Effects of Different Parameters of Electrostatic Field on Removal of Ethylene in Fruit and Vegetable Storage Environment

[Objectives]The effects of different parameters of electrostatic field on the removal of ethylene from fruit and vegetable storage environment were studied. [Methods]The high voltage electrostatic field technology was used to simulate the removal of ethylene from fruit and vegetable storages, and its influencing factors were tested and analyzed. [Results] The removal effect of needle-plate electrodes was better than that of needle electrodes. The removal effect of ethylene at high voltage was better than that at low voltage. The length of gas chamber was positively correlated with the time required for ethylene removal. Increasing the voltage could produce more ozone, thus improving the removal effect of ethylene. [Conclusions] This study provides theoretical basis and technical support for the use of high-voltage electrostatic field to remove ethylene in controlled atmosphere storages.

Effect of High Voltage Electrostatic Fields on Post-Harvest Quality of Strawberry Fruit

The paper studied the effect of high-voltage electrostatic fields on the postharvest quality of strawberries. The results showed that the respiration rate decreased significantly, the content of soluble solids kept at high level, and the activities of polygalacturonase and cx-cellulase decreased, while the fruit firmness declined slowly. On the seventh day of storage, the rotten rate of strawberries treated by HVEF was 5%, the control group was 15%.

Electrostatic Field Enhanced Photocatalytic CO_(2) Conversion on BiVO_(4) Nanowires

The recombination loss of photo-carriers in photocatalytic systems fatally determines the energy conversion efficiency of photocatalysts.In this work,an electrostatic field was used to inhibit the recombination of photo-carriers in photocatalysts by separating photo-holes and photo-electrons in space.As a model structure,(010)facet-exposed BiVO_(4)nanowires were grown on PDMS-insulated piezo-substrate of piezoelectric transducer(PZT).The PZT substrate will generate an electrostatic field under a certain stress,and the photocatalytic behavior of BiVO_(4) nanowires is influenced by the electrostatic field.Our results showed that the photocatalytic performance of the BiVO_(4) nanowires in CO_(2)reduction in the negative electrostatic field is enhanced to 5.5-fold of that without electrostatic field.Moreover,the concentration of methane in the products was raised from 29% to 64%.The enhanced CO_(2) reduction efficiency is mainly attributed to the inhibited recombination loss of photo-carriers in the BiVO_(4) nanowires.The increased energy of photo-carriers and the enhanced surface absorption to polar molecules,which are CO in this case,were also play important roles in improving the photocatalytic activity of the photocatalyst and product selectivity.This work proposed an effective strategy to improve photo-carriers separation/transfer dynamics in the photocatalytic systems,which will also be a favorable reference for photovoltaic and photodetecting devices.

High-stability electrostatic field micro sensor for sounding thunderstorm applications

In this paper,the design and experimental results for a novel high-stability sounding electrostatic field micro sensor are presented.By means of hermetic chip sealing,digital weak signal demodulation unit,and probe sensor structure design,harsh environmental adaptation problems such as low temperature,high humidity,low air pressure,waterfall are solved.The sensor has a high resolution of 14 V/m,a wide measurement range of±100 kV/m,and is proved to have superior stability and performance in sounding electric field experiments than traditional sensors under different kinds of weather.

Orientation of KRb molecules in a switched electrostatic field

We theoretically investigate the orientation of the cold KRb molecules induced in a switched electrostatic field by numerically solving the full time-dependent Schr6dinger equation. The results show that the periodic field-free molecular orientation can be realized for the KRb molecules by rapidly switching off the electrostatic field. Meanwhile, by varying the switching times of the electrostatic field, the adiabatic and nonadiabatic interactions of the molecules with the applied field can be realized. Moreover, the influences of the electrostatic field strength and the rotational temperature to the degree of the molecular orientation are studied. The investigations show that increasing the electrostatic field will increase the degree of the molecular orientation, both in the constant-field regime and in the field-free regime, while the increasing of the rotational temperature of the cold molecules will greatly decrease the degree of the molecular orientation.

Body area communication based on quasi-electrostatic field and spread spectrum

Based on the electrical model of body area communication, the change tendency of chan nel gain in 100 kHz 10 MHz band was experimentally analyzed and verified. Results show that chan nel gain was flat and signal attenuation was approximately 43 dB in 1 MHz 10 MHz band. The char acteristics of the channel were taken into account in the design of body area spread spectrum com munication and its multiuser receiver issue. BER Eb/No curves of single user and multiuser were de rived by simulation. The characteristics of body area commutation channel were studied and the fea sibility of introducing spread spectrum theory to body area communication was verified.

The Phase Transition of Syndiotactic Polystyrene Induced by Electrostatic Field

The crystal structure and morphology of syndiotactic polystyrene (sPS) melt crystallized in various electrostatic fields have been investigated by using wide angle X ray diffraction (WAXD), differential scanning calorimeter (DSC) and scanning electron microscope (SEM). WAXD and DSC analyses show that sPS is gradually transformed from α phase to β phase with increase of electrostatic intensity. The SEM observations indicate that the morphology of sPS micro crystals is strongly dependent on electrostatic intensity applied to the sample during solidification. The variation of the micro crystals orientation from disordered lamellae to ordered lamellare have been observed with increase of electrostatic intensity.

Calculation of the Duration of the Atomic Tunneling Ionization in a Strong Electrostatic Field by Using Bohmian Trajectories Approach

The duration of a bound electron tunneling through the barrier formed by atomic potential and electrostatic field is calculated by the Bohmian trajectories scheme. The time of the tunneling ionization decreases with the increase of the amplitude of the electrostatic field. By using the information about the position, velocity and force of the Bohmian trajectories, the dynamical process of tunneling through the barrier is investigated.

A Unified Definition of Electrostatic and Magnetic Fields

This article originates from the observation that field lines are drawn using distinctive rules in magnetic field and electrostatic fields. It aims at reconciliating the definitions of these fields and thus reaching a consensus on the interpretation of field lines. Our unified field definition combines three orthogonal vectors and a unique scalar value. Field lines are then defined as isovalue lines of the scalar value, rendering it simpler to interpret in both field types. Specific to our field definition is the use of square root of vector’s cross product so that all vectors have the same physical unit. This enhanced field definition also enables a more efficient calculation of Biot-Savart law. This article is the first of a series allowing the drawing of isovalue contour lines.

A new electric field mill array with each of the mill’s rotor controlled precisely by a GPS module:Equipment and initial results

We have newly designed an electrostatic sensor,called an electric field mill(EFM),to simplify the estimation of the charge position and charge amount transferred by lightning discharges.It is necessary for this remote estimation of the transferred charge to measure electric field changes caused by charge loss at the time of a lightning strike at multiple locations.For multiple-station measurement of electric field changes,not only speed but also phase for exposure and shielding of the sensing plates inside each EFM of the array should be synchronized to maintain the sensitivities of the deployed instruments.Currently,there is no such EFM with specified speed and phase control performance of the rotary part.Thus,we developed a new EFM in which the rotary mechanism was controlled consistently to within 3%error by a GPS module.Five EFMs had been distributed in the Hokuriku area of Japan during the winter season of 2022-2023 for a test observation.Here we describe the design and a simple calibration method for our new EFM array.Data analysis method based on the assumption of a simple monopole charge structure is also summarized.For validation,locations of assumed point charges were compared with three-dimensional lightning mapping data estimated by radio observations in the MF-HF bands.Initial results indicated the validity to estimate transferred charge amounts and positions of winter cloud-to-ground lightning discharges with our new EFM array.

A novel SOI MOSFET electrostatic field sensor

A novel low temperature solid state electric field sensor is demonstrated as a promising sensor. The sensor is a type of constant voltage Wheatstone bridge whose resistors are four direct gate SOl MOSFET devices. It is demonstrated in theory that the output voltage signal is proportional to the electric field E, the temperature drift is about zero when the temperature is in the range from 200 to 400 K, and the doping concentration is in the range from 1 × 10^14 to 1 × 10^16 cm^-3. The experiment results indicate that the resolution of the sensor is about 3.27 mV for a 1000 V/m electric field at 300 K, and the voltage drift by an amount is about 47 V/m field signal when the degree temperature is in the range from 300 to 370 K, which is much smaller than the current drift of a single MOSFET which is about 10000 V/m field signal.

Electrostatic Modes of Dusty Plasmas in a Uniform Magnetic Field

Electrostatic dusty plasma waves in a uniform magnetic field are studied. Unless the magnetic field is extremely strong, the dust particles can hardly be magnetized, while however, electrons and ions are easily done so. Electrostatic modes in such dusty plasmas can then be investigated by making use of the 'moderately magnetized' assumption of magnetized electrons and ions, and unmagnetized dust particles. In a high frequency range, due to the existence of dust component, both frequencies of Lang- muir waves (parallel to the magnetic field) and upper hybrid waves (perpendicular to the field) are reduced. In the frequency range of ion waves, besides the effect on dust-ion-acoustic waves propagating parallel to the magnetic field, the frequency of ion cyclotron waves perpendicular to the magnetic field is also enhanced. In a very low dust frequency range, we find an 'ion-cyclotron- dust-acoustic' mode propagating across the field line with a frequency even slower than dust acoustic waves.

CALCULATION AND EXPERIMENTAL INVESTIGATION OF ELECTRIC FIELDS INDUCED BY ELECTRODES IN ELECTROSTATIC CHARGED POWDER SPRAYING TECHNIQUE

Electric fields induced by ring and pin electrodes in electrostatic charged powder sprayingtechnique are analysed. The fundamental formulae to deseribe these fields have been built up. Theseformulae could be used to design electrostatic charged podwer spraying system. The chargingeffectiveness of ring and pin electrode is experimentally investigated and compared each other. Theperformance of ring electrode is better than that of pin electrode.

Effect of thermal diffusion and electrostatic force on evolution of wind-blown sand flow

A theoretical model is suggested to mathematically describe the effect of thermal diffusion from a sand-bed on evolution of a wind-blown sand flow. An upward wind field is engendered by the thermal diffusion and the coupling interaction among the horizontal and upward wind flow, saltating grains, and a kind of electrostatic force exerted on the grains are considered in this theoretical model. The numerical results show that the effect of the thermal diffusion on the evolution process of wind-blown groan flow is quite obvious and very similar to the effect of the electrostatic force on the evolution. Not only the time for the entire system to reach a steady state （called the duration time）, the transport rate of grains, the mass-flux profiles and the trajectory of saltating grains are affected by the thermal diffusion and the electrostatic force exerted on saltating grains, but also the wind profiles and the temperature profiles at the steady state are affected by the wind-blown sand flow.

Electrostatic surface guiding of cold polar molecules with a single charged wire

This paper proposes a scheme to guide cold polar molecules by using a single charged wire half embanked in an insulating substrate and a homogeneous bias electric field, which is generated by a plate capacitor composed of two infinite parallel metal plates. The spatial distributions of the electrostatic field produced by the combination of the charged wire and the plate capacitor and the corresponding Stark potentials （including dipole forces） for metastable CO molecules are calculated, the relationships between the electric field and the parameters of our charged-wire layout are analysed. It also studies the influences of the insulator on the electric field distribution and the discharge effect. This study shows that the proposed scheme can be used to guide cold polar molecules in the weak-field - seeking states, and to form various molecule-optical elements, such as molecular funnel, molecular beam-splitters and molecule interferometer, even to construct a variety of integrated molecule-optical elements and their molecule chips.

Toward high-efficiency perovskite solar cells with one-dimensional oriented nanostructured electron transport materials

The unique advantages of one-dimensional(1D)oriented nanostructures in light-trapping and chargetransport make them competitive candidates in photovoltaic(PV)devices.Since the emergence of perovskite solar cells(PSCs),1D nanostructured electron transport materials(ETMs)have drawn tremendous interest.However,the power conversion efficiencies(PCEs)of these devices have always significantly lagged behind their mesoscopic and planar counterparts.High-efficiency PSCs with 1D ETMs showing efficiency over 22%were just realized in the most recent studies.It yet lacks a comprehensive review covering the development of 1D ETMs and their application in PSCs.We hence timely summarize the advances in 1D ETMs-based solar cells,emphasizing on the fundamental and optimization issues of charge separation and collection ability,and their influence on PV performance.After sketching the classification and requirements for high-efficiency 1D nanostructured solar cells,we highlight the applicability of 1D TiO_(2)nanostructures in PSCs,including nanotubes,nanorods,nanocones,and nanopyramids,and carefully analyze how the electrostatic field affects cell performance.Other kinds of oriented nanostructures,e.g.,ZnO and SnO_(2)ETMs,are also described.Finally,we discuss the challenges and propose some potential strategies to further boost device performance.This review provides a broad range of valuable work in this fast-developing field,which we hope will stimulate research enthusiasm to push PSCs to an unprecedented level.

Performance improvement of AlGaN-based deep ultraviolet light-emitting diodes with double electron blocking layers

The AlGaN-based deep ultraviolet light-emitting diodes（LED） with double electron blocking layers（d-EBLs） on both sides of the active region are investigated theoretically. They possess many excellent performances compared with the conventional structure with only a single electron blocking layer, such as a higher recombination rate, improved light output power and internal quantum efficiency（IQE）. The reasons can be concluded as follows. On the one hand, the weakened electrostatic field within the quantum wells（QWs） enhances the electron–hole spatial overlap in QWs, and therefore increases the probability of radioactive recombination. On the other hand, the added n-AlGaN layer can not only prevent holes from overflowing into the n-side region but also act as another electron source, providing more electrons.

Adaptive Trajectory Tracking Control of Wheeled Mobile Robots with Nonholonomic Constraint

A mobile robot is one of the well-known nonholonomic systems. In this paper, a new adaptive tracking controller for the kinematic model of a nonholonomic mobile robot with unknown parameters is proposed. Stability of the rule is proved through the use of a Liapunov function. The artificial electrostatic field cooperates with error posture in steering in the controller. At last, this method is implemented on the simulations and the wheeled mobile robot. Results show the effectiveness of the controllers.

Droop improvement in blue InGaN light-emitting diodes with GaN/InGaN superlattice barriers

GaN/InGaN superlattice barriers are used in InGaN-based light-emitting diodes （LEDs）. The electrostatic field in the quantum wells, electron hole wavefunction overlap, carrier concentration, spontaneous emission spectrum, light-current performance curve, and internal quantum efficiency are numerically investigated using the APSYS simulation software. It is found that the structure with GaN/InGaN superlattice barriers shows improved light output power, and lower current leakage and efficiency droop. According to our numerical simulation and analysis, these improvements in the electrical and optical characteristics are mainly attributed to the alleviation of the electrostatic field in the active region.

Efficiency enhancement of InGaN based blue light emitting diodes with InGaN/GaN multilayer barriers

The advantages of InGaN based light-emitting diodes with InGaN/GaN multilayer barriers are studied. It is found that the structure with InGaN/GaN multilayer barriers shows improved light output power, lower current leakage, and less efficiency droop over its conventional InGaN/GaN counterparts. Based on the numerical simulation and analysis, these improvements on the electrical and the optical characteristics are mainly attributed to the alleviation of the electrostatic field in the quantum wells （QWs） when the InGaN/GaN multilayer barriers are used.