Study on the Technology of Spacecraft Dynamic Simulation and Emulation

To meet the requirements and functions of spacecraft dynamic simulation and emulation according to different flight periods, the realization of real time system with different configurations, control of the development cycle and examples of application are presented in detail. On the basis of the satellite dynamic simulation technology, distributed network integrated with the component testing platforms is used to construct a multi-level bus network system. The system takes into full consideration the configuration flexibility, real time characteristics and extendibility. Test results show that both the software algorithm and the hardware integration of the system are correct and effective. The system could be used not only as the effective tool of designing and developing the components and whole assembly of satellites and missiles, but also for the dynamic simulation and emulation in all phases of a spacecraft development cycle.

Simulation of microstructures in solidification of aluminum twin-roll casting

Based on the research on the solidification of twin-roll continuous casting aluminum thin strip, the analytical model of heterogeneous nucleation, the growth kinetics of tip （KGT） and columnar dendrite transformation to equiaxed dendrite （CET） of twin-roll continuous casting aluminum thin strip solidification was established by means of the principle of metal solidification and modem computer emulational technology. Meantime, based on the cellular automaton, the emulational model of twin-roll continuous casting aluminum thin strip, solidification was established. The foundation for the emulational simulation of twin-roll casting thin strip solidification structure was laid. Meanwhile, the mathematical simulation feasibility was confirmed by using the solidification process of twin-roll continuous casting aluminum thin strip.

Reliability emulation of production system on longwall face

Based on the theory of random process and the characteristic of the functioning of a system component subject to a certain specific probability distribution, emulated the whole process of system production on Iongwall face was emulated, in which the methods of time pace and computer random emulation were adopted. The paper provides an objective basis for the analysis of a mining Iongwall face and the varied lines of effectiveness, machine stoppage rate and coal flow of components and system, and output etc.lt also offers some theories to improve productivity by discussing the application of the transformation plan and optimization of reasonable coal stock capacity, as well as selection of system equipment and matching optimization.

Numerical simulation and experimental research on air reverse circulation bit interior fluid territory

By using fluent fluid engineer emulator software to simulate negative pressure formed inside the injector added in the reverse-circulation sampling drilling bit, at six angles of 15, 30, 45, 60, 75 and 90 degrees. The pressure distributing nephogram and the corresponding numerical value gotten compared with the experiment data received by an injector with 6 angles designed by emulation the conclusion. It has been found that the two values are coincident essentially. The article shows that using emulator technology to design optimizely is credible and simple. The cost is low and the design cycle is short compared with the method through experience and test.