Geophysical Study: Estimation of Deposit Depth Using Gravimetric Data and Euler Method (Jalalabad Iron Mine, Kerman Province of IRAN)

Mineral exploration is done by different methods. Geophysical and geochemical studies are two powerful tools in this field. In integrated studies, the results of each study are used to determine the location of the drilling boreholes. The purpose of this study is to use field geophysics to calculate the depth of mineral reserve. The study area is located 38 km from Zarand city called Jalalabad iron mine. In this study, gravimetric data were measured and mineral depth was calculated using the Euler method. 1314 readings have been performed in this area. The rocks of the region include volcanic and sedimentary. The source of the mineralization in the area is hydrothermal processes. After gravity measuring in the region, the data were corrected, then various methods such as anomalous map remaining in levels one and two, upward expansion, first and second-degree vertical derivatives, analytical method, and analytical signal were drawn, and finally, the depth of the deposit was estimated by Euler method. As a result, the depth of the mineral deposit was calculated to be between 20 and 30 meters on average.

The Semi-implicit Euler Method for Stochastic Pantograph Equations with Jumps

In this paper,we present the semi-implicit Euler（SIE）numerical solution for stochastic pantograph equations with jumps and prove that the SIE approximation solution converges to the exact solution in the mean-square sense under the Local Lipschitz condition.

Euler’s First-Order Explicit Method–Peridynamic Differential Operator for Solving Population Balance Equations of the Crystallization Process

Using Euler’s first-order explicit(EE)method and the peridynamic differential operator(PDDO)to discretize the time and internal crystal-size derivatives,respectively,the Euler’s first-order explicit method–peridynamic differential operator(EE–PDDO)was obtained for solving the one-dimensional population balance equation in crystallization.Four different conditions during crystallization were studied:size-independent growth,sizedependent growth in a batch process,nucleation and size-independent growth,and nucleation and size-dependent growth in a continuous process.The high accuracy of the EE–PDDO method was confirmed by comparing it with the numerical results obtained using the second-order upwind and HR-van methods.The method is characterized by non-oscillation and high accuracy,especially in the discontinuous and sharp crystal size distribution.The stability of the EE–PDDO method,choice of weight function in the PDDO method,and optimal time step are also discussed.

基于蒙特卡洛法的Euler-Bernoulli梁基频和振型求解方法

将Rayleigh法和蒙特卡洛法相结合,在Euler-Bernoulli梁理论假设下求解了均匀梁、变截面梁和附带集中质量的变截面梁自由振动问题.对原本连续的梁结构模型进行离散化处理,利用蒙特卡洛法给出梁结构的假设振型.将假设得到的梁结构振型函数代入Rayleigh法,多次计算过程中,将历次基频所得值与计算所得最小值进行比较,根据其相对误差判断是否满足收敛条件,进而求得基频及对应的振型.结果表明,不同计算模型中基频最大误差不超过10%,能够满足工程需求,且精度和时间的控制参数调整灵活,使用者可根据自身需要自行调节.该方法理论简明,适用范围广泛,能够快速准确地求解诸多类型的梁结构基频和振型.

随机年龄结构固定资产系统倒向Euler法的p阶矩耗散性

在单边Lipschitz条件下,研究了一类随机年龄结构固定资产系统倒向Euler法数值解的p阶矩耗散性.当0<p<1时,步长满足一定条件可以得到系统的p阶矩耗散性;而p=2时,在对步长没有任何限制条件的情况下,得到了系统的均方耗散性.最后,通过数值例子验证了理论结果的可行性和有效性.

扩散系数Holder连续的随机微分方程的截断Euler-Maruyama方法

本文研究漂移系数超线性增长和扩散系数Holder连续的随机微分方程的截断Euler-Maruyama方法的强收敛性.研究结果显示强收敛率依赖于Holder指数.本文给出一个例子验证所得的结果.

能量泛函及Euler-Lagrange方程在图像降噪中的应用研究

研究了自适应分数阶偏微分方程修正模型的能量泛函及Euler-Lagrange方程。首先,定义了自适应分数阶偏微分方程修正模型的能量泛函,其中包含未知函数和拉格朗日乘子的集合。然后,通过求解能量泛函的极值方程,推导出了Euler-Lagrange方程。最后,讨论了Euler-Lagrange方程在自适应分数阶偏微分方程修正模型中的应用。

Comparative Study on Results of Euler,Improved Euler and Run­ge-Kutta Methods for Solving the Engineering Unknown Problems

The paper presents the comparative study on numerical methods of Euler method,Improved Euler method and fourth-order Runge-Kutta method for solving the engineering problems and applications.The three proposed methods are quite efficient and practically well suited for solving the unknown engineering problems.This paper aims to enhance the teaching and learning quality of teachers and students for various levels.At each point of the interval,the value of y is calculated and compared with its exact value at that point.The next interesting point is the observation of error from those methods.Error in the value of y is the difference between calculated and exact value.A mathematical equation which relates various functions with its derivatives is known as a differential equation.It is a popular field of mathematics because of its application to real-world problems.To calculate the exact values,the approximate values and the errors,the numerical tool such as MATLAB is appropriate for observing the results.This paper mainly concentrates on identifying the method which provides more accurate results.Then the analytical results and calculates their corresponding error were compared in details.The minimum error directly reflected to realize the best method from different numerical methods.According to the analyses from those three approaches,we observed that only the error is nominal for the fourth-order Runge-Kutta method.

A NOTE ON STABILITY OF THE SPLIT-STEP BACKWARD EULER METHOD FOR LINEAR STOCHASTIC DELAY INTEGRO-DIFFERENTIAL EQUATIONS

In the literature （Tan and Wang, 2010）, Tan and Wang investigated the convergence of the split-step backward Euler （SSBE） method for linear stochastic delay integro-differential equations （SDIDEs） and proved the mean-square stability of SSBE method under some condition. Unfortu- nately, the main result of stability derived by the condition is somewhat restrictive to be applied for practical application. This paper improves the corresponding results. The authors not only prove the mean-square stability of the numerical method but also prove the general mean-square stability of the numerical method. Furthermore, an example is given to illustrate the theory.

CONVERGENCE AND MEAN-SQUARE STABILITY OF EXPONENTIAL EULER METHOD FOR SEMI-LINEAR STOCHASTIC DELAY INTEGRO-DIFFERENTIAL EQUATIONS

In this paper,the numerical methods for semi-linear stochastic delay integro-difFerential equations are studied.The uniqueness,existence and stability of analytic solutions of semi-linear stochastic delay integro-differential equations are studied and some suitable conditions for the mean-square stability of the analytic solutions are also obtained.Then the numerical approximation of exponential Euler method for semi-linear stochastic delay integro-differential equations is constructed and the convergence and the stability of the numerical method are studied.It is proved that the exponential Euler method is convergent with strong order 1/2 and can keep the mean-square exponential stability of the analytical solutions under some restrictions on the step size.In addition,numerical experiments are presented to confirm the theoretical results.

Improvement of Euler＇s Method Using Particle Swarm Optimization

Many problems in applied mathematics lead to ordinary differential equation. In this paper, a considerable refinement and improvement of the Euler＇s method obtained using PSO （particle swarm optimization） was presented. PSO is a technique based on the cooperation between particles. The exchange of information between these particles allows to resolve difficult problems. This approach is carefully handled and tested with an illustrated example.

Euler函数方程φ(xy)=28(φ(x)+φ(y))的正整数解

利用初等方法研究了不定方程φ(xy)=28(φ(x)+φ(y))的可解性问题,并给出了该方程的全部正整数解,其中φ(n)是Euler函数。

Level Set interface treatment and its application in Euler method

Level Set interface treatment method is introduced into Euler method,which is employed for interface treatment method for multi-materials. Combined with the ghost fluid method,the moving interface is tracked. Fifth-order WENO spatial discretization and third-order TVD Runge-Kutta time discretization methods are used. Shock-wave action on bubble,implosion and velocity field Shock effect bubbles; implosion and velocity field are simulated by means of LS-MMIC3D programmed by C++. Nu-merical results show that the Level Set interface treatment method is effective and feasible for multi-material interface treatment in comparison with the WENO method.

Euler-Bernoulli海洋立管涡致强迫振动响应研究

针对海洋立管(Pipe-in-pipe,PIP)系统在海水作用下发生的振动问题,开展了对PIP系统在涡致强迫振动下的动力学响应研究,分析了在涡致强迫振动下海洋立管外管直径、轴向拉力、外激力频率对海洋立管位移响应的影响规律。基于Euler-Bernoulli双梁模型,采用Lamb-Oseen涡模型,建立了动力学模型,利用格林函数法求得该强迫振动的稳态响应。结果表明,随着管道直径增加,外激力增加,产生最大力幅值的位置离管道越远;轴向拉力对外部管道的影响较大,对内部管道的影响较小;无因次频率取0.4时,外部管道位移超出允许变形极限,内外管壁发生周期碰撞,易对海洋立管造成损伤。

Input-to-state stability of Euler-Maruyama method for stochastic delay control systems

This paper develops the mean-square exponential input-to-state stability（exp-ISS） of the Euler-Maruyama（EM） method for stochastic delay control systems（SDCSs）.The definition of mean-square exp-ISS of numerical methods is established.The conditions of the exact and EM method for an SDCS with the property of mean-square exp-ISS are obtained without involving control Lyapunov functions or functional.Under the global Lipschitz coefficients and mean-square continuous measurable inputs,it is proved that the mean-square exp-ISS of an SDCS holds if and only if that of the EM method is preserved for a sufficiently small step size.The proposed results are evaluated by using numerical experiments to show their effectiveness.

A Comparative Study on Numerical Solutions of Initial Value Problems (IVP) for Ordinary Differential Equations (ODE) with Euler and Runge Kutta Methods

This paper mainly presents Euler method and fourth-order Runge Kutta Method (RK4) for solving initial value problems (IVP) for ordinary differential equations (ODE). The two proposed methods are quite efficient and practically well suited for solving these problems. In order to verify the ac-curacy, we compare numerical solutions with the exact solutions. The numerical solutions are in good agreement with the exact solutions. Numerical comparisons between Euler method and Runge Kutta method have been presented. Also we compare the performance and the computational effort of such methods. In order to achieve higher accuracy in the solution, the step size needs to be very small. Finally we investigate and compute the errors of the two proposed methods for different step sizes to examine superiority. Several numerical examples are given to demonstrate the reliability and efficiency.

A Preconditioned Gridless Method for Solving Euler Equations at Low Mach Numbers

A preconditioned gridless method is developed for solving the Euler equations at low Mach numbers.The preconditioned system in a conservation form is obtained by multiplying apreconditioning matrix of the type of Weiss and Smith to the time derivative of the Euler equations,which are discretized using agridless technique wherein the physical domain is distributed by clouds of points.The implementation of the preconditioned gridless method is mainly based on the frame of the traditional gridless method without preconditioning,which may fail to converge for low Mach number simulations.Therefore,the modifications corresponding to the affected terms of preconditioning are mainly addressed.The numerical results show that the preconditioned gridless method still functions for compressible transonic flow simulations and additionally,for nearly incompressible flow simulations at low Mach numbers as well.The paper ends with the nearly incompressible flow over a multi-element airfoil,which demonstrates the ability of the method presented for treating flows over complicated geometries.

Analysis of regular and chaotic dynamics of the Euler-Bernoulli beams using finite difference and finite element methods

Chaotic vibrations of flexible non-linear Euler-Bernoulli beams subjected to harmonic load and with various boundary conditions（symmetric and non-symmetric）are studied in this work.Reliability of the obtained results is verified by the finite difference method（FDM）and the finite element method（FEM）with the Bubnov-Galerkin approximation for various boundary conditions and various dynamic regimes（regular and non-regular）.The influence of boundary conditions on the Euler-Bernoulli beams dynamics is studied mainly,dynamic behavior vs.control parameters { ωp,q0 } is reported,and scenarios of the system transition into chaos are illustrated.