A hybrid energy transmission pipeline is proposed with the aim of long-distance cooperative transmission of electricity and chemical fuels, which is composed of an inner high-temperature superconducting (HTS) power ca...A hybrid energy transmission pipeline is proposed with the aim of long-distance cooperative transmission of electricity and chemical fuels, which is composed of an inner high-temperature superconducting (HTS) power cable and outer liquefied natural gas (LNG) pipeline. The flowing LNG could maintain the operating temperature of the inner HTS power cable within the range of 85 K-90 K, thus the Bi-2223 superconductors in the HTS power cable produce little Joule loss with the transmission current below the critical current. Owing to the advantages of high power density, low transmission losses and economical manufacturing costs, the hybrid energy transmission pipeline is expected to be widely utilized in the near future. In order to ensure the safety of the HTS power cable and explosive LNG in case of short-circuit faults, this paper tests and analyzes the characteristics of Bi-2223 HTS tapes of the Type HT-CA, Type HT-SS and Type H models under short-circuit current impacts at the LNG cooling temperature (85 K-90 K). An experimental platform is designed and established for the ampacity tests of HTS tapes above LN2 cooling temperature (77 K). The AC over-current impact tests at 85 K-90 K are carried out on each sample of Bi-2223 tapes respectively, and the experimental results are analyzed and compared to evaluate their performances under different operating conditions. The results indicate that the Type HT-CA tape can withstand 50 Hz short-circuit current impact with the amplitude of 1108 A (10 times of critical current Ic ) for 100 ms at 90 K, and its resistance is the smallest of the three tested samples under similar current impacts. Therefore, the Type HT-CA Bi-2223 tape is the optimal superconductor of the HTS power cable in the hybrid energy transmission pipeline.展开更多
Pipelines produce vibrations during fluid or gas transportation.These vibrations are less likely to cause structural failure as they exist with a small magnitude and can be harvested into useful energy.This paper pres...Pipelines produce vibrations during fluid or gas transportation.These vibrations are less likely to cause structural failure as they exist with a small magnitude and can be harvested into useful energy.This paper presents a study on the piezoelectric energy-harvesting method converting mechanical energy from pipeline vibration into electrical energy.The performance of the serpentine-shaped piezoelectric cantilever beam was observed to check whether the design can produce the highest output voltage within the allowable vibration region of the pipeline from 10 to 300 Hz through finite element analysis using COMSOL Multiphysics software(Supplementary Material).In addition,this study investigates the energy-harvesting potential of the proposed design under real pipeline vibration conditions through a lab vibration test.The harvested energy output is evaluated based on various vibration frequencies and amplitudes,which gives an idea of the device and its performance under different operating conditions.The experiment result shows that the energy harvester produced an open-circuit voltage of 10.28-15.45 V with 1 g of vibration acceleration.The results of this research will contribute to the development of efficient piezoelectric energy harvesters adapted for pipeline environments.展开更多
基金supported by National Key R&D Project under Grant(2018YFB0904400).
文摘A hybrid energy transmission pipeline is proposed with the aim of long-distance cooperative transmission of electricity and chemical fuels, which is composed of an inner high-temperature superconducting (HTS) power cable and outer liquefied natural gas (LNG) pipeline. The flowing LNG could maintain the operating temperature of the inner HTS power cable within the range of 85 K-90 K, thus the Bi-2223 superconductors in the HTS power cable produce little Joule loss with the transmission current below the critical current. Owing to the advantages of high power density, low transmission losses and economical manufacturing costs, the hybrid energy transmission pipeline is expected to be widely utilized in the near future. In order to ensure the safety of the HTS power cable and explosive LNG in case of short-circuit faults, this paper tests and analyzes the characteristics of Bi-2223 HTS tapes of the Type HT-CA, Type HT-SS and Type H models under short-circuit current impacts at the LNG cooling temperature (85 K-90 K). An experimental platform is designed and established for the ampacity tests of HTS tapes above LN2 cooling temperature (77 K). The AC over-current impact tests at 85 K-90 K are carried out on each sample of Bi-2223 tapes respectively, and the experimental results are analyzed and compared to evaluate their performances under different operating conditions. The results indicate that the Type HT-CA tape can withstand 50 Hz short-circuit current impact with the amplitude of 1108 A (10 times of critical current Ic ) for 100 ms at 90 K, and its resistance is the smallest of the three tested samples under similar current impacts. Therefore, the Type HT-CA Bi-2223 tape is the optimal superconductor of the HTS power cable in the hybrid energy transmission pipeline.
文摘Pipelines produce vibrations during fluid or gas transportation.These vibrations are less likely to cause structural failure as they exist with a small magnitude and can be harvested into useful energy.This paper presents a study on the piezoelectric energy-harvesting method converting mechanical energy from pipeline vibration into electrical energy.The performance of the serpentine-shaped piezoelectric cantilever beam was observed to check whether the design can produce the highest output voltage within the allowable vibration region of the pipeline from 10 to 300 Hz through finite element analysis using COMSOL Multiphysics software(Supplementary Material).In addition,this study investigates the energy-harvesting potential of the proposed design under real pipeline vibration conditions through a lab vibration test.The harvested energy output is evaluated based on various vibration frequencies and amplitudes,which gives an idea of the device and its performance under different operating conditions.The experiment result shows that the energy harvester produced an open-circuit voltage of 10.28-15.45 V with 1 g of vibration acceleration.The results of this research will contribute to the development of efficient piezoelectric energy harvesters adapted for pipeline environments.
