Metal-modulated epitaxy of Mg-doped Al_(0.80)In_(0.20)N-based layer for application as the electron blocking layer in deep ultraviolet light-emitting diodes

This work reports the growth and characterization of p-AlInN layers doped with Mg by plasma-assisted molecular beam epitaxy(PAMBE).AlInN was grown with an Al molar fraction of 0.80 by metal-modulated epitaxy(MME)with a thickness of 180 nm on Si(111)substrates using AlN as buffer layers.Low substrate temperatures were used to enhance the incorporation of indium atoms into the alloy without clustering,as confirmed by X-ray diffraction(XRD).Cathodoluminescence measurements revealed ultraviolet(UV)range emissions.Meanwhile,Hall effect measurements indicated a maximum hole mobility of 146 cm^(2)/(V∙s),corresponding to a free hole concentration of 1.23×10^(19)cm^(−3).The samples were analyzed by X-ray photoelectron spectroscopy(XPS)estimating the alloy composition and extracting the Fermi level by valence band analysis.Mg-doped AlInN layers were studied for use as the electron-blocking layer(EBL)in LED structures.We varied the Al composition in the EBL from 0.84 to 0.96 molar fraction to assess its theoretical effects on electroluminescence,carrier concentration,and electric field,using SILVACO Atlas.The results from this study highlight the importance and capability of producing high-quality Mg-doped p-AlInN layers through PAMBE.Our simulations suggest that an Al content of 0.86 is optimal for achieving desired outcomes in electroluminescence,carrier concentration,and electric field.

Development of in situ characterization techniques in molecular beam epitaxy

Ex situ characterization techniques in molecular beam epitaxy(MBE)have inherent limitations,such as being prone to sample contamination and unstable surfaces during sample transfer from the MBE chamber.In recent years,the need for improved accuracy and reliability in measurement has driven the increasing adoption of in situ characterization techniques.These techniques,such as reflection high-energy electron diffraction,scanning tunneling microscopy,and X-ray photoelectron spectroscopy,allow direct observation of film growth processes in real time without exposing the sample to air,hence offering insights into the growth mechanisms of epitaxial films with controlled properties.By combining multiple in situ characterization techniques with MBE,researchers can better understand film growth processes,realizing novel materials with customized properties and extensive applications.This review aims to overview the benefits and achievements of in situ characterization techniques in MBE and their applications for material science research.In addition,through further analysis of these techniques regarding their challenges and potential solutions,particularly highlighting the assistance of machine learning to correlate in situ characterization with other material information,we hope to provide a guideline for future efforts in the development of novel monitoring and control schemes for MBE growth processes with improved material properties.

Electrical properties and structural optimization of GaN/InGaN/GaN tunnel junctions grown by molecular beam epitaxy

The InGaN films and GaN/InGaN/GaN tunnel junctions(TJs)were grown on GaN templates with plasma-assisted molecular beam epitaxy.As the In content increases,the quality of InGaN films grown on GaN templates decreases and the surface roughness of the samples increases.V-pits and trench defects were not found in the AFM images.p++-GaN/InGaN/n++-GaN TJs were investigated for various In content,InGaN thicknesses and doping concentration in the InGaN insert layer.The InGaN insert layer can promote good interband tunneling in GaN/InGaN/GaN TJ and significantly reduce operating voltage when doping is sufficiently high.The current density increases with increasing In content for the 3 nm InGaN insert layer,which is achieved by reducing the depletion zone width and the height of the potential barrier.At a forward current density of 500 A/cm^(2),the measured voltage was 4.31 V and the differential resistance was measured to be 3.75×10^(−3)Ω·cm^(2)for the device with a 3 nm p++-In_(0.35)Ga_(0.65)N insert layer.When the thickness of the In_(0.35)Ga_(0.65)N layer is closer to the“balanced”thickness,the TJ current density is higher.If the thickness is too high or too low,the width of the depletion zone will increase and the current density will decrease.The undoped InGaN layer has a better performance than n-type doping in the TJ.Polarization-engineered tunnel junctions can enhance the functionality and performance of electronic and optoelectronic devices.

Rapid epitaxy of 2-inch and high-quality α-Ga_(2)O_(3) films by mist-CVD method

High thickness uniformity and large-scale films of α-Ga_(2)O_(3) are crucial factors for the development of power devices.In this work, a high-quality 2-inch α-Ga_(2)O_(3) epitaxial film on c-plane sapphire substrates was prepared by the mist-CVD method.The growth rate and phase control mechanisms were systematically investigated. The growth rate of the α-Ga_(2)O_(3) films was limited by the evaporation of the microdroplets containing gallium acetylacetonate. By adjusting the substrate position(z) from 80 to 50 mm, the growth rate was increased from 307 nm/h to 1.45 μm/h when the growth temperature was fixed at 520 °C.When the growth temperature exceeded 560 °C, ε-Ga_(2)O_(3) was observed to form at the edges of 2-inch sapphire substrate.Phase control was achieved by adjusting the growth temperature. When the growth temperature was 540 °C and the substrate position was 50 mm, the full-width at half maximum(FWHM) of the rocking curves for the(0006) and(10-14) planes were 0.023° and 1.17°. The screw and edge dislocations were 2.3 × 10~6 and 3.9 × 10~(10)cm~(-2), respectively. Furthermore, the bandgaps and optical transmittance of α-Ga_(2)O_(3) films grown under different conditions were characterized utilizing UV-visible and near-IR scanning spectra.

A first-principles study on remote van der Waals epitaxy through a graphene monolayer on semiconductor substrates

To investigate the mechanism of remote epitaxy, where the overlayer can follow the same crystalline structure as the underlying semiconductor substrate through a thin two-dimensional interlayer, we systematically study the potential fluctuations of graphene covered Si, Ga As, and Ga N substrates from first-principles. We find that the uneven semiconductor surface, the distorted graphene, and the non-uniform interface charge transfer make significant contributions to the potential fluctuation. The semiconductor substrate with different surface reconstructions and orientations will generate different potential fluctuations through the graphene interlayer. We also calculate and compare the adsorption of adatoms on graphene covered substrates. The adsorption energies of adatoms not only depend on their distances to the underlying semiconductor surface, but are also sensitive to the direction of the charge transfer at the graphene/substrate interface. Changing the semiconductor reconstruction or orientation could even reverse the order of the adsorption energies of cation and anion adatoms by reversing the interface charge transfer direction, leading to a change in the growth orientation of the overlayer.Our study improves the understanding of the mechanism of remote epitaxy, and reveals that it is possible to control the initial nucleation and orientation of overlayers by changing the semiconductor reconstructions and/or orientations in remote epitaxy.

Multiple SiGe/Si layers epitaxy and SiGe selective etching for vertically stacked DRAM

Fifteen periods of Si/Si_(0.7)Ge_(0.3)multilayers(MLs)with various Si Ge thicknesses are grown on a 200 mm Si substrate using reduced pressure chemical vapor deposition(RPCVD).Several methods were utilized to characterize and analyze the ML structures.The high resolution transmission electron microscopy(HRTEM)results show that the ML structure with 20 nm Si_(0.7)Ge_(0.3)features the best crystal quality and no defects are observed.Stacked Si_(0.7)Ge_(0.3)ML structures etched by three different methods were carried out and compared,and the results show that they have different selectivities and morphologies.In this work,the fabrication process influences on Si/Si Ge MLs are studied and there are no significant effects on the Si layers,which are the channels in lateral gate all around field effect transistor(L-GAAFET)devices.For vertically-stacked dynamic random access memory(VS-DRAM),it is necessary to consider the dislocation caused by strain accumulation and stress release after the number of stacked layers exceeds the critical thickness.These results pave the way for the manufacture of high-performance multivertical-stacked Si nanowires,nanosheet L-GAAFETs,and DRAM devices.

Evolution of microstructure, stress and dislocation of AlN thick film on nanopatterned sapphire substrates by hydride vapor phase epitaxy

A crack-free AlN film with 4.5 μm thickness was grown on a 2-inch hole-type nano-patterned sapphire substrates(NPSSs) by hydride vapor phase epitaxy(HVPE). The coalescence, stress evolution, and dislocation annihilation mechanisms in the AlN layer have been investigated. The large voids located on the pattern region were caused by the undesirable parasitic crystallites grown on the sidewalls of the nano-pattern in the early growth stage. The coalescence of the c-plane AlN was hindered by these three-fold crystallites and the special triangle void appeared. The cross-sectional Raman line scan was used to characterize the change of stress with film thickness, which corresponds to the characteristics of different growth stages of AlN. Threading dislocations(TDs) mainly originate from the boundary between misaligned crystallites and the c-plane AlN and the coalescence of two adjacent c-plane AlN crystals, rather than the interface between sapphire and AlN.

Strain compensated type Ⅱ superlattices grown by molecular beam epitaxy

We investigate a strain compensation method for the growth of complex interband cascade laser structures. For thick In As/Al Sb superlattice clad layers, the sublayer thicknesses were adjusted so that the tensile strain energy in the In As sublayer was equal to the compressive strain energy in the Al Sb sublayer. For the four-constituent active region, as the compressive strain in the Ga0.65In0.35Sb alloy layer was large, a tensile strain was incorporated in the chirped In As/Al Sb superlattice region for strain compensation to the Ga0.65In0.35Sb alloy. A laser structure of thickness 6 μm was grown on the Ga Sb substrate by molecular beam epitaxy. The wafer exhibited good surface morphology and high crystalline quality.

Gradual variation method for thick GaN heteroepitaxy by hydride vapour phase epitaxy

Two strain-state samples of GaN, labelled the strain-relief sample and the quality-improved sample, were grown by hydride vapour phase epitaxy （HVPE）, and then characterized by high-resolution X-ray diffraction, photoluminescence and optical microscopy. Two strain states of GaN in HVPE, like 3D and 2[） growth modes in metal-organic chemical vapour deposition （MOCVD）, provide an effective way to solve the heteroepitaxial problems of both strain relief and quality improvement. The gradual variation metbod （GVM）, developed based on the two strain states, is characterized by growth parameters＇ gradual variation alternating between the strain-relief growth conditions and the quality-improved growth conditions. In GVM, the introduction of the strain-relief amplitude, which is defined by the range from the quality-improved growth conditions to the strain-relief growth conditions, makes the strain-relief control concise and effective. The 300-μm thick bright and crack-free GaN film grown on a two-inch sapphire proves the effectiveness of GVM.

GaN substrate and GaN homo-epitaxy for LEDs:Progress and challenges

After a brief review on the progresses in GaN substrates by ammonothermal method and Na-flux method and hydride vapor phase epitaxy （HVPE） technology, our research results of growing GaN thick layer by a gas fow-rnodulated HVPE, removing the GaN layer through an efficient self-separation process from sapphire substrate, and modifying the uniformity of multiple wafer growth are presented. The effects of surface morphology and defect behaviors on the GaN homo-epitaxial growth on free standing substrate are also discussed, and followed by the advances of LEDs on GaN substrates and prospects of their applications in solid state lighting.

Heteroepitaxy of semiconductor thin films

The heteroepitaxy of semiconductor thin films is a cornerstone of semiconductor devices and is naturally preferred to grow on matched substrates from the view point of material epitaxy. However, the heteroepitaxy is always performed on mismatched substrates due to the limited choices of mature substrates, which constrains the quality of semiconductor thin films.

Application of halide vapor phase epitaxy for the growth of ultrawide band gap Ga_2O_3

Halide vapor phase epitaxy(HVPE) is widely used in the semiconductor industry for the growth of Si, GaAs, GaN, etc.HVPE is a non-organic chemical vapor deposition(CVD) technique, characterized by high quality growth of epitaxial layers with fast growth rate, which is versatile for the fabrication of both substrates and devices with wide applications. In this paper, we review the usage of HVPE for the growth and device applications of Ga_2O_3, with detailed discussions on a variety of technological aspects of HVPE. It is concluded that HVPE is a promising candidate for the epitaxy of large-area Ga_2O_3 substrates and for the fabrication of high power β-Ga_2O_3 devices.

Distribution of carriers in gradient-doping transmission-mode GaAs photocathodes grown by molecular beam epitaxy

The gradient-doping structure is first applied to prepare the transmission-mode GaAs photocathode and the integral sensitivity of the sealed image tube achieves 1420μA/lm. This paper studies the inner carrier concentration distribution of the gradient-doping transmission-mode GaAs photocathode after molecular beam epitaxy （MBE） growth using the electrochemical capacitance-voltage profiling. The results show that an ideal gradient-doping structure can be obtained by using MBE growth. The total band-bending energy in the gradient-doping GaAs active-layer with doping concentration ranging from 1×10^19 cm-3 to 1×1018 cm-3 is calculated to be 46.3 meV, which helps to improve the photoexcited electrons movement toward surface for the thin epilayer. In addition,by analysis of the band offsets, it is found that the worse carrier concentration discrepancy between GaAs and GaA1As causes a lower back interface electron potential barrier which decreases the amount of high-energy photoelectrons and affects the short-wave response.

Hydride vapor phase epitaxy for gallium nitride substrate

Due to the remarkable growth rate compared to another growth methods for gallium nitride(GaN)growth,hydride vapor phase epitaxy(HVPE)is now the only method for mass product GaN substrates.In this review,commercial HVPE systems and the GaN crystals grown by them are demonstrated.This article also illustrates some innovative attempts to develop homebuilt HVPE systems.Finally,the prospects for the further development of HVPE for GaN crystal growth in the future are also discussed.

Growth and characteristics of InAsSb epilayers with a cutoff wavelength of 4.8 μm prepared by one-step liquid phase epitaxy

InAsSb epilayers with a cutoff wavelength of 4.8 μm have been successfully grown on InAs substrates by one-step liquid phase epitaxy （LPE） technology. The epilayers were characterized by X-ray diffraction （XRD）, Fourier transform infrared （PTIR） transmittance measurements and scanning electron microscopy （SEM）. The influence of different growth conditions on the optical and structural properties of the materials was studied. The results revealed that the good crystalline quality, mirror smooth surface and flat interface of InAsSb epilayers were achieved. They benefited from optimized growth conditions, i.e., sufficient homogeneity of the growth melt and a very slow cooling rate.

Highly active and sintering-resistant heteroepitaxy of Au nanoparticles on ZnO nanowires for CO oxidation

Gold was supported on commercial ZnO powders(P) and homemade ZnO nanowires(NWs) by a modified deposition–precipitation method. X-ray diffraction and transmission electron microscopy investigation indicated that the size of the Au nanoparticles(NPs) depended strongly on the calcination temperature.The Au NPs were highly dispersed(< 5 nm) on both supports with calcination temperatures < 400 °C.However, after calcination at 600 °C the Au NPs aggregated much more severely on ZnO P than on ZnO NWs. Gold NPs epitaxially grew into the {10–10} facets of the ZnO NWs after calcination at temperatures > 400 °C. Such unique anchoring mechanism accounts for the much better experimentally observed sintering resistance. X-ray photoelectron spectra showed that Au existed as both metallic Au0 and Auδ+species in all the synthesized catalysts with or without calcination treatment; the ratios of Auδ+/Au0,however, varied, depending on the treatment conditions. Catalytic tests showed that the activity for CO oxidation strongly depended on the size of the Au NPs. After calcination at 600 °C, the specific rate for CO oxidation at room temperature decreased about 30 times on Au/ZnO P but only about 4 times on Au/ZnO NW. Stability tests demonstrated that the Au/ZnO NW catalysts had better stability for CO oxidation.

Molecular Beam Epitaxy of Zero Lattice-Mismatch InAs/GaSb Type-Ⅱ Superlattice

Type-Ⅱ InAs/GaSb superlattiees made of 13 InAs monolayers （MLs） and 7 GaSb MLs are grown on GaSb substrates by solid source molecular beam epitaxy. To obtain lattice-matched structures, thin InSb layers are inserted between InAs and GaSb layers. We complete a series of experiments to investigate the influence of the InSb deposition time, Ⅴ/Ⅲ beam-equivalent pressure ratio and interruption time between each layer, and then characterize the superlattice （SL） structures with high-resolution x-ray diffraction and atomic force microscopy. The optimized growth parameters are applied to grow the 100-period SL structure, resulting in the full-width half-maximum of 29.55 arcsee for the first SL satellite peak and zero lattice-mismatch between the zero-order SL peak and the GaSb substrate peak.

Liquid phase epitaxy magnetic garnet films and their applications

Liquid phase epitaxy （LPE） is a mature technology. Early experiments on single magnetic crystal films fabricated by LPE were focused mainly on thick films for microwave and magneto-optical devices. The LPE is an excellent way to make a thick film, low damping magnetic garnet film and high-quality magneto-optical material. Today, the principal challenge in the applied material is to create sub-micrometer devices by using modern photolithography technique. Until now the magnetic garnet films fabricated by LPE still show the best quality even on a nanoscale （about 100 nm）, which was considered to be impossible for LPE method.

Fabricating Buffer Layers for YBa_2Cu_3O_y Coated Conductor by Surface Oxidation Epitaxy

NiO buffer layers were formed on a tape of Ni for making YBCO coated conductor by surface-oxidation epitaxy （SOE） process. Different oxidizing conditions such as temperature and duration were studied for Ni tapes. It is found that the texture of NiO could be affected directly by the orientation and surface of substrate. X-ray diffraction （XRD） 2-2θ scan, φ-scan, and pole figure were employed to characterize the in-plane alignment and cube texture. X-ray φ-scan shows that NiO film is formed on Ni tape with high cube texture and a typical value at the full width at half maximum （FWHM） is ≤ 7.5°. Scanning electron microscopy was used to study the surface morphology of NiO films. No crack is found and the films appear dense. Such technique is simple and of low cost with perfect reproducibility, promising for developing long tapes.

Comparison of blue–green response between transmission-mode GaAsP-and GaAs-based photocathodes grown by molecular beam epitaxy

In order to develop the photodetector for effective blue-green response, the 18-mm-diameter vacuum image tube combined with the transmission-mode Alo.7Gao.3Aso.9Po.1/GaAso.9Po.1 photocathode grown by molecular beam epitaxy is tentatively fabricated. A comparison of photoelectric property, spectral characteristic and performance parameter be- tween the transmission-mode GaAsP-based and blue-extended GaAs-based photocathodes shows that the GaAsP-based photocathode possesses better absorption and higher quantum efficiency in the blue-green waveband, combined with a larger surface electron escape probability. Especially, the quantum efficiency at 532 nm for the GaAsP-based photocathode achieves as high as 59%, nearly twice that for the blue-extended GaAs-based one, which would be more conducive to the underwater range-gated imaging based on laser illumination. Moreover, the simulation results show that the favorable blue-green response can be achieved by optimizing the emission-layer thickness in a range of 0.4 μm-0.6 μm.