Using the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with asymmetric colfinear cracks in a one-dimensional hexagonal quasi-crystal is solv...Using the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with asymmetric colfinear cracks in a one-dimensional hexagonal quasi-crystal is solved, and the exact analytic solutions of the stress intensity factors (SIFs) for mode Ⅲ problem are obtained. Under the limiting conditions, the present results reduce to the Griffith crack and many new results obtained as well, such as the circular hole with asymmetric collinear cracks, the elliptic hole with a straight crack, the mode T crack, the cross crack and so on. As far as the phonon field is concerned, these results, which play an important role in many practical and theoretical applications, are shown to be in good agreement with the classical results.展开更多
The existing investigations on piezoelectric materials containing an elliptic hole mainly focus on remote uniform tensile loads. In order to have a better understanding of the fracture behavior of piezoelectric materi...The existing investigations on piezoelectric materials containing an elliptic hole mainly focus on remote uniform tensile loads. In order to have a better understanding of the fracture behavior of piezoelectric materials under different loading conditions, theoretical and numerical solutions are presented for an elliptic hole in transversely isotropic piezoelectric materials subjected to uniform internal shearing forces based on the complex potential approach. By solving ten variable linear equations, the analytical solutions inside and outside the hole satisfying the permeable electric boundary conditions are obtained. Taking PZT-4 ceramic into consideration, numerical results of electro-elastic fields along the edge of the hole and axes, and the electric displacements in the hole are presented. Comparison with stresses in transverse isotropic elastic materials shows that the hoop stress at the ends of major axis in two kinds of material equals zero for the various ratios of major to minor axis lengths; If the ratio is greater than 1, the hoop stress in piezoelectric materials is smaller than that in elastic materials, and if the ratio is smaller than 1, the hoop stress in piezoelectric materials is greater than that in elastic materials; When it is a circle hole, the shearing stress in two materials along axes is the same. The distribution of electric displacement components shows that the vertical electric displacement in the hole and along axes in the material is always zero though under the permeable electric boundary condition; The horizontal and vertical electric displacement components along the edge of the hole are symmetrical and antisymmetrical about horizontal axis, respectively. The stress and electric displacement distribution tends to zero at distances far from the elliptical hole, which conforms to the conclusion usually made on the basis of Saint-Venant’s principle. Unlike the existing work, uniform shearing forces acting on the edge of the hole, and the distribution of electro-elastic fields inside and outside the elliptic hole are considered.展开更多
The complex variable method for solving the two-dimensional thermal stress problem of icosahedral quasicrystals is stated. The closed-form solutions for icosahedral quasicrystals containing an elliptical hole subjecte...The complex variable method for solving the two-dimensional thermal stress problem of icosahedral quasicrystals is stated. The closed-form solutions for icosahedral quasicrystals containing an elliptical hole subjected to a remote uniform heat flow are obtained. When the hole degenerates into a crack, the explicit solutions for the stress intensity factors is presented.展开更多
The generalized 2D problem of icosahedral quasicrystals containing an elliptic hole is considered by using the ex- tended Stroh formalism. The closed-form solutions for the displacements and stresses are obtained unde...The generalized 2D problem of icosahedral quasicrystals containing an elliptic hole is considered by using the ex- tended Stroh formalism. The closed-form solutions for the displacements and stresses are obtained under general loading conditions. The solution of the Griffith crack problem as a special case of the results is also observed. The stress intensity factor and strain energy release rate are given. The effect of the phonon-phason coupling elastic constant on the mechanical behavior is also discussed.展开更多
The existing investigations on piezoelectric materials containing an elliptic hole or a crack mainly focus on remote uniform tensile loads.In order to have a better understanding for the fracture behavior of piezoelec...The existing investigations on piezoelectric materials containing an elliptic hole or a crack mainly focus on remote uniform tensile loads.In order to have a better understanding for the fracture behavior of piezoelectric materials under different loading conditions,theoretical and numerical solutions are presented for an elliptic hole or a crack in transversely isotropic piezoelectric materials subjected to uniform internal pressure and remote electro-mechanical loads.On the basis of the complex variable approach,analytical solutions of the elastic and electric fields inside and outside the defect are derived by satisfying permeable electric boundary condition at the surface of the elliptical hole.As an example of PZT-4 ceramics,numerical results of electro-elastic fields inside and outside the crack under various electric boundary conditions and electro-mechanical loads are given,and graphs of the electro-elastic fields in the vicinity of the crack tip are presented.The non-singular term is compared to the asymptotic one in the figures.It is shown that the dielectric constant of the air in the crack has no effect on the electric displacement component perpendicular to the crack,and the stresses in the piezoelectric material depend on the material properties and the mechanical loads on the crack surface and at infinity,but not on the electric loads at infinity.The figures obtained are strikingly similar to the available results.Unlike the existing work,the existence of electric fields inside an elliptic hole or a crack is considered,and the piezoelectric solid is subjected to complicated electro-mechanical loads.展开更多
The stress potential function theory for the plane elasticity of octagonal quasicrystals is developed. By introducing stress functions, a large number of basic equations involving the elasticity of octagonal quasicrys...The stress potential function theory for the plane elasticity of octagonal quasicrystals is developed. By introducing stress functions, a large number of basic equations involving the elasticity of octagonal quasicrystals are reduced to a single partial differential equation. Furthermore, we develop the complex variable function method (Lekhnitskii method) for anisotropic elasticity theory to that for quasicrystals. With the help of conformal transformation, an exact solution for the elliptic hole of quasicrystals is presented. The solution of the Griffith crack problem, as a special case of the results, is obtained. As a consequence, the phonon stress intensity factor is derived analytically.展开更多
Based on the complex potential method, the Greed’s functions of the plane problem in transversely isotropic piezoelectric media with an elliptic hole are obtained in terms of exact electric boundary conditions at th...Based on the complex potential method, the Greed’s functions of the plane problem in transversely isotropic piezoelectric media with an elliptic hole are obtained in terms of exact electric boundary conditions at the rim of the hole. When foe elliptic hole degenerates into a crack, the fundamental solutions for the field intensity factors arc given. The general solutions for concentrated and distributed loads applied on the surface of the hole or crack are produced through the superposition of fundamental solutions With the aid of these solutions , some erroneous results provided previously in other works are pointed out More important is that these solutions can be used as the fundamental solutions of boundary element method to solve more practical problems in piezoelectric media.展开更多
The method of complex function and the method of Green's function are used to investigate the problem of SH-wave scattering by radial cracks of any limited length along the radius originating at the boundary of an...The method of complex function and the method of Green's function are used to investigate the problem of SH-wave scattering by radial cracks of any limited length along the radius originating at the boundary of an elliptical hole, and the solution of dynamic stress intensity factor at the crack tip was given. A Green's function was constructed for the problem, which is a basic solution of displacement field for an elastic half space containing a half elliptical gap impacted by anti-plane harmonic linear source force at any point of its horizontal boundary. With division of a crack technique, a series of integral equations can be established on the conditions of continuity and the solution of dynamic stress intensity factor can be obtained. The influence of an elliptical hole on the dynamic stress intensity factor at the crack tip was discussed.展开更多
By means of the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with two straight cracks in one-dimensional hexagonal quasicrystals is investig...By means of the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with two straight cracks in one-dimensional hexagonal quasicrystals is investigated. The solution of the stress intensity factor (SIF) for mode III problem has been found. Under the condition of limitation, both the known results and the SIF solution at the crack tip of a circular hole with two straight cracks and cross crack in one-dimensional hexagonal quasicrystals can be obtained.展开更多
In the present paper, closed form singular solutions for an infinite anisotropic plate with an elliptic hole or crack are derived based on the Stroh-type formalism for the general anisotropic plate. With the solutions...In the present paper, closed form singular solutions for an infinite anisotropic plate with an elliptic hole or crack are derived based on the Stroh-type formalism for the general anisotropic plate. With the solutions, the hoop stresses and hoop moments around the elliptic hole as well as the stress intensity factors at the crack tip under concentrated in-plane stresses and bending moments are obtained. The singular solutions can be used for approximate analysis of an anisotropic plate weakened by a hole or a crack under concentrated forces and moments. They can also be used as fundamental solutions of boundary integral equations in BEM analysis for anisotropic plates with holes or cracks under general force and boundary conditions.展开更多
By using Stroh' complex formalism and Cauchy's integral method, the electro-elastic fundamental solutions of an infinite anisotropic piezoelectric solid containing an elliptic hole or a crack subjected to a Li...By using Stroh' complex formalism and Cauchy's integral method, the electro-elastic fundamental solutions of an infinite anisotropic piezoelectric solid containing an elliptic hole or a crack subjected to a Line force and a line charge are presented in closed form. Particular attention is paid to analyzing the characteristics of the stress and electric displacement intensity factors. When a line force-charge acts on the crack surface, the real form expression of intensity factors is obtained. It is shown through a special example that the present work is correct.展开更多
The interaction between screw dislocations and two asymmetrical interfacial cracks emanating from an elliptic hole under loads at infinity is studied. The closed-form solution is derived for complex potentials. The st...The interaction between screw dislocations and two asymmetrical interfacial cracks emanating from an elliptic hole under loads at infinity is studied. The closed-form solution is derived for complex potentials. The stress intensity factor and the critical applied stress for the dislocation emission are also calculated. In the limiting cases, well-known results can be obtained from the present solutions. Moreover, new exact solutions for a screw dislocation interacting with some complicated cracks are derived. The results show that the shielding effect increases with the increase in the length of the other cracks and the minor semi axis, but decreases with the increase of dislocation azimuth. The repulsion acting on the dislocation from the other phase and the other crack extend in the horizontal direction, which makes the dislocation emission at the crack tip take place more easily, but the minor semi axis of the elliptical hole extending in the vertical direction makes it more difficult.展开更多
The existing analytical solutions are extended to obtain the stress fields and the stress intensity factors(SIFs) of two unequal aligned cracks emanating from an elliptical hole in an infinite isotropic plane. A confo...The existing analytical solutions are extended to obtain the stress fields and the stress intensity factors(SIFs) of two unequal aligned cracks emanating from an elliptical hole in an infinite isotropic plane. A conformal mapping is proposed and combined with the complex variable method. Due to some difficulties in the calculation of the stress function, the mapping function is approximated and simplified via the applications of the series expansion. To validate the obtained solution, several examples are analyzed with the proposed method, the finite element method, etc. In addition, the effects of the lengths of the cracks and the ratio of the semi-axes of the elliptical hole(a/b) on the SIFs are studied. The results show that the present analytical solution is applicable to the SIFs for small cracks.展开更多
The interaction between a screw dislocation and an elliptical hole with two asymmetrical cracks in a one-dimensional(1 D) hexagonal quasicrystal with piezoelectric effect is considered. A general formula of the genera...The interaction between a screw dislocation and an elliptical hole with two asymmetrical cracks in a one-dimensional(1 D) hexagonal quasicrystal with piezoelectric effect is considered. A general formula of the generalized stress field, the field intensity factor, and the image force is derived, and the special cases are discussed. Several numerical examples are given to show the effects of the material properties and the dislocation position on the field intensity factors and the image forces.展开更多
A detailed theoretical construction of general coupled 3DFEM analyses of anisotropic dielectrics is first presented by considering the electric body force and body couple moment.A 3Delectrostrictive element is subsequ...A detailed theoretical construction of general coupled 3DFEM analyses of anisotropic dielectrics is first presented by considering the electric body force and body couple moment.A 3Delectrostrictive element is subsequently defined in ABAQUS user subroutine UEL and the post-processing of finite element method(FEM)results is realized by UVARM and dummy element method.Then the developed technique is used to solve the electro-elastic field of an isotropic electrostrictive plate with an elliptical hole subjected to electrical load.By comparing the coupled and uncoupled numerical results,the traditional uncoupled analytical method can cause a large error when the applied electric field or the electrostrictive performance of the dielectric is high,and thus the present coupled analysis is especially necessary.展开更多
Two explicit expressions of the stress concentration factor for a tension finite-width strip with a central elliptical hole and an eccentric elliptical hole, respectively, are formulated by using a semi-analytical and...Two explicit expressions of the stress concentration factor for a tension finite-width strip with a central elliptical hole and an eccentric elliptical hole, respectively, are formulated by using a semi-analytical and semi-empiricai method. Accuracy of the results obtained from these expressions is better, and application scope is wider, than the results of Durelli's photo-elastic experiment and Isida's formula. When eccentricity of the elliptical hole is within a certain range, the error is less than 8%. Based on the relation between the stress concentration factor and the stress intensity factor, a stress intensity factor expression for tension strips with a center or an eccentric crack is derived with the obtained stress concentration factor expressions. Compared with the existing formulae and the finite element analysis, this stress intensity factor expression also has sufficient accuracy.展开更多
The polarization of traditional photonic crystal(PC) vertical cavity surface emitting laser(VCSEL) is uncontrollable,resulting in the bit error increasing easily.Elliptical hole photonic crystal can control the tr...The polarization of traditional photonic crystal(PC) vertical cavity surface emitting laser(VCSEL) is uncontrollable,resulting in the bit error increasing easily.Elliptical hole photonic crystal can control the transverse mode and polarization of VCSEL efficiently.We analyze the far field divergence angle,and birefringence of elliptical hole PC VCSEL.When the ratio of minor axis to major axis b/a = 0.7,the PC VCSEL can obtain single mode and polarization.According to the simulation results,we fabricate the device successfully.The output power is 1.7 mW,the far field divergence angle is less than 10°,and the side mode suppression ratio is over 30 dB.The output power in the Y direction is 20 times that in the X direction.展开更多
The hatches for inspecting are usually designed with elliptical holes in airplane structures, so computation of the stress intensity factor of three dimensional crack at elliptical holes is pivotal for damage toleranc...The hatches for inspecting are usually designed with elliptical holes in airplane structures, so computation of the stress intensity factor of three dimensional crack at elliptical holes is pivotal for damage tolerance analysis of these structures. In this paper, weight function is derived for a two dimensional through cracks at elliptical holes by applying a compounding method. Stress intensity factor formulas for an internal surface semi-elliptical crack in elliptical holes are obtained wing the three dimensional weight function method. Stress intensity factors for an internal surface semi-elliptical crack in elliptical holes under remote tension are computed. At the same time, research on how radius of curvature for elliptical holes affect stress intensity factors was conducted. Stress intensity factors decrease when radius of curvature increases. Some results and conclusions which are of practical value are given.展开更多
Up to now the analysis on aisnotropic effects of quasi-isotropic composites to material structures has not been found in literatures. In the present paper the strength model for triaxial woven materials proposed in ...Up to now the analysis on aisnotropic effects of quasi-isotropic composites to material structures has not been found in literatures. In the present paper the strength model for triaxial woven materials proposed in Part (I)[1]is applied to study the problems of an infintiely large plate of triaxial woven material containing either an either an elliptic hole or a crack. TO the elliptic hole problem the remote coritical loading as a function of the geometric parameters of woven materials is analysed and to the crack problem, the cracking orientation is examined. Finally the elasticity and strength models for a triaxial woven material proposed in Part (I)are verfied in terms of micromechanical analysis.展开更多
Tuning band gaps in soft materials by post-buckling deformation is becoming an appealing means to manipulate elastic waves. As one of the most favorable topologies, two- dimensional soft structures with circular holes...Tuning band gaps in soft materials by post-buckling deformation is becoming an appealing means to manipulate elastic waves. As one of the most favorable topologies, two- dimensional soft structures with circular holes have been extensively studied. Based on the contrarian thinking, this paper starts from the two-dimensional soft structures with criss-crossed elliptical holes, which is close to the post-buckling configuration of soft structures with circular holes, and then proposes to tune the band gaps through elongating or stretching rather than compressing. Influences of the loading magnitude and loading pattern (i.e., uniaxial and biaxial elongations) on the band gaps are studied via the nonlinear finite element simulations. Effects of the geometric parameters (the major-to-minor half-axis ratio and the porosity of the structure) are also discussed. It is shown that, compared with the traditional circular hole case, the band gaps of the unloaded structure with criss-crossed elliptical holes are much richer, and they could be reversely and continuously tuned by tensile loadings. In particular, the deformation is very robust and is insensitive to small geometric imperfections, which is always necessary for triggering the post-buckling deformations. The present work provides a useful reference to the manipula- tion of elastic waves in periodic structures as well as the design of soft phononic crystals/acoustic devices.展开更多
基金supported by the National Natural Science Foundation of China (Grant No 10761005)the Inner Mongolia Natural Science Foundation of China (Grant No 200607010104)
文摘Using the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with asymmetric colfinear cracks in a one-dimensional hexagonal quasi-crystal is solved, and the exact analytic solutions of the stress intensity factors (SIFs) for mode Ⅲ problem are obtained. Under the limiting conditions, the present results reduce to the Griffith crack and many new results obtained as well, such as the circular hole with asymmetric collinear cracks, the elliptic hole with a straight crack, the mode T crack, the cross crack and so on. As far as the phonon field is concerned, these results, which play an important role in many practical and theoretical applications, are shown to be in good agreement with the classical results.
基金supported by Hebei Provincial Natural Science Foundation of China (Grant No. A2011210033)Foundation of Hebei Provincial Education Department of China (Grant No. ZH2011116)Hebei Provincial Research Program for Higher Education and Teaching Reform of China (Grant No. 103024)
文摘The existing investigations on piezoelectric materials containing an elliptic hole mainly focus on remote uniform tensile loads. In order to have a better understanding of the fracture behavior of piezoelectric materials under different loading conditions, theoretical and numerical solutions are presented for an elliptic hole in transversely isotropic piezoelectric materials subjected to uniform internal shearing forces based on the complex potential approach. By solving ten variable linear equations, the analytical solutions inside and outside the hole satisfying the permeable electric boundary conditions are obtained. Taking PZT-4 ceramic into consideration, numerical results of electro-elastic fields along the edge of the hole and axes, and the electric displacements in the hole are presented. Comparison with stresses in transverse isotropic elastic materials shows that the hoop stress at the ends of major axis in two kinds of material equals zero for the various ratios of major to minor axis lengths; If the ratio is greater than 1, the hoop stress in piezoelectric materials is smaller than that in elastic materials, and if the ratio is smaller than 1, the hoop stress in piezoelectric materials is greater than that in elastic materials; When it is a circle hole, the shearing stress in two materials along axes is the same. The distribution of electric displacement components shows that the vertical electric displacement in the hole and along axes in the material is always zero though under the permeable electric boundary condition; The horizontal and vertical electric displacement components along the edge of the hole are symmetrical and antisymmetrical about horizontal axis, respectively. The stress and electric displacement distribution tends to zero at distances far from the elliptical hole, which conforms to the conclusion usually made on the basis of Saint-Venant’s principle. Unlike the existing work, uniform shearing forces acting on the edge of the hole, and the distribution of electro-elastic fields inside and outside the elliptic hole are considered.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11072104,11272053,and 11262017)the Key Project of Chinese Ministry of Education(Grant No.212029)+3 种基金the Natural Science Foundation of Inner Mongolia Autonomous Region,China(Grant No.2013MS0114)the Natural Science Foundation of Inner Mongolia Department of Public Education,China(Grant No.NJZZ13037)the Program for Young Talents of Science and Technology in Universities of Inner Mongolia Autonomous Region,China(Grant No.NJYT-13-B07)the Program for Higher-Level Talents of Inner Mongolia University,China(Grant No.125125)
文摘The complex variable method for solving the two-dimensional thermal stress problem of icosahedral quasicrystals is stated. The closed-form solutions for icosahedral quasicrystals containing an elliptical hole subjected to a remote uniform heat flow are obtained. When the hole degenerates into a crack, the explicit solutions for the stress intensity factors is presented.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11072104,1272053,and 11262017)the Key Project of Chinese Ministry of Education(Grant No.212029)+3 种基金the Natural Science Foundation of Inner Mongolia Autonomous Region,China(Grant No.2013MS0114)the Natural Science Foundation of Inner Mongolia Department of Public Education,China(Grant No.NJZZ13037)the Program for Young Talents of Science and Technology in Universities of Inner Mongolia Autonomous Region,China(Grant No.NJYT-13-B07)the Program of Higher-level Talents of Inner Mongolia University,China(Grant No.125125)
文摘The generalized 2D problem of icosahedral quasicrystals containing an elliptic hole is considered by using the ex- tended Stroh formalism. The closed-form solutions for the displacements and stresses are obtained under general loading conditions. The solution of the Griffith crack problem as a special case of the results is also observed. The stress intensity factor and strain energy release rate are given. The effect of the phonon-phason coupling elastic constant on the mechanical behavior is also discussed.
基金supported by Hebei Provincial Natural Science Foundation of China (Grant No. A2011210033)Foundation of Hebei Education Department of China (Grant No. ZH2011116)Hebei Provincial Research Program for Higher Education and Teaching Reformof China (Grant No. 103024)
文摘The existing investigations on piezoelectric materials containing an elliptic hole or a crack mainly focus on remote uniform tensile loads.In order to have a better understanding for the fracture behavior of piezoelectric materials under different loading conditions,theoretical and numerical solutions are presented for an elliptic hole or a crack in transversely isotropic piezoelectric materials subjected to uniform internal pressure and remote electro-mechanical loads.On the basis of the complex variable approach,analytical solutions of the elastic and electric fields inside and outside the defect are derived by satisfying permeable electric boundary condition at the surface of the elliptical hole.As an example of PZT-4 ceramics,numerical results of electro-elastic fields inside and outside the crack under various electric boundary conditions and electro-mechanical loads are given,and graphs of the electro-elastic fields in the vicinity of the crack tip are presented.The non-singular term is compared to the asymptotic one in the figures.It is shown that the dielectric constant of the air in the crack has no effect on the electric displacement component perpendicular to the crack,and the stresses in the piezoelectric material depend on the material properties and the mechanical loads on the crack surface and at infinity,but not on the electric loads at infinity.The figures obtained are strikingly similar to the available results.Unlike the existing work,the existence of electric fields inside an elliptic hole or a crack is considered,and the piezoelectric solid is subjected to complicated electro-mechanical loads.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 11026175, 11262017, and 10761005)the Key Project of Ministry of Education of China (Grant No. 212029)+1 种基金the Natural Science Foundation of Inner Mongolia, China (Grant Nos. 2009MS0102 and 2009BS0104)the Natural Science Foundation of Inner Mongolia Department of Public Education, China (Grant Nos. NJzy08024 and NJ10047)
文摘The stress potential function theory for the plane elasticity of octagonal quasicrystals is developed. By introducing stress functions, a large number of basic equations involving the elasticity of octagonal quasicrystals are reduced to a single partial differential equation. Furthermore, we develop the complex variable function method (Lekhnitskii method) for anisotropic elasticity theory to that for quasicrystals. With the help of conformal transformation, an exact solution for the elliptic hole of quasicrystals is presented. The solution of the Griffith crack problem, as a special case of the results, is obtained. As a consequence, the phonon stress intensity factor is derived analytically.
文摘Based on the complex potential method, the Greed’s functions of the plane problem in transversely isotropic piezoelectric media with an elliptic hole are obtained in terms of exact electric boundary conditions at the rim of the hole. When foe elliptic hole degenerates into a crack, the fundamental solutions for the field intensity factors arc given. The general solutions for concentrated and distributed loads applied on the surface of the hole or crack are produced through the superposition of fundamental solutions With the aid of these solutions , some erroneous results provided previously in other works are pointed out More important is that these solutions can be used as the fundamental solutions of boundary element method to solve more practical problems in piezoelectric media.
文摘The method of complex function and the method of Green's function are used to investigate the problem of SH-wave scattering by radial cracks of any limited length along the radius originating at the boundary of an elliptical hole, and the solution of dynamic stress intensity factor at the crack tip was given. A Green's function was constructed for the problem, which is a basic solution of displacement field for an elastic half space containing a half elliptical gap impacted by anti-plane harmonic linear source force at any point of its horizontal boundary. With division of a crack technique, a series of integral equations can be established on the conditions of continuity and the solution of dynamic stress intensity factor can be obtained. The influence of an elliptical hole on the dynamic stress intensity factor at the crack tip was discussed.
基金Project supported by the National Natural Science Foundation of China(No.10761005)the Natural Science Foundation of Inner Mongolia Autonomous Region(No.200607010104)
文摘By means of the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with two straight cracks in one-dimensional hexagonal quasicrystals is investigated. The solution of the stress intensity factor (SIF) for mode III problem has been found. Under the condition of limitation, both the known results and the SIF solution at the crack tip of a circular hole with two straight cracks and cross crack in one-dimensional hexagonal quasicrystals can be obtained.
基金Project supported by the National Natural Science Foundation of China (No. 10102019).
文摘In the present paper, closed form singular solutions for an infinite anisotropic plate with an elliptic hole or crack are derived based on the Stroh-type formalism for the general anisotropic plate. With the solutions, the hoop stresses and hoop moments around the elliptic hole as well as the stress intensity factors at the crack tip under concentrated in-plane stresses and bending moments are obtained. The singular solutions can be used for approximate analysis of an anisotropic plate weakened by a hole or a crack under concentrated forces and moments. They can also be used as fundamental solutions of boundary integral equations in BEM analysis for anisotropic plates with holes or cracks under general force and boundary conditions.
基金The project supported by the Fund of the State Education Commission of China for Excellent Young Teachers
文摘By using Stroh' complex formalism and Cauchy's integral method, the electro-elastic fundamental solutions of an infinite anisotropic piezoelectric solid containing an elliptic hole or a crack subjected to a Line force and a line charge are presented in closed form. Particular attention is paid to analyzing the characteristics of the stress and electric displacement intensity factors. When a line force-charge acts on the crack surface, the real form expression of intensity factors is obtained. It is shown through a special example that the present work is correct.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 11172094 and 11172095)the Program for New Century Excellent Talents in University of Ministry of Education of China (Grant No. NCET-11-0122)+1 种基金the Science Fund of State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, China (Grant Nos. 61075005 and 51075001)the Fundamental Research Funds for the Central Universities (Hunan University), China
文摘The interaction between screw dislocations and two asymmetrical interfacial cracks emanating from an elliptic hole under loads at infinity is studied. The closed-form solution is derived for complex potentials. The stress intensity factor and the critical applied stress for the dislocation emission are also calculated. In the limiting cases, well-known results can be obtained from the present solutions. Moreover, new exact solutions for a screw dislocation interacting with some complicated cracks are derived. The results show that the shielding effect increases with the increase in the length of the other cracks and the minor semi axis, but decreases with the increase of dislocation azimuth. The repulsion acting on the dislocation from the other phase and the other crack extend in the horizontal direction, which makes the dislocation emission at the crack tip take place more easily, but the minor semi axis of the elliptical hole extending in the vertical direction makes it more difficult.
文摘The existing analytical solutions are extended to obtain the stress fields and the stress intensity factors(SIFs) of two unequal aligned cracks emanating from an elliptical hole in an infinite isotropic plane. A conformal mapping is proposed and combined with the complex variable method. Due to some difficulties in the calculation of the stress function, the mapping function is approximated and simplified via the applications of the series expansion. To validate the obtained solution, several examples are analyzed with the proposed method, the finite element method, etc. In addition, the effects of the lengths of the cracks and the ratio of the semi-axes of the elliptical hole(a/b) on the SIFs are studied. The results show that the present analytical solution is applicable to the SIFs for small cracks.
基金Project supported by the National Natural Science Foundation of China(Nos.11962026,11462020,11862021,and 11502123)the Inner Mongolia Natural Science Foundation of China(Nos.2017MS0104 and NJZY18022)。
文摘The interaction between a screw dislocation and an elliptical hole with two asymmetrical cracks in a one-dimensional(1 D) hexagonal quasicrystal with piezoelectric effect is considered. A general formula of the generalized stress field, the field intensity factor, and the image force is derived, and the special cases are discussed. Several numerical examples are given to show the effects of the material properties and the dislocation position on the field intensity factors and the image forces.
基金Supported by the National Natural Science Foundation of China(11232007)the Priority Academic Program Development of Jiangsu Higher Education Institutions+1 种基金the Jiangsu Innovation Program for Graduate Education(CXLX12_0133)the Jiangsu Innovation Program for Graduate Education (the Fundamental Research Funds for the Central Universities)(CXZZ12_0138)
文摘A detailed theoretical construction of general coupled 3DFEM analyses of anisotropic dielectrics is first presented by considering the electric body force and body couple moment.A 3Delectrostrictive element is subsequently defined in ABAQUS user subroutine UEL and the post-processing of finite element method(FEM)results is realized by UVARM and dummy element method.Then the developed technique is used to solve the electro-elastic field of an isotropic electrostrictive plate with an elliptical hole subjected to electrical load.By comparing the coupled and uncoupled numerical results,the traditional uncoupled analytical method can cause a large error when the applied electric field or the electrostrictive performance of the dielectric is high,and thus the present coupled analysis is especially necessary.
基金supported by the National Natural Science Foundation of China (No. 51179115)
文摘Two explicit expressions of the stress concentration factor for a tension finite-width strip with a central elliptical hole and an eccentric elliptical hole, respectively, are formulated by using a semi-analytical and semi-empiricai method. Accuracy of the results obtained from these expressions is better, and application scope is wider, than the results of Durelli's photo-elastic experiment and Isida's formula. When eccentricity of the elliptical hole is within a certain range, the error is less than 8%. Based on the relation between the stress concentration factor and the stress intensity factor, a stress intensity factor expression for tension strips with a center or an eccentric crack is derived with the obtained stress concentration factor expressions. Compared with the existing formulae and the finite element analysis, this stress intensity factor expression also has sufficient accuracy.
基金Project supported by the National High Technology Research and Development Program of China (Grant No. 2008AA03Z402)the Beijing Municipal Natural Science Foundation,China (Grant Nos. 4092007,4112006,4102003,and 4132006)+1 种基金the National Natural Science Foundation of China (Grant Nos. 61076044,61036002,61036009,and 60978067)the Doctoral Fund of the Ministry of Education of China (Grant No. 20121103110018)
文摘The polarization of traditional photonic crystal(PC) vertical cavity surface emitting laser(VCSEL) is uncontrollable,resulting in the bit error increasing easily.Elliptical hole photonic crystal can control the transverse mode and polarization of VCSEL efficiently.We analyze the far field divergence angle,and birefringence of elliptical hole PC VCSEL.When the ratio of minor axis to major axis b/a = 0.7,the PC VCSEL can obtain single mode and polarization.According to the simulation results,we fabricate the device successfully.The output power is 1.7 mW,the far field divergence angle is less than 10°,and the side mode suppression ratio is over 30 dB.The output power in the Y direction is 20 times that in the X direction.
文摘The hatches for inspecting are usually designed with elliptical holes in airplane structures, so computation of the stress intensity factor of three dimensional crack at elliptical holes is pivotal for damage tolerance analysis of these structures. In this paper, weight function is derived for a two dimensional through cracks at elliptical holes by applying a compounding method. Stress intensity factor formulas for an internal surface semi-elliptical crack in elliptical holes are obtained wing the three dimensional weight function method. Stress intensity factors for an internal surface semi-elliptical crack in elliptical holes under remote tension are computed. At the same time, research on how radius of curvature for elliptical holes affect stress intensity factors was conducted. Stress intensity factors decrease when radius of curvature increases. Some results and conclusions which are of practical value are given.
文摘Up to now the analysis on aisnotropic effects of quasi-isotropic composites to material structures has not been found in literatures. In the present paper the strength model for triaxial woven materials proposed in Part (I)[1]is applied to study the problems of an infintiely large plate of triaxial woven material containing either an either an elliptic hole or a crack. TO the elliptic hole problem the remote coritical loading as a function of the geometric parameters of woven materials is analysed and to the crack problem, the cracking orientation is examined. Finally the elasticity and strength models for a triaxial woven material proposed in Part (I)are verfied in terms of micromechanical analysis.
基金The work was supported by the National Natural Science Foundation of China (11532001, 11621062). Partial support from the Fundamental Research Funds for the Central Universities (No. 2016XZZX001-05) is also acknowledged. The work was also supported by the Shenzhen Scientific and Technological Fund for R & D (No. JCYJ20170816172316775).
文摘Tuning band gaps in soft materials by post-buckling deformation is becoming an appealing means to manipulate elastic waves. As one of the most favorable topologies, two- dimensional soft structures with circular holes have been extensively studied. Based on the contrarian thinking, this paper starts from the two-dimensional soft structures with criss-crossed elliptical holes, which is close to the post-buckling configuration of soft structures with circular holes, and then proposes to tune the band gaps through elongating or stretching rather than compressing. Influences of the loading magnitude and loading pattern (i.e., uniaxial and biaxial elongations) on the band gaps are studied via the nonlinear finite element simulations. Effects of the geometric parameters (the major-to-minor half-axis ratio and the porosity of the structure) are also discussed. It is shown that, compared with the traditional circular hole case, the band gaps of the unloaded structure with criss-crossed elliptical holes are much richer, and they could be reversely and continuously tuned by tensile loadings. In particular, the deformation is very robust and is insensitive to small geometric imperfections, which is always necessary for triggering the post-buckling deformations. The present work provides a useful reference to the manipula- tion of elastic waves in periodic structures as well as the design of soft phononic crystals/acoustic devices.