microcrystalline and nanocrystalline boron doped diamond samples,which are related to the combined phase composition,boron doping level and texture structure.There is an optimum nitrogen proportion to improve the field emission properties of the boron-doped films.展开更多
Cu ion implantation and subsequent rapid annealing at 500℃ in N2 result in low surface resistivity of 1.611 ohm/sq with high mobility of 290 cm2 V-1S-1 for microcrystalline diamond (MCD) films. Its electrical field...Cu ion implantation and subsequent rapid annealing at 500℃ in N2 result in low surface resistivity of 1.611 ohm/sq with high mobility of 290 cm2 V-1S-1 for microcrystalline diamond (MCD) films. Its electrical field emission behavior can be turned on at Eo = 2.6 V/μm, attaining a current density of 19.5μA/cm2 at an applied field of 3.5 V/#m. Field emission scanning electron microscopy combined with Raman and x-ray photoelectron mi- croscopy reveal that the formation of Cu nanoparticles in MCD films can catalytically convert the less conducting disorder/a-C phases into graphitic phases and can provoke the formation of nanographite in the films, forming conduction channels for electron transportation.展开更多
SiCN thin films were synthesized by a radio frequency chemical vapor deposition (RFCVD) system on P\|type Si (1 0 0) wafers using C 2 H 4 , SiH 4 and N 2 as raw materials. In order to get rid of the ...SiCN thin films were synthesized by a radio frequency chemical vapor deposition (RFCVD) system on P\|type Si (1 0 0) wafers using C 2 H 4 , SiH 4 and N 2 as raw materials. In order to get rid of the oxygen absorbed on the surface and improve the characteristics of electron field emission, Ar + ions of low energy were used to bombard the samples. The field emission characteristics of SiCN thin films before and after Ar + bombardment were studied in the super vacuum environment of 10 -6 Pa. It was showed that the turn\|on field (defined as the point where the current\|voltage curve shows a sharp increase in the current density) decreased from 38 V/μm before bombardment to 25 V/μm after bombardment. And the maximum emission current density increased from 159.2 to 267.4 μA/cm 2 . The composition before and after Ar + bombardment was compared using X\|ray photoelectron spectroscopy (XPS). Our results illustrated that the field emission characteristics were improved after the bombardment of Ar + .展开更多
The important features of the rescattering trajectories in strong field ionization process such as the cutoff of the return energy at 3.17Up and that of the final energy at 10Up are obtained, based on the adiabatic ap...The important features of the rescattering trajectories in strong field ionization process such as the cutoff of the return energy at 3.17Up and that of the final energy at 10Up are obtained, based on the adiabatic approximation in which the initial momentum of the electron is assumed to be zero. We theoretically study the nonadiabatic effect by assuming a nonzero initial momentum on the rescattering trajectories based on the semiclassical simpleman model. We show that the nonzero initial momentum will modify both the maximal return energy at collision and the final energy after backward scattering, but in different ways for odd and even number of return trajectories. The energies are increased for even number of returns but are decreased for odd number of returns when the nonzero (positive or negative) initial momentum is applied.展开更多
Digital image stabilization technique plays important roles in video surveillance and object acquisition.Many useful electronic image stabilization algorithms have been studied.A real-time algorithm is proposed based ...Digital image stabilization technique plays important roles in video surveillance and object acquisition.Many useful electronic image stabilization algorithms have been studied.A real-time algorithm is proposed based on field image gray projection which enables the regional odd and even field image to be projected into x and y directions and thus to get the regional gray projection curves in x and y directions,respectively.For the odd field image channel,motion parameters can be estimated via iterative minimum absolute difference based on two successive field image regional gray projection curves.Then motion compensations can be obtained after using the Kalman filter method.Finally,the odd field image is adjusted according to the compensations.In the mean time,motion compensation is applied to the even field image channel with the odd field image gray projection curves of the current frame.By minimizing absolute difference between odd and even field image gray projection curves of the current frame,the inter-field motion parameters can be estimated.Therefore,the even field image can be adjusted by combining the inter-field motion parameters and the odd field compensations.Finally,the stabilized image sequence can be obtained by synthesizing the adjusted odd and even field images.Experimental results show that the proposed algorithm can run in real-time and have a good stabilization performance.In addition,image blurring can be improved.展开更多
The carbon nanotube (CNT)-based materials can be used as vacuum device cathodes. Owing to the excellent field emission properties of CNT, it has great potentials in the applications of an explosive field emission ca...The carbon nanotube (CNT)-based materials can be used as vacuum device cathodes. Owing to the excellent field emission properties of CNT, it has great potentials in the applications of an explosive field emission cathode. The falling off of CNT from the substrate, which frequently appears in experiments, restricts its application. In addition, the onset time of vacuum breakdown limits the performance of the high-power explosive-emission-cathode-based diode. In this paper, the characteristics of the CNT, electric field strength, contact resistance and the kind of substrate material are varied to study the parameter effects on the onset time of vacuum breakdown and failure mechanism of the CNT by using the finite element method.展开更多
ZnO films with special textures ave fabricated on Mo-coated Al2O3 ceramic substrates by the catalyst-free electron beam evaporation method, and the as-deposited films are treated by hydrogen plasma. It is found that t...ZnO films with special textures ave fabricated on Mo-coated Al2O3 ceramic substrates by the catalyst-free electron beam evaporation method, and the as-deposited films are treated by hydrogen plasma. It is found that the surface morphologies of the films are changed significantly after hydrogen plasma treatment and that the films consist of vertically standing and intersecting nanosheets. A lower turn-on field of 1.2 V/μm and an enhanced current density -0.11 mA/cm2 at 2.47 V/μm are achieved. The low threshold field and the high emission current density are attributed primarily to the unique shape and smaller resistivity of the ZnO nanosheet films.展开更多
We study the controlling of the Goos-Hanchen (GH) shifts in reflected and transmitted light beams in the triple coupled InGaAs/GaAs quantum dot (QD) nanostructures with electron tunneling and incoherent pumping fi...We study the controlling of the Goos-Hanchen (GH) shifts in reflected and transmitted light beams in the triple coupled InGaAs/GaAs quantum dot (QD) nanostructures with electron tunneling and incoherent pumping field. It is shown that the lateral shift can become either large negative or large positive, which can be controlled by the electron tunneling and the rate of incoherent pump field in different incident angles. It is also demonstrated that the properties of the OH shifts are strongly dependent on the probe absorption beam of the intracavity medium due to the switching from superluminal light propagation to subluminal behavior or vice versa. Our suggested system can be considered as a new theoretical method for developing a new nano-optoelectronic sensor.展开更多
A Monte Carlo simulation technique has been used to model the electron transport' behavior, especially the electron density and energy distributions under the influence of a mirror magnetic field and a uniform ele...A Monte Carlo simulation technique has been used to model the electron transport' behavior, especially the electron density and energy distributions under the influence of a mirror magnetic field and a uniform electric field in a positive column of helium direct current(DC) gas discharge Graphs showing the electron density and energy distributions, and the percentage of electrons that reach the wall and the end of the positive column are presented. The results indicate that the mirror magnetic field can control the electron transport behavior in the positive column which are in good agreement with experimental results.展开更多
In this study rectangular AlGaN/AlN/GaN heterostructure field-effect transistors(HFETs) with 22-nm and 12-nm AlGaN barrier layers are fabricated, respectively. Using the measured capacitance–voltage and current–volt...In this study rectangular AlGaN/AlN/GaN heterostructure field-effect transistors(HFETs) with 22-nm and 12-nm AlGaN barrier layers are fabricated, respectively. Using the measured capacitance–voltage and current–voltage characteristics of the prepared devices with different Schottky areas, it is found that after processing the device, the polarization Coulomb field(PCF) scattering is induced and has an important influence on the two-dimensional electron gas electron mobility.Moreover, the influence of PCF scattering on the electron mobility is enhanced by reducing the AlGaN barrier thickness.This leads to the quite different variation of the electron mobility with gate bias when compared with the AlGaN barrier thickness. This mainly happens because the thinner AlGaN barrier layer suffers from a much stronger electrical field when applying a gate bias, which gives rise to a stronger converse piezoelectric effect.展开更多
In this study, we evaluate the influence of post surface pre-treatments on the bond strength of four different cements to glass fiber posts. Eighty extracted human maxillary central incisors and canines were endodonti...In this study, we evaluate the influence of post surface pre-treatments on the bond strength of four different cements to glass fiber posts. Eighty extracted human maxillary central incisors and canines were endodontically treated and standardized post spaces were prepared. Four post pre-treatments were tested: (i) no pre-treatment (NS, control), (ii) sandblasting (SA), (iii) silanization (SI) and (iv) sandblasting followed by silanization (SS). Per pre-treatment, four dual-cure resin cements were used for luting posts: DMG LUXACORE Smartmix Dual, Multilink Automix, RelyX Unicem and Panavia F2.0. All the specimens were subjected to micro push-out test. Two-way analysis of variance and Tukey post hoc tests were performed (α=0.05) to analyze the data. Bond strength was significantly affected by the type of resin cement, and bond strengths of RelyX Unicem and Panavia F2.0 to the fiber posts were significantly higher than the other cement groups. Sandblasting significantly increased the bond strength of DMG group to the fiber posts.展开更多
In this paper, the dielectric properties of CO2, CO2/air, CO2/O2, CO2/N2, CO2/CF4, CO2/CH4, CO2/He, C02/H2, CO2/NH3 and CO2/CO were investigated based on the Boltzmann equation analysis, in which the reduced critical ...In this paper, the dielectric properties of CO2, CO2/air, CO2/O2, CO2/N2, CO2/CF4, CO2/CH4, CO2/He, C02/H2, CO2/NH3 and CO2/CO were investigated based on the Boltzmann equation analysis, in which the reduced critical electric field strength (E/N)cr of the gases was derived from the calculated electron energy distribution function (EEDF) by solv- ing the Boltzmann transport equation. In this work, it should be noted that the fundamental data were carefully selected by the published experimental results and calculations to ensure the validity of the calculation. The results indicate that if He, H2, N2 and CH4, in which there axe high ionization coefficients or a lack of attachment reactions, are added into CO2, the dielectric properties will decrease. On the other hand, air, O2, NH3 and CFa (ranked in terms of (E/N)cr value in increasing order) have the potential to improve the dielectric property of CO2 at room temperature.展开更多
Using first-principles calculations,including Grimme D2 method for van der Waals interactions,we investigate the tuning electronic properties of bilayer zirconium disulfides(ZrS_2/ subjected to vertical electric fiel...Using first-principles calculations,including Grimme D2 method for van der Waals interactions,we investigate the tuning electronic properties of bilayer zirconium disulfides(ZrS_2/ subjected to vertical electric field and normal compressive strain.The band gap of ZrS_2 bilayer can be flexibly tuned by vertical external electric field.Due to the Stark effect,at critical electric fields about 1.4 V/?,semiconducting-metallic transition presents.In addition,our results also demonstrated that the compressive strain has an important impact on the electronic properties of ZrS_2 bilayer sheet.The widely tunable band gaps confirm possibilities for its applications in electronics and optoelectronics.展开更多
Influence of the gassing materials, such as PA6, PMMA, and POM on the dielectric properties of air are investigated. In this work, the fundamental electron collision cross section data were carefully selected and vali...Influence of the gassing materials, such as PA6, PMMA, and POM on the dielectric properties of air are investigated. In this work, the fundamental electron collision cross section data were carefully selected and validated. Then the species compositions of the air–organic vapor mixtures were calculated based on the Gibbs free energy minimization. Finally, the Townsend ionization coefficient, the Townsend electron attachment coefficient and the critical reduced electric field strength were derived from the calculated electron energy distribution function by solving the Boltzmann transport equation. The calculation results indicated that H;O with large attachment cross sections has a great impact on the critical reduced electric field strength of the air–organic vapor mixtures. On the other hand, the vaporization of gassing materials can help to increase the dielectric properties of air circuit breakers to some degree.展开更多
A novel hybrid structure with high responsivity and efficiency is proposed based on an L-shaped frame nano-antenna(LSFNA)array for solar energy harvesting application.So,two types of LSFNAs are designed and optimized ...A novel hybrid structure with high responsivity and efficiency is proposed based on an L-shaped frame nano-antenna(LSFNA)array for solar energy harvesting application.So,two types of LSFNAs are designed and optimized to enhance the harvesting characteristics of traditional simple electric dipole nano-antenna(SEDNA).The LSFNA geometrical dimensions are optimized to have the best values for the required input impedance at three resonance wavelengths ofλ_(res)=10μm,15μm,and 20μm.Then the LSFNAs with three different sizes are modeled like a planar spiral-shaped array(PSSA).Also,a fractal bowtie nano-antenna is connected with the PSSA in the array gap.This proposed hybrid structure consists of two main elements:(I)Three different sizes of the LSFNAs with two different material types are designed based on the thin-film metal-insulator-metal diodes that are a proper method for infrared energy harvesting.(Ⅱ)The PSSA gap is designed based on the electron field emission proposed by the Fowler-Nordheim theory for the array rectification.Finally,the proposed device is analyzed.The results show that the PSSA not only has an averaged 3-time enhancement in the harvesting characteristics(such as return loss,harvesting efficiency,etc.)than the previously proposed structures but also is a multi-resonance wide-band device.Furthermore,the proposed antenna takes up less space in the electronic circuit and has an easy implementation process.展开更多
The Al/a-C nanocomposite thin films are synthesized on Si substrates using a dense plasma focus device with alu- minum fitted anode and operating with CH4/Ar admixture. X-ray diffractometer results confirm the formati...The Al/a-C nanocomposite thin films are synthesized on Si substrates using a dense plasma focus device with alu- minum fitted anode and operating with CH4/Ar admixture. X-ray diffractometer results confirm the formation of metallic crystalline Al phases using different numbers of focus shots. Raman analyses show the formation of D and G peaks for all thin film samples, confirming the presence of a-C in the nanocomposite thin films. The formation of Al/a-C nanocomposite thin films is further confirmed using X-ray photoelectron spectroscopy analysis. The scanning electron microscope results show that the deposited thin films consist of nanoparticles and their agglomerates. The sizes of th agglomerates increase with increasing numbers of focus deposition shots. The nanoindentation results show the variations in hardness and elastic modulus values of nanocomposite thin film with increasing the number of focus shots. Maximum values of hardness and elastic modulus of the composite thin film prepared using 20 focus shots are found to be about 10.7 GPa and 189.2 GPa, respectively.展开更多
The anisotropic transport property was investigated in a phase separation La(0.67)Ca(0.33)MnO3(LCMO) film grown on(001)-oriented Nd GaO3(NGO) substrate. It was found that the resistivity along the b-axis is ...The anisotropic transport property was investigated in a phase separation La(0.67)Ca(0.33)MnO3(LCMO) film grown on(001)-oriented Nd GaO3(NGO) substrate. It was found that the resistivity along the b-axis is much higher than that along the a-axis. Two resistivity peaks were observed in the temperature dependent measurement along the b-axis, one located at 91 K and the other centered at 165 K. Moreover, we also studied the response of the resistivities along the two axes to various electric currents, magnetic fields, and light illuminations. The resistivities along the two axes are sensitive to the magnetic field. However, the electric current and light illumination can influence the resistivity along the b-axis obviously, but have little effect on the resistivity along the a-axis. Based on these results, we believe that an anisotropicstrain-controlled MnO6 octahedra shear-mode deformation may provide a mechanism of conduction filaments paths along the a-axis, which leads to the anisotropic transport property.展开更多
文摘In this work, a Fe-based nanocrystalline microwire of 20 mm in length and 25 μm in diameter was placed in the center of a 316 stainless steel pipe. The pipe was 500 μm in diameter and a little shorter than the microwire. A series of voltages were applied on the pipe to study the influence of the electrical field on the Giant-Magneto-Impedance(GMI) effect of the microwire. Experimental results showed that the electronic field between the wire and the pipe reduced the hysteresis of the GMI effect. The results were explained based on equivalent circuit and eddy current consumptions analysis.
文摘Objective To test a quality assurance(QA)DVS solution-DVS based on a linac electronic field imaging device(EPID)and evaluate its accuracy and ease of use.Methods All of the QA items that do not require the dedicated QA phantom in the DVS solution were tested.Test methods were chosen based on the test items:for the collimator rotation center,the coincidence of the radiation and mechanical,mechanical flatness/symmetry and MLC transmission were compared with the existing QA solution;for the leaf position accuracy and repeatability,the original preset beam fields and fields adjusted by 1 mm were compared.Results The collimator rotation center by the DVS solution is similar to the existing solution.For coincidence of radiation and mechanical,the DVS solution provides more data,including 3D distance.For the flatness/symmetry property,the DVS solution can display more graphics,but the overall data is less than the ion-chamber matrix solution.The DVS solution can directly obtain the MLC transmission value and quickly and intuitively measure the position accuracy of the MLC.However,the repeatability is slightly worse.Conclusion The DVS solution can improve the QA work efficiency and reduce workload,and there are more opportunities for improvement.
文摘The novelty of this research lies in the successful fabrication of a 3D-printed honeycomb structure filled with nanofillers for acoustic properties,utilizing an impedance tube setup in accordance with ASTM standard E 1050-12.The Creality Ender-3,a 3D printer,was used for printing the honeycomb structures,and polylactic acid(PLA)material was employed for their construction.The organic,inorganic,and polymeric compounds within the composites were identified using fourier transformation infrared(FTIR)spectroscopy.The structure and homogeneity of the samples were examined using a field emission scanning electron microscope(FESEM).To determine the sound absorption coefficient of the 3D printed honeycomb structure,numerous samples were systematically developed using central composite design(CCD)and analysed using response surface methodology(RSM).The RSM mathematical model was established to predict the optimum values of each factor and noise reduction coefficient(NRC).The optimum values for an NRC of 0.377 were found to be 1.116 wt% carbon black,1.025 wt% aluminium powder,and 3.151 mm distance between parallel edges.Overall,the results demonstrate that a 3Dprinted honeycomb structure filled with nanofillers is an excellent material that can be utilized in various fields,including defence and aviation,where lightweight and acoustic properties are of great importance.
基金financially supported by The Program for New Century Excellent Talents in University (NCET)the National Natural Science Foundation of China (NSFC) under Grant No.50772041
文摘In this paper,we report the effect of nitrogen on the deposition and properties of boron doped diamond films synthesized by hot filament chemical vapor deposition.The diamond films consisting of micro-grains(nano-grains) were realized with low(high) boron source flow rate during the growth processes.The transition of micro-grains to nano-grains is speculated to be strongly(weekly) related with the boron(nitrogen) flow rate.The grain size and Raman spectral feature vary insignificantly as a function of the nitrogen introduction at a certain boron flow rate.The variation of electron field emission characteristics dependent on nitrogen is different between microcrystalline and nanocrystalline boron doped diamond samples,which are related to the combined phase composition,boron doping level and texture structure.There is an optimum nitrogen proportion to improve the field emission properties of the boron-doped films.
基金Supported by the National Natural Science Foundation of China under Grant No 11405114the Natural Science Foundation of Shanxi Province under Grant No 2015021065
文摘Cu ion implantation and subsequent rapid annealing at 500℃ in N2 result in low surface resistivity of 1.611 ohm/sq with high mobility of 290 cm2 V-1S-1 for microcrystalline diamond (MCD) films. Its electrical field emission behavior can be turned on at Eo = 2.6 V/μm, attaining a current density of 19.5μA/cm2 at an applied field of 3.5 V/#m. Field emission scanning electron microscopy combined with Raman and x-ray photoelectron mi- croscopy reveal that the formation of Cu nanoparticles in MCD films can catalytically convert the less conducting disorder/a-C phases into graphitic phases and can provoke the formation of nanographite in the films, forming conduction channels for electron transportation.
文摘SiCN thin films were synthesized by a radio frequency chemical vapor deposition (RFCVD) system on P\|type Si (1 0 0) wafers using C 2 H 4 , SiH 4 and N 2 as raw materials. In order to get rid of the oxygen absorbed on the surface and improve the characteristics of electron field emission, Ar + ions of low energy were used to bombard the samples. The field emission characteristics of SiCN thin films before and after Ar + bombardment were studied in the super vacuum environment of 10 -6 Pa. It was showed that the turn\|on field (defined as the point where the current\|voltage curve shows a sharp increase in the current density) decreased from 38 V/μm before bombardment to 25 V/μm after bombardment. And the maximum emission current density increased from 159.2 to 267.4 μA/cm 2 . The composition before and after Ar + bombardment was compared using X\|ray photoelectron spectroscopy (XPS). Our results illustrated that the field emission characteristics were improved after the bombardment of Ar + .
基金Supported by the National Natural Science Foundation of China under Grant Nos 11425414 and 11504215the Scientific Research Training Program of Shanxi University
文摘The important features of the rescattering trajectories in strong field ionization process such as the cutoff of the return energy at 3.17Up and that of the final energy at 10Up are obtained, based on the adiabatic approximation in which the initial momentum of the electron is assumed to be zero. We theoretically study the nonadiabatic effect by assuming a nonzero initial momentum on the rescattering trajectories based on the semiclassical simpleman model. We show that the nonzero initial momentum will modify both the maximal return energy at collision and the final energy after backward scattering, but in different ways for odd and even number of return trajectories. The energies are increased for even number of returns but are decreased for odd number of returns when the nonzero (positive or negative) initial momentum is applied.
基金supported by the National Natural Science Foundation of China(6110118561302145)
文摘Digital image stabilization technique plays important roles in video surveillance and object acquisition.Many useful electronic image stabilization algorithms have been studied.A real-time algorithm is proposed based on field image gray projection which enables the regional odd and even field image to be projected into x and y directions and thus to get the regional gray projection curves in x and y directions,respectively.For the odd field image channel,motion parameters can be estimated via iterative minimum absolute difference based on two successive field image regional gray projection curves.Then motion compensations can be obtained after using the Kalman filter method.Finally,the odd field image is adjusted according to the compensations.In the mean time,motion compensation is applied to the even field image channel with the odd field image gray projection curves of the current frame.By minimizing absolute difference between odd and even field image gray projection curves of the current frame,the inter-field motion parameters can be estimated.Therefore,the even field image can be adjusted by combining the inter-field motion parameters and the odd field compensations.Finally,the stabilized image sequence can be obtained by synthesizing the adjusted odd and even field images.Experimental results show that the proposed algorithm can run in real-time and have a good stabilization performance.In addition,image blurring can be improved.
基金supported by the National Natural Science Foundation of China(Grant Nos.11305263 and 61401484)
文摘The carbon nanotube (CNT)-based materials can be used as vacuum device cathodes. Owing to the excellent field emission properties of CNT, it has great potentials in the applications of an explosive field emission cathode. The falling off of CNT from the substrate, which frequently appears in experiments, restricts its application. In addition, the onset time of vacuum breakdown limits the performance of the high-power explosive-emission-cathode-based diode. In this paper, the characteristics of the CNT, electric field strength, contact resistance and the kind of substrate material are varied to study the parameter effects on the onset time of vacuum breakdown and failure mechanism of the CNT by using the finite element method.
基金supported by the Science Foundation of Shanghai Human Resources and Social Security Bureau, China (Grant No. 2009023)
文摘ZnO films with special textures ave fabricated on Mo-coated Al2O3 ceramic substrates by the catalyst-free electron beam evaporation method, and the as-deposited films are treated by hydrogen plasma. It is found that the surface morphologies of the films are changed significantly after hydrogen plasma treatment and that the films consist of vertically standing and intersecting nanosheets. A lower turn-on field of 1.2 V/μm and an enhanced current density -0.11 mA/cm2 at 2.47 V/μm are achieved. The low threshold field and the high emission current density are attributed primarily to the unique shape and smaller resistivity of the ZnO nanosheet films.
文摘We study the controlling of the Goos-Hanchen (GH) shifts in reflected and transmitted light beams in the triple coupled InGaAs/GaAs quantum dot (QD) nanostructures with electron tunneling and incoherent pumping field. It is shown that the lateral shift can become either large negative or large positive, which can be controlled by the electron tunneling and the rate of incoherent pump field in different incident angles. It is also demonstrated that the properties of the OH shifts are strongly dependent on the probe absorption beam of the intracavity medium due to the switching from superluminal light propagation to subluminal behavior or vice versa. Our suggested system can be considered as a new theoretical method for developing a new nano-optoelectronic sensor.
文摘A Monte Carlo simulation technique has been used to model the electron transport' behavior, especially the electron density and energy distributions under the influence of a mirror magnetic field and a uniform electric field in a positive column of helium direct current(DC) gas discharge Graphs showing the electron density and energy distributions, and the percentage of electrons that reach the wall and the end of the positive column are presented. The results indicate that the mirror magnetic field can control the electron transport behavior in the positive column which are in good agreement with experimental results.
基金supported by the National Natural Science Foundation of China(Grant Nos.61306113 and11174182)
文摘In this study rectangular AlGaN/AlN/GaN heterostructure field-effect transistors(HFETs) with 22-nm and 12-nm AlGaN barrier layers are fabricated, respectively. Using the measured capacitance–voltage and current–voltage characteristics of the prepared devices with different Schottky areas, it is found that after processing the device, the polarization Coulomb field(PCF) scattering is induced and has an important influence on the two-dimensional electron gas electron mobility.Moreover, the influence of PCF scattering on the electron mobility is enhanced by reducing the AlGaN barrier thickness.This leads to the quite different variation of the electron mobility with gate bias when compared with the AlGaN barrier thickness. This mainly happens because the thinner AlGaN barrier layer suffers from a much stronger electrical field when applying a gate bias, which gives rise to a stronger converse piezoelectric effect.
基金provided financial assistance by Jilin Province Health Department (2010z016)
文摘In this study, we evaluate the influence of post surface pre-treatments on the bond strength of four different cements to glass fiber posts. Eighty extracted human maxillary central incisors and canines were endodontically treated and standardized post spaces were prepared. Four post pre-treatments were tested: (i) no pre-treatment (NS, control), (ii) sandblasting (SA), (iii) silanization (SI) and (iv) sandblasting followed by silanization (SS). Per pre-treatment, four dual-cure resin cements were used for luting posts: DMG LUXACORE Smartmix Dual, Multilink Automix, RelyX Unicem and Panavia F2.0. All the specimens were subjected to micro push-out test. Two-way analysis of variance and Tukey post hoc tests were performed (α=0.05) to analyze the data. Bond strength was significantly affected by the type of resin cement, and bond strengths of RelyX Unicem and Panavia F2.0 to the fiber posts were significantly higher than the other cement groups. Sandblasting significantly increased the bond strength of DMG group to the fiber posts.
基金supported in part by the National Key Basic Research Program of China(973 Program)(No.2015CB251002)the Science and Technology Project Funds of the Grid State Corporation of China(No.SGSNK00KJJS1501564)+2 种基金National Natural Science Foundation of China(Nos.51221005,51577145)the Fundamental Research Funds for the Central Universities of Chinathe Program for New Century Excellent Talents in University,China
文摘In this paper, the dielectric properties of CO2, CO2/air, CO2/O2, CO2/N2, CO2/CF4, CO2/CH4, CO2/He, C02/H2, CO2/NH3 and CO2/CO were investigated based on the Boltzmann equation analysis, in which the reduced critical electric field strength (E/N)cr of the gases was derived from the calculated electron energy distribution function (EEDF) by solv- ing the Boltzmann transport equation. In this work, it should be noted that the fundamental data were carefully selected by the published experimental results and calculations to ensure the validity of the calculation. The results indicate that if He, H2, N2 and CH4, in which there axe high ionization coefficients or a lack of attachment reactions, are added into CO2, the dielectric properties will decrease. On the other hand, air, O2, NH3 and CFa (ranked in terms of (E/N)cr value in increasing order) have the potential to improve the dielectric property of CO2 at room temperature.
基金Project support by the CAS/SAFEA International Partnership Program for Creative Research Teams and the Basic and Frontier Technology Research of Henan(No.142300410244)
文摘Using first-principles calculations,including Grimme D2 method for van der Waals interactions,we investigate the tuning electronic properties of bilayer zirconium disulfides(ZrS_2/ subjected to vertical electric field and normal compressive strain.The band gap of ZrS_2 bilayer can be flexibly tuned by vertical external electric field.Due to the Stark effect,at critical electric fields about 1.4 V/?,semiconducting-metallic transition presents.In addition,our results also demonstrated that the compressive strain has an important impact on the electronic properties of ZrS_2 bilayer sheet.The widely tunable band gaps confirm possibilities for its applications in electronics and optoelectronics.
基金supported by the National Key Basic Research Program of China(973 Program)2015CB251002National Natural Science Foundation of China under Grant 51521065,51577145+1 种基金the Fundamental Research Funds for the Central UniversitiesShaanxi Province Natural Science Foundation 2013JM-7010
文摘Influence of the gassing materials, such as PA6, PMMA, and POM on the dielectric properties of air are investigated. In this work, the fundamental electron collision cross section data were carefully selected and validated. Then the species compositions of the air–organic vapor mixtures were calculated based on the Gibbs free energy minimization. Finally, the Townsend ionization coefficient, the Townsend electron attachment coefficient and the critical reduced electric field strength were derived from the calculated electron energy distribution function by solving the Boltzmann transport equation. The calculation results indicated that H;O with large attachment cross sections has a great impact on the critical reduced electric field strength of the air–organic vapor mixtures. On the other hand, the vaporization of gassing materials can help to increase the dielectric properties of air circuit breakers to some degree.
文摘A novel hybrid structure with high responsivity and efficiency is proposed based on an L-shaped frame nano-antenna(LSFNA)array for solar energy harvesting application.So,two types of LSFNAs are designed and optimized to enhance the harvesting characteristics of traditional simple electric dipole nano-antenna(SEDNA).The LSFNA geometrical dimensions are optimized to have the best values for the required input impedance at three resonance wavelengths ofλ_(res)=10μm,15μm,and 20μm.Then the LSFNAs with three different sizes are modeled like a planar spiral-shaped array(PSSA).Also,a fractal bowtie nano-antenna is connected with the PSSA in the array gap.This proposed hybrid structure consists of two main elements:(I)Three different sizes of the LSFNAs with two different material types are designed based on the thin-film metal-insulator-metal diodes that are a proper method for infrared energy harvesting.(Ⅱ)The PSSA gap is designed based on the electron field emission proposed by the Fowler-Nordheim theory for the array rectification.Finally,the proposed device is analyzed.The results show that the PSSA not only has an averaged 3-time enhancement in the harvesting characteristics(such as return loss,harvesting efficiency,etc.)than the previously proposed structures but also is a multi-resonance wide-band device.Furthermore,the proposed antenna takes up less space in the electronic circuit and has an easy implementation process.
文摘The Al/a-C nanocomposite thin films are synthesized on Si substrates using a dense plasma focus device with alu- minum fitted anode and operating with CH4/Ar admixture. X-ray diffractometer results confirm the formation of metallic crystalline Al phases using different numbers of focus shots. Raman analyses show the formation of D and G peaks for all thin film samples, confirming the presence of a-C in the nanocomposite thin films. The formation of Al/a-C nanocomposite thin films is further confirmed using X-ray photoelectron spectroscopy analysis. The scanning electron microscope results show that the deposited thin films consist of nanoparticles and their agglomerates. The sizes of th agglomerates increase with increasing numbers of focus deposition shots. The nanoindentation results show the variations in hardness and elastic modulus values of nanocomposite thin film with increasing the number of focus shots. Maximum values of hardness and elastic modulus of the composite thin film prepared using 20 focus shots are found to be about 10.7 GPa and 189.2 GPa, respectively.
基金Project supported by the National Basic Research Program of China(Grant Nos.2011CB921801,2012CB921403,and 2013CB921701)the National Natural Science Foundation of China(Grant Nos.11074285,51372064,and 11134007)
文摘The anisotropic transport property was investigated in a phase separation La(0.67)Ca(0.33)MnO3(LCMO) film grown on(001)-oriented Nd GaO3(NGO) substrate. It was found that the resistivity along the b-axis is much higher than that along the a-axis. Two resistivity peaks were observed in the temperature dependent measurement along the b-axis, one located at 91 K and the other centered at 165 K. Moreover, we also studied the response of the resistivities along the two axes to various electric currents, magnetic fields, and light illuminations. The resistivities along the two axes are sensitive to the magnetic field. However, the electric current and light illumination can influence the resistivity along the b-axis obviously, but have little effect on the resistivity along the a-axis. Based on these results, we believe that an anisotropicstrain-controlled MnO6 octahedra shear-mode deformation may provide a mechanism of conduction filaments paths along the a-axis, which leads to the anisotropic transport property.