Aspects of the general Vlasov theory are examined separately as applied to a thin-walled channel section cantilever beam under free-end end loading. In particular, the flexural bending and shear that arise under trans...Aspects of the general Vlasov theory are examined separately as applied to a thin-walled channel section cantilever beam under free-end end loading. In particular, the flexural bending and shear that arise under transverse shear and axial torsional loading are each considered theoretically. These analyses involve the location of the shear centre at which transverse shear forces when applied do not produce torsion. This centre, when taken to be coincident with the centre of twist implies an equivalent reciprocal behaviour. That is, an axial torsion applied concentric with the shear centre will twist but not bend the beam. The respective bending and shear stress conversions are derived for each action applied to three aluminium alloy extruded channel sections mounted as cantilevers with a horizontal principal axis of symmetry. Bending and shear are considered more generally for other thin-walled sections when the transverse loading axes at the shear centre are not parallel to the section = s centroidal axes of principal second moments of area. The fixing at one end of the cantilever modifies the St Venant free angular twist and the free warping displacement. It is shown from the Wagner-Kappus torsion theory how the end constrained warping generates an axial stress distribution that varies with the length and across the cross-section for an axial torsion applied to the shear centre. It should be mentioned here for wider applications and validation of the Vlasov theory that attendant papers are to consider in detail bending and torsional loadings applied to other axes through each of the centroid and the web centre. Therein, both bending and twisting arise from transverse shear and axial torsion applied to each position being displaced from the shear centre. Here, the influence of the axis position upon the net axial and shear stress distributions is to be established. That is, the net axial stress from axial torsional loading is identified with the sum of axial stress due to bending and axial stress arising from constrained warping displacements at the fixing. The net shear stress distribution overlays the distributions from axial torsion and that from flexural shear under transverse loading. Both arise when transverse forces are displaced from the shear centre.展开更多
Given the conditions of residual coal from the boundary of a flat dipping open-pit mine,which uses strip areas mining and inner dumping with slope-covering,we propose an open-pit and underground integrated mining tech...Given the conditions of residual coal from the boundary of a flat dipping open-pit mine,which uses strip areas mining and inner dumping with slope-covering,we propose an open-pit and underground integrated mining technology for residual coal of end slopes.In the proposal a conveyance road and ventilation conveyance near the slope are built,corresponding to the pit mining area and the surface coal mine dump,as well as an interval haulage tunnel and air-inlet tunnel.The outcome shows that such mining method may reduce the effect to slope stability from underground mining,it does not affect the dumping advance and has a high recovery rate of residual coal resources.The working face is timbered by single hydraulic props,transported by a scraper conveyor and supported by coal walls.This method of mining is one of layered top coal caving,with high resource recovery,low production cost where positive economic benefit can be realized.展开更多
The attractions of cantilevers made of multiwalled carbon nanotubes（MWNTs） and secured on one end are studied in the non-uniform magnetic field of a permanent magnet. Under an optical microscope, the positions and t...The attractions of cantilevers made of multiwalled carbon nanotubes（MWNTs） and secured on one end are studied in the non-uniform magnetic field of a permanent magnet. Under an optical microscope, the positions and the corresponding deflections of the original cantilevers（with iron catalytic nanoparticles at the free end） and corresponding cut-off cantilevers（the free ends consisting of open ends of MWNTs） are studied. Both kinds of CNT cantilevers are found to be attracted by the magnet, and the point of application of force is proven to be at the tip of the cantilever. By measuring and comparing deflections between these two kinds of cantilevers, the magnetic moment at the open ends of the CNTs can be quantified.Due to the unexpectedly high value of the magnetic moment at the open ends of carbon nanotubes, it is called giant magnetic moment, and its possible mechanisms are proposed and discussed.展开更多
Natural convection in an open end cavity with a hot inclined wall is simulated based on the lattice Boltzmann method （LBM）. The physics of flow and energy transfer in open end cavities are addressed when the hot wal...Natural convection in an open end cavity with a hot inclined wall is simulated based on the lattice Boltzmann method （LBM）. The physics of flow and energy transfer in open end cavities are addressed when the hot wall is inclined. The combination of the two topics （open cavity and inclined walls） is the main novelty of the present study. The effects of the angle of the hot inclined wall on the flow field and heat transfer are thoroughly investigated. The Prandtl number is fixed to 0.71 （air）. The Rayleigh number and the angle of the hot inclined wall are varied in the range of 10^4 to 10^6 and 60° to 85°, respectively. The results are presented for two different aspect ratios, i.e., A = 1 and 2. The results obtained with the LBM are also compared with those of the finite volume method （FVM）. The predicted results of the LBM conform to those of the FVM. The results show that by increasing the angle of the hot inclined wall and the aspect ratio of the cavity, the average Nusselt number decreases. The trend of the local Nusselt number on the inclined wall is also discussed.展开更多
Amphiphilic copolymer of 5-benzyloxytrimethylene carbonate （BTMC） with poly （vinyl pyrrolidone） （PVP） was successfully synthesized using immobilized porcine pancreas lipase （IPPL） or SnOct2 as catalyst. Hydrox...Amphiphilic copolymer of 5-benzyloxytrimethylene carbonate （BTMC） with poly （vinyl pyrrolidone） （PVP） was successfully synthesized using immobilized porcine pancreas lipase （IPPL） or SnOct2 as catalyst. Hydroxyl terminated PVP, synthesized with 2-mercaptoethanol as a chain transfer reagent, was employed as a rnacroinitiator. The resulting copolymers were characterized by GPC, ^1H NMR and IR. Increasing the BTMC/PVP-OH feed ratio （[B]/[P]） resulted in the increase of Mn of corresponding copolymers and the decrease of Mw/Mn. Immobilized enzyme has comparable catalytic activity to SnOct2 for the copolymerization.展开更多
This paper explores the disposition effect, the tendency of investors to hold losing investments too long and sell winning investments too soon, by analyzing a unique data set that consists of the buying and selling p...This paper explores the disposition effect, the tendency of investors to hold losing investments too long and sell winning investments too soon, by analyzing a unique data set that consists of the buying and selling positions of open-end fund investors in China. Results show that investors' buying and selling behaviors are significantly affected by fund performance. The reasons that lie behind such results are mainly related to the non-persistence of fund performance. When fund performance is non-persistent, investors are not clear about the future returns on funds. So, investors, especially individual investors, would have to realize the profits on hand immediately. Meanwhile, fund investors are highly sensitive to fund age and loading fees, but not sensitive to management fees charged by funds when they buy or sell fund shares.展开更多
In this paper, we study complete open manifolds with nonnegative Ricci curvature and injectivity radius bounded from below. We find that this kind of manifolds are diffeomorphic to a Euclidean space when certain dista...In this paper, we study complete open manifolds with nonnegative Ricci curvature and injectivity radius bounded from below. We find that this kind of manifolds are diffeomorphic to a Euclidean space when certain distance functions satisfy a reasonable condition.展开更多
A new concept of spinning-open-end jet-spinning, which combines the advantages of the false twist jet spinning and open end winning, was proposed, and a device was designed to practice this concept. The property of th...A new concept of spinning-open-end jet-spinning, which combines the advantages of the false twist jet spinning and open end winning, was proposed, and a device was designed to practice this concept. The property of thc open-end jet spun yarn was measured and discussed in comparison with that of some other spun yarns.展开更多
During the installation of a pipe pile,the soil around the pile will be squeezed out. This paper deals with this squeezing effect of open-ended pipe piles using the cylindrical cavity expansion theory. The characteris...During the installation of a pipe pile,the soil around the pile will be squeezed out. This paper deals with this squeezing effect of open-ended pipe piles using the cylindrical cavity expansion theory. The characteristics of soil with different tension and compression moduli and dilation are involved by applying the elastic theory with different moduli and logarithmic strain. The closed-form solutions of the radius of the plastic region,the displacement of the boundary between the plastic region and the elastic region and the expansion pressure on the external surface of the pipe piles are obtained. When obtaining these solutions,the soil plug in the open-ended pipe pile is considered by employing an incremental filling ratio to quantify the degree of soil plugging. Moreover,the effects of the ratio of tension and compression moduli,angle of dilation and incremental filling ratio on the radius of the plastic region and the expansion pressure on the external surface of the pipe pile are investigated. The parametric analyses show that it is necessary and important to consider the difference between the tension modulus and compression modulus,dilation angle and incremental filling ratio for studying the squeezing effect of open-ended pipe pile installation. It is concluded that the analytical solutions presented in this paper are suitable for studying the squeezing effect of open-ended pipe piles.展开更多
Prostate cancer and its treatment have long-term implications for men’s lives. We aimed to describe the content, extent, and frequency of written comments to the open-ended question, “Further comments?” in the pati...Prostate cancer and its treatment have long-term implications for men’s lives. We aimed to describe the content, extent, and frequency of written comments to the open-ended question, “Further comments?” in the patient-reported outcome measures questionnaire. During the study period, 897 men participated;372 wrote 747 free-text comments in the questionnaire. These comments were analysed using qualitative content analysis and were grouped into four categories: 1) prostate cancer’s influence on health;2) clarifications of answers to the survey;3) descriptions of well-being despite the cancer;and 4) experiences of care and the need for contact with health care. The distribution of the comments shifted over time. The open-ended question not only allowed the participants to explain their other responses and describe important aspects of their lives during and after treatment, something not normally covered by a questionnaire, but it also indicated their experiences of health care services along the patients’ PC-trajectory. This further raises the issue of including an open-ended item in a forced-choice survey into the ethical realm to ensure that proper care is taken of participants’ answers and thoughts.展开更多
文摘Aspects of the general Vlasov theory are examined separately as applied to a thin-walled channel section cantilever beam under free-end end loading. In particular, the flexural bending and shear that arise under transverse shear and axial torsional loading are each considered theoretically. These analyses involve the location of the shear centre at which transverse shear forces when applied do not produce torsion. This centre, when taken to be coincident with the centre of twist implies an equivalent reciprocal behaviour. That is, an axial torsion applied concentric with the shear centre will twist but not bend the beam. The respective bending and shear stress conversions are derived for each action applied to three aluminium alloy extruded channel sections mounted as cantilevers with a horizontal principal axis of symmetry. Bending and shear are considered more generally for other thin-walled sections when the transverse loading axes at the shear centre are not parallel to the section = s centroidal axes of principal second moments of area. The fixing at one end of the cantilever modifies the St Venant free angular twist and the free warping displacement. It is shown from the Wagner-Kappus torsion theory how the end constrained warping generates an axial stress distribution that varies with the length and across the cross-section for an axial torsion applied to the shear centre. It should be mentioned here for wider applications and validation of the Vlasov theory that attendant papers are to consider in detail bending and torsional loadings applied to other axes through each of the centroid and the web centre. Therein, both bending and twisting arise from transverse shear and axial torsion applied to each position being displaced from the shear centre. Here, the influence of the axis position upon the net axial and shear stress distributions is to be established. That is, the net axial stress from axial torsional loading is identified with the sum of axial stress due to bending and axial stress arising from constrained warping displacements at the fixing. The net shear stress distribution overlays the distributions from axial torsion and that from flexural shear under transverse loading. Both arise when transverse forces are displaced from the shear centre.
文摘Given the conditions of residual coal from the boundary of a flat dipping open-pit mine,which uses strip areas mining and inner dumping with slope-covering,we propose an open-pit and underground integrated mining technology for residual coal of end slopes.In the proposal a conveyance road and ventilation conveyance near the slope are built,corresponding to the pit mining area and the surface coal mine dump,as well as an interval haulage tunnel and air-inlet tunnel.The outcome shows that such mining method may reduce the effect to slope stability from underground mining,it does not affect the dumping advance and has a high recovery rate of residual coal resources.The working face is timbered by single hydraulic props,transported by a scraper conveyor and supported by coal walls.This method of mining is one of layered top coal caving,with high resource recovery,low production cost where positive economic benefit can be realized.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.10774032 and 51472057)the Instrument Developing Project of the Chinese Academy of Sciences(Grant No.Y2010031)
文摘The attractions of cantilevers made of multiwalled carbon nanotubes（MWNTs） and secured on one end are studied in the non-uniform magnetic field of a permanent magnet. Under an optical microscope, the positions and the corresponding deflections of the original cantilevers（with iron catalytic nanoparticles at the free end） and corresponding cut-off cantilevers（the free ends consisting of open ends of MWNTs） are studied. Both kinds of CNT cantilevers are found to be attracted by the magnet, and the point of application of force is proven to be at the tip of the cantilever. By measuring and comparing deflections between these two kinds of cantilevers, the magnetic moment at the open ends of the CNTs can be quantified.Due to the unexpectedly high value of the magnetic moment at the open ends of carbon nanotubes, it is called giant magnetic moment, and its possible mechanisms are proposed and discussed.
文摘Natural convection in an open end cavity with a hot inclined wall is simulated based on the lattice Boltzmann method （LBM）. The physics of flow and energy transfer in open end cavities are addressed when the hot wall is inclined. The combination of the two topics （open cavity and inclined walls） is the main novelty of the present study. The effects of the angle of the hot inclined wall on the flow field and heat transfer are thoroughly investigated. The Prandtl number is fixed to 0.71 （air）. The Rayleigh number and the angle of the hot inclined wall are varied in the range of 10^4 to 10^6 and 60° to 85°, respectively. The results are presented for two different aspect ratios, i.e., A = 1 and 2. The results obtained with the LBM are also compared with those of the finite volume method （FVM）. The predicted results of the LBM conform to those of the FVM. The results show that by increasing the angle of the hot inclined wall and the aspect ratio of the cavity, the average Nusselt number decreases. The trend of the local Nusselt number on the inclined wall is also discussed.
基金the financial support of National Key Fundamental Research Program of China （Grant No. G1999064703） the National Natural Science Foundation of China （Grant No. 20104005）.
文摘Amphiphilic copolymer of 5-benzyloxytrimethylene carbonate （BTMC） with poly （vinyl pyrrolidone） （PVP） was successfully synthesized using immobilized porcine pancreas lipase （IPPL） or SnOct2 as catalyst. Hydroxyl terminated PVP, synthesized with 2-mercaptoethanol as a chain transfer reagent, was employed as a rnacroinitiator. The resulting copolymers were characterized by GPC, ^1H NMR and IR. Increasing the BTMC/PVP-OH feed ratio （[B]/[P]） resulted in the increase of Mn of corresponding copolymers and the decrease of Mw/Mn. Immobilized enzyme has comparable catalytic activity to SnOct2 for the copolymerization.
文摘This paper explores the disposition effect, the tendency of investors to hold losing investments too long and sell winning investments too soon, by analyzing a unique data set that consists of the buying and selling positions of open-end fund investors in China. Results show that investors' buying and selling behaviors are significantly affected by fund performance. The reasons that lie behind such results are mainly related to the non-persistence of fund performance. When fund performance is non-persistent, investors are not clear about the future returns on funds. So, investors, especially individual investors, would have to realize the profits on hand immediately. Meanwhile, fund investors are highly sensitive to fund age and loading fees, but not sensitive to management fees charged by funds when they buy or sell fund shares.
文摘In this paper, we study complete open manifolds with nonnegative Ricci curvature and injectivity radius bounded from below. We find that this kind of manifolds are diffeomorphic to a Euclidean space when certain distance functions satisfy a reasonable condition.
文摘A new concept of spinning-open-end jet-spinning, which combines the advantages of the false twist jet spinning and open end winning, was proposed, and a device was designed to practice this concept. The property of thc open-end jet spun yarn was measured and discussed in comparison with that of some other spun yarns.
文摘During the installation of a pipe pile,the soil around the pile will be squeezed out. This paper deals with this squeezing effect of open-ended pipe piles using the cylindrical cavity expansion theory. The characteristics of soil with different tension and compression moduli and dilation are involved by applying the elastic theory with different moduli and logarithmic strain. The closed-form solutions of the radius of the plastic region,the displacement of the boundary between the plastic region and the elastic region and the expansion pressure on the external surface of the pipe piles are obtained. When obtaining these solutions,the soil plug in the open-ended pipe pile is considered by employing an incremental filling ratio to quantify the degree of soil plugging. Moreover,the effects of the ratio of tension and compression moduli,angle of dilation and incremental filling ratio on the radius of the plastic region and the expansion pressure on the external surface of the pipe pile are investigated. The parametric analyses show that it is necessary and important to consider the difference between the tension modulus and compression modulus,dilation angle and incremental filling ratio for studying the squeezing effect of open-ended pipe pile installation. It is concluded that the analytical solutions presented in this paper are suitable for studying the squeezing effect of open-ended pipe piles.
文摘Prostate cancer and its treatment have long-term implications for men’s lives. We aimed to describe the content, extent, and frequency of written comments to the open-ended question, “Further comments?” in the patient-reported outcome measures questionnaire. During the study period, 897 men participated;372 wrote 747 free-text comments in the questionnaire. These comments were analysed using qualitative content analysis and were grouped into four categories: 1) prostate cancer’s influence on health;2) clarifications of answers to the survey;3) descriptions of well-being despite the cancer;and 4) experiences of care and the need for contact with health care. The distribution of the comments shifted over time. The open-ended question not only allowed the participants to explain their other responses and describe important aspects of their lives during and after treatment, something not normally covered by a questionnaire, but it also indicated their experiences of health care services along the patients’ PC-trajectory. This further raises the issue of including an open-ended item in a forced-choice survey into the ethical realm to ensure that proper care is taken of participants’ answers and thoughts.
