The far-field microdynamic disturbance caused by the excavation of deep mineral resources and underground engineering can induce surrounding rock damage in high-stress conditions and even lead to disasters.However,the...The far-field microdynamic disturbance caused by the excavation of deep mineral resources and underground engineering can induce surrounding rock damage in high-stress conditions and even lead to disasters.However,the mechanical properties and damage/fracture evolution mechanisms of deep rock induced by microdynamic disturbance under three-dimensional stress states are unclear.Therefore,a true triaxial multilevel disturbance test method is proposed,which can completely simulate natural geostress,excavation stress redistribution(such as stress unloading,concentration and rotation),and subsequently the microdynamic disturbance triggering damaged rock failure.Based on a dynamic true triaxial test platform,true triaxial microdynamic disturbance tests under different frequency and amplitudes were carried out on monzogabbro.The results show that increasing amplitude or decreasing frequency diminishes the failure strength of monzogabbro.Deformation modulus gradually decreases during disturbance failure.As frequency and amplitude increase,the degradation rate of deformation modulus decreases slightly,disturbance dissipated energy increases significantly,and disturbance deformation anisotropy strengthens obviously.A damage model has been proposed to quantitatively characterize the disturbance-induced damage evolution at different frequency and amplitude under true triaxial stress.Before disturbance failure,the micro-tensile crack mechanism is dominant,and the micro-shear crack mechanism increases significantly at failure.With the increase of amplitude and frequency,the micro-shear crack mechanism increases.When approaching disturbance failure,the acoustic emission fractal dimension changes from a stable value to local large oscillation,and finally increases sharply to a high value at failure.Finally,the disturbance-induced failure mechanism of surrounding rock in deep engineering is clearly elucidated.展开更多
The problem of rural development arises from the evolution of rural regional system.It is urgent to deepen the research on the evolution process and mechanism of rural regional system.However,there are relatively few ...The problem of rural development arises from the evolution of rural regional system.It is urgent to deepen the research on the evolution process and mechanism of rural regional system.However,there are relatively few studies on rural development from the perspective of the evolution process,driving mechanism and evolution mechanism of rural regional system.Therefore,this study took Huang-Huai-Hai Area for example,started with the systematicness of the rural regional system,the spatio-temporal pattern and driving mechanism of rural regional system evolution,and further summarized and refined the evolution mechanism of the rural regional system.The methods of spatial pattern analysis,gray correlation degree and geographical detection were adopted.The results showed that the problems in rural areas were often dominated by one factor and produced by the joint action of many factors.Factors such as county urbanization,county economy,county public service,agricultural mechanization,surrounding cities and convenient transportation will affect the evolution of rural regional systems.Based on the evolution of the elements in the rural regional system,the evolution types of rural regional system can be divided into decline type,equilibrium type and growth type.This study can provide a reference for understanding the process of rural rise and fall and can also guide rural revitalization and rural sustainable development.展开更多
Water electrolysis,a process for producing green hydrogen from renewable energy,plays a crucial role in the transition toward a sustainable energy landscape and the realization of the hydrogen economy.Oxygen evolution...Water electrolysis,a process for producing green hydrogen from renewable energy,plays a crucial role in the transition toward a sustainable energy landscape and the realization of the hydrogen economy.Oxygen evolution reaction(OER)is a critical step in water electrolysis and is often limited by its slow kinetics.Two main mechanisms,namely the adsorbate evolution mechanism(AEM)and lattice oxygen oxidation mechanism(LOM),are commonly considered in the context of OER.However,designing efficient catalysts based on either the AEM or the LOM remains a topic of debate,and there is no consensus on whether activity and stability are directly related to a certain mechanism.Considering the above,we discuss the characteristics,advantages,and disadvantages of AEM and LOM.Additionally,we provide insights on leveraging the LOM to develop highly active and stable OER catalysts in future.For instance,it is essential to accurately differentiate between reversible and irreversible lattice oxygen redox reactions to elucidate the LOM.Furthermore,we discuss strategies for effectively activating lattice oxygen to achieve controllable steady-state exchange between lattice oxygen and an electrolyte(OH^(-)or H_(2)O).Additionally,we discuss the use of in situ characterization techniques and theoretical calculations as promising avenues for further elucidating the LOM.展开更多
Low-frequency vibrations can effectively improve natural sandstone permeability,and higher vibration frequency is associated with larger permeability.However,the optimum permeability and permeability evolution mechani...Low-frequency vibrations can effectively improve natural sandstone permeability,and higher vibration frequency is associated with larger permeability.However,the optimum permeability and permeability evolution mechanism for uranium leaching and the relationship between permeability and the change of chemical reactive rate affecting uranium leaching have not been determined.To solve the above problems,in this study,identical homogeneous sandstone samples were selected to simulate lowpermeability sandstone;a permeability evolution model considering the combined action of vibration stress,pore water pressure,water flow impact force,and chemical erosion was established;and vibration leaching experiments were performed to test the model accuracy.Both the permeability and chemical reactions were found to simultaneously restrict U6þleaching,and the vibration treatment increased the permeability,causing the U6þleaching reaction to no longer be diffusion-constrained but to be primarily controlled by the reaction rate.Changes of the model calculation parameters were further analyzed to determine the permeability evolution mechanism under the influence of vibration and chemical erosion,to prove the correctness of the mechanism according to the experimental results,and to develop a new method for determining the optimum permeability in uranium leaching.The uranium leaching was found to primarily follow a process consisting of(1)a permeability control stage,(2)achieving the optimum permeability,(3)a chemical reactive rate control stage,and(4)a channel flow stage.The resolution of these problems is of great significance for facilitating the application and promotion of lowfrequency vibration in the CO_(2)+O_(2) leaching process.展开更多
Developing highly active and robust oxygen evolution reaction(OER)electrocatalysts is still a critical challenge for water electrolyzers and metal-air batteries.Realizing the dynamic evolution of the intermediate and ...Developing highly active and robust oxygen evolution reaction(OER)electrocatalysts is still a critical challenge for water electrolyzers and metal-air batteries.Realizing the dynamic evolution of the intermediate and charge transfer during OER and developing a clear OER mechanism is crucial to design high-performance OER catalysts.Recently in Nature,Xue and colleagues revealed a new OER mechanism,coupled oxygen evolution mechanism(COM),which involves a switchable metal and oxygen redox under light irradiation in nickel oxyhydroxide-based materials.This newly developed mechanism requires a reversible geometric conversion between octahedron(NiO_(6))and square planar(NiO_(4))to achieve electronic states with both“metal redox”and“oxygen redox”during OER.The asymmetric structure endows NR-NiOOH with a nonoverlapping region between the dz^(2) orbitals and a_(1g)^(*)bands,which facilitate the geometric conversion and enact the COM pathway.As a result,NR-NiOOH exhibited better OER activity and stability than the traditional NiOOH.展开更多
According to the distribution of abutment stress in a stope,this research established the mechanical model of mining abutment pressure transmission in floor base on the theory of semi-infnite plate body in elasticity....According to the distribution of abutment stress in a stope,this research established the mechanical model of mining abutment pressure transmission in floor base on the theory of semi-infnite plate body in elasticity.This study takes the 762 working face of Haizi Coal Mine as a case in point,and analyzed the dynamic evolution law of seam floor stress during the mining process.With an organic combination of the mining floor stress and surrounding rock stress,the study obtained the change laws of the maximum principle stress and the minimum one for the floor roadway surrounding rock when mining the upper working face.Considering the non-constant pressure force state and the cracks revolution mechanisms of floor roadway surrounding rock,the research built the mechanical model of roadway stress.Simulation results verify the reliability of the above conclusions.Moreover,this model could provide the theoretical basis and technical support for controlling floor roadway surrounding rock.展开更多
Transition metal chalcogenides(TMCs)are recognized as pre-catalysts,and their(oxy)hydroxides derived from electrochemical reconstruction are the active species in the water oxidation.However,understanding the role of ...Transition metal chalcogenides(TMCs)are recognized as pre-catalysts,and their(oxy)hydroxides derived from electrochemical reconstruction are the active species in the water oxidation.However,understanding the role of the residual chalcogen in the reconstructed layer is lacking in detail,and the corresponding catalytic mechanism remains controversial.Here,taking Cu_(1-x)Co_(x)S as a platform,we explore the regulating effect and existence form of the residual S doped into the reconstructive layer for oxygen evolution reaction(OER),where a dual-path OER mechanism is proposed.First-principles calculations and operando~(18)O isotopic labeling experiments jointly reveal that the residual S in the reconstructive layer of Cu_(1-x)Co_(x)S can wisely balance the adsorbate evolution mechanism(AEM)and lattice oxygen oxidation mechanism(LOM)by activating lattice oxygen and optimizing the adsorption/desorption behaviors at metal active sites,rather than change the reaction mechanism from AEM to LOM.Following such a dual-path OER mechanism,Cu_(0.4)Co_(0.6)S-derived Cu_(0.4)Co_(0.6)OSH not only overcomes the restriction of linear scaling relationship in AEM,but also avoids the structural collapse caused by lattice oxygen migration in LOM,so as to greatly reduce the OER potential and improved stability.展开更多
Precipitation strengthening is a crucial microscopic mechanism for enhancing the strength of magnesium alloys. In order to elucidate the influence of precipitation on the microscopic deformation mechanisms and macrosc...Precipitation strengthening is a crucial microscopic mechanism for enhancing the strength of magnesium alloys. In order to elucidate the influence of precipitation on the microscopic deformation mechanisms and macroscopic mechanical response of magnesium alloys under cyclic loading conditions, we employed a crystal plasticity model to analyze the stress-strain curves, specific crystal plane diffraction intensities, and the temporal evolution of various microscopic deformation mechanisms and twinning volume fractions for an extruded magnesium alloy, AXM10304, containing coherent precipitates. The research findings indicate that precipitation does not fundamentally alter the microscopic mechanisms of this alloy. However, it hinders twinning during the compression stage, mildly promotes detwinning during the tension stage, and enhances tension secondary hardening by elevating the difficulty of activation of the prismatic slip.展开更多
The test selection and optimization (TSO) can improve the abilities of fault diagnosis, prognosis and health-state evalua- tion for prognostics and health management (PHM) systems. Traditionally, TSO mainly focuse...The test selection and optimization (TSO) can improve the abilities of fault diagnosis, prognosis and health-state evalua- tion for prognostics and health management (PHM) systems. Traditionally, TSO mainly focuses on fault detection and isolation, but they cannot provide an effective guide for the design for testability (DFT) to improve the PHM performance level. To solve the problem, a model of TSO for PHM systems is proposed. Firstly, through integrating the characteristics of fault severity and propa- gation time, and analyzing the test timing and sensitivity, a testability model based on failure evolution mechanism model (FEMM) for PHM systems is built up. This model describes the fault evolution- test dependency using the fault-symptom parameter matrix and symptom parameter-test matrix. Secondly, a novel method of in- herent testability analysis for PHM systems is developed based on the above information. Having completed the analysis, a TSO model, whose objective is to maximize fault trackability and mini- mize the test cost, is proposed through inherent testability analysis results, and an adaptive simulated annealing genetic algorithm (ASAGA) is introduced to solve the TSO problem. Finally, a case of a centrifugal pump system is used to verify the feasibility and effectiveness of the proposed models and methods. The results show that the proposed technology is important for PHM systems to select and optimize the test set in order to improve their performance level.展开更多
Thermal stabilities of microstructure and mechanical property have been investigated on superalloy U720Li, which is of great interest of application for jet engine and land-based turbine disc. The results showed that,...Thermal stabilities of microstructure and mechanical property have been investigated on superalloy U720Li, which is of great interest of application for jet engine and land-based turbine disc. The results showed that, the primary and secondary gamma' particles maintain good thermal stability at 650 and 700 degreesC with aging time up to 3000 h, while the tertiary gamma' is apparently dependent on aging temperature and time. The tertiary gamma' particles undergo a procedure of coarsening, dissolution and eventually complete disappearance with the increasing of aging time and temperature. They exhibit unusual high sensibility upon aging temperature, which is attributed to the lattice misfit between the gamma' precipitates and the matrix in the alloy. The grain boundary phase M23C6 remains stable without forming of sigma phase even with aging time up to 3000 h at 700 degreesC. Microhardness decreases apparently with increasing aging time and aging temperature. Theoretical analysis based on dislocation mechanism indicates that the change of microhardness should be attributed to the evolution of the tertiary gamma' during aging.展开更多
Microstructure evolution of wrought aluminum alloy extruded rods and the mechanism of liquid phase formation during reheating were investigated. And the relation between the volume fraction of liquid phase and the rec...Microstructure evolution of wrought aluminum alloy extruded rods and the mechanism of liquid phase formation during reheating were investigated. And the relation between the volume fraction of liquid phase and the recrystallization microstructure was proposed. The results show that increase in reheating temperature and time can augment the volume fraction of liquid phase and accelerate the grain spheroidization, as a result of which the requirement of semi-solid forming can be satisfied. Due to the higher aberration energy of grain boundary, the melting point is lowered as a result of the easy diffusion of atoms. At higher reheating temperature the grain boundary melts, the growth of the recrystallized grain is inhibited and the grain is refined. The composition of the low melt-point phase along the recrystallized grains was determined using EDS. It can be seen from the experimental results that when the extrusion rod of the wrought aluminum alloy is reheated at 610℃ for 20min, perfect fine equiaxial grains can be obtained, the average grain size is about 66.34μm and the volume fraction of solid phase is about 68%.展开更多
Highly supersaturated nanocrystalline fcc Fe60Cu40 alloy has been prepared by mechanical alloying of elemental powders. The phase transformation is monitored by X-ray diffraction (XRD),Mossbauer spectroscopy and exten...Highly supersaturated nanocrystalline fcc Fe60Cu40 alloy has been prepared by mechanical alloying of elemental powders. The phase transformation is monitored by X-ray diffraction (XRD),Mossbauer spectroscopy and extended X-ray absorption fine structure (EXAFS). The powder obtained after milling is of single fcc structure with grain size of nanometer order. The Mossbauer spectra of the milled powder can be fitted by two subspectra whose hyperfine magnetic fields are 16 MA/m and 20 MA/m while that of pure Fe disappeared. EXAFS results show that the radial structure function (RSF) of Fe K-edge changed drastically and finally became similar to that of reference Cu K-edge, while that of Cu K-edge nearly keeps unchanged in the process of milling. These imply that bcc Fe really transforms to fcc structure and alloying between Fe and Cu occurs truly on an atomic scale. EXAFS results indicate that iron atoms tend to segregate at the boundaries and Cu atoms are rich in the fcc lattice. Annealing experiments show that the Fe atoms at the interfaces are easy to cluster to α-Fe at a lower temperature, whereas the iron atoms in the lattice will form γ-Fe first at temperature above 350℃, and then transform to bcc Fe展开更多
Land desertification is a widely concerned ecological environment problem.Studying the evolution trend of desertification types is of great significance to prevent and control land desertification.In this study,we app...Land desertification is a widely concerned ecological environment problem.Studying the evolution trend of desertification types is of great significance to prevent and control land desertification.In this study,we applied the decision tree classification method,to study the land area and temporal and spatial change law of different types of desertification in the North Bank of Qinghai Lake area from 1987 to 2014,based on the current land use situation and TM remote sensing image data of Haiyan County,Qinghai Province,The results show that the area of mild desertification land and moderate desertification land in the study area has decreased,while the area of severe desertification land and extreme desertification land has increased significantly in the past 30 years.The area of desertification land decreased by 4.02 km2,of which the area of mild and moderate desertification land decreased by 39.73 km2 and 36.8 km2 respectively,and the area of severe and extreme desertification land increased by 32.78 km2 and 39.73 km2 respectively.As for the mutual transformation relationship,the transformation from severe desertification land to extreme desertification land is the main,and the junction of severe desertification land and extreme desertification land is the sensitive area of transformation.In the north shore of Qinghai Lake,the sandy land tends to expand eastward.The research provides reference basis for local land desertification monitoring,and has a great guidance for local effective land desertification and soil and water conservation.展开更多
This paper deals with the geographic distribution and geological setting of the Jehol (northeastHebei-southwest Liaoning-southeast Inner Mongolia) fauna, and discusses the origination and the evolution ofits major bio...This paper deals with the geographic distribution and geological setting of the Jehol (northeastHebei-southwest Liaoning-southeast Inner Mongolia) fauna, and discusses the origination and the evolution ofits major biological groups. It is demonstrated that the Yan-Liao (northern Hebei-western Liaoning) area is theprovenance for the fauna. Why the fauna originated and developed in the area was intimately related to suchfactors as the palaeoclimate, palaeogeography, crustal movement, volcanism and frequent reversals of magnet-ic polarity at that time, in addition to the internal factors of the organisms themselves.展开更多
Mechanical milling of fullerene (C60(C70)) was investigated to understand the structural evolu-tion. Mechanical milling could not destroy the molecular structure of C60(C70), while the longrange periodicity of the fCc...Mechanical milling of fullerene (C60(C70)) was investigated to understand the structural evolu-tion. Mechanical milling could not destroy the molecular structure of C60(C70), while the longrange periodicity of the fCc crystalline structure was easiIy damaged. Longer miIIing time couldresult in the formation of C60(C70) polymer, including C60 dimer.展开更多
The time-dependence evolution of the extinction spectra of the silver nanoplates is studied to analyze the underlying physical mechanism of the growth process. As the synthesis cycles increase, the wavelength of the a...The time-dependence evolution of the extinction spectra of the silver nanoplates is studied to analyze the underlying physical mechanism of the growth process. As the synthesis cycles increase, the wavelength of the absorption peak is first blue-shifted and then is followed by the red shift, attributing to the mode alteration of the longitudinal surface plasmon resonance of the silver nanoplates. The capping agents are also optimized for the convenient and speedy growth of the large integrated Ag nanostructure. These observations expand the comprehensive understanding of plasmon resonance of the Ag nanoplates, and give a better manipulation of their applications in the plasmonie nanodevices.展开更多
Thermal runaway(TR)of lithium-ion(Li-ion)batteries(LIBs)involves multiple forms of hazards,such as gas venting/jetting,fire,or even explosion.Explosion,as the most extreme case,is caused by the generated flammable gas...Thermal runaway(TR)of lithium-ion(Li-ion)batteries(LIBs)involves multiple forms of hazards,such as gas venting/jetting,fire,or even explosion.Explosion,as the most extreme case,is caused by the generated flammable gases,and a deflagration to detonation transition(DDT)may occur in this process.Here,overheat-to-TR tests and the corresponding outgas-induced explosion tests were conducted on 42 Ah Li-ion cells with Li[Ni_(1/3)Co_(1/3)Mn_(1/3)]O2cathode.The sum of CO_(2),H_(2),C_(2)H_(4),CO,and CH4accounted for more than 90%of the gases.Lower/upper explosion limits(LEL/UEL),laminar flame speed,and ideal stable detonation pressure were calculated to interpret the explosion characteristics and boundary.It turned out that shockwave was easily to be compressed and accelerated under higher state of charge(SOC)conditions.Thus,Li-ion cells explosion may evolve into unstable detonation in encapsulated battery pack and its evolution mechanism was explained,which provides a new idea for explosion-proof design of LIBs system.Additionally,a comprehensive assessment method was developed to intuitively characterize TR hazards.Severity of explosion presented an upward trend with the increase of SOC while the sensitivity was not the same.This study provides a further anatomy of TR,which is instructive to the safety of power battery systems.展开更多
The advancement of bimetallic catalysts holds significant promise for the innovation of oxygen evolution reaction(OER)catalysts.Drawing from adsorbate evolution mechanism(AEM)and lattice oxygen oxidation mechanism(LOM...The advancement of bimetallic catalysts holds significant promise for the innovation of oxygen evolution reaction(OER)catalysts.Drawing from adsorbate evolution mechanism(AEM)and lattice oxygen oxidation mechanism(LOM),the incorporation of dual active sites has the potential to foster novel OER pathways,such as the coupled oxygen evolution mechanism(COM),which can surpass the limitations of OER and elevate catalytic performance.In this study,uniformly distributed Fe/Ni dual-site Fe-Ni_(2)P@C electrocatalysts are crafted by upcycling metals in electroplating sludge via an eco-friendly and sustainable microbial engineering technique.Our findings indicate that a substantial number of defects emerge at the Ni2P crystal during the OER process,laying the groundwork for lattice oxygen involvement.Moreover,the displacement of Ni/Fe in the crystal lattice intensifies the asymmetry of the electronic structure at the metal active sites,facilitating the deprotonation process.This research introduces an innovative paradigm for the synthesis of effective and robust transition metal-based OER catalysts,with implications for sustainable energy generation technologies.展开更多
The south-western Ordos Basin is rich in low-middle rank coalbed methane(CBM)resources;while the geochemical characteristics and genetic mechanism of CBM are not clear.Herein,according to geological and geochemical te...The south-western Ordos Basin is rich in low-middle rank coalbed methane(CBM)resources;while the geochemical characteristics and genetic mechanism of CBM are not clear.Herein,according to geological and geochemical test data from gas and coal seam water from CBM wells in Bingchang,Jiaoxun,Huangling,Yonglong,and Longdong minging areas,we systematically studied the geochemical characteristics,generation,and evolution mechanism of CBM in Jurassic Yan’an Formation in the south-western Ordos Basin.The results show that the CH4 content of whole gas is in the range of 42.01%-94.72%.The distribution ranges of theδ^(13)C-CH_(4)value is−87.2‰to−32.5‰,indicating diverse sources of thermogenic gas and biogenic gas.The microbial methane is mainly generated by a CO_(2)reduction pathway,with certain methyl-type fermentation spots.Theδ^(13)C-CH_(4)has a positive correlation with burial depth,indicating the obvious fractionation of CBM.The relationship between the genetic types and burial depth of the CBM reservoir indicates that the favorable depth of secondary biogenic gas is less than 660 m.The Late Cretaceous Yanshanian Movement led to the uplift of the Ordos Basin,and a large amount of thermogenic gas escaped from the edge of the basin.Since the Paleogene Period,the coal reservoir in the basin margin has received recharge from atmospheric precipitation,which is favorable for the formation of secondary biogenic methane.The deep area,generally under 1000 m,mainly contains residual thermogenic gas.The intermediate transition zone is mixed gas.Constrained by the tectonic background,the genetic types of CBM in different mining areas are controlled by the coupling of burial depth,coal rank,and hydrogeological conditions.The Binchang mining area contains biogenic gas,and the development of CBM has achieved initial success,indicating that similar blocks with biogenic gas formation conditions is key to the efficient development of CBM.The research results provide a scientific basis for searching for favorable exploration areas of CBM in the south-western Ordos Basin.展开更多
The rotating stall mechanism is of high importance for the stability of centrifugal compressors and thermal power cycles.The majority of research concerning this topic has concentrated on the initial stall phase.Howev...The rotating stall mechanism is of high importance for the stability of centrifugal compressors and thermal power cycles.The majority of research concerning this topic has concentrated on the initial stall phase.However,the evolution of stall cells in wide-long diffusers has not been comprehensively studied.In this paper,the causes of rotating stall in the wide-long diffuser and the three-dimensional evolution mechanism of stall cells during the stall process were thoroughly analyzed.During the stall induction phase,an annulus vortex structure was found in the reverse-flow zone near the hub side of the diffuser outlet,which was the initial form of stall cells.The whole evolution process of stall cells was divided into three phases as the flow rate decreased.During the initial stall phase,the dynamic equilibrium was built under effects of the impeller wake and the adverse pressure gradient.As a result,the number of stall cells was kept at seven and the size of stall cells remained constant.During the transition phase,the flow in the diffuser became unstable.Stall cells extended to the impeller outlet,and the effect of the wake flow was strengthened significantly.Stall cells started integrating and separating regularly.As a result,the number and propagation speed of stall cells varied periodically at a constant mass flow rate.During the deep stall phase,the size of stall cells remained unchanged,and the number of stall cells kept at one.This study has important practical guidance and engineering value for the high-efficiency design and safe operation of centrifugal compressors.展开更多
基金the financial support from the National Natural Science Foundation of China(No.52109119)the Guangxi Natural Science Foundation(No.2021GXNSFBA075030)+2 种基金the Guangxi Science and Technology Project(No.Guike AD20325002)the Chinese Postdoctoral Science Fund Project(No.2022M723408)the Open Research Fund of State Key Laboratory of Simulation and Regulation of Water Cycle in River Basin(China Institute of Water Resources and Hydropower Research)(No.IWHR-SKL-202202)。
文摘The far-field microdynamic disturbance caused by the excavation of deep mineral resources and underground engineering can induce surrounding rock damage in high-stress conditions and even lead to disasters.However,the mechanical properties and damage/fracture evolution mechanisms of deep rock induced by microdynamic disturbance under three-dimensional stress states are unclear.Therefore,a true triaxial multilevel disturbance test method is proposed,which can completely simulate natural geostress,excavation stress redistribution(such as stress unloading,concentration and rotation),and subsequently the microdynamic disturbance triggering damaged rock failure.Based on a dynamic true triaxial test platform,true triaxial microdynamic disturbance tests under different frequency and amplitudes were carried out on monzogabbro.The results show that increasing amplitude or decreasing frequency diminishes the failure strength of monzogabbro.Deformation modulus gradually decreases during disturbance failure.As frequency and amplitude increase,the degradation rate of deformation modulus decreases slightly,disturbance dissipated energy increases significantly,and disturbance deformation anisotropy strengthens obviously.A damage model has been proposed to quantitatively characterize the disturbance-induced damage evolution at different frequency and amplitude under true triaxial stress.Before disturbance failure,the micro-tensile crack mechanism is dominant,and the micro-shear crack mechanism increases significantly at failure.With the increase of amplitude and frequency,the micro-shear crack mechanism increases.When approaching disturbance failure,the acoustic emission fractal dimension changes from a stable value to local large oscillation,and finally increases sharply to a high value at failure.Finally,the disturbance-induced failure mechanism of surrounding rock in deep engineering is clearly elucidated.
基金Under the auspices of Key projects of National Natural Science Foundation of China(No.41931293)。
文摘The problem of rural development arises from the evolution of rural regional system.It is urgent to deepen the research on the evolution process and mechanism of rural regional system.However,there are relatively few studies on rural development from the perspective of the evolution process,driving mechanism and evolution mechanism of rural regional system.Therefore,this study took Huang-Huai-Hai Area for example,started with the systematicness of the rural regional system,the spatio-temporal pattern and driving mechanism of rural regional system evolution,and further summarized and refined the evolution mechanism of the rural regional system.The methods of spatial pattern analysis,gray correlation degree and geographical detection were adopted.The results showed that the problems in rural areas were often dominated by one factor and produced by the joint action of many factors.Factors such as county urbanization,county economy,county public service,agricultural mechanization,surrounding cities and convenient transportation will affect the evolution of rural regional systems.Based on the evolution of the elements in the rural regional system,the evolution types of rural regional system can be divided into decline type,equilibrium type and growth type.This study can provide a reference for understanding the process of rural rise and fall and can also guide rural revitalization and rural sustainable development.
基金the support from the National Key R&D Program of China(2020YFA0710000)the National Natural Science Foundation of China(Nos.22008170,22278307,22222808,21978200)+1 种基金the Haihe Laboratory of Sustainable Chemical Transformationsthe Tianjin Research Innovation Project for Postgraduate Students(2022B KYZ035)。
文摘Water electrolysis,a process for producing green hydrogen from renewable energy,plays a crucial role in the transition toward a sustainable energy landscape and the realization of the hydrogen economy.Oxygen evolution reaction(OER)is a critical step in water electrolysis and is often limited by its slow kinetics.Two main mechanisms,namely the adsorbate evolution mechanism(AEM)and lattice oxygen oxidation mechanism(LOM),are commonly considered in the context of OER.However,designing efficient catalysts based on either the AEM or the LOM remains a topic of debate,and there is no consensus on whether activity and stability are directly related to a certain mechanism.Considering the above,we discuss the characteristics,advantages,and disadvantages of AEM and LOM.Additionally,we provide insights on leveraging the LOM to develop highly active and stable OER catalysts in future.For instance,it is essential to accurately differentiate between reversible and irreversible lattice oxygen redox reactions to elucidate the LOM.Furthermore,we discuss strategies for effectively activating lattice oxygen to achieve controllable steady-state exchange between lattice oxygen and an electrolyte(OH^(-)or H_(2)O).Additionally,we discuss the use of in situ characterization techniques and theoretical calculations as promising avenues for further elucidating the LOM.
基金supported by the National Natural Science Foundation of China(Grant No.11705086)the National Science Foundation of Hunan Province,China(Grant No.2018JJ3424)the Foundation of Hunan Educational Committee(Grant No.16C1387).
文摘Low-frequency vibrations can effectively improve natural sandstone permeability,and higher vibration frequency is associated with larger permeability.However,the optimum permeability and permeability evolution mechanism for uranium leaching and the relationship between permeability and the change of chemical reactive rate affecting uranium leaching have not been determined.To solve the above problems,in this study,identical homogeneous sandstone samples were selected to simulate lowpermeability sandstone;a permeability evolution model considering the combined action of vibration stress,pore water pressure,water flow impact force,and chemical erosion was established;and vibration leaching experiments were performed to test the model accuracy.Both the permeability and chemical reactions were found to simultaneously restrict U6þleaching,and the vibration treatment increased the permeability,causing the U6þleaching reaction to no longer be diffusion-constrained but to be primarily controlled by the reaction rate.Changes of the model calculation parameters were further analyzed to determine the permeability evolution mechanism under the influence of vibration and chemical erosion,to prove the correctness of the mechanism according to the experimental results,and to develop a new method for determining the optimum permeability in uranium leaching.The uranium leaching was found to primarily follow a process consisting of(1)a permeability control stage,(2)achieving the optimum permeability,(3)a chemical reactive rate control stage,and(4)a channel flow stage.The resolution of these problems is of great significance for facilitating the application and promotion of lowfrequency vibration in the CO_(2)+O_(2) leaching process.
基金supported by the National Natural Science Foundation of China(52122308,21905253,51973200).
文摘Developing highly active and robust oxygen evolution reaction(OER)electrocatalysts is still a critical challenge for water electrolyzers and metal-air batteries.Realizing the dynamic evolution of the intermediate and charge transfer during OER and developing a clear OER mechanism is crucial to design high-performance OER catalysts.Recently in Nature,Xue and colleagues revealed a new OER mechanism,coupled oxygen evolution mechanism(COM),which involves a switchable metal and oxygen redox under light irradiation in nickel oxyhydroxide-based materials.This newly developed mechanism requires a reversible geometric conversion between octahedron(NiO_(6))and square planar(NiO_(4))to achieve electronic states with both“metal redox”and“oxygen redox”during OER.The asymmetric structure endows NR-NiOOH with a nonoverlapping region between the dz^(2) orbitals and a_(1g)^(*)bands,which facilitate the geometric conversion and enact the COM pathway.As a result,NR-NiOOH exhibited better OER activity and stability than the traditional NiOOH.
基金supported by the National Natural Science Foundation of China(No.51074004)the Open Project of State Key Laboratory Breeding Base for Mining Disaster Prevention and Control of Shandong University of Science and Technology of China(No.MDPC2012KF06)+1 种基金the Natural Science Foundation of Anhui Province of China(No.11040606M102)Young Teachers Science Foundation of Anhui University of Science&Technology of China(No.2012QNZ14)
文摘According to the distribution of abutment stress in a stope,this research established the mechanical model of mining abutment pressure transmission in floor base on the theory of semi-infnite plate body in elasticity.This study takes the 762 working face of Haizi Coal Mine as a case in point,and analyzed the dynamic evolution law of seam floor stress during the mining process.With an organic combination of the mining floor stress and surrounding rock stress,the study obtained the change laws of the maximum principle stress and the minimum one for the floor roadway surrounding rock when mining the upper working face.Considering the non-constant pressure force state and the cracks revolution mechanisms of floor roadway surrounding rock,the research built the mechanical model of roadway stress.Simulation results verify the reliability of the above conclusions.Moreover,this model could provide the theoretical basis and technical support for controlling floor roadway surrounding rock.
基金supported by the Science and Technology Research Program of Chongqing Municipal Education Commission(KJQN202200550)the Natural Science Foundation Joint Fund for Innovation and Development of Chongqing Municipal Education Commission(CSTB2022NSCQ-LZX0077)+4 种基金the National Natural Science Foundation of China(No.52100065)the Science and Technology Research Program of Natural Science Foundation of Chongqing(cstc2021ycjh-bgzxm0037)the Science and Technology Research Program of Chongqing Municipal Education Commission(KJZD-M202200503)the Chongqing Innovation Research Group Project(No.CXQT21015)the Doctor Start/Talent Introduction Program of Chongqing Normal University(No.02060404/2020009000321)。
文摘Transition metal chalcogenides(TMCs)are recognized as pre-catalysts,and their(oxy)hydroxides derived from electrochemical reconstruction are the active species in the water oxidation.However,understanding the role of the residual chalcogen in the reconstructed layer is lacking in detail,and the corresponding catalytic mechanism remains controversial.Here,taking Cu_(1-x)Co_(x)S as a platform,we explore the regulating effect and existence form of the residual S doped into the reconstructive layer for oxygen evolution reaction(OER),where a dual-path OER mechanism is proposed.First-principles calculations and operando~(18)O isotopic labeling experiments jointly reveal that the residual S in the reconstructive layer of Cu_(1-x)Co_(x)S can wisely balance the adsorbate evolution mechanism(AEM)and lattice oxygen oxidation mechanism(LOM)by activating lattice oxygen and optimizing the adsorption/desorption behaviors at metal active sites,rather than change the reaction mechanism from AEM to LOM.Following such a dual-path OER mechanism,Cu_(0.4)Co_(0.6)S-derived Cu_(0.4)Co_(0.6)OSH not only overcomes the restriction of linear scaling relationship in AEM,but also avoids the structural collapse caused by lattice oxygen migration in LOM,so as to greatly reduce the OER potential and improved stability.
文摘Precipitation strengthening is a crucial microscopic mechanism for enhancing the strength of magnesium alloys. In order to elucidate the influence of precipitation on the microscopic deformation mechanisms and macroscopic mechanical response of magnesium alloys under cyclic loading conditions, we employed a crystal plasticity model to analyze the stress-strain curves, specific crystal plane diffraction intensities, and the temporal evolution of various microscopic deformation mechanisms and twinning volume fractions for an extruded magnesium alloy, AXM10304, containing coherent precipitates. The research findings indicate that precipitation does not fundamentally alter the microscopic mechanisms of this alloy. However, it hinders twinning during the compression stage, mildly promotes detwinning during the tension stage, and enhances tension secondary hardening by elevating the difficulty of activation of the prismatic slip.
基金supported by the National Natural Science Foundation of China(51175502)
文摘The test selection and optimization (TSO) can improve the abilities of fault diagnosis, prognosis and health-state evalua- tion for prognostics and health management (PHM) systems. Traditionally, TSO mainly focuses on fault detection and isolation, but they cannot provide an effective guide for the design for testability (DFT) to improve the PHM performance level. To solve the problem, a model of TSO for PHM systems is proposed. Firstly, through integrating the characteristics of fault severity and propa- gation time, and analyzing the test timing and sensitivity, a testability model based on failure evolution mechanism model (FEMM) for PHM systems is built up. This model describes the fault evolution- test dependency using the fault-symptom parameter matrix and symptom parameter-test matrix. Secondly, a novel method of in- herent testability analysis for PHM systems is developed based on the above information. Having completed the analysis, a TSO model, whose objective is to maximize fault trackability and mini- mize the test cost, is proposed through inherent testability analysis results, and an adaptive simulated annealing genetic algorithm (ASAGA) is introduced to solve the TSO problem. Finally, a case of a centrifugal pump system is used to verify the feasibility and effectiveness of the proposed models and methods. The results show that the proposed technology is important for PHM systems to select and optimize the test set in order to improve their performance level.
文摘Thermal stabilities of microstructure and mechanical property have been investigated on superalloy U720Li, which is of great interest of application for jet engine and land-based turbine disc. The results showed that, the primary and secondary gamma' particles maintain good thermal stability at 650 and 700 degreesC with aging time up to 3000 h, while the tertiary gamma' is apparently dependent on aging temperature and time. The tertiary gamma' particles undergo a procedure of coarsening, dissolution and eventually complete disappearance with the increasing of aging time and temperature. They exhibit unusual high sensibility upon aging temperature, which is attributed to the lattice misfit between the gamma' precipitates and the matrix in the alloy. The grain boundary phase M23C6 remains stable without forming of sigma phase even with aging time up to 3000 h at 700 degreesC. Microhardness decreases apparently with increasing aging time and aging temperature. Theoretical analysis based on dislocation mechanism indicates that the change of microhardness should be attributed to the evolution of the tertiary gamma' during aging.
文摘Microstructure evolution of wrought aluminum alloy extruded rods and the mechanism of liquid phase formation during reheating were investigated. And the relation between the volume fraction of liquid phase and the recrystallization microstructure was proposed. The results show that increase in reheating temperature and time can augment the volume fraction of liquid phase and accelerate the grain spheroidization, as a result of which the requirement of semi-solid forming can be satisfied. Due to the higher aberration energy of grain boundary, the melting point is lowered as a result of the easy diffusion of atoms. At higher reheating temperature the grain boundary melts, the growth of the recrystallized grain is inhibited and the grain is refined. The composition of the low melt-point phase along the recrystallized grains was determined using EDS. It can be seen from the experimental results that when the extrusion rod of the wrought aluminum alloy is reheated at 610℃ for 20min, perfect fine equiaxial grains can be obtained, the average grain size is about 66.34μm and the volume fraction of solid phase is about 68%.
文摘Highly supersaturated nanocrystalline fcc Fe60Cu40 alloy has been prepared by mechanical alloying of elemental powders. The phase transformation is monitored by X-ray diffraction (XRD),Mossbauer spectroscopy and extended X-ray absorption fine structure (EXAFS). The powder obtained after milling is of single fcc structure with grain size of nanometer order. The Mossbauer spectra of the milled powder can be fitted by two subspectra whose hyperfine magnetic fields are 16 MA/m and 20 MA/m while that of pure Fe disappeared. EXAFS results show that the radial structure function (RSF) of Fe K-edge changed drastically and finally became similar to that of reference Cu K-edge, while that of Cu K-edge nearly keeps unchanged in the process of milling. These imply that bcc Fe really transforms to fcc structure and alloying between Fe and Cu occurs truly on an atomic scale. EXAFS results indicate that iron atoms tend to segregate at the boundaries and Cu atoms are rich in the fcc lattice. Annealing experiments show that the Fe atoms at the interfaces are easy to cluster to α-Fe at a lower temperature, whereas the iron atoms in the lattice will form γ-Fe first at temperature above 350℃, and then transform to bcc Fe
基金This research was supported by the National Nature&Science Foundation of China“Study on the dynamic mechanism of grassland ecosystem response to climate change in Qinghai Plateau”(No.U20A2098)the second Tibetan plateau scientific expedition and research program(STEP,No.2019QZKK0804)China Huaneng Group Co.Science and Technology Program“The research development and implement on the evaluation technology of wind resource”(No.HNKJ18-H31).
文摘Land desertification is a widely concerned ecological environment problem.Studying the evolution trend of desertification types is of great significance to prevent and control land desertification.In this study,we applied the decision tree classification method,to study the land area and temporal and spatial change law of different types of desertification in the North Bank of Qinghai Lake area from 1987 to 2014,based on the current land use situation and TM remote sensing image data of Haiyan County,Qinghai Province,The results show that the area of mild desertification land and moderate desertification land in the study area has decreased,while the area of severe desertification land and extreme desertification land has increased significantly in the past 30 years.The area of desertification land decreased by 4.02 km2,of which the area of mild and moderate desertification land decreased by 39.73 km2 and 36.8 km2 respectively,and the area of severe and extreme desertification land increased by 32.78 km2 and 39.73 km2 respectively.As for the mutual transformation relationship,the transformation from severe desertification land to extreme desertification land is the main,and the junction of severe desertification land and extreme desertification land is the sensitive area of transformation.In the north shore of Qinghai Lake,the sandy land tends to expand eastward.The research provides reference basis for local land desertification monitoring,and has a great guidance for local effective land desertification and soil and water conservation.
文摘This paper deals with the geographic distribution and geological setting of the Jehol (northeastHebei-southwest Liaoning-southeast Inner Mongolia) fauna, and discusses the origination and the evolution ofits major biological groups. It is demonstrated that the Yan-Liao (northern Hebei-western Liaoning) area is theprovenance for the fauna. Why the fauna originated and developed in the area was intimately related to suchfactors as the palaeoclimate, palaeogeography, crustal movement, volcanism and frequent reversals of magnet-ic polarity at that time, in addition to the internal factors of the organisms themselves.
文摘Mechanical milling of fullerene (C60(C70)) was investigated to understand the structural evolu-tion. Mechanical milling could not destroy the molecular structure of C60(C70), while the longrange periodicity of the fCc crystalline structure was easiIy damaged. Longer miIIing time couldresult in the formation of C60(C70) polymer, including C60 dimer.
基金Supported by the Natural Science Foundation of Hubei Province under Grant No 2014CFB554
文摘The time-dependence evolution of the extinction spectra of the silver nanoplates is studied to analyze the underlying physical mechanism of the growth process. As the synthesis cycles increase, the wavelength of the absorption peak is first blue-shifted and then is followed by the red shift, attributing to the mode alteration of the longitudinal surface plasmon resonance of the silver nanoplates. The capping agents are also optimized for the convenient and speedy growth of the large integrated Ag nanostructure. These observations expand the comprehensive understanding of plasmon resonance of the Ag nanoplates, and give a better manipulation of their applications in the plasmonie nanodevices.
基金sponsored by the China Postdoctoral Science Foundation(China National Postdoctoral Program for Innovative Talents,BX20210362022M710383)the National Natural Science Foundation of China(52072040,U21A20170)。
文摘Thermal runaway(TR)of lithium-ion(Li-ion)batteries(LIBs)involves multiple forms of hazards,such as gas venting/jetting,fire,or even explosion.Explosion,as the most extreme case,is caused by the generated flammable gases,and a deflagration to detonation transition(DDT)may occur in this process.Here,overheat-to-TR tests and the corresponding outgas-induced explosion tests were conducted on 42 Ah Li-ion cells with Li[Ni_(1/3)Co_(1/3)Mn_(1/3)]O2cathode.The sum of CO_(2),H_(2),C_(2)H_(4),CO,and CH4accounted for more than 90%of the gases.Lower/upper explosion limits(LEL/UEL),laminar flame speed,and ideal stable detonation pressure were calculated to interpret the explosion characteristics and boundary.It turned out that shockwave was easily to be compressed and accelerated under higher state of charge(SOC)conditions.Thus,Li-ion cells explosion may evolve into unstable detonation in encapsulated battery pack and its evolution mechanism was explained,which provides a new idea for explosion-proof design of LIBs system.Additionally,a comprehensive assessment method was developed to intuitively characterize TR hazards.Severity of explosion presented an upward trend with the increase of SOC while the sensitivity was not the same.This study provides a further anatomy of TR,which is instructive to the safety of power battery systems.
基金supported by the National Natural Science Foundation of China(Nos.21905317 and U23B20166)the Young Elite Scientists Sponsorship Program by CAST(No.2019QNRC001)the Fundamental Research Funds for the Central Universities,Sun Yat-sen University(No.76180-31620007).
文摘The advancement of bimetallic catalysts holds significant promise for the innovation of oxygen evolution reaction(OER)catalysts.Drawing from adsorbate evolution mechanism(AEM)and lattice oxygen oxidation mechanism(LOM),the incorporation of dual active sites has the potential to foster novel OER pathways,such as the coupled oxygen evolution mechanism(COM),which can surpass the limitations of OER and elevate catalytic performance.In this study,uniformly distributed Fe/Ni dual-site Fe-Ni_(2)P@C electrocatalysts are crafted by upcycling metals in electroplating sludge via an eco-friendly and sustainable microbial engineering technique.Our findings indicate that a substantial number of defects emerge at the Ni2P crystal during the OER process,laying the groundwork for lattice oxygen involvement.Moreover,the displacement of Ni/Fe in the crystal lattice intensifies the asymmetry of the electronic structure at the metal active sites,facilitating the deprotonation process.This research introduces an innovative paradigm for the synthesis of effective and robust transition metal-based OER catalysts,with implications for sustainable energy generation technologies.
基金supported by the National Natural Science Foundation of China(Grant Nos.42130802 and 42372200)China Postdoctoral Science Foundation(No.2022M713792)+1 种基金Key Science and Technology Program of Shaanxi Province(No.2023YBGY-083)Open Fund of Key Laboratory of Coalbed Methane Resources and Reservoir Formation Process of the Ministry of Education(China University of Mining and Technology)(No.2022-007).
文摘The south-western Ordos Basin is rich in low-middle rank coalbed methane(CBM)resources;while the geochemical characteristics and genetic mechanism of CBM are not clear.Herein,according to geological and geochemical test data from gas and coal seam water from CBM wells in Bingchang,Jiaoxun,Huangling,Yonglong,and Longdong minging areas,we systematically studied the geochemical characteristics,generation,and evolution mechanism of CBM in Jurassic Yan’an Formation in the south-western Ordos Basin.The results show that the CH4 content of whole gas is in the range of 42.01%-94.72%.The distribution ranges of theδ^(13)C-CH_(4)value is−87.2‰to−32.5‰,indicating diverse sources of thermogenic gas and biogenic gas.The microbial methane is mainly generated by a CO_(2)reduction pathway,with certain methyl-type fermentation spots.Theδ^(13)C-CH_(4)has a positive correlation with burial depth,indicating the obvious fractionation of CBM.The relationship between the genetic types and burial depth of the CBM reservoir indicates that the favorable depth of secondary biogenic gas is less than 660 m.The Late Cretaceous Yanshanian Movement led to the uplift of the Ordos Basin,and a large amount of thermogenic gas escaped from the edge of the basin.Since the Paleogene Period,the coal reservoir in the basin margin has received recharge from atmospheric precipitation,which is favorable for the formation of secondary biogenic methane.The deep area,generally under 1000 m,mainly contains residual thermogenic gas.The intermediate transition zone is mixed gas.Constrained by the tectonic background,the genetic types of CBM in different mining areas are controlled by the coupling of burial depth,coal rank,and hydrogeological conditions.The Binchang mining area contains biogenic gas,and the development of CBM has achieved initial success,indicating that similar blocks with biogenic gas formation conditions is key to the efficient development of CBM.The research results provide a scientific basis for searching for favorable exploration areas of CBM in the south-western Ordos Basin.
基金supports of National Natural Science Foundation of China(No.52076079)Natural Science Foundation of Hebei Province(E2022502048,E2020502013)+1 种基金Fundamental Research Funds for the Central Universities(No.2022MS085,2023MS121)Post-graduate's Innovation Fund Project of Hebei Province(No.CXZZSS2024162,No.CXZZBS2024165)。
文摘The rotating stall mechanism is of high importance for the stability of centrifugal compressors and thermal power cycles.The majority of research concerning this topic has concentrated on the initial stall phase.However,the evolution of stall cells in wide-long diffusers has not been comprehensively studied.In this paper,the causes of rotating stall in the wide-long diffuser and the three-dimensional evolution mechanism of stall cells during the stall process were thoroughly analyzed.During the stall induction phase,an annulus vortex structure was found in the reverse-flow zone near the hub side of the diffuser outlet,which was the initial form of stall cells.The whole evolution process of stall cells was divided into three phases as the flow rate decreased.During the initial stall phase,the dynamic equilibrium was built under effects of the impeller wake and the adverse pressure gradient.As a result,the number of stall cells was kept at seven and the size of stall cells remained constant.During the transition phase,the flow in the diffuser became unstable.Stall cells extended to the impeller outlet,and the effect of the wake flow was strengthened significantly.Stall cells started integrating and separating regularly.As a result,the number and propagation speed of stall cells varied periodically at a constant mass flow rate.During the deep stall phase,the size of stall cells remained unchanged,and the number of stall cells kept at one.This study has important practical guidance and engineering value for the high-efficiency design and safe operation of centrifugal compressors.