Adaptive State Feedback Predictive Control and Expert Control for a Delayed Coking Furnace

An adaptive state feedback predictive control （SFPC） scheme and an expert control scheme are presented and applied to the temperature control of a 1200 kt·a^-1 delayed coking furnace, which is the key equipment for the delayed coking process. Adaptive SFPC is used to improve the performance of temperature control in normal operation. A simplified nonlinear model on the basis of first principles of the furnace is developed to obtain a state space model by linearization. Taking advantage of the nonlinear model, an online model adapting method is presented to accommodate the dynamic change of process characteristics because of tube coking and load changes. To compensate the large inverse response of outlet temperature resulting from the sudden increase of injected steam of a particular velocity to tubes, a monitoring method and an expert control scheme based on heat balance calculation are proposed. Industrial implementation shows the effectiveness and feasibility of the proposed control strategy.

Expert S-surface control for autonomous underwater vehicles

S-surface control has proven to be an effective means for motion control of underwater autonomous vehicles(AUV).However there are still problems maintaining steady precision of course due to the constant need to adjust parameters,especially where there are disturbing currents.Thus an intelligent integral was introduced to improve precision.An expert S-surface control was developed to tune the parameters on-line,based on the expert system,it provides S-surface control according to practical experience and control knowledge.To prevent control output over-compensation,a fuzzy neural network was included to adjust the production rules to the knowledge base.Experiments were conducted on an AUV simulation platform,and the results show that the expert S-surface controller performs better than an S-surface controller in environments with currents,producing good steady precision of course in a robust way.

EXPERT SYSTEM FOR SINTER CHEMICAL COMPOSITION CONTROL BASED ON ADAPTIVE PREDICTION

In order to stabilize the sinter chemical composition,the expert system for composition control based on adaptive prediction has been developed on the basis of modern control theory and artificial intelligence.It has been verified by using real data at No.3 Sintering Plant of Anshan Iron and Steel Co.,and satisfactory results have been obtained.

Design and implementation of an expert system for remote fault diagnosis in ship lift

In this paper an expert system for remote fault diagnosis in the ship lift was developed by analysis of the fault tree and combination with VPN. The fault tree was constructed based on the operation condition of the ship lift. The diagnosis model was constructed by hierarchical classification of the fault tree structure, and the inference mechanism was given. Logical structure of the fault diagnosis in the ship lift was proposed. The implementation of the expert system for remote fault diagnosis in the ship lift was discussed, and the expert system developed was realized on the VPN virtual network. The system was applied to the Gaobaozhou ship lift project, and it ran successfully.

Research on rapid development platform of PLC control system

In the field of industrial process control,a fast-development platform for programmable logic controller(PLC)systems is designed in order to solve two main problems of rapid development of PLC control system and programmability of controlling software.In the aspect of design,the platform is composed of hardware controlling and software monitoring and is taking industrial computer as the core.Under the Windows environment,the platform establishes the control instruction set,develops the configuration function and visual programming function of the monitoring software and it integrates PLC controller based on Visual Basic software.In order to achieve the function of data monitoring,it has realized the serial communication between computer and PLC by using RS-485 and RS-232 serial ports line communication.The platform designs the intelligent instruction scheduling strategy by studying the encoding and decoding rules of the communication instruction set.It proposes a method for rapidly developing control programs by adopting the expert control mode,which enables clients to develop and modify programs conveniently by importing instructions in a non-coded manner.After experimental testing,the platform is proved successful achieving both the rapid development of PLC control system and the rapid modification of monitoring software.

Intelligent Control Scheme of Engineering Machinery of Cluster Hybrid System

In a hybrid system, the subsystems with discrete dynamics play a central role in a hybrid system. In the course of engineering machinery of cluster construction, the discrete control law is hard to obtain because the construction environment is complex and there exist many affecting factors. In this paper, hierarchically intelligent control, expert control and fuzzy control are introduced into the discrete subsystems of engineering machinery of cluster hybrid system, so as to rebuild the hybrid system and make the discrete control law easily and effectively obtained. The structures, reasoning mechanism and arithmetic of intelligent control are replanted to discrete dynamic, conti- nuous process and the interface of the hybrid system. The structures of three types of intelligent hybrid system are presented and the human experiences summarized from engineering machinery of cluster are taken into account.

INTELLIGENT CAD OF CRANE TRAVELLING MECHANISMS

Based on common characteristics in crane design, a new procedure of intelligent CAD for crane travelling mechanisms is proposed. The CAD used for crane travelling mechanisms is usually involved in choosing electrical motors.gear reducers,brakes and couplings, arranging travelling wheels and equilibrium beams.checking temperature increase of motors and slippage of driving wheels,estimating the time used for starting and stopping the cranes, drawing up the travelling mechanism.and so on. By enhancing the CAD, the related expert system and overall intelligent con trol are further developed here in treated as individual module. Accordingly,the intelligent CAD is constructed by combing the CAD with the two modules.

Intelligent Control of Grate-kiln-cooler Process of Iron Ore Pellets Using a Combination of Expert System Approach and Takagi-Sugeno Fuzzy Model

Grate-kiln-cooler has become a major process of producing iron ore pellets in China. Due to the diversity of the raw materials used and the multi-device multi-variable characteristics,this process still encounters with control problem. An attempt was proposed to deal with this issue. The three-device-integrated feature of the process was firstly analyzed to obtain control strategy,and then an intelligent control system using a combination of expert system approach and Takagi-Sugeno（ T-S） fuzzy model was developed. Expert system approach was used to diagnose and remedy the abnormal conditions,while T-S fuzzy model was used to stabilize the thermal state. In the construction of T-S fuzzy rules,antecedents were identified by fuzzy c-mean clustering algorithm incorporated with subtractive clustering algorithm,and consequent parameters were identified by recursive least square algorithm. The control system was applied in a Chinese pelletizing plant and the application results demonstrated its effectiveness of stabilizing the thermal states within three devices.

An intelligent control method for a large multi-parameter environmental simulation cabin

The structure and characteristics of a large multi-parameter environmental simulation cabin are introduced.Due to the diffculties of control methods and the easily damaged characteristics,control systems for the large multi-parameter environmental simulation cabin are diffcult to be controlled quickly and accurately with a classical PID algorithm.Considering the dynamic state characteristics of the environmental simulation test chamber,a lumped parameter model of the control system is established to accurately control the multiple parameters of the environmental chamber and a fuzzy control algorithm combined with expert-PID decision is introduced into the temperature,pressure,and rotation speed control systems.Both simulations and experimental results have shown that compared with classical PID control,this fuzzy-expert control method can decrease overshoot as well as enhance the capacity of anti-dynamic disturbance with robustness.It can also resolve the contradiction between rapidity and small overshoot,and is suitable for application in a large multi-parameter environmental simulation cabin control system.