Study of the features of outburst caused by rock cross-cut coal uncovering and the law of gas dilatation energy release

To study the law of gas dilatation energy release of rock cross-cut coal uncovering face, according to the analysis of the physical parameters distribution features of coal and rock mass in front of crosscut face,the equations of elastic potential of coal and gas dilatation energy theory were set up to process a contrast calculation of the sizes of two kinds of energy. The results show that gas dilatation energy is the uppermost energy source causing outburst occurrence. Furthermore, the mathematical model of spherical flow field gas dilatation energy release was established and MATLAB software was applied to make a numerical calculation analysis on the law of gas dilatation energy release. The results indicate that the gas dilatation energy is closely related to gas parameters and its energy index does reflect the possibility of coal seam outburst.

Energy-limiting factor for coal and gas outburst occurrence in intact coal seam

This research reviewed the mechanics and gas desorption properties of intact coal,and tested the crushing work ratios of different intact coals,and then,studied the stress conditions for the failure or crushing of intact coal and the gas demand for the pulverization of intact coal particles.When a real-life outburst case is examined,the required minimum stress for intact coal outburst is estimated.The study concludes that the crushing work ratios of three intact coal samples vary from 294.3732 to 945.8048 J/m^(2).For the real-life case,more than 2300 MJ of transport work is needed,and 10062.09,7046.57 and 5895.47 m^(3) of gas is required when the gas pressure is 1,2 and 3 MPa,respectively.The crushing work exceeds the transport work and even reaches 13.96 times of the transport work.How to provide such an enormous crushing work is an energy-limiting factor for the outburst in intact coal.The strain energy is needed for the crushing work,and the required minimum stress is over 54.35 MPa,even reaching 300.44 MPa.These minimum stresses far exceed the in-situ vertical and horizontal stresses that can be provided at the 300–700 m mining depth range.

Comparing potentials for gas outburst in a Chinese anthracite and an Australian bituminous coal mine

Gas outbursts in underground mining occur under conditions of high gas desorption rate and gas content,combined with high stress regime, low coal strength and high Young's modulus. This combination of gas and stress factors occurs more often in deep mining. Hence, as the depth of mining increases, the potential for outburst increases. This study proposes a conceptual model to evaluate outburst potential in terms of an outburst indicator. The model was used to evaluate the potential for gas outburst in two mines, by comparing numerical simulations of gas flow behavior under typical stress regimes in an Australian gassy mine extracting a medium-volatile bituminous coal, and a Chinese gassy coal mine in Qinshui Basin(Shanxi province) extracting anthracite coal. We coupled the stress simulation program(FLAC3D) with the gas simulation program(SIMED II) to compute the stress and gas pressure and gas content distribution following development of a roadway into the targeted coal seams. The data from gas content and stress distribution were then used to quantify the intensity of energy release in the event of an outburst.

Experimental research into the effect of gas pressure,particle size and nozzle area on initial gas-release energy during gas desorption

Coal and gas outburst is a violent disaster driven by released energy from gas desorption.The initial expansion energy of released gas(IEERG)is a new method to predict coal and gas outburst.In this paper,an instrument for IEERG measurement was developed.Compared with previous setups,the new one which is equipped with three convergent nozzles and quick-release mechanism gets improved in data acquisition and gas sealing and releasing performance.To comprehensively know the effect of gas pressure,particle size,and nozzle area on IEERG,a series of experiments were carried out with this new setup.The variable control test results indicated that the gas pressure-IEERG curves remain the linear trend and the particle size-IEERG curves maintain the negative exponential trend for nozzle areas at 1.13,2.26,and3.39 mm2,respectively.The increase in nozzle area leads to deceases in value of IEERG and absolute value of slope of fitting curves in each test.In addition,the orthogonal experiment showed that the influence of gas pressure,nozzle area,and particle size on IEERG decreases in turn.Only gas pressure had a marked impact on IEERG.This work offers great importance in improving the accuracy of prediction of coal and gas outburst.

Fractal characteristics of surface crack evolution in the process of gas-containing coal extrusion

In this paper, simulated experiment device of coal and gas outburst was employed to perform the experiment on gas-containing coal extrusion. In the experiment, coal surface cracks were observed with a high-speed camera and then the images were processed by sketch. Based on the above description, the paper studied the fractal dimension values from different positions of coal surface as well as their changing laws with time. The results show that there is a growing parabola trend of crack dimension value in the process of coal extrusion. Accordingly, we drew the conclusion that extruded coal crack evolution is a process of fractal dimension value increase. On the basis of fractal dimension values taken from different parts of coal masses, a fractal dimension of the contour map was drawn. Thus, it is clear that the contour map involves different crack fractal dimension values from different positions. To be specific, where there are complicated force and violent movement in coal mass, there are higher fractal dimension values, i.e., the further the middle of observation surface is from the exit of coal mass, and the lower the fractal dimension value is. In line with fractal geometry and energy theory of coal and gas outburst, this study presents the relation between fractal dimension and energy in the process of extruding. In conclusion, the evolution of crack fractal dimension value can signify that of energy, which has laid a solid foundation for the quantification research on the mechanism of gas-containing coal extrusion.

Micro shape of coal particle and crushing energy

A large amount of energy is consumed in a coal and gas outburst since a mass of coal is pulverized and ejected, accompanying a great quantity of gas emitted, resulting in a major mining hazard in underground coal mining around the world. Understanding how potential energy stored in gassy coal seams dissipates in the process of outbursting may possibly be a key to clarify the mechanisms responsible for coal and gas outburst. The present study was aimed to evaluate energy for crushing coal to various size fractions in coal and gas outbursts through theoretical and experimental investigation into the shape of fine coal particles and their equivalent diameter. Theoretical analysis indicates that the shape of a particle has a significant impact both on its equivalent diameter and hence on its outer surface area.Microscopic observations demonstrate the particle fraction with diameters less than 0.075 mm, produced from crushing coal samples, mostly takes on a spherical or ellipsoidal shape, and experimental data also show this part of particles consists of 30%–50% surface area newly generated from crushing operation,though these fine coal accounts for only less than ten percentages by weight. Further, analysis of experimental data indicates that the total surface area of this particle size fraction varies exponentially with input crushing energy, and the specific area energy is not a constant but probably in association with physical properties and textures of material.

Features of gas geology and its main controlling factors in Pingxiang Mining Area, Jiangxi Province

Pingxiang Mining Area in Jiangxi Province is one of the major coal-producing areas and is prone to serious coal and gas outburst, therefore, it is of significance to research on gas geological features and its controlling factors. Based on the analysis of gas data collected from geological exploration and coal mining, the research reveals that the features of gas geology vary significantly between west part and east part of Pingxiang Mining Area, and it is characterized by high gas mines with se- rious coal and gas outburst in the west part and low gas mines with no coal and gas outburst in the east part. The main controlling factors to gas geology are discussed, and the great difference of gas geology between west part and east part is the result of comprehensive effect by geological factors. Concerning the gas generation, the coal rank in the west part is higher than that in the east part, which is favorable to generate more gas in the west part than in the east part. Concerning the gas preservation, the structures are characterized by gliding nappe in the west part and by tectonic window in the east part, the surrounding rocks are characterized by poor permeability in the west part and comparatively good permeability in the east part, and the characteristics of coal rank and coal body structure are favorable to gas preservation in the west part and favorable to gas emission in the east part.

湖南利民煤矿煤与瓦斯突出量级程度划分及其应用研究

根据煤与瓦斯突出的地质条件,对煤岩体系中的弹性潜能、瓦斯内能、采场附加应力积聚的能量分别进行了定性的划分,并结合弹性潜能、瓦斯内能,对煤与瓦斯突出的量级程度也尝试性地首次做出分类,并提高了原来的下限指标。对典型突出模式进行了简要地分析,为今后开展防治利民矿井煤与瓦斯突出工作提供了新的思路与对策。