A three-dimensional regional Eulenan model of sulfur deposition and transport is developed.Processes treated in the model include emission,transport,diffusion,gas-phase and aqueous-phase chemical process,dry depositio...A three-dimensional regional Eulenan model of sulfur deposition and transport is developed.Processes treated in the model include emission,transport,diffusion,gas-phase and aqueous-phase chemical process,dry deposition,ramout and washout of sulfur.A 'looking up table' method is provided to deal with the gas-phase chemical process including sulfur transfer Dry-depositon velocity considers the influence of underlying surface,wind,degree of stability by parameterization Model calculated values reasonably agrees with observation.Distribution of sulfur deposition and transport in East Asia are also analyzed in this paper Some amount of sulfur emission of different countries transport across boundaries,but the main origin of sulfur deposition in each country in East Asia is from itself.Furthermore.some transport paths on different layers and outlet or inlet zones are found.According to sulfur balance and budget we concluded that sulfur outlets are bigger than inlets across boundary and emissions are more than deposition in most places of East Asia展开更多
The Lagrangian Particle Dispersion Model (LPDM) in the 594 km× 594 km model domain with the horizontal grid scale of 3 km×3 km centered at a power plant and the Eulerian Transport Model (ETM) modified from t...The Lagrangian Particle Dispersion Model (LPDM) in the 594 km× 594 km model domain with the horizontal grid scale of 3 km×3 km centered at a power plant and the Eulerian Transport Model (ETM) modified from the Asian Dust Aerosol Model 2 (ADAM2) in the domain of 70° LAT × 140° LON with the horizontal grid scale of 27 km×27 km have been developed. These models have been implemented to simulate the concentration and deposition of radionuclides (137Cs and 131I) released from the accident of the Fukushima Dai-ichi nuclear power plant. It is found that both models are able to simulate quite reasonably the observed concentrations of 137Cs and 131I near the power plant. However, the LPDM model is more useful for the estimation of concentration near the power plant site in details whereas the ETM model is good for the long-range transport processes of the radionuclide plume. The estimated maximum mean surface concentration, column integrated mean concentration and the total deposition (wet+dry) by LPDM for the period from 12 March to 30 April 2011 are, respectively found to be 2.975 × 102 Bq m-3, 3.7 × 107 Bq m-2, and 1.78 × 1014 Bq m-2 for 137Cs and 1.96 × 104 Bq m-3, 2.24 × 109 Bq m-2 and 5.96 × 1014 Bq m-2 for 131I. The radionuclide plumes released from the accident power plant are found to spread wide regions not only the whole model domain of downwind regions but the upwind regions of Russia, Mongolia, Korea, eastern China, Philippines and Vietnam within the analysis period.展开更多
The mass transport velocity in a thin layer of muddy fluid is studied theoretically. The mud motion is driven by a periodic pressure load on the free surface, and the mud is described by a power-law model. Based on th...The mass transport velocity in a thin layer of muddy fluid is studied theoretically. The mud motion is driven by a periodic pressure load on the free surface, and the mud is described by a power-law model. Based on the key assumptions of the shallowness and the small deformation, a perturbation analysis is conducted up to the second order to find the mean Eulerian velocity in an Eulerian coordinate system. The numerical iteration method is adopted to solve these non-linear equations of the leading order. From the numerical results, both the first-order flow fields and the second-order mass transport velocities are examined. The verifications are made by comparing the numerical results with experimental results in the literature, and a good agreement is confirmed.展开更多
A new numerical method for groundwater flow analysis was introduced to estimate simultaneously velocity vectors and water pressure head. The method could be employed to handle the vertical flow under variably saturate...A new numerical method for groundwater flow analysis was introduced to estimate simultaneously velocity vectors and water pressure head. The method could be employed to handle the vertical flow under variably saturated conditions and for horizontal flow as well. The method allows for better estimation of velocities at the element nodes which can be used as direct input to transport models. The advection-dispersion process was treated by the Eulerian-Lagrangian approach with particle tracking technique using the velocities at FEM nodes. The method was verified with the classical one dimensional model and applied to simulate contaminant transport process through a slurry wall as a barrier to prevent leachate pollution from a sanitary landfill.展开更多
文摘A three-dimensional regional Eulenan model of sulfur deposition and transport is developed.Processes treated in the model include emission,transport,diffusion,gas-phase and aqueous-phase chemical process,dry deposition,ramout and washout of sulfur.A 'looking up table' method is provided to deal with the gas-phase chemical process including sulfur transfer Dry-depositon velocity considers the influence of underlying surface,wind,degree of stability by parameterization Model calculated values reasonably agrees with observation.Distribution of sulfur deposition and transport in East Asia are also analyzed in this paper Some amount of sulfur emission of different countries transport across boundaries,but the main origin of sulfur deposition in each country in East Asia is from itself.Furthermore.some transport paths on different layers and outlet or inlet zones are found.According to sulfur balance and budget we concluded that sulfur outlets are bigger than inlets across boundary and emissions are more than deposition in most places of East Asia
文摘The Lagrangian Particle Dispersion Model (LPDM) in the 594 km× 594 km model domain with the horizontal grid scale of 3 km×3 km centered at a power plant and the Eulerian Transport Model (ETM) modified from the Asian Dust Aerosol Model 2 (ADAM2) in the domain of 70° LAT × 140° LON with the horizontal grid scale of 27 km×27 km have been developed. These models have been implemented to simulate the concentration and deposition of radionuclides (137Cs and 131I) released from the accident of the Fukushima Dai-ichi nuclear power plant. It is found that both models are able to simulate quite reasonably the observed concentrations of 137Cs and 131I near the power plant. However, the LPDM model is more useful for the estimation of concentration near the power plant site in details whereas the ETM model is good for the long-range transport processes of the radionuclide plume. The estimated maximum mean surface concentration, column integrated mean concentration and the total deposition (wet+dry) by LPDM for the period from 12 March to 30 April 2011 are, respectively found to be 2.975 × 102 Bq m-3, 3.7 × 107 Bq m-2, and 1.78 × 1014 Bq m-2 for 137Cs and 1.96 × 104 Bq m-3, 2.24 × 109 Bq m-2 and 5.96 × 1014 Bq m-2 for 131I. The radionuclide plumes released from the accident power plant are found to spread wide regions not only the whole model domain of downwind regions but the upwind regions of Russia, Mongolia, Korea, eastern China, Philippines and Vietnam within the analysis period.
基金supported by the National Natural Science Foun-dation of China(Grant No.40376028)the Application and Basic research of Tianjin(Grant No.11JCYBJC03200)
文摘The mass transport velocity in a thin layer of muddy fluid is studied theoretically. The mud motion is driven by a periodic pressure load on the free surface, and the mud is described by a power-law model. Based on the key assumptions of the shallowness and the small deformation, a perturbation analysis is conducted up to the second order to find the mean Eulerian velocity in an Eulerian coordinate system. The numerical iteration method is adopted to solve these non-linear equations of the leading order. From the numerical results, both the first-order flow fields and the second-order mass transport velocities are examined. The verifications are made by comparing the numerical results with experimental results in the literature, and a good agreement is confirmed.
基金the National Natural Science Foundation of China (Grant No. 40201024)
文摘A new numerical method for groundwater flow analysis was introduced to estimate simultaneously velocity vectors and water pressure head. The method could be employed to handle the vertical flow under variably saturated conditions and for horizontal flow as well. The method allows for better estimation of velocities at the element nodes which can be used as direct input to transport models. The advection-dispersion process was treated by the Eulerian-Lagrangian approach with particle tracking technique using the velocities at FEM nodes. The method was verified with the classical one dimensional model and applied to simulate contaminant transport process through a slurry wall as a barrier to prevent leachate pollution from a sanitary landfill.
