This study describes the dynamic behaviour of droplets of biological liquids on hydrophobic surfaces under electrostatic actuation, to devise sample handling in lab-on-chip diagnostic tools. Bovine Serum Albumin (BSA...This study describes the dynamic behaviour of droplets of biological liquids on hydrophobic surfaces under electrostatic actuation, to devise sample handling in lab-on-chip diagnostic tools. Bovine Serum Albumin (BSA) is taken as a representative biomolecule, since it is often used in adsorption studies. Green Fluorescence Protein (GFP) is also considered, given its natural fluorescence. Several effects such as sample concentration and pH are discussed. The results show negligible effects of proteins concentration in electrowetting, although increased concentrations endorse passive adsorption mechanisms, which alter the local wettability of the substrates precluding droplet motion. Bioinspired surfaces promote the largest spreading diameter, which is beneficial for droplet motion. However, surface roughness promotes energy dissipation limiting the receding droplet motion. Hence, the most effective approach is altering the surface chemistry. The coating is applied to a surface with a mean roughness smaller than 20 nm and does not alter significantly the topography, thus leading to the so-called smooth superhydrophobic surface. This coating also reduces passive proteins adsorption, as confirmed by Confocal Microscopy (CM), which is beneficial for droplet motion. Evaluating absorption spectra of protein solutions evidences an increase in protein concentration ascribed to droplet evaporation as confirmed by theoretical analysis and time resolved infrared visualization.展开更多
In micro-electrochemical machining(μECM), material dissolution takes place at very close vicinity of tool electrode due to localization of electric field. Controlling the gap between tool electrode and workpiece is t...In micro-electrochemical machining(μECM), material dissolution takes place at very close vicinity of tool electrode due to localization of electric field. Controlling the gap between tool electrode and workpiece is the key to μECM. Therefore, a new method is proposed to solve a variety of problems in small gap control. In the present context, experiments were carried out with an indigenously developed setup to fabricate cylindrical arrays. During the machining process, the flat electrode bends due to electrostatic force in pulse on-time, which self-adaptively narrows the gap between the electrode and the workpiece. The workpiece material will be removed once the gap meets the processing condition. Therefore, this method has advantages of reducing dependence on high precision machine tools and of avoiding complex servo control. The flat electrode quickly restores to its original condition when it is in pulse off-time, making the gap much larger than that in traditional electrochemical machining(ECM). The large gap benefits debris removing, which improves the machining accuracy. The influence of different experimental parameters on accuracy and efficiency during the machining process has been investigated. It is observed that with the increase in applied voltage or concentration of electrolyte, the material removal rate and the process gap both increase. The detailed analysis of the experimental results is described in this paper.展开更多
In this paper, the effect of van der Waals (vdW) force on the pull-in behavior of electrostatically actuated nano/micromirrors is investigated. First, the minimum po- tential energy principle is utilized to find the...In this paper, the effect of van der Waals (vdW) force on the pull-in behavior of electrostatically actuated nano/micromirrors is investigated. First, the minimum po- tential energy principle is utilized to find the equation gov- erning the static behavior of nano/micromirror under electro- static and vdW forces. Then, the stability of static equilib- rium points is analyzed using the energy method. It is found that when there exist two equilibrium points, the smaller one is stable and the larger one is unstable. The effects of dif- ferent design parameters on the mirror's pull-in angle and pull-in voltage are studied and it is found that vdW force can considerably reduce the stability limit of the mirror. At the end, the nonlinear equilibrium equation is solved numer- ically and analytically using homotopy perturbation method (HPM). It is observed that a sixth order perturbation approx- imation can precisely model the mirror's behavior. The re- suits of this paper can be used for stable operation design and safe fabrication of torsional nano/micro actuators.展开更多
We present a new analytical model for electrostatically actuated microbeams to explore the size effect by using the modified couple stress theory and the minimum total potential energy principle. A material length sca...We present a new analytical model for electrostatically actuated microbeams to explore the size effect by using the modified couple stress theory and the minimum total potential energy principle. A material length scale parameter is introduced to represent the size-dependent characteristics of microbeams. This model also accounts for the nonlinearities associated with the mid-plane stretching force and the electrostatical force. Numerical analysis for microbeams with clamped-clamped and cantilevered conditions has been performed. It is found that the intensity of size effect is closely associated with the thickness of the microbeam,and smaller beam thickness displays stronger size effect and hence yields smaller deffection and larger pull-in voltage. When the beam thickness is comparable to the material length scale parameter,the size effect is significant and the present theoretical model including the material length scale parameter is adequate for predicting the static behavior of microbeam-based MEMS.展开更多
A delayed position feedback control is applied on DC of a typical MEMS resonator actuated by electrostatic forces voltage source for suppressing chaos A theoretical necessary condition for chaotic oscillation of the c...A delayed position feedback control is applied on DC of a typical MEMS resonator actuated by electrostatic forces voltage source for suppressing chaos A theoretical necessary condition for chaotic oscillation of the controlled system is presented. Numerical results and the analytical prediction reveal the evolution of dynamical behavior of the system with AC voltage amplitude and the control effect of delayed feedback on reducing chaos of the system. It shows that the delayed feedback control is effective on suppressing chaos of the micro mechanical resonator.展开更多
The paper presents the size-dependant behaviors of the carbon nanotubes under electrostatic actuation using the modified couple stress theory and homotopy perturbation method.Due to the less accuracy of the classical ...The paper presents the size-dependant behaviors of the carbon nanotubes under electrostatic actuation using the modified couple stress theory and homotopy perturbation method.Due to the less accuracy of the classical elasticity theorems,the modified couple stress theory is applied in order to capture the size-dependant properties of the carbon nanotubes.Both of the static and dynamic behaviors under static DC and step DC voltages are discussed.The effects of various dimensions and boundary conditions on the deflection and pull-in voltages of the carbon nanotubes are to be investigated in detail via application of the homotopy perturbation method to solve the nonlinear governing equations semi-analytically.展开更多
A micromechanical optical switch driven by electrostatic was fabricated with (100) silicon and tilted 2.5° (111) silicon. The pull-in voltage is 13.2V, the insertion loss is less than 1.4dB, the crosstalk is less...A micromechanical optical switch driven by electrostatic was fabricated with (100) silicon and tilted 2.5° (111) silicon. The pull-in voltage is 13.2V, the insertion loss is less than 1.4dB, the crosstalk is less than -50 dB.展开更多
文摘This study describes the dynamic behaviour of droplets of biological liquids on hydrophobic surfaces under electrostatic actuation, to devise sample handling in lab-on-chip diagnostic tools. Bovine Serum Albumin (BSA) is taken as a representative biomolecule, since it is often used in adsorption studies. Green Fluorescence Protein (GFP) is also considered, given its natural fluorescence. Several effects such as sample concentration and pH are discussed. The results show negligible effects of proteins concentration in electrowetting, although increased concentrations endorse passive adsorption mechanisms, which alter the local wettability of the substrates precluding droplet motion. Bioinspired surfaces promote the largest spreading diameter, which is beneficial for droplet motion. However, surface roughness promotes energy dissipation limiting the receding droplet motion. Hence, the most effective approach is altering the surface chemistry. The coating is applied to a surface with a mean roughness smaller than 20 nm and does not alter significantly the topography, thus leading to the so-called smooth superhydrophobic surface. This coating also reduces passive proteins adsorption, as confirmed by Confocal Microscopy (CM), which is beneficial for droplet motion. Evaluating absorption spectra of protein solutions evidences an increase in protein concentration ascribed to droplet evaporation as confirmed by theoretical analysis and time resolved infrared visualization.
基金supported by the National Natural Science Foundation of China(Grant No.51105110,51475107)Shenzhen Basic Research Program(Grant No.JCYJ20170811160440239)
文摘In micro-electrochemical machining(μECM), material dissolution takes place at very close vicinity of tool electrode due to localization of electric field. Controlling the gap between tool electrode and workpiece is the key to μECM. Therefore, a new method is proposed to solve a variety of problems in small gap control. In the present context, experiments were carried out with an indigenously developed setup to fabricate cylindrical arrays. During the machining process, the flat electrode bends due to electrostatic force in pulse on-time, which self-adaptively narrows the gap between the electrode and the workpiece. The workpiece material will be removed once the gap meets the processing condition. Therefore, this method has advantages of reducing dependence on high precision machine tools and of avoiding complex servo control. The flat electrode quickly restores to its original condition when it is in pulse off-time, making the gap much larger than that in traditional electrochemical machining(ECM). The large gap benefits debris removing, which improves the machining accuracy. The influence of different experimental parameters on accuracy and efficiency during the machining process has been investigated. It is observed that with the increase in applied voltage or concentration of electrolyte, the material removal rate and the process gap both increase. The detailed analysis of the experimental results is described in this paper.
文摘In this paper, the effect of van der Waals (vdW) force on the pull-in behavior of electrostatically actuated nano/micromirrors is investigated. First, the minimum po- tential energy principle is utilized to find the equation gov- erning the static behavior of nano/micromirror under electro- static and vdW forces. Then, the stability of static equilib- rium points is analyzed using the energy method. It is found that when there exist two equilibrium points, the smaller one is stable and the larger one is unstable. The effects of dif- ferent design parameters on the mirror's pull-in angle and pull-in voltage are studied and it is found that vdW force can considerably reduce the stability limit of the mirror. At the end, the nonlinear equilibrium equation is solved numer- ically and analytically using homotopy perturbation method (HPM). It is observed that a sixth order perturbation approx- imation can precisely model the mirror's behavior. The re- suits of this paper can be used for stable operation design and safe fabrication of torsional nano/micro actuators.
文摘We present a new analytical model for electrostatically actuated microbeams to explore the size effect by using the modified couple stress theory and the minimum total potential energy principle. A material length scale parameter is introduced to represent the size-dependent characteristics of microbeams. This model also accounts for the nonlinearities associated with the mid-plane stretching force and the electrostatical force. Numerical analysis for microbeams with clamped-clamped and cantilevered conditions has been performed. It is found that the intensity of size effect is closely associated with the thickness of the microbeam,and smaller beam thickness displays stronger size effect and hence yields smaller deffection and larger pull-in voltage. When the beam thickness is comparable to the material length scale parameter,the size effect is significant and the present theoretical model including the material length scale parameter is adequate for predicting the static behavior of microbeam-based MEMS.
基金supported by the National Natural Science Foundation of China(10902071)"Chen Guang" Project of Shanghai Municipal Education Commission(11CG61)+1 种基金Leading Academic Discipline Project of Shanghai Institute of Technology(1020Q121001)Shanghai Leading Academic Discipline Project(J51501)
文摘A delayed position feedback control is applied on DC of a typical MEMS resonator actuated by electrostatic forces voltage source for suppressing chaos A theoretical necessary condition for chaotic oscillation of the controlled system is presented. Numerical results and the analytical prediction reveal the evolution of dynamical behavior of the system with AC voltage amplitude and the control effect of delayed feedback on reducing chaos of the system. It shows that the delayed feedback control is effective on suppressing chaos of the micro mechanical resonator.
文摘The paper presents the size-dependant behaviors of the carbon nanotubes under electrostatic actuation using the modified couple stress theory and homotopy perturbation method.Due to the less accuracy of the classical elasticity theorems,the modified couple stress theory is applied in order to capture the size-dependant properties of the carbon nanotubes.Both of the static and dynamic behaviors under static DC and step DC voltages are discussed.The effects of various dimensions and boundary conditions on the deflection and pull-in voltages of the carbon nanotubes are to be investigated in detail via application of the homotopy perturbation method to solve the nonlinear governing equations semi-analytically.
文摘A micromechanical optical switch driven by electrostatic was fabricated with (100) silicon and tilted 2.5° (111) silicon. The pull-in voltage is 13.2V, the insertion loss is less than 1.4dB, the crosstalk is less than -50 dB.