Influence of Input Pulse Durations on Properties of Er^(3+)/Yb^(3+) Co-doped DCFA

Based on propagation-rate equations, the influence of different input pulse durations on the properties of Er^3＋/Yb^3＋ co-doped double-clad fiber amplifier at dynamic equilibrium was analyzed. The change characteristic of output power sag with pulse duration and repetition rate was shown. Whether single or multichannel input pulses are amplified, the shorter the input pulse duration is, the smaller the power sags of output pulse will be. At low repetition rate, upper gain values（Gupper） of gain swing are almost the same for different input pulse durations, which tend to the small signal gain, but lower gain value（Glower） of short input pulse is larger than that of long input pulse. At highrepetition rate, lower gain value（Glower） approaches to upper gain value（Glower）.

Preparation and characterization of Er^(3+)-Yb^(3+)-Ce^(3+) co-doped transparent glass ceramic containing nano Ca_5(PO4)_3F crystals

A transparent glass ceramic tri-doped with Ce3＋/Er3＋/yb3＋ was fabricated by the high-temperature melting technique and following heat-treatment. X-ray diffraction and transmission electron microscope results demonstrated that Cas（PO4）3F（FAP） nanocrystals, possessed with preferable emission performances for the 1.54 μm transition for doping Er3＋, were homogeneously pre- cipitated among the glass matrix with a mean size of 30 rim. Addition of Ce3＋ greatly enhanced 1.54 ~tm fluorescence of Er3＋ by the cross relaxation energy transfer between Er3＋ and Ce3＋. Meanwhile, incorporation of Ce3＋ dramatically decreased the visible upcon- version emission intensity of glass ceramic than that of glass, suggesting that Ce3＋ might incorporate into the FAP nanocrystals. The properties of this transparent glass ceramic showed the potential application as an efficient 980 nm pumped infrared laser medium.

Multiphoton process and optical amplification in Er^(3+)-Yb^(3+)-doped fiber pumped by Ti:Al_2O_3 tunable laser at 980-nm band

The .Er3+-Yb3+-doped fiber has a broadened absorption spectrum, which means the pumping sources can work efficiently from 810 to 1100nm. Among them 980nm is the maximum.absorption （10 dB/km） wavelength. By energy transferring and multiphoton process, the visible and ultraviolet radiation occurs when the Er3+-Yb3+-doped fiber is pumped by the laser at 980-nm band. Further researches on the mechanism of the fluorescence of Er3+-Yb3+-doped silica fiber pumped by Ti: A12O3 tunable laser at 980-nm band are helpful