A simple, low-cost, and home-built electrostatic spray deposition （ESD） system with the stable cone-jet mode was used to deposit nickel oxide （NiO） thin films on glass substrates kept at temperature of 400 ℃ as t...A simple, low-cost, and home-built electrostatic spray deposition （ESD） system with the stable cone-jet mode was used to deposit nickel oxide （NiO） thin films on glass substrates kept at temperature of 400 ℃ as the primary precursor solution of 0.1 M concentration hydrated nickel chloride was dissolved in isopropyl alcohol. Electrical measurements showed that these films were of n-type conductivity while their resistance response to hydrogen flow in air ambient was varied by 2.81% with the rise and recovery time of 48 s and 40 s, respectively.展开更多
CuFe2O4 network,prepared via the electrostatic spray deposition technique,with high reversible capacity and long cycle lifetime for lithium ion battery anode material has been reported.The reversible capacity can be f...CuFe2O4 network,prepared via the electrostatic spray deposition technique,with high reversible capacity and long cycle lifetime for lithium ion battery anode material has been reported.The reversible capacity can be further enhanced by coating high electronic conductive polypyrrole（PPy）.At the current density of 100mA·g-1.Li/CuFe2O4 electrode delivers a reversible capacity of 842.9 mAh·g-1 while the reversible capacity of Li/PPy-coated CuFe2O4 electrode increases up to 1106.7 mAh-g’.A high capacity of 640.7 mAhg＂1 for the Li/PPy-coated CuFe2O4electrode is maintained in contrast of 398.9 mAh·g-1 for CuFe2O4 electrode after 60 cycles,which demonstrates good electrochemical performance of the composite due to the increase of electronic conductivity.The electrochemical impedance spectroscopy（EIS） further reveals that the Li/PPy-coated CuFe2O4 electrode has a lower charge transfer resistance than the Li/CuFe2C〉4 electrode.展开更多
文摘A simple, low-cost, and home-built electrostatic spray deposition （ESD） system with the stable cone-jet mode was used to deposit nickel oxide （NiO） thin films on glass substrates kept at temperature of 400 ℃ as the primary precursor solution of 0.1 M concentration hydrated nickel chloride was dissolved in isopropyl alcohol. Electrical measurements showed that these films were of n-type conductivity while their resistance response to hydrogen flow in air ambient was varied by 2.81% with the rise and recovery time of 48 s and 40 s, respectively.
基金supported by the 973 Project of China(No.2011CB935901)the National Nature Science Foundations of China(No.21203111,91022033)
文摘CuFe2O4 network,prepared via the electrostatic spray deposition technique,with high reversible capacity and long cycle lifetime for lithium ion battery anode material has been reported.The reversible capacity can be further enhanced by coating high electronic conductive polypyrrole（PPy）.At the current density of 100mA·g-1.Li/CuFe2O4 electrode delivers a reversible capacity of 842.9 mAh·g-1 while the reversible capacity of Li/PPy-coated CuFe2O4 electrode increases up to 1106.7 mAh-g’.A high capacity of 640.7 mAhg＂1 for the Li/PPy-coated CuFe2O4electrode is maintained in contrast of 398.9 mAh·g-1 for CuFe2O4 electrode after 60 cycles,which demonstrates good electrochemical performance of the composite due to the increase of electronic conductivity.The electrochemical impedance spectroscopy（EIS） further reveals that the Li/PPy-coated CuFe2O4 electrode has a lower charge transfer resistance than the Li/CuFe2C〉4 electrode.
