Impact of Initial Soil Conditions on Soil Hydrothermal and Surface Energy Fluxes in the Permafrost Region of the Tibetan Plateau

Accurate initial soil conditions play a crucial role in simulating soil hydrothermal and surface energy fluxes in land surface process modeling.This study emphasized the influence of the initial soil temperature(ST)and soil moisture(SM)conditions on a land surface energy and water simulation in the permafrost region in the Tibetan Plateau(TP)using the Community Land Model version 5.0(CLM5.0).The results indicate that the default initial schemes for ST and SM in CLM5.0 were simplistic,and inaccurately represented the soil characteristics of permafrost in the TP which led to underestimating ST during the freezing period while overestimating ST and underestimating SLW during the thawing period at the XDT site.Applying the long-term spin-up method to obtain initial soil conditions has only led to limited improvement in simulating soil hydrothermal and surface energy fluxes.The modified initial soil schemes proposed in this study comprehensively incorporate the characteristics of permafrost,which coexists with soil liquid water(SLW),and soil ice(SI)when the ST is below freezing temperature,effectively enhancing the accuracy of the simulated soil hydrothermal and surface energy fluxes.Consequently,the modified initial soil schemes greatly improved upon the results achieved through the long-term spin-up method.Three modified initial soil schemes experiments resulted in a 64%,88%,and 77%reduction in the average mean bias error(MBE)of ST,and a 13%,21%,and 19%reduction in the average root-mean-square error(RMSE)of SLW compared to the default simulation results.Also,the average MBE of net radiation was reduced by 7%,22%,and 21%.

Impact of Cattaneo-Christov Heat Flux in the Nanofluid Flow over an Inclined Permeable Surface with Irreversibility Analysis

This study discusses the magnetohydrodynamic nanofluid flow over an inclined permeable surface influenced by mixed convection, and Cattaeo-Christov heat flux. The heat transfer analysis is performed in the presence of a heat source/sink and thermal stratification. To gauge the energy loss during the process, an irreversibility analysis is also performed. A numerical solution to the envisaged problem is obtained using the bvp4c package of MATLAB. Graphs are drawn to assess the consequences of the arising parameters against the associated profiles. The results show that an augmentation in the magnetic field and nanomaterial volume fraction results in an enhancement in the temperature profile. A strong magnetic field can significantly reduce the fluid velocity. The behavior of the Skin friction coefficient against the different estimates of emerging parameters is discussed. .

Evaluating Parameterizations for Turbulent Fluxes over the Landfast Sea-Ice Surface in Prydz Bay, Antarctica

It is crucial to appropriately determine turbulent fluxes in numerical models.Using data collected in East Antarctica from 8 April to 26 November 2016,this study evaluates parameterization schemes for turbulent fluxes over the landfast seaice surface in five numerical models.The Community Noah Land Surface Model with Multi-Parameterizations Options(Noah_mp)best replicates the turbulent momentum flux,while the Beijing Climate System Model(BCC_CSM)produces the optimum sensible and latent heat fluxes.In particular,two critical issues of parameterization schemes,stability functions and roughness lengths,are investigated.Sensitivity tests indicate that roughness lengths play a decisive role in model performance.Based on the observed turbulent fluxes,roughness lengths over the landfast sea-ice surface are calculated.The results,which can provide a basis for setting up model parameters,reveal that the dynamic roughness length(z0m)increases with the increase of frictional velocity(u*)when u*≤0.4 m s^(−1) and fluctuates around 10^(−3 )m when u*>0.4 m s^(−1);thermal roughness length(z0t)is linearly related to the temperature gradient between air and sea-ice surface(ΔT)with a relation of lg(z0t)=−0.29ΔT−3.86;and the mean water vapor roughness length(z0q)in the specific humidity gradient(Δq)range ofΔq≤−0.6 g kg^(−1) is 10^(−6) m,3.5 times smaller than that in the range ofΔq˃−0.6 g kg^(−1).

Seasonal Variability of the Yellow Sea/East China Sea Surface Fluxes and Thermohaline Structure

We use the U.S. Navy's Master Oceanographic Observation Data Set (MOODS) forthe Yellow Sea/ East China Sea (YES) to investigate the climatological water mass features and theseasonal and non-seasonal variabilities of the thermohaline structure, and use the ComprehensiveOcean-Atmosphere Data Set (COADS) from 1945 to 1989 to investigate the linkage between the fluxes(momentum, heat, and moisture) across the air-ocean interface and the formation of the water massfeatures. After examining the major current systems and considering the local bathymetry and watermass properties, we divide YES into five regions: East China Sea (ECS) shelf, Yellow Sea (YS) Basin,Cheju bifurcation (CB) zone, Taiwan Warm Current (TWC) region, Kuroshio Current (KC) region. Thelong term mean surface heat balance corresponds to a heat loss of 30 W m^(-2) in the ESC and CBregions, a heat loss of 65 W m^(-2) in the KC and TWC regions, and a heat gain of 15 W m^(-2) in theYS region. The surface freshwater balance is defined by precipitation minus evaporation. The annualwater loss from the surface for the five subareas ranges from 1.8 to 4 cm month^(-1). The freshwater loss from the surface should be compensated for from the river run-off. The entire watercolumn of the shelf region (ECS, YS, and CB) undergoes an evident seasonal thermal cycle withmaximum values of temperature during summer and maximum mixed layer depths during winter. However,only the surface waters of the TWC and KC regions exhibit a seasonal thermal cycle.. We also foundtwo different relations between surface salinity and the Yangtze River run-off, namely, out-of-phasein the East China Sea shelf and in-phase in the Yellow Sea. This may confirm an earlier study thatthe summer fresh water discharge from the Yangtze River forms a relatively shallow, low salinityplume-like structure extending offshore on average towards the northeast.

Effects of Surface Flux Parameterization on the Numerically Simulated Intensity and Structure of Typhoon Morakot(2009)

The effects of surface flux parameterizations on tropical cyclone（TC） intensity and structure are investigated using the Advanced Research Weather Research and Forecasting（WRF-ARW） modeling system with high-resolution simulations of Typhoon Morakot（2009）.Numerical experiments are designed to simulate Typhoon Morakot（2009） with different formulations of surface exchange coefficients for enthalpy（C_K） and momentum（C_D） transfers,including those from recent observational studies based on in situ aircraft data collected in Atlantic hurricanes.The results show that the simulated intensity and structure are sensitive to C_K and C_D,but the simulated track is not.Consistent with previous studies,the simulated storm intensity is found to be more sensitive to the ratio of C_K/C_D than to C_K or C_D alone.The pressure-wind relationship is also found to be influenced by the exchange coefficients,consistent with recent numerical studies.This paper emphasizes the importance of C_D and C_K on TC structure simulations.The results suggest that C_D and C_K have a large impact on surface wind and flux distributions,boundary layer heights,the warm core,and precipitation.Compared to available observations,the experiment with observed C_D and C_K generally simulated better intensity and structure than the other experiments,especially over the ocean.The reasons for the structural differences among the experiments with different C_D and C_K setups are discussed in the context of TC dynamics and thermodynamics.

Parameterization of Heat Fluxes at Heterogeneous Surfaces by Integrating Satellite Measurements with Surface Layer and Atmospheric Boundary Layer Observations

The regional heat flux exchange between heterogeneous landscapes and the nearby surface layer （SL） is a key issue in the study of land-atmosphere interactions over arid areas such as the Heihe River basin in northwestern China and in high elevation areas such as the Tibetan Plateau. Based on analysis of the land surface heterogeneity and its effects on the overlying air flow, the use of SL observations, atmospheric boundary layer （ABL） observations, and satellite remote sensing （RS） measurements along with three parameterization methodologies （here, termed as the RS, tile, and blending approaches） have been proposed to estimate the surface heat flux densities over heterogeneous landscapes. The tile and blending approaches have also been implemented during HEIhe basin Field Experiment （HEIFE）, the Coordinated Enhanced Observing Period （CEOP） Asia-Australia Monsoon Project on the Tibetan Plateau （CAMP/Tibet）, the Arid Environment Comprehensive Monitoring Plan ＇95 （AECMP＇95）, and the DunHuang Experiment （DHEX）. The results showed that these two proposed parameterization methodologies can be accurately used over heterogeneous land surfaces.

CFD model simulation of bubble surface area flux in flotation column reactor in presence of minerals

Bubble surface area flux(S_b) is one of the main design parameter in flotation column that typically employed to describe the gas dispersion properties, and it has a strong correlation with the flotation rate constant. There is a limited information available in the literature regarding the effect of particle type,density, wettability and concentration on Sb. In this paper, computational fluid dynamics(CFD) simulations are performed to study the gas–liquid–solid three-phase flow dynamics in flotation column by employing the Eulerian–Eulerian formulation with k-e turbulence model. The model is developed by writing Fortran subroutine and incorporating then into the commercial CFD code AVL FIRE, v.2014.This paper studies the effects of superficial gas velocities and particle type, density, wettability and concentration on Sband bubble concentration in the flotation column. The model has been validated against published experimental data. It was found that the CFD model was able to predict, where the response variable as indicated by R-Square value of 0.98. These results suggest that the developed CFD model is reasonable to describe the flotation column reactor. From the CFD results, it is also found that Sb decreased with increasing solid concentration and hydrophobicity, but increased with increasing superficial gas velocity. For example, approximately 28% reduction in the surface area flux is observed when coal concentration is increased from 0 to 10%, by volume. While for the same solid concentration and gas flow rate, the bubble surface area flux is approximately increased by 7% in the presences of sphalerite.A possible explanation for this might be that increasing solid concentration and hydrophobicity promotes the bubble coalescence rate leading to the increase in bubble size. Also, it was found that the bubble concentration would decrease with addition of hydrophobic particle(i.e., coal). For instance, under the same operating conditions, approximately 23% reduction in the bubble concentration is predicted when the system was working with hydrophobic particles. The results presented are useful for understanding flow dynamics of three-phase system and provide a basis for further development of CFD model for flotation column.

An Assessment of the Quality of Surface Sensible Heat Flux Derived from Reanalysis Data through Comparison with Station Observations in Northwest China

The present study compares seasonal and interdecadal variations in surface sensible heat flux over Northwest China between station observations and ERA-40 and NCEP-NCAR reanalysis data for the period 1960-2000. While the seasonal variation in sensible heat flux is found to be consistent between station observations and the two reanalysis datasets, both land-air temperatures difference and surface wind speed show remarkable systematic differences. The sensible heat flux displays obvious interdecadal variability that is season-dependent. In the ERA-40 data, the sensible heat flux in spring, fall, and winter shows interdecadal variations that are similar to observations. In the NCEP-NCAR reanalysis data, sensible heat flux variations are inconsistent with and sometimes even opposite to observations. While surface wind speeds from the NCEP-NCAR reanalysis data show interdecadal changes consistent with station observations, variations in land-air temperature difference differ greatly from the observed dataset. In terms of land-air temperature difference and surface wind speed, almost no consistency with observations can be identified in the ERA-40 data, apart from the land-air temperature difference in fall and winter. These inconsistencies pose a major obstacle to the application in climate studies of surface sensible heat flux derived from reanalysis data.

Estimation of ground heat flux and its impact on the surface energy budget for a semi-arid grassland

Three approaches, i.e., the harmonic analysis （HA） technique, the thermal diffusion equation and correction （TDEC） method, and the calorimetric method used to estimate ground heat flux, are evaluated by using observations from the Semi-Arid Climate and Environment Observatory of Lanzhou University （SACOL） in July, 2008. The calorimetric method, which involves soil heat flux measurement with an HFP01SC self-calibrating heat flux plate buried at a depth of 5 cm and heat storage in the soil between the plate and the surface, is here called the ITHP approach. The results show good linear relationships between the soil heat fluxes measured with the HFP01SC heat flux plate and those calculated with the HA technique and the TDEC method, respectively, at a depth of 5 cm. The soil heat fluxes calculated with the latter two methods well follow the phase measured with the HFP01SC heat flux plate. The magnitudes of the soil heat flux calculated with the HA technique and the TDEC method are close to each other, and they are about 2 percent and 6 percent larger than the measured soil heat flux, respectively, which mainly occur during the nighttime. Moreover, the ground heat fluxes calculated with the TDEC method and the HA technique are highly correlated with each other （R2= 0.97）, and their difference is only about 1 percent. The TDEC-calculated ground heat flux also has a good linear relationship with the ITttP-calculated ground heat flux （R2 = 0.99）, but their difference is larger （about 9 percent）. Furthermore, compared to the HFP01SC direct measurements at a depth of 5 cm, the ground heat flux calculated with the HA technique, the TDEC method, and the ITHP approach can improve the surface energy budget closure by about 6 percent, 7 percent, and 6 percent at SACOL site, respectively. Therefore, the contribution of ground heat flux to the surface energy budget is very important for the semi-arid grassland over the Loess Plateau in China. Using turbulent heat fluxes with common corrections, soil heat storage between the surface and the heat flux plate can improve the surface energy budget closure by about 6 to 7 percent, resulting in a closure of 82 to 83 percent at the SACOL site.

YAG laser welding with surface activating flux

YAG laser welding with surface activating flux has been investigated, and the influencing factors and mechanism are discussed. The results show that both surface activating flux and surface active element S have fantastic effects on the YAG laser weld shape, that is to obviously increase the weld penetration and D/W ratio in various welding conditions. The mechanism is thought to be the change of weld pool surface tension temperature coefficient, thus, the change of fluid flow pattern in weld pool due to the flux.

Effects of Crop Growth and Development on Land Surface Fluxes

In this study, the Crop Estimation through Resource and Environment Synthesis model （CERES3.0） was coupled into the Biosphere-Atmosphere Transfer Scheme （BATS）, which is called BATS CERES, to represent interactions between the land surface and crop growth processes. The effects of crop growth and development on land surface processes were then studied based on numerical simulations using the land surface models. Six sensitivity experiments by BATS show that the land surface fluxes underwent substantial changes when the leaf area index was changed from 0 to 6 m2 m-2. Numerical experiments for Yucheng and Taoyuan stations reveal that the coupled model could capture not only the responses of crop growth and development to environmental conditions, but also the feedbacks to land surface processes. For quantitative evaluation of the effects of crop growth and development on surface fluxes in China, two numerical experiments were conducted over continental China： one by BATS CERES and one by the original BATS. Comparison of the two runs shows decreases of leaf area index and fractional vegetation cover when incorporating dynamic crops in land surface simulation, which lead to less canopy interception, vegetation transpiration, total evapotranspiration, top soil moisture, and more soil evaporation, surface runoff, and root zone soil moisture. These changes are accompanied by decreasing latent heat flux and increasing sensible heat flux in the cropland region. In addition, the comparison between the simulations and observations proved that incorporating the crop growth and development process into the land surface model could reduce the systematic biases of the simulated leaf area index and top soil moisture, hence improve the simulation of land surface fluxes.

Connections between Surface Sensible Heat Net Flux and Regional Summer Precipitation over China

Using the observed monthly precipitation and NCEP (National Centers for Environmental Prediction) reanalysis surface ?ux data from 1951–2000, the connections between the seasonal SSHNF (Surface Sensible Heat Net Flux) over the Asian continent and the regional summer precipitation of China were examined. The patterns of collective and individual correlations were identi?ed. The results indicate that the response of the regional summer precipitation of China to the seasonal SSHNF over the study area varies according to region and season. The interannual variability of summer precipitation anomalies over Xinjiang, the northernmost Northeast China, and the North China Plain are most sensitive to the anomaly of the seasonal SSHNF. There are signi?cant collective correlations between the interannual anomalies of the seasonal SSHNF and summer precipitation over these regions. In contrast, the Southeast Tibetan Plateau, Huaihe River Valley, and surrounding areas exhibit the least signi?cant correlation. Signi?cant individual correlations exist between the summer precipitation over the southernmost Northeast China, East Inner Mongolia, South of the Yangtze River and South China and the seasonal SSHNF in certain seasons over the following areas: near Lake Baikal and Lake Balkhash, near Da Hinggan Mountains and Xiao Hinggan Mountains, as well as the Tibetan Plateau.

Surface latent heat flux anomalies preceding inland earthquakes in China

Using data from the National Center for Environmental Prediction （NCEP）, the paper analyzed the surface latent heat flux （SLHF） variations for five inland earthquakes occurred in some lake area, moist area and arid area of China during recent years. We used the SLHF daily and monthly data to differentiate the global and seasonal variability from the transient local anomalies. The temporal scale of the observed variations is 1-2 months before and after the earthquakes, and spatial scale is about 10°×10°. The result suggests that the SLHFs adjacent the epicenters all are anomalous high value （〉μ＋2σ） 8-30 days before the shocks as compared with past several years of data. Different from the abnormal meteorological phenomenon, the distribution of the anomalies was isolated and local, which usually occurred in the epicenter and its adjacent area, or along the fault lines. The increase of SLHF was tightly related with the season which the earthquake occurs in; the maximal （125 W/m^2, Pu＇er earthquake） and minimal （25 W/m^2, Gaize earthquake） anomalies were in summer and winter, respectively. The abundant surface water and groundwater in the epicenter and its adjacent region can provide necessary condition for the change of SLHF. To further confirm the reliability of SLHF anomaly, it is necessary to explore its physical mechanism in depth by more earthquake cases.

Natural convection of nanofluid over vertical plate embedded in porous medium: prescribed surface heat flux

The aim of the present paper is to analyze the natural convection heat and mass transfer of nanofluids over a vertical plate embedded in a saturated Darcy porous medium subjected to surface heat and nanoparticle fluxes. To carry out the numerical solution, two steps are performed. The governing partial differential equations are firstly simplified into a set of highly coupled nonlinear ordinary differential equations by appropriate similarity variables, and then numerically solved by the finite difference method. The obtained similarity solution depends on four non-dimensional parameters, i.e., the Brownian motion parameter （Nb）, the buoyancy ratio （Nr）, the thermophoresis parameter （Nt）, and the Lewis number （Le）. The variations of the reduced Nusselt number and the reduced Sherwood number with Nb and Nt for various values of Le and Nr are discussed in detail. Simulation results depict that the increase in Nb, Nt, or Nr decreases the reduced Nusselt number. An increase in the Lewis number increases both of the reduced Nusselt number and the Sherwood number. The results also reveal that the nanoparticle concentration boundary layer thickness is much thinner than those of the thermal and hydrodynamic boundary layers.

A Note on Reviving the Goddard Satellite-Based Surface Turbulent Fluxes (GSSTF) Dataset

Accurate sea surface flux measurements are crucial for understanding the global water and energy cycles. The oceanic evaporation, which is a major component of the global oceanic fresh water flux, is useful for predicting oceanic circulation and transport. The global Goddard Satellite-based Surface Turbulent Fluxes Version-2 （GSSTF2; July 1987–December 2000） dateset that was o？cially released in 2001 has been widely used by scientific community for global energy and water cycle research, and regional and short period data analyses. We have recently been funded by NASA to resume processing the GSSTF dataset with an objective of continually producing a uniform dataset of sea surface turbulent fluxes, derived from remote sensing data. The dataset is to be reprocessed and brought up-to-date （GSSTF2b） using improved input datasets such as a recently upgraded NCEP/DOE sea surface temperature reanalysis, and an upgraded surface wind and microwave brightness temperature V6 dataset （Version 6） from the Special Sensor Microwave Imager （SSM/I） produced by Remote Sensing Systems （RSS）. A second new product （GSSTF3） is further proposed with a finer temporal （12-h） and spatial （0.25° × 0.25°） resolution. GSSTF2b （July 1987–December 2008） and GSSTF3 （July 1999–December 2009） will be released for the research community to use by late 2009 and early 2011, respectively.

Surface Roughness of Flux Film in Continuous Casting Mold

The corundum plates with a groove were used to freeze molten flux into solid slice to simulate the flux film formed in continuous casting mold,and thereby to study the formation mechanism of flux film with different surface roughness.The effect of some factors on the surface roughness of flux film,such as reheating rate,cooling rate,flux film thickness and crystallization ratio,was discussed.

Effects of surface waves and sea spray on air–sea fluxes during the passage of Typhoon Hagupit

Air–sea exchange plays a vital role in the development and maintenance of tropical cyclones（TCs）. Although studies have suggested the dependence of air–sea fluxes on surface waves and sea spray, how these processes modify those fluxes under TC conditions have not been sufficiently investigated based on in-situ observations.Using continuous meteorological and surface wave data from a moored buoy in the northern South China Sea,this study examines the effects of surface waves and sea spray on air–sea fluxes during the passage of Typhoon Hagupit. The mooring was within about 40 km of the center of Hagupit. Surface waves could increase momentum flux to the ocean by about 15%, and sea spray enhanced both sensible and latent heat fluxes to the atmosphere,causing Hagupit to absorb 500 W/m^2 more heat flux from the ocean. These results have powerful implications for understanding TC–ocean interaction and improving TC intensity forecasting.

Enhancement of the flux for polypropylene hollow fiber membrane in a submerged membrane-bioreactor by surface modification

To improve its limiting flux and antifouling characteristics in a submerged membrane-bioreactor （SMBR） for wastewater treatment, polypropylene hollow fiber microporous membrane （PPHFMM） was surface-modified by the plasma-induced immobilization of poly （N-vinyl-2-pyrrolidone） （PVP） and the plasma treatment with different gases respectively. Attenuated total reflection-Fourier transform infrared spectroscopy （FT-IR/ATR）, X-ray photoelectron spectroscopy （XPS） and field emission scanning electron microscope （FE-SEM） were used to characterize the structural and morphological changes on the membrane surface. Water contact angle was measured by the sessile drop method. It was found that the water contact angle was 128.8, 72.3, 62.7, 74.4, 79.1, 86.3, and 71.3° for the nascent, PVP-immobilized, air, 02, Ar, CO2 and H2O plasma treated PPHFMM, respectively. The SMBR was operated at fixed transmembrane pressure to determine the limiting flux for the PPHFMM before and after surface modification. Results showed that the limiting flux appeared to be 103, 159, 117, 133, 136, 121 and 152 L/（m^2· h） for the nascent, PVP-immobilized, air, O2, At, CO2 and H2O plasma treated PPHFMM, respectively. After continuous operation for about 50 h in the SMBR, the antifouling characteristics were improved to some extent.

Estimation of diameter and surface area flux of bubbles based on operational gas dispersion parameters by using regression and ANFIS

Adaptive neuro fuzzy inference system (ANFIS) procedure and regression methods were used to predict the Sauter mean bubble (bubble diameter) and surface area flux of the bubble in a flotation process. The operational conditions of flotation, impeller peripheral speed, superficial gas velocity, and weight percent solids were used as inputs of methods. By using the mentioned operational conditions, the non linear regression results showed that Sauter mean, and surface area flux of the bubble are predictable variables, where the coefficients of determination (R 2 ) are 0.57 and 0.74, respectively. To increase the accuracy of prediction an ANFIS model with cluster radius of 0.4 was applied. ANFIS model was capable of estimating both Sauter mean, and surface area flux of the bubble, where in a testing stage, satisfactory correlations, R 2 = 0.78, and 0.86, were achieved for Sauter mean, and surface area flux of bubble, respectively. Results show that the proposed ANFIS model can accurately estimate outputs and be used in order to predict the parameters without having to conduct the new experiments in a laboratory.

Global air-sea surface carbon dioxide transfer velocity and flux estimated using 17 a altimeter data and a new algorithm

The global distributions of the air-sea CO2 transfer velocity and flux are retrieved from TOPEX/Poseidon and Jason altimeter data from October 1992 to December 2009 using a combined algorithm. The 17 a average global, area-weighted, Schmidt number-corrected mean gas transfer velocity is 21.26 cm/h, and the full exploration of the uncertainty of this estimate awaits further data. The average total CO2 flux （calculated by carbon） from atmosphere to ocean during the 17 a was 2.58 Pg/a. The highest transfer velocity is in the circumpolar current area, because of constant high wind speeds and currents there. This results in strong CO2 fluxes. CO2 fluxes are strong but opposite direction in the equatorial east Pacific Ocean, because the air-sea CO2 partial pressure difference is the largest in the global cceans. The results differ from the previous studies calculated using the wind speed. It is demonstrated that the air-sea transfer velocity is very important for estimating air-sea CO2 flux. It is critical to have an accurate estimation for improving calculation of CO2 flux within climate change studies.