A Mixed-Variable Experimental Design Method

Mixed-variable problems are inevitable in engineering. However, few researches pay attention to discrete variables. This paper proposed a mixed-variable experimental design method (ODCD): first, the design variables were divided into discrete variables and continuous variables;then, the DVD method was employed for handling discrete variables, the LHD method was applied for continuous variables, and finally, a Columnwise-Pairwise Algorithm was used for the overall optimization of the design matrix. Experimental results demonstrated that the ODCD method outperforms in terms of the sample space coverage performance.

Effects of Machine Tool Configuration on Its Dynamics Based on Orthogonal Experiment Method

In order to analyze the influence of configuration parameters on dynamic characteristics of machine tools in the working space, the configuration parameters have been suggested based on the orthogonal experiment method. Dynamic analysis of a milling machine, which is newly designed for producing turbine blades, has been conducted by utilizing the modal synthesis method. The finite element model is verified and updated by experimental modal analysis （EMA） of the machine tool. The result gained by modal synthesis method is compared with whole-model finite element method （FEM） result as well. According to the orthogonal experiment method, four configuration parameters of machine tool are considered as four factors for dynamic characteristics. The influence of configuration parameters on the first three natural frequencies is obtained by range analysis. It is pointed out that configuration parameter is the most important factor affecting the fundamental frequency of machine tools, and configuration parameter has less effect on lower-order modes of the system than others. The combination of configuration parameters which makes the fundamental frequency reach the maximum value is provided. Through demonstration, the conclusion can be drawn that the influence of configuration parameters on the natural frequencies of machine tools can be analyzed explicitly by the orthogonal experiment method, which offers a new method for estimating the dynamic characteristics of machine tools.

Excavation collapse of Hangzhou subway station in soft clay and numerical investigation based on orthogonal experiment method

This paper studies the excavation collapse at the Xianghu subway station on Hangzhou metro line 1.The objective is to present an overview of this case study and discuss the cause of the failure.Through field investigation and preliminary analysis,the reasons for the excavation collapse were the misuse of the soil parameters,over excavation,incorrect installation of steel struts,invalid monitoring data,and inadequate ground improvement.Finally,a small strain constitutive model was used for further analysis.In order to estimate damage efficiently,the orthogonal array(OA) was introduced for screening the key factor in the numerical experiments.Six estimated indexes including deformations and internal forces of the excavation were taken,and the effectiveness of four factors which may cause the collapse was evaluated.Through numerical experiments and interaction analysis,it is found that the deformation and internal force can be well controlled by jet grouting of the subsoil under the final cutting surface,but increasing the improvement ratio of the jet grouting cannot help optimize the excavation behavior efficiently,and without jet grouting and the fourth level struts,the deformation and internal force of the excavation in this case will far surpass the allowable value.

Potato farmers’ preference for agricultural insurance in China: An investigation using the choice experimental method

Potato insurance plays an important role in transferring agricultural risks to promote the potato staple strategy. Understanding farmers’ real preferences for potato insurance attributes is important to improve the potato insurance. In this study, a choice experiment was designed with attributes such as peril, minimum compensation ratio for production loss, types of crops covered by insurance, annual premium per mu after subsidy, and complexity of claims procedures. We constructed a mixed logit model based on a questionnaire survey of 362 potato farmers’ choices of insurance attributes from 24 villages in Dingxi City of Gansu Province using random sampling. The results show that:(1) farmers prefer agricultural insurance with widely perils including output price drop and input cost risk;(2) farmers who have suffered plant disease and insect and pest damage are willing to pay a high premium for the insurance with a high compensation ratio and several types of crops covered;full-time farmers and large-scale farmers preferred insurance products with low complexity of claims procedures. Therefore, new potato insurance design could be considered specifically for different farmer groups such as those who had previous disaster experiences, and large-or small-scale farm operations.

Numerical-experimental method for elastic parameters identification of a composite panel

A hybrid numerical-experimental approach to identify elastic modulus of a textile composite panel using vibration test data is proposed and investi- gated. Homogenization method is adopted to predict the initial values of elastic parameters of the composite, and parameter identification is transformed to an optimization problem in which the objective function is the minimization of the discrepancies between the experimental and numerical modal data. Case study is conducted employing a woven fabric reinforced composite panel. Three parameters （Ell, E22, G12） with higher sensitivities are selected to be identified. It is shown that the elastic parameters can be accurately identified from experimental modal data.

Application of orthogonal experimental design and Tikhonov regularization method for the identification of parameters in the casting solidification process

The inverse heat conduction method is one of methods to identify the casting simu- lation parameters. A new inverse method was presented according to the Tikhonov regularization theory. One appropriate regularized functional was established, and the functional was solved by the sensitivity coeffcient and Newton-Raphson iteration method. Moreover, the orthogonal experimental design was used to estimate the ap- propriate initial value and variation domain of each variable to decrease the number of iteration and improve the identification accuracy and effciency. It illustrated a detailed case of AlSi7Mg sand mold casting and the temperature measurement ex- periment was done. The physical properties of sand mold and the interfacial heat transfer coeffcient were identified at the meantime. The results indicated that the new regularization method was effcient in overcoming the ill-posedness of the inverse heat conduction problem and improving the stability and accuracy of the solutions.

Diversified Teaching Methods in Nursing:Using Animal Experimentation to Promote Core Professional Competencies in Basic Nursing Training

Objective： The aim of this project was to train highly professional and specialized nursing students from medical colleges to adapt to bedside clinical care by exploring and discussing various methods of injection and IV infusion in animal experimentation to hone the core professional nursing competencies. Methods： Two classes from the 2012 senior graduating nursing class were randomly selected by a computer to conduct the diversified practical teaching methods based on animal experimentation. A hospital environment was simulated by requiring students to perform different types of injections and practical IV infusion techniques. A comprehensive evaluation of the core professional competencies, as well as other integrated competencies, was conducted to determine the effectiveness of the teaching methods. Results： Two-sampled, pairwise u-tests were performed between the scores of the experimental （nursing class 2） and control （nursing class 1） groups. These findings showed that the overall test scores were significantly higher in the experimental group compared to the control group and that the average P-values for the competencies in various categories were 〈0.01, which indicated statistically significant results. Conclusions： Based on the data from this project, diversified teaching methods for basic nursing training founded on animal experimentation can help nursing students perfect their core professional competencies and improve their overall professional standing. The introduction of animal experimentation requires further verification, and an increased acknowledgement of its benefits through the widespread dissemination of this information.

Experimental validation method of elastic thin rod model for simulating the motional cable harness

To analyze the spring disturbance torque caused by motionai cable harness in a stabilized platform, the Kirchhoff theory based cable harness model has been previously developed to dynamically simulate the motional cable harness. In this paper, this model was validated by comparing the simulation results with the experiment results （ both the spring force and the deformed profile of the motional cable harness）. In the experiment, a special optical measuring instrument based on binocular vision was developed and the motion and deformation of cable harness were measured. A simpli- fied stabilized platform system was constructed, and the absolute value of spring disturbance force during the motion of this simplified frame was obtained by using a force gauge （0. 02 N precision）. The physical parameters of experimental specimen were also measured. The experimental and simulated results showed good agreement. These results should be useful for better motional cable harness layout design and reliable evaluation of the spring disturbance torque.

An Experimental Method to Read Novels Without Literary Criticism

Though novel reading is a common experience to everybody,little has been researched to help average readers to understand a novel.In practice,there are two ways for them to understand a novel:one is to use literary criticism theories and the other is to refer to professional critics'criticism directly.However,the trouble is that the two methods are either time-consuming or far from convincing.In this paper,an experimental reading method is discussed to help average readers enhance reading experience.It aims at reaching the goal of reading without criticism,which,through making clear the aim of reading,putting main focus on the story only,will help readers to have a better understanding of reading.

Partition method and experimental validation for impact dynamics of flexible multibody system

The impact problem of a flexible multibody system is a non-smooth, high-transient, and strong-nonlinear dynamic process with variable boundary. How to model the contact/impact process accurately and efficiently is one of the main difficulties in many engineering applications. The numerical approaches being used widely in impact analysis are mainly from two fields： multibody system dynamics （MBS） and computational solid mechanics （CSM）. Approaches based on MBS provide a more efficient yet less accurate analysis of the contact/impact problems, while approaches based on CSM are well suited for particularly high accuracy needs, yet require very high computational effort. To bridge the gap between accuracy and efficiency in the dynamic simulation of a flexible multibody system with contacts/impacts, a partition method is presented considering that the contact body is divided into two parts, an impact region and a non-impact region. The impact region is modeled using the finite element method to guarantee the local accuracy, while the non-impact region is modeled using the modal reduction approach to raise the global efficiency. A three-dimensional rod-plate impact experiment is designed and performed to validate the numerical results. The principle for how to partition the contact bodies is proposed： the maximum radius of the impact region can be estimated by an analytical method, and the modal truncation orders of the non-impact region can be estimated by the highest frequency of the signal measured. The simulation results using the presented method are in good agreement with the experimental results. It shows that this method is an effec-rive formulation considering both accuracy and efficiency. Moreover, a more complicated multibody impact problem of a crank slider mechanism is investigated to strengthen this conclusion.

Systematical approach in evaluation of LC method for determination of raloxifene hydrochloride and its impurities employing experimental design

Method validation presents a detailed investigation of analytical method and provision of the evidence that the method, when correctly applied, produces results that fit to the purpose. In order to achieve the method validation scope efficiently, experimental design presents a very useful tool. The greatest benefits of such approach could be seen in robustness testing through the provision of very useful data about the control of the chromatograp6hic system during the routine application. In this paper, robustness testing of the LC method proposed for the determination of raloxifene hydrochloride and its four impurities was done employing Plackett-Burman design. Applying this design, the effect of five real factors （acetonitrile content, sodium dodecyl sulfate content, column temperature, pH of the mobile phase and flow rate） on the corresponding resolution factors was investigated through twelve experiments. Furthermore, the insignificance intervals for significant factors were calculated and the parameters for system suitability tests were defined. Eventually, the other validation parameters were tested and the effectiveness of the proposed analytical method with a high degree of accuracy was confirmed.

RECONSTRUCTION OF PART OF AN ACTUAL BLAST-WAVE FLOW FIELD TO AGREE WITH EXPERIMENTAL DATA BY USING NUMERICAL METHOD WITH HIGH IDENTIFICATION

In this paper, on the basis of experimental data of two kinds of chemical explosions, the piston-pushing model of spherical blast-waves and the second-order Godunov-type scheme of finite difference methods with high identification to discontinuity are used to the numerical reconstruction of part of an actual hemispherical blast-wave flow field by properly adjusting the moving bounary conditions of a piston. This method is simple and reliable. It is suitable to the evaluation of effects of the blast-wave flow field away from the explosion center.

Natural Monopoly and Mixed Ownership Reform--Based on Natural Experiment and Cost Function Analysis Method

Despite a multitude of theoretical discussions on China's mixed ownership reform, very few studies have addressed realistic questions concerning the implementation of the reform. The Resolutions of the Third Plenum of the 18 th CPC Central Committee and other reform strategies have outlined the reform of sectors with natural monopoly, including urban public utility sectors. The question is how mixed ownership reform should be carried out in sectors of natural monopoly, or which public utilities sectors should enjoy priority of mixed ownership reform. To answer this question, this paper employs data of large public utility enterprises in China from 1998 to 2008, and estimates the natural monopoly attribute at the industry level and corporate total factor productivity(TFP) using cost function analysis method excluding the impact of product price factor. Based on the difference-indifferences-in-differences(DDD) method of natural experiment, an empirical test is carried out for the relationship among natural monopoly, mixed ownership reform and corporate productivity. Our results suggest that:(1) Statistically, mixed ownership reform cannot significantly increase corporate TFP in sectors with natural monopoly;(2) mixed ownership reform should not be carried out indiscriminately on a nationwide basis and for all public utilities sectors. Such an attempt of reform without distinguishing natural monopoly and the level of competitiveness is fraught with policy uncertainties;(3) relative to sectors with natural monopoly, corporate productivity in competitive sectors after mixed ownership reform will improve more significantly and enjoy greater "policy dividends" of institutional reform. Therefore, mixed ownership reform should be carried out first in competitive sectors.

AN EXPERIMENTAL-NUMERICAL METHOD FOR MEASURING CRACK PROPAGATING VELOCITIES UNDER STRESS WAVE LOADING

An experimental-numerical method for measuring dynamic crack propagatingvelocities under stress wave loading is established in this paper. The experiments of thethree-point bend specimen are done on the improved Hopkinson bar. Deflection of loading point,dynamic load and instantaneous crack length are measured, then crack propagating velocities arecalculated. Experiments on 40Cr steel show that the results given by this method have a goodagreement with that obtained by the resistance fracture gage method. Therefore this method isfeasible for measuring crack propagating velocities under high loading rate and will have wideapplication.

Visual Passive Ranging Method Based on Re-entrant Coaxial Optical Path and Experimental Verification

To overcome the shortcomings of the traditional passive ranging technology based on image, such as poor ranging accuracy, low reliability and complex system, a new visual passive ranging method based on re-entrant coaxial optical path is presented. The target image is obtained using double cameras with coaxial optical path. Since there is imaging optical path difference between the cameras, the images are different. In comparison of the image differences, the target range could be reversed. The principle of the ranging method and the ranging model are described. The relationship among parameters in the ranging process is analyzed quantitatively. Meanwhile,the system composition and technical realization scheme are also presented. Also, the principle of the method is verified by the equivalent experiment. The experimental results show that the design scheme is correct and feasible with good robustness. Generally, the ranging error is less than 10% with good convergence. The optical path is designed in a re-entrant mode to reduce the volume and weight of the system. Through the coaxial design,the visual passive range of the targets with any posture can be obtained in real time. The system can be widely used in electro-optical countermeasure and concealed photoelectric detection.

EFFECTS OF REACTION AND PROCESSING PARAMETERS ON ETHYLENE POLYMERIZATION USING DIFFERENT ZIEGLER-NATTA CATALYSTS:EMPLOYMENT OF TAGUCHI EXPERIMENTAL DESIGN AND RESPONSE SURFACE METHOD

Different Ziegler-Natta catalysts were employed to polymerize ethylene. To investigate the influences of reaction parameters, namely Al/Ti molar ratio, hydrogen and processing parameters, i.e. ethylene pressure and temperature, a Taguchi experimental design was worked out. An L27 orthogonal array was chosen to take the above-mentioned parameters and relevant interactions into account. Response surface method was the tool used to analyze the experimental design results. Al/Ti, ethylene pressure and temperature were selected as experimental design factors, and catalyst activity and polymerization yield were the response parameters. Increasing pressure, due to an increment in monomer accessibility, and rising Al/Ti, because of higher reduction in the catalysts, cause an increase in both polymerization yield and catalyst activity. Nonetheless, a higher temperature, thanks to reducing ethylene solubility in the slurry medium and partially catalyst destruction, lead to a reduction in both response parameters. A synergistic effect was also observed between temperature and pressure. All catalyst activities will reduce in the presence of hydrogen. Molecular weight also shows a decline in the presence of hydrogen as a transfer agent. However, the polydispersity index remains approximately intact. Using SEM, various morphologies, owing to different catalyst morphologies, were seen for the polyethylene.

Experimental Characterization of Rutting Performance of HMA Designed with Aggregate Gradations According to Superpave and Marshall Methods

The permanent deformation (rutting) of pavement is a major distress in flexible pavement. It is related to vehicles properties and/or pavement materials and conditions. This article presents an extensive experimental investigation in order to compare between the aggregate gradation according to Superpave and Marshall methods of asphalt concrete mix design on pavement rutting and to examine the sensitivity of rutting resistance to aggregate gradation. A wheel truck machine has been used for measurement of pavement rutting (permanent deformation). The tests were carried out at two controlled different air temperature 55℃ and 25℃. The results obtained showed that the adopting of aggregate gradation procedure of Superpave method of pavement mix design for Marshall method of asphalt concrete mix design can reduce the pavement rutting by about 50%. This achievement may be related to missing of three sieves in aggregate gradation procedure of Marshall method which controls rounded and finer aggregate particles. These sieves provide more continuity for aggregate gradation to ensure filling unnecessary gaps and produce more contact points between the aggregates in Hot Mix Asphalt (HMA). The outputs of the research support modifying Marshall method of asphalt concrete mix design by adopting aggregate gradation proposed in Superpave method. The results of study also showed that the coarser aggregate provided more resistance to pavement rutting.

钻柱动力学研究进展及发展趋势

钻柱动力学是安全、高效钻井的基础,许多研究人员对此进行了深入研究,成果累累。然而,钻柱具有超大长细比,工作环境恶劣,非线性特征显著,使得钻柱的安全性面临严峻挑战,这在超万米特深井中尤为突出。因此,把握钻柱动力学研究历程,提炼钻柱动力学核心关键问题十分必要。本文在简要回顾3种基本钻柱振动形式的研究进展基础上,重点阐述了这3种基本振动的耦合振动的研究进展,详细讨论了粘滑和涡动这2种复杂振动的危害、形成机制、研究方法、测量技术和控制方法,并对近十年来备受关注的高频扭转振动(HFTO)的研究进展进行了归纳。现有研究成果表明,涡动是井下钻柱最易出现的一种复杂振动形式,包括向前、向后规则涡动和不规则涡动形式,且大都体现为不规则涡动。其中,反向涡动对钻柱的危害很大,不但会加剧钻具的疲劳破坏,而且会降低钻头的机械钻速。粘滑振动是另一种危害极大的复杂振动形式,其形成机制在于钻头与岩石之间的相互作用,并可用速度弱化效应进行很好描述;粘滑振动与涡动密切相关,粘滑振动中的滑脱阶段的最大转速可能达到地面转速的3倍以上,并伴随着剧烈的涡动。而振动频率远高于涡动和粘滑振动的高频扭转振动的危害不容忽视,但相关机理远未探明,迫切需要攻关研究。