We present an experimental study on low-threshold broadband spectrum generation mainly due to the amplirfication of the cascaded stimulated Raman scattering (SRS) effect in a four-stage fiber master oscillator power...We present an experimental study on low-threshold broadband spectrum generation mainly due to the amplirfication of the cascaded stimulated Raman scattering (SRS) effect in a four-stage fiber master oscillator power amplifier system. The cascaded SRS is achieved by using a long passive fiber pumped by a pulsed fiber laser cen: tered at wavelength 1064 nm. The amplified spontaneous emission during the amplification process is efficiently suppressed by cutting the length of the passive fiber and by using a double-clad ytterbium-doped fiber amplifier. The generated broadband spectrum spans from 960nm to 1700nm with maximum average output 13.6 W and average spectral power density approximately 17. 7 mW/nm.展开更多
A novel and fast model of erbium-doped fiber amplifiers (EDFAs) is presented. By calculating a typical EDFA, numerical results are compared with the results obtained by spectral-solved method. The results of compariso...A novel and fast model of erbium-doped fiber amplifiers (EDFAs) is presented. By calculating a typical EDFA, numerical results are compared with the results obtained by spectral-solved method. The results of comparison show that such a model can improve the computational speed and preserve the precision. Some characteristics of the EDFA are then analyzed using this model. The results are consistent with those of the experiments.展开更多
An all-fiber polarization maintaining high-power laser system operating at 1.7 μm based on the Ramaninduced soliton self-frequency shifting effect is demonstrated. The entirely fiberized system is built by erbiumdope...An all-fiber polarization maintaining high-power laser system operating at 1.7 μm based on the Ramaninduced soliton self-frequency shifting effect is demonstrated. The entirely fiberized system is built by erbiumdoped oscillator and two-stage amplifiers with polarization maintaining commercial silica fibers and devices, which can provide robust and stable soliton generation. High-power soliton laser with the average power of 0.28 W,the repetition rate of 42.7 MHz, and pulse duration of 515 fs is generated directly from the main amplifier.Our experiment provides a feasible method for high-power all-fiber polarization maintaining femtosecond laser generation working at 1.7 μm.展开更多
Transient response of an erbium-doped fiber amplifier(EDFA) is studied in an externally-modulated analog link.Double tones represented as transmitted radio frequency and dither signals are introduced.Extra modulation ...Transient response of an erbium-doped fiber amplifier(EDFA) is studied in an externally-modulated analog link.Double tones represented as transmitted radio frequency and dither signals are introduced.Extra modulation is generated owing to the EDFA’s transient response caused by a low-frequency dither signal.Therefore,the parasitic modulation is superposed to the output signals and may significantly affect in-band electrical spectra.Analytical and numerical solutions are both given,which agree well with experimental results.This work indicates that a suitable dither signal should be selected to maximize the carrier to intermodulation ratio.In-band spurious free dynamic range is optimized in the meantime.展开更多
Using the few-mode erbium-doped fiber(FM-EDF)with a simple two-layer erbium-doped structure,we demonstrate an all-fiber FM-EDF amplifier.The gain equalization among the six spatial modes supported by the FM-EDF is ach...Using the few-mode erbium-doped fiber(FM-EDF)with a simple two-layer erbium-doped structure,we demonstrate an all-fiber FM-EDF amplifier.The gain equalization among the six spatial modes supported by the FM-EDF is achieved when only the pump in the fundamental mode(LP01)is applied.When the signals in six spatial modes are simultaneously amplified,the average modal gain is about 15 dB,and differential modal gain is about 2.5 dB for the signal at 1550 nm.展开更多
We report an all-fiber high power,single frequency large-mode area (LMA) linearly polarized ytterbiumdoped fiber amplifiers (YDFA) module,which is based on the master oscillator multi-stage power amplifiers (MOPA...We report an all-fiber high power,single frequency large-mode area (LMA) linearly polarized ytterbiumdoped fiber amplifiers (YDFA) module,which is based on the master oscillator multi-stage power amplifiers (MOPA).The maximum output power is 43.8 W at a wavelength of 1064 nm when 60-W launched pump light is coupled,with high slope efficiency of 88%,polarization extinction rate (PER) 17.2 dB and nearly diffraction-limited beam quality (M 2 1.1).展开更多
Through the introduction of the overlapping factors between the light (pump and signal) intensities and the erbium doping distributions inside the fiber core, analytical solutions of homogeneously broadened two-level ...Through the introduction of the overlapping factors between the light (pump and signal) intensities and the erbium doping distributions inside the fiber core, analytical solutions of homogeneously broadened two-level systems for erbium-doped fiber amplifiers pumped in the 980 nm absorption band have been derived from EDFA rate equations and light propagation equations in steady-state case. By using these deduced expressions and numerical simulated methods, important features characterizing the amplifiers such as gain, pump threshold power, optimum fiber length have been analyzed and discussed.展开更多
In an erbium-doped fiber amplifier(EDFA), erbium ions act as a three-level system. Therefore, much higher pump energy is required to achieve the population inversion in an erbium-doped fiber(EDF). This higher pump ene...In an erbium-doped fiber amplifier(EDFA), erbium ions act as a three-level system. Therefore, much higher pump energy is required to achieve the population inversion in an erbium-doped fiber(EDF). This higher pump energy requirement complicates the efficient design of an EDFA. However, efficient use of the pump power can improve the EDFA performance. The improved performance of an EDFA can be obtained by reducing the doping radius of the EDF. A smaller doping radius increases pump–dopant interactions and subsequently increases the pump–photon conversion efficiency. Decreasing the doping radius allows a larger proportion of dopant ions,which are concentrated near the core, to interact with the highest pump intensity. However, decreasing the doping radius beyond a certain limit will bring the dopant ions much closer and introduce detrimental ion–ion interaction effects. In this Letter, we show that an optimal doping radius in an EDF can provide the best gain performance. Moreover, we have simulated the well-known numerical aperture effects on EDFA gain performance to support our claim.展开更多
A high-power pulsed pump method is proposed to obtain a high-energy output with an improved signal- to-noise ratio (SNR) during pulse amplification. Based on numerical analysis, the ytterbium-doped fiber amplifiers ...A high-power pulsed pump method is proposed to obtain a high-energy output with an improved signal- to-noise ratio (SNR) during pulse amplification. Based on numerical analysis, the ytterbium-doped fiber amplifiers are compared under different pumping conditions. At the same signal gain, the output using the high-power pulsed pump shows great SNR improvement and reduced output signal distortion, compared with a continuous-wave pump and a low-power pulsed pump. By adjusting the pump parameters, the amplifier can achieve the optimal output SNR without sacrificing the signal gain. We believe that the high-power pulsed pump scheme is very suitable for the high-energy nanosecond pulse amplification, which has a high SNR requirement.展开更多
A multiwavelength tunable ring-cavity erbium-doped fiber laser(EDFL)based on a Lyot filter was presented.For the proposed Lyot filter,a comb filter consisting of an EDF-polarization-maintaining fiber(EDF-PMF),a polari...A multiwavelength tunable ring-cavity erbium-doped fiber laser(EDFL)based on a Lyot filter was presented.For the proposed Lyot filter,a comb filter consisting of an EDF-polarization-maintaining fiber(EDF-PMF),a polarization controller(PC),and a circulator with four ports was used to suppress the mode competition.The light transmission direction was guaranteed by the circulator.For the proposed fiber laser,tunable single,dual,triple,quadruple,quintuple,sextuple,and septuple wavelengths were realized.A single-wavelength laser output with an optical signal-to-noise ratio(SNR)of up to30.56 dB was realized,and a tuning range of 1590.54 nm to 1599.54 nm was achieved by tuning the PC.The stability of the single,dual,triple,and quadruple-wavelength center power fluctuations was less than 0.05 dB,0.98 dB,5.07 dB,and7.71 dB respectively.When the laser was operated in the multiwavelength condition,the SNR was more than 20.97 dB.The proposed erbium-doped fiber laser is suitable for fiber-sensing system applications.展开更多
Impact of amplified spontaneous emission(ASE)noise on the stimulated Raman scattering(SRS)threshold of highpower fiber amplifiers is demonstrated numerically through a spectral evolution approach.The simulation result...Impact of amplified spontaneous emission(ASE)noise on the stimulated Raman scattering(SRS)threshold of highpower fiber amplifiers is demonstrated numerically through a spectral evolution approach.The simulation results confirm that ASE noise in the Raman wavelength band could reduce the SRS threshold of high-power fiber amplifiers significantly.As for ASE noise originated the main amplifier,it becomes stronger and reduces the SRS threshold at shorter operation wavelength below 1052 nm.As for ASE noise originated from the seed laser,it reduces the SRS threshold at different operation wavelength under the condition that the Raman ratio is over-90 dB in the seed laser.The theoretical method and results in this work could provide a well reference to extend the operation wavelength of high-power fiber lasers.展开更多
A 980-nm semiconductor saturable absorber mirror(SESAM) mode-locked Yb-doped phosphate fiber laser is demonstrated by using an all-fiber linear cavity configuration. Two different kinds of cavity lengths are introdu...A 980-nm semiconductor saturable absorber mirror(SESAM) mode-locked Yb-doped phosphate fiber laser is demonstrated by using an all-fiber linear cavity configuration. Two different kinds of cavity lengths are introduced into the oscillator to obtain a robust and stable mode-locked seed source. When the cavity length is chosen to be 6 m, the oscillator generates an average output power of 3.5 m W and a pulse width of 76.27 ps with a repetition rate of 17.08 MHz. As the cavity length is optimized to short, 4.4-m W maximum output power and 61.15-ps pulse width are produced at a repetition rate of 20.96 MHz. The output spectrum is centered at 980 nm with a narrow spectral bandwidth of 0.13 nm. In the experiment, no undesired amplified spontaneous emission(ASE) nor harmful oscillation around 1030 nm is observed. Moreover,through a two-stage all-fiber-integrated amplifier, an output power of 740 m W is generated with a pulse width of 200 ps.展开更多
We theoretically study the nonlinear compression of a 20-rnJ, 1030-nm picosecond chirped pulse from the thin-disk amplifier in a krypton gas-filled hollow-core fiber. The chirp from the thin-disk amplifier system has ...We theoretically study the nonlinear compression of a 20-rnJ, 1030-nm picosecond chirped pulse from the thin-disk amplifier in a krypton gas-filled hollow-core fiber. The chirp from the thin-disk amplifier system has little influence on the initial pulse, however, it shows an effect on the nonlinear compression in hollow-core fiber. We use a large diameter hollow waveguide to restrict undesirable nonlinear effects such as ionization; on the other hand, we employ suitable gas pressure and fiber length to promise enough spectral broadening; with 600-μm, 6-bar (1 bar = 105 Pa), 1.8-m hollow fiber, we obtain 31.5-fs pulse. Moreover, we calculate and discuss the optimal fiber lengths and gas pressures with different initial durations induced by different grating compression angles for reaching a given bandwidth. These results are meaningful for a compression scheme from picoseconds to femtoseconds.展开更多
We report the passive phase locking of four high power Yb-doped fiber amplifiers with ring cavity.The interference patterns at different output power are observed and the Strehl ratios are measured.The maximum coheren...We report the passive phase locking of four high power Yb-doped fiber amplifiers with ring cavity.The interference patterns at different output power are observed and the Strehl ratios are measured.The maximum coherent output power of the fiber array is up to 1062 W by multi-stage amplification.The stable beam profiles of various phase relationships are observed by controlling the position of the feedback fiber,in good agreement with the calculated results.By using master oscillator power-amplifier(MOPA)architecture and broadband operation of passively phased systems,higher power scaling with high beam quality appears to be feasible.展开更多
We present a stable linear-cavity single longitudinal mode (SLM) erbium-doped silica fiber laser. It consists of four fiber Bragg gratings (FBGs) directly written in a section of photosensitive erbium-doped fiber ...We present a stable linear-cavity single longitudinal mode (SLM) erbium-doped silica fiber laser. It consists of four fiber Bragg gratings (FBGs) directly written in a section of photosensitive erbium-doped fiber (EDF) to form an asymmetric three-cavity structure. The stable SLM operation at a wavelength of 1545.112 nm with a 3-dB bandwidth of 0.012 nm and an optical signal-to-noise ratio (OSNR) of about 60 dB is verified experimentally. Under laboratory conditions, the performance of a power fluctuation of less than 0.05 dB observed from the power meter for 6 h and a wavelength variation of less than 0.01 nm obtained from the optical spectrum analyzer (OSA) for about 1.5 h are demonstrated. The gain fiber length is no longer limited to only several centimeters for SLM operation because of the excellent mode-selecting ability of the asymmetric three-cavity structure. The proposed scheme provides a simple and cost-effective approach to realizing a stable SLM fiber laser.展开更多
A mode-locked erbium doped fiber laser(EDFL) is demonstrated using the vanadium oxide(V2O5) material as a saturable absorber(SA). The V2O5 based SA is hosted into poly ethylene oxide film and attached on fiber f...A mode-locked erbium doped fiber laser(EDFL) is demonstrated using the vanadium oxide(V2O5) material as a saturable absorber(SA). The V2O5 based SA is hosted into poly ethylene oxide film and attached on fiber ferule in the laser cavity. It shows 7% modulation depth with 71 MW/cm2 saturation intensity. By incorporating the SA inside the EDFL cavity with managed intra-cavity dispersion, ultrashort soliton pulses are successfully generated with a full width at half maximum of 3.14 ps. The laser operated at central wavelength of 1559.25 nm and repetition frequency of 1 MHz.展开更多
The stimulated Brillouin scattering (SBS) threshold enhancement factor in a pure white noise linewidth broad- ening Yb-doped fiber amplifier (YDFA) with a short large mode area fiber is theoretically and experimen...The stimulated Brillouin scattering (SBS) threshold enhancement factor in a pure white noise linewidth broad- ening Yb-doped fiber amplifier (YDFA) with a short large mode area fiber is theoretically and experimentally studied. We demonstrate a 1064.08nm, 11.6 GHz finewidth, 1.5 k W output power YDFA with an SBS threshold enhancement of -57 (26 W SBS threshold with single frequency seed). The output beam is near-diffraction lim- ited with a beam quality factor elM2 = 1.15 and a slope efficiency of up to 87%. No SBS or stimulated Raman scattering effects are observed in the whole power range. Further power sealing is limited by the available pump power in our system.展开更多
We demonstrate an adaptive polarization control system of a 10.2 W non-polarization-maintaining fiber amplifier based on stochastic parallel gradient decent(SPGD)algorithm.The experimental investigation shows that the...We demonstrate an adaptive polarization control system of a 10.2 W non-polarization-maintaining fiber amplifier based on stochastic parallel gradient decent(SPGD)algorithm.The experimental investigation shows that the system can used to compensate for the polarization fluctuation of the fiber amplifier effectively and perform well over a long-time observation.When the adaptive polarization control system is in closed loop,the extinction ratio increases from 2.28 dB to 11.54 dB,and more than 93.4%of the total power in desired polarization direction is achieved.展开更多
In this paper,the chaotic behaviors in an erbium-doped fiber(EDF) single-ring laser(EDFSRL) are investigated experimentally by using the loss modulation method.An electro-optic modulator(EOM) made of LiNbO 3 cry...In this paper,the chaotic behaviors in an erbium-doped fiber(EDF) single-ring laser(EDFSRL) are investigated experimentally by using the loss modulation method.An electro-optic modulator(EOM) made of LiNbO 3 crystal is added to the system.Thus,by changing the modulation voltage and the modulation frequency of the EOM,the freedom of the EDFSRL system is increased.The chaotic characteristics of the system are studied by observing the time series and the power spectra.The experimental results indicate that the erbium-doped fiber single-ring laser system can enter into chaos states through period-doubling bifurcation and intermittency routes.展开更多
基金Supported by the National Natural Science Foundation of China under Grant No 11404404the Outstanding Youth Fund Project of Hunan Provincethe Fund of Innovation of National University of Defense Technology under Grant No B120701
文摘We present an experimental study on low-threshold broadband spectrum generation mainly due to the amplirfication of the cascaded stimulated Raman scattering (SRS) effect in a four-stage fiber master oscillator power amplifier system. The cascaded SRS is achieved by using a long passive fiber pumped by a pulsed fiber laser cen: tered at wavelength 1064 nm. The amplified spontaneous emission during the amplification process is efficiently suppressed by cutting the length of the passive fiber and by using a double-clad ytterbium-doped fiber amplifier. The generated broadband spectrum spans from 960nm to 1700nm with maximum average output 13.6 W and average spectral power density approximately 17. 7 mW/nm.
文摘A novel and fast model of erbium-doped fiber amplifiers (EDFAs) is presented. By calculating a typical EDFA, numerical results are compared with the results obtained by spectral-solved method. The results of comparison show that such a model can improve the computational speed and preserve the precision. Some characteristics of the EDFA are then analyzed using this model. The results are consistent with those of the experiments.
基金Supported by the National Natural Science Foundation of China (Grant Nos. 10225417 and 61675009)the Natural Science Foundation of Beijing Municipality (Grant Nos. 4204091 and KZ201910005006)the China Postdoctoral Science Foundation (Grant No. 212423)。
文摘An all-fiber polarization maintaining high-power laser system operating at 1.7 μm based on the Ramaninduced soliton self-frequency shifting effect is demonstrated. The entirely fiberized system is built by erbiumdoped oscillator and two-stage amplifiers with polarization maintaining commercial silica fibers and devices, which can provide robust and stable soliton generation. High-power soliton laser with the average power of 0.28 W,the repetition rate of 42.7 MHz, and pulse duration of 515 fs is generated directly from the main amplifier.Our experiment provides a feasible method for high-power all-fiber polarization maintaining femtosecond laser generation working at 1.7 μm.
文摘Transient response of an erbium-doped fiber amplifier(EDFA) is studied in an externally-modulated analog link.Double tones represented as transmitted radio frequency and dither signals are introduced.Extra modulation is generated owing to the EDFA’s transient response caused by a low-frequency dither signal.Therefore,the parasitic modulation is superposed to the output signals and may significantly affect in-band electrical spectra.Analytical and numerical solutions are both given,which agree well with experimental results.This work indicates that a suitable dither signal should be selected to maximize the carrier to intermodulation ratio.In-band spurious free dynamic range is optimized in the meantime.
基金supported by the National Basic Research Program of China(No.2014CB340103/01)
文摘Using the few-mode erbium-doped fiber(FM-EDF)with a simple two-layer erbium-doped structure,we demonstrate an all-fiber FM-EDF amplifier.The gain equalization among the six spatial modes supported by the FM-EDF is achieved when only the pump in the fundamental mode(LP01)is applied.When the signals in six spatial modes are simultaneously amplified,the average modal gain is about 15 dB,and differential modal gain is about 2.5 dB for the signal at 1550 nm.
基金supported by the National "863" Program of China (No.2008AA03Z405)the National Natural Science Foundation of China (No.60907045)
文摘We report an all-fiber high power,single frequency large-mode area (LMA) linearly polarized ytterbiumdoped fiber amplifiers (YDFA) module,which is based on the master oscillator multi-stage power amplifiers (MOPA).The maximum output power is 43.8 W at a wavelength of 1064 nm when 60-W launched pump light is coupled,with high slope efficiency of 88%,polarization extinction rate (PER) 17.2 dB and nearly diffraction-limited beam quality (M 2 1.1).
基金Project supported by the Chinese Academy of Sciences
文摘Through the introduction of the overlapping factors between the light (pump and signal) intensities and the erbium doping distributions inside the fiber core, analytical solutions of homogeneously broadened two-level systems for erbium-doped fiber amplifiers pumped in the 980 nm absorption band have been derived from EDFA rate equations and light propagation equations in steady-state case. By using these deduced expressions and numerical simulated methods, important features characterizing the amplifiers such as gain, pump threshold power, optimum fiber length have been analyzed and discussed.
基金support from King Fahd University of Petroleum and Minerals(KFUPM)King Abdulaziz City for Science and Technology(KACST)via KACST-TIC in Solid State Lighting(Nos.EE2381 and KACST TIC R2-FP-008)
文摘In an erbium-doped fiber amplifier(EDFA), erbium ions act as a three-level system. Therefore, much higher pump energy is required to achieve the population inversion in an erbium-doped fiber(EDF). This higher pump energy requirement complicates the efficient design of an EDFA. However, efficient use of the pump power can improve the EDFA performance. The improved performance of an EDFA can be obtained by reducing the doping radius of the EDF. A smaller doping radius increases pump–dopant interactions and subsequently increases the pump–photon conversion efficiency. Decreasing the doping radius allows a larger proportion of dopant ions,which are concentrated near the core, to interact with the highest pump intensity. However, decreasing the doping radius beyond a certain limit will bring the dopant ions much closer and introduce detrimental ion–ion interaction effects. In this Letter, we show that an optimal doping radius in an EDF can provide the best gain performance. Moreover, we have simulated the well-known numerical aperture effects on EDFA gain performance to support our claim.
文摘A high-power pulsed pump method is proposed to obtain a high-energy output with an improved signal- to-noise ratio (SNR) during pulse amplification. Based on numerical analysis, the ytterbium-doped fiber amplifiers are compared under different pumping conditions. At the same signal gain, the output using the high-power pulsed pump shows great SNR improvement and reduced output signal distortion, compared with a continuous-wave pump and a low-power pulsed pump. By adjusting the pump parameters, the amplifier can achieve the optimal output SNR without sacrificing the signal gain. We believe that the high-power pulsed pump scheme is very suitable for the high-energy nanosecond pulse amplification, which has a high SNR requirement.
基金Beijing Great Wall Scholars Program(Grant No.CIT&TCD20190323)Beijing Youth Talent Support Program(Grant No.Z2019042)the National Natural Science Foundation of China(Grant No.61875237).
文摘A multiwavelength tunable ring-cavity erbium-doped fiber laser(EDFL)based on a Lyot filter was presented.For the proposed Lyot filter,a comb filter consisting of an EDF-polarization-maintaining fiber(EDF-PMF),a polarization controller(PC),and a circulator with four ports was used to suppress the mode competition.The light transmission direction was guaranteed by the circulator.For the proposed fiber laser,tunable single,dual,triple,quadruple,quintuple,sextuple,and septuple wavelengths were realized.A single-wavelength laser output with an optical signal-to-noise ratio(SNR)of up to30.56 dB was realized,and a tuning range of 1590.54 nm to 1599.54 nm was achieved by tuning the PC.The stability of the single,dual,triple,and quadruple-wavelength center power fluctuations was less than 0.05 dB,0.98 dB,5.07 dB,and7.71 dB respectively.When the laser was operated in the multiwavelength condition,the SNR was more than 20.97 dB.The proposed erbium-doped fiber laser is suitable for fiber-sensing system applications.
基金the National Natural Science Foundation of China(Grant Nos.62005313 and 62061136013).
文摘Impact of amplified spontaneous emission(ASE)noise on the stimulated Raman scattering(SRS)threshold of highpower fiber amplifiers is demonstrated numerically through a spectral evolution approach.The simulation results confirm that ASE noise in the Raman wavelength band could reduce the SRS threshold of high-power fiber amplifiers significantly.As for ASE noise originated the main amplifier,it becomes stronger and reduces the SRS threshold at shorter operation wavelength below 1052 nm.As for ASE noise originated from the seed laser,it reduces the SRS threshold at different operation wavelength under the condition that the Raman ratio is over-90 dB in the seed laser.The theoretical method and results in this work could provide a well reference to extend the operation wavelength of high-power fiber lasers.
基金supported by the National Natural Science Foundation of China(Grant No.61205047)
文摘A 980-nm semiconductor saturable absorber mirror(SESAM) mode-locked Yb-doped phosphate fiber laser is demonstrated by using an all-fiber linear cavity configuration. Two different kinds of cavity lengths are introduced into the oscillator to obtain a robust and stable mode-locked seed source. When the cavity length is chosen to be 6 m, the oscillator generates an average output power of 3.5 m W and a pulse width of 76.27 ps with a repetition rate of 17.08 MHz. As the cavity length is optimized to short, 4.4-m W maximum output power and 61.15-ps pulse width are produced at a repetition rate of 20.96 MHz. The output spectrum is centered at 980 nm with a narrow spectral bandwidth of 0.13 nm. In the experiment, no undesired amplified spontaneous emission(ASE) nor harmful oscillation around 1030 nm is observed. Moreover,through a two-stage all-fiber-integrated amplifier, an output power of 740 m W is generated with a pulse width of 200 ps.
基金Project supported by the National Basic Research Program of China(Grant No.2011CB808101)the Funds from the Chinese Academy of Sciences,and the National Natural Science Foundation of China(Grant Nos.11127901,10734080,61221064,60908008,and 61078037)
文摘We theoretically study the nonlinear compression of a 20-rnJ, 1030-nm picosecond chirped pulse from the thin-disk amplifier in a krypton gas-filled hollow-core fiber. The chirp from the thin-disk amplifier system has little influence on the initial pulse, however, it shows an effect on the nonlinear compression in hollow-core fiber. We use a large diameter hollow waveguide to restrict undesirable nonlinear effects such as ionization; on the other hand, we employ suitable gas pressure and fiber length to promise enough spectral broadening; with 600-μm, 6-bar (1 bar = 105 Pa), 1.8-m hollow fiber, we obtain 31.5-fs pulse. Moreover, we calculate and discuss the optimal fiber lengths and gas pressures with different initial durations induced by different grating compression angles for reaching a given bandwidth. These results are meaningful for a compression scheme from picoseconds to femtoseconds.
基金Supported by the National Natural Science Foundation of China under Grant Nos 60908011 and 60907045the National High Technology Research and Development Program of China under Grant No 2008AA03Z405the National Science and Technology Major Project of China under Grant No 2010ZX04013 and the Shanghai“Phosphor”Science Foundation under Grant No 09QB1401700.
文摘We report the passive phase locking of four high power Yb-doped fiber amplifiers with ring cavity.The interference patterns at different output power are observed and the Strehl ratios are measured.The maximum coherent output power of the fiber array is up to 1062 W by multi-stage amplification.The stable beam profiles of various phase relationships are observed by controlling the position of the feedback fiber,in good agreement with the calculated results.By using master oscillator power-amplifier(MOPA)architecture and broadband operation of passively phased systems,higher power scaling with high beam quality appears to be feasible.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61077069 and 61107094)the Innovation Foundation for Excellent Doctoral Candidates of Beijing Jiaotong University, China (Grant No. 2011YJS202)
文摘We present a stable linear-cavity single longitudinal mode (SLM) erbium-doped silica fiber laser. It consists of four fiber Bragg gratings (FBGs) directly written in a section of photosensitive erbium-doped fiber (EDF) to form an asymmetric three-cavity structure. The stable SLM operation at a wavelength of 1545.112 nm with a 3-dB bandwidth of 0.012 nm and an optical signal-to-noise ratio (OSNR) of about 60 dB is verified experimentally. Under laboratory conditions, the performance of a power fluctuation of less than 0.05 dB observed from the power meter for 6 h and a wavelength variation of less than 0.01 nm obtained from the optical spectrum analyzer (OSA) for about 1.5 h are demonstrated. The gain fiber length is no longer limited to only several centimeters for SLM operation because of the excellent mode-selecting ability of the asymmetric three-cavity structure. The proposed scheme provides a simple and cost-effective approach to realizing a stable SLM fiber laser.
文摘A mode-locked erbium doped fiber laser(EDFL) is demonstrated using the vanadium oxide(V2O5) material as a saturable absorber(SA). The V2O5 based SA is hosted into poly ethylene oxide film and attached on fiber ferule in the laser cavity. It shows 7% modulation depth with 71 MW/cm2 saturation intensity. By incorporating the SA inside the EDFL cavity with managed intra-cavity dispersion, ultrashort soliton pulses are successfully generated with a full width at half maximum of 3.14 ps. The laser operated at central wavelength of 1559.25 nm and repetition frequency of 1 MHz.
基金Supported by the National Natural Science Foundation of China under Grant Nos U1330134,61308024 and 11174305the National High-Technology Research and Development Program of China under Grant No 2014AA041901the Shanghai Natural Science Foundation under Grant No 11ZR1441400
文摘The stimulated Brillouin scattering (SBS) threshold enhancement factor in a pure white noise linewidth broad- ening Yb-doped fiber amplifier (YDFA) with a short large mode area fiber is theoretically and experimentally studied. We demonstrate a 1064.08nm, 11.6 GHz finewidth, 1.5 k W output power YDFA with an SBS threshold enhancement of -57 (26 W SBS threshold with single frequency seed). The output beam is near-diffraction lim- ited with a beam quality factor elM2 = 1.15 and a slope efficiency of up to 87%. No SBS or stimulated Raman scattering effects are observed in the whole power range. Further power sealing is limited by the available pump power in our system.
基金Supported by the Innovation Foundation for Graduates in National University of Defense Technology under Grant S120703.
文摘We demonstrate an adaptive polarization control system of a 10.2 W non-polarization-maintaining fiber amplifier based on stochastic parallel gradient decent(SPGD)algorithm.The experimental investigation shows that the system can used to compensate for the polarization fluctuation of the fiber amplifier effectively and perform well over a long-time observation.When the adaptive polarization control system is in closed loop,the extinction ratio increases from 2.28 dB to 11.54 dB,and more than 93.4%of the total power in desired polarization direction is achieved.
基金Project supported by the Science and Technology Development Program of Jilin Province,China (Grant No. 20090309)
文摘In this paper,the chaotic behaviors in an erbium-doped fiber(EDF) single-ring laser(EDFSRL) are investigated experimentally by using the loss modulation method.An electro-optic modulator(EOM) made of LiNbO 3 crystal is added to the system.Thus,by changing the modulation voltage and the modulation frequency of the EOM,the freedom of the EDFSRL system is increased.The chaotic characteristics of the system are studied by observing the time series and the power spectra.The experimental results indicate that the erbium-doped fiber single-ring laser system can enter into chaos states through period-doubling bifurcation and intermittency routes.